aboutsummaryrefslogtreecommitdiff
path: root/accel
AgeCommit message (Collapse)AuthorFilesLines
2019-10-03accel/kvm: ensure ret always setAlex Bennée1-3/+3
Some of the cross compilers rightly complain there are cases where ret may not be set. 0 seems to be the reasonable default unless particular slot explicitly returns -1. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-30kvm: split too big memory section on several memslotsIgor Mammedov1-44/+80
Max memslot size supported by kvm on s390 is 8Tb, move logic of splitting RAM in chunks upto 8T to KVM code. This way it will hide KVM specific restrictions in KVM code and won't affect board level design decisions. Which would allow us to avoid misusing memory_region_allocate_system_memory() API and eventually use a single hostmem backend for guest RAM. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190924144751.24149-4-imammedo@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-30kvm: clear dirty bitmaps from all overlapping memslotsPaolo Bonzini1-14/+22
Currently MemoryRegionSection has 1:1 mapping to KVMSlot. However next patch will allow splitting MemoryRegionSection into several KVMSlot-s, make sure that kvm_physical_log_slot_clear() is able to handle such 1:N mapping. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20190924144751.24149-3-imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-30kvm: extract kvm_log_clear_one_slotPaolo Bonzini1-46/+57
We may need to clear the dirty bitmap for more than one KVM memslot. First do some code movement with no semantic change. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20190924144751.24149-2-imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [fixup line break]
2019-09-25cputlb: Pass retaddr to tb_check_watchpointRichard Henderson2-4/+4
Fixes the previous TLB_WATCHPOINT patches because we are currently failing to set cpu->mem_io_pc with the call to cpu_check_watchpoint. Pass down the retaddr directly because it's readily available. Fixes: 50b107c5d61 Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Pass retaddr to tb_invalidate_phys_page_fastRichard Henderson3-26/+22
Rather than rely on cpu->mem_io_pc, pass retaddr down directly. Within tb_invalidate_phys_page_range__locked, the is_cpu_write_access parameter is non-zero exactly when retaddr would be non-zero, so that is a simple replacement. Recognize that current_tb_not_found is true only when mem_io_pc (and now retaddr) are also non-zero, so remove a redundant test. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Remove tb_invalidate_phys_page_range is_cpu_write_accessRichard Henderson2-6/+3
All callers pass false to this argument. Remove it and pass the constant on to tb_invalidate_phys_page_range__locked. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Remove cpu->mem_io_vaddrRichard Henderson1-2/+0
With the merge of notdirty handling into store_helper, the last user of cpu->mem_io_vaddr was removed. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Handle TLB_NOTDIRTY in probe_accessRichard Henderson1-9/+17
We can use notdirty_write for the write and return a valid host pointer for this case. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Merge and move memory_notdirty_write_{prepare,complete}Richard Henderson1-34/+42
Since 9458a9a1df1a, all readers of the dirty bitmaps wait for the rcu lock, which means that they wait until the end of any executing TranslationBlock. As a consequence, there is no need for the actual access to happen in between the _prepare and _complete. Therefore, we can improve things by merging the two functions into notdirty_write and dropping the NotDirtyInfo structure. In addition, the only users of notdirty_write are in cputlb.c, so move the merged function there. Pass in the CPUIOTLBEntry from which the ram_addr_t may be computed. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Partially inline memory_region_section_get_iotlbRichard Henderson1-24/+42
There is only one caller, tlb_set_page_with_attrs. We cannot inline the entire function because the AddressSpaceDispatch structure is private to exec.c, and cannot easily be moved to include/exec/memory-internal.h. Compute is_ram and is_romd once within tlb_set_page_with_attrs. Fold the number of tests against these predicates. Compute cpu_physical_memory_is_clean outside of the tlb lock region. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Move NOTDIRTY handling from I/O path to TLB pathRichard Henderson1-3/+23
Pages that we want to track for NOTDIRTY are RAM. We do not really need to go through the I/O path to handle them. Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Move ROM handling from I/O path to TLB pathRichard Henderson1-15/+21
It does not require going through the whole I/O path in order to discard a write. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Introduce TLB_BSWAPRichard Henderson1-29/+43
Handle bswap on ram directly in load/store_helper. This fixes a bug with the previous implementation in that one cannot use the I/O path for RAM. Fixes: a26fc6f5152b47f1 Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Split out load/store_memopRichard Henderson1-52/+55
We will shortly be using these more than once. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Use qemu_build_not_reached in load/store_helpersRichard Henderson1-3/+2
Increase the current runtime assert to a compile-time assert. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-25cputlb: Disable __always_inline__ without optimizationRichard Henderson1-2/+2
This forced inlining can result in missing symbols, which makes a debugging build harder to follow. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-13atomic_template: fix indentation in GEN_ATOMIC_HELPEREmilio G. Cota1-1/+1
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-04Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into stagingPeter Maydell2-182/+262
Allow page table bit to swap endianness. Reorganize watchpoints out of i/o path. Return host address from probe_write / probe_access. # gpg: Signature made Tue 03 Sep 2019 16:47:50 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20190903: (36 commits) tcg: Factor out probe_write() logic into probe_access() tcg: Make probe_write() return a pointer to the host page s390x/tcg: Pass a size to probe_write() in do_csst() hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well tcg: Enforce single page access in probe_write() tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code s390x/tcg: Fix length calculation in probe_write_access() s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access() tcg: Check for watchpoints in probe_write() cputlb: Handle watchpoints via TLB_WATCHPOINT cputlb: Remove double-alignment in store_helper cputlb: Fix size operand for tlb_fill on unaligned store exec: Factor out cpu_watchpoint_address_matches cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK exec: Factor out core logic of check_watchpoint() exec: Move user-only watchpoint stubs inline target/sparc: sun4u Invert Endian TTE bit target/sparc: Add TLB entry with attributes cputlb: Byte swap memory transaction attribute ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-03tcg: Factor out probe_write() logic into probe_access()David Hildenbrand2-17/+52
Let's also allow to probe other access types. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190830100959.26615-3-david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03tcg: Make probe_write() return a pointer to the host pageDavid Hildenbrand2-7/+20
... similar to tlb_vaddr_to_host(); however, allow access to the host page except when TLB_NOTDIRTY or TLB_MMIO is set. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190830100959.26615-2-david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03tcg: Enforce single page access in probe_write()David Hildenbrand2-0/+4
Let's enforce the interface restriction. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190826075112.25637-5-david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x codeDavid Hildenbrand1-0/+14
Factor it out into common code. Similar to the !CONFIG_USER_ONLY variant, let's not allow to cross page boundaries. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190826075112.25637-4-david@redhat.com> [rth: Move cpu & cc variables inside if block.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03tcg: Check for watchpoints in probe_write()David Hildenbrand1-2/+13
Let size > 0 indicate a promise to write to those bytes. Check for write watchpoints in the probed range. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190823100741.9621-10-david@redhat.com> [rth: Recompute index after tlb_fill; check TLB_WATCHPOINT.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03cputlb: Handle watchpoints via TLB_WATCHPOINTRichard Henderson1-10/+79
The raising of exceptions from check_watchpoint, buried inside of the I/O subsystem, is fundamentally broken. We do not have the helper return address with which we can unwind guest state. Replace PHYS_SECTION_WATCH and io_mem_watch with TLB_WATCHPOINT. Move the call to cpu_check_watchpoint into the cputlb helpers where we do have the helper return address. This allows watchpoints on RAM to bypass the full i/o access path. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03cputlb: Remove double-alignment in store_helperRichard Henderson1-2/+1
We have already aligned page2 to the start of the next page. There is no reason to do that a second time. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03cputlb: Fix size operand for tlb_fill on unaligned storeRichard Henderson1-1/+4
We are currently passing the size of the full write to the tlb_fill for the second page. Instead pass the real size of the write to that page. This argument is unused within all tlb_fill, except to be logged via tracing, so in practice this makes no difference. But in a moment we'll need the value of size2 for watchpoints, and if we've computed the value we might as well use it. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03cputlb: Fold TLB_RECHECK into TLB_INVALID_MASKRichard Henderson1-63/+23
We had two different mechanisms to force a recheck of the tlb. Before TLB_RECHECK was introduced, we had a PAGE_WRITE_INV bit that would immediate set TLB_INVALID_MASK, which automatically means that a second check of the tlb entry fails. We can use the same mechanism to handle small pages. Conserve TLB_* bits by removing TLB_RECHECK. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03cputlb: Byte swap memory transaction attributeTony Nguyen1-0/+12
Notice new attribute, byte swap, and force the transaction through the memory slow path. Required by architectures that can invert endianness of memory transaction, e.g. SPARC64 has the Invert Endian TTE bit. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <2a10a1f1c00a894af1212c8f68ef09c2966023c1.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03memory: Single byte swap along the I/O pathTony Nguyen1-39/+3
Now that MemOp has been pushed down into the memory API, and callers are encoding endianness, we can collapse byte swaps along the I/O path into the accelerator and target independent adjust_endianness. Collapsing byte swaps along the I/O path enables additional endian inversion logic, e.g. SPARC64 Invert Endian TTE bit, with redundant byte swaps cancelling out. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Message-Id: <911ff31af11922a9afba9b7ce128af8b8b80f316.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03cputlb: Replace size and endian operands for MemOpTony Nguyen1-89/+81
Preparation for collapsing the two byte swaps adjust_endianness and handle_bswap into the former. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <755b7104410956b743e1f1e9c34ab87db113360f.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03memory: Access MemoryRegion with endiannessTony Nguyen1-2/+6
Preparation for collapsing the two byte swaps adjust_endianness and handle_bswap into the former. Call memory_region_dispatch_{read|write} with endianness encoded into the "MemOp op" operand. This patch does not change any behaviour as memory_region_dispatch_{read|write} is yet to handle the endianness. Once it does handle endianness, callers with byte swaps can collapse them into adjust_endianness. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03cputlb: Access MemoryRegion with MemOpTony Nguyen1-4/+4
The memory_region_dispatch_{read|write} operand "unsigned size" is being converted into a "MemOp op". Convert interfaces by using no-op size_memop. After all interfaces are converted, size_memop will be implemented and the memory_region_dispatch_{read|write} operand "unsigned size" will be converted into a "MemOp op". As size_memop is a no-op, this patch does not change any behaviour. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <c4571c76467ade83660970f7ef9d7292297f1908.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03tcg: TCGMemOp is now accelerator independent MemOpTony Nguyen1-1/+1
Preparation for collapsing the two byte swaps, adjust_endianness and handle_bswap, along the I/O path. Target dependant attributes are conditionalized upon NEED_CPU_H. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03atomic_template: fix indentation in GEN_ATOMIC_HELPEREmilio G. Cota1-1/+1
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190828165307.18321-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-08-21' ↵Peter Maydell1-1/+1
into staging Monitor patches for 2019-08-21 # gpg: Signature made Wed 21 Aug 2019 16:35:07 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2019-08-21: monitor/qmp: Update comment for commit 4eaca8de268 qdev: Collect HMP handlers command handlers in qdev-monitor.c qapi: Move query-target from misc.json to machine.json hw/core: Move cpu.c, cpu.h from qom/ to hw/core/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21hw/core: Move cpu.c, cpu.h from qom/ to hw/core/Markus Armbruster1-1/+1
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190709152053.16670-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h in comments replaced]
2019-08-20icount: remove unnecessary gen_io_end callsPavel Dovgalyuk1-1/+0
Prior patch resets can_do_io flag at the TB entry. Therefore there is no need in resetting this flag at the end of the block. This patch removes redundant gen_io_end calls. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
2019-08-20icount: clean up cpu_can_io at the entry to the blockPavel Dovgalyuk1-1/+0
Most of IO instructions can be executed only at the end of the block in icount mode. Therefore translator can set cpu_can_io flag when translating the last instruction. But when the blocks are chained, then this flag is not reset and may remain set at the beginning of the next block. This patch resets the flag at the entry of any translation block, making I/O operations impossible by default. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> -- v2 changes: - reset can_do_io at the start of every TB (suggested by Paolo Bonzini) Message-Id: <156404428943.18669.15747009371169578935.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-0/+1
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include sysemu/sysemu.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster1-1/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Clean up inclusion of exec/cpu-common.hMarkus Armbruster1-1/+0
migration/qemu-file.h neglects to include it even though it needs ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-14-armbru@redhat.com>
2019-07-19hmp: Print if memory section is registered with an acceleratorAlexey Kardashevskiy1-0/+38
This adds an accelerator name to the "into mtree -f" to tell the user if a particular memory section is registered with the accelerator; the primary user for this is KVM and such information is useful for debugging purposes. This adds a has_memory() callback to the accelerator class allowing any accelerator to have a label in that memory tree dump. Since memory sections are passed to memory listeners and get registered in accelerators (rather than memory regions), this only prints new labels for flatviews attached to the system address space. An example: Root memory region: system 0000000000000000-0000002fffffffff (prio 0, ram): /objects/mem0 kvm 0000003000000000-0000005fffffffff (prio 0, ram): /objects/mem1 kvm 0000200000000020-000020000000003f (prio 1, i/o): virtio-pci 0000200080000000-000020008000003f (prio 0, i/o): capabilities Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20190614015237.82463-1-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15kvm: Support KVM_CLEAR_DIRTY_LOGPeter Xu2-0/+183
Firstly detect the interface using KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 and mark it. When failed to enable the new feature we'll fall back to the old sync. Provide the log_clear() hook for the memory listeners for both address spaces of KVM (normal system memory, and SMM) and deliever the clear message to kernel. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20190603065056.25211-11-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-07-15kvm: Introduce slots lock for memory listenerPeter Xu1-12/+46
Introduce KVMMemoryListener.slots_lock to protect the slots inside the kvm memory listener. Currently it is close to useless because all the KVM code path now is always protected by the BQL. But it'll start to make sense in follow up patches where we might do remote dirty bitmap clear and also we'll update the per-slot cached dirty bitmap even without the BQL. So let's prepare for it. We can also use per-slot lock for above reason but it seems to be an overkill. Let's just use this bigger one (which covers all the slots of a single address space) but anyway this lock is still much smaller than the BQL. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20190603065056.25211-10-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-07-15kvm: Persistent per kvmslot dirty bitmapPeter Xu1-3/+7
When synchronizing dirty bitmap from kernel KVM we do it in a per-kvmslot fashion and we allocate the userspace bitmap for each of the ioctl. This patch instead make the bitmap cache be persistent then we don't need to g_malloc0() every time. More importantly, the cached per-kvmslot dirty bitmap will be further used when we want to add support for the KVM_CLEAR_DIRTY_LOG and this cached bitmap will be used to guarantee we won't clear any unknown dirty bits otherwise that can be a severe data loss issue for migration code. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190603065056.25211-9-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-07-15kvm: Update comments for sync_dirty_bitmapPeter Xu1-6/+6
It's obviously obsolete. Do some update. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20190603065056.25211-8-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.1 at 2024-12-28 05:10:50 +0000