aboutsummaryrefslogtreecommitdiff
path: root/accel
AgeCommit message (Collapse)AuthorFilesLines
2020-10-08accel/tcg: Fix computing of is_write for MIPSKele Huang1-4/+39
Detect all MIPS store instructions in cpu_signal_handler for all available MIPS versions, and set is_write if encountering such store instructions. This fixed the error while dealing with self-modified code for MIPS. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Kele Huang <kele.hwang@gmail.com> Signed-off-by: Xu Zou <iwatchnima@gmail.com> Message-Id: <20201002081420.10814-1-kele.hwang@gmail.com> [rth: Use uintptr_t for pc to fix n32 build error.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-10-06gdbstub: add reverse step support in replay modePavel Dovgalyuk1-0/+1
GDB remote protocol supports two reverse debugging commands: reverse step and reverse continue. This patch adds support of the first one to the gdbstub. Reverse step is intended to step one instruction in the backwards direction. This is not possible in regular execution. But replayed execution is deterministic, therefore we can load one of the prior snapshots and proceed to the desired step. It is equivalent to stepping one instruction back. There should be at least one snapshot preceding the debugged part of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> -- v4 changes: - inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée) Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06replay: don't record interrupt pollPavel Dovgalyuk1-3/+18
Interrupt poll is not a real interrupt event. It is needed only for thread safety. This interrupt is used for i386 and converted to hardware interrupt by cpu_handle_interrupt function. Therefore it is not needed to be recorded, because hardware interrupt will be recorded after converting. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> -- v4 changes: - Condition check refactoring (suggested by Alex Bennée) Message-Id: <160174517124.12451.12983410242461131737.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05accel/tcg: use current_machine as it is always set for softmmuClaudio Fontana1-10/+1
current_machine is always set before accelerators are initialized, so use that instead of MACHINE(qdev_get_machine()). Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05kvm: kvm_init_vcpu take Error pointerDr. David Alan Gilbert4-12/+18
Clean up the error handling in kvm_init_vcpu so we can see what went wrong more easily. Make it take an Error ** and fill it out with what failed, including the cpu id, so you can tell if it only fails at a given ID. Replace the remaining DPRINTF by a trace. This turns a: kvm_init_vcpu failed: Invalid argument into: kvm_init_vcpu: kvm_get_vcpu failed (256): Invalid argument and with the trace you then get to see: 19049@1595520414.310107:kvm_init_vcpu index: 169 id: 212 19050@1595520414.310635:kvm_init_vcpu index: 170 id: 256 qemu-system-x86_64: kvm_init_vcpu: kvm_get_vcpu failed (256): Invalid argument which makes stuff a lot more obvious. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200723160915.129069-1-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05kvm: remove kvm specific functions from global includesClaudio Fontana2-22/+7
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05hax: remove hax specific functions from global includesClaudio Fontana1-10/+0
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05whpx: remove whpx specific functions from global includesClaudio Fontana2-48/+0
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05hvf: remove hvf specific functions from global includesClaudio Fontana2-31/+0
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: add handle_interrupt to the CpusAccel interfaceClaudio Fontana2-26/+28
kvm: uses the generic handler qtest: uses the generic handler whpx: changed to use the generic handler (identical implementation) hax: changed to use the generic handler (identical implementation) hvf: changed to use the generic handler (identical implementation) tcg: adapt tcg-cpus to point to the tcg-specific handler Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out kvm-specific code to accel/kvmClaudio Fontana5-4/+123
register a "CpusAccel" interface for KVM as well. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [added const] Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out qtest-specific code to accel/qtestClaudio Fontana5-1/+123
register a "CpusAccel" interface for qtest as well. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out TCG-specific code to accel/tcgClaudio Fontana4-6/+575
TCG is the first accelerator to register a "CpusAccel" interface on initialization, providing functions for starting a vcpu, kicking a vcpu, sychronizing state and getting virtual clock and ticks. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [added const] Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05icount: rename functions to be consistent with the module nameClaudio Fontana1-3/+3
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpu-timers, icount: new modulesClaudio Fontana4-14/+41
refactoring of cpus.c continues with cpu timer state extraction. cpu-timers: responsible for the softmmu cpu timers state, including cpu clocks and ticks. icount: counts the TCG instructions executed. As such it is specific to the TCG accelerator. Therefore, it is built only under CONFIG_TCG. One complication is due to qtest, which uses an icount field to warp time as part of qtest (qtest_clock_warp). In order to solve this problem, provide a separate counter for qtest. This requires fixing assumptions scattered in the code that qtest_enabled() implies icount_enabled(), checking each specific case. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [remove redundant initialization with qemu_spice_init] Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [fix lingering calls to icount_get] Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03disas: Move host asm annotations to tb_gen_codeRichard Henderson1-9/+15
Instead of creating GStrings and passing them into log_disas, just print the annotations directly in tb_gen_code. Fix the annotations for the slow paths of the TB, after the part implementing the final guest instruction. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-30stubs: Split accelerator / hardware related stubsPhilippe Mathieu-Daudé1-40/+1
Move hardware stubs unrelated from the accelerator to xen-hw-stub.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-5-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/i386/xen: Rename X86/PC specific function as xen_hvm_init_pc()Philippe Mathieu-Daudé1-1/+1
xen_hvm_init() is only meanful to initialize a X86/PC machine, rename it as xen_hvm_init_pc(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30exec: Remove MemoryRegion::global_locking fieldPhilippe Mathieu-Daudé1-2/+2
Last uses of memory_region_clear_global_locking() have been removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked") and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O path to TLB path"). Remove memory_region_clear_global_locking() and the now unused 'global_locking' field in MemoryRegion. Reported-by: Alexander Bulekov <alxndr@bu.edu> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200806150726.962-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi6-63/+65
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-22Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Pull request trivial patches 20200919 # gpg: Signature made Sat 19 Sep 2020 19:43:35 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: contrib/: fix some comment spelling errors qapi/: fix some comment spelling errors disas/: fix some comment spelling errors linux-user/: fix some comment spelling errors util/: fix some comment spelling errors scripts/: fix some comment spelling errors docs/: fix some comment spelling errors migration/: fix some comment spelling errors qemu/: fix some comment spelling errors scripts/git.orderfile: Display meson files along with buildsys ones hw/timer/hpet: Fix debug format strings hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw meson: remove empty else and duplicated gio deps manual: escape backslashes in "parsed-literal" blocks ui/spice-input: Remove superfluous forward declaration hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition hw/gpio/max7310: Remove impossible check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-17qemu/: fix some comment spelling errorszhaolichang1-1/+1
I found that there are many spelling errors in the comments of qemu, so I used the spellcheck tool to check the spelling errors and finally found some spelling errors in the folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: Alex Bennee <alex.bennee@linaro.org> Message-Id: <20200917075029.313-2-zhaolichang@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-16util: rename qemu_open() to qemu_open_old()Daniel P. Berrangé1-1/+1
We want to introduce a new version of qemu_open() that uses an Error object for reporting problems and make this it the preferred interface. Rename the existing method to release the namespace for the new impl. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost1-2/+2
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost1-2/+3
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-08configure: move -ldl test to mesonPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-03cputlb: Make store_helper less fragile to compiler optimizationsRichard Henderson1-59/+79
This has no functional change. The current function structure is: inline QEMU_ALWAYSINLINE store_memop() { switch () { ... default: qemu_build_not_reached(); } } inline QEMU_ALWAYSINLINE store_helper() { ... if (span_two_pages_or_io) { ... helper_ret_stb_mmu(); } store_memop(); } helper_ret_stb_mmu() { store_helper(); } Whereas GCC will generate an error at compile-time when an always_inline function is not inlined, Clang does not. Nor does Clang prioritize the inlining of always_inline functions. Both of these are arguably bugs. Both `store_memop` and `store_helper` need to be inlined and allow constant propogations to eliminate the `qemu_build_not_reached` call. However, if the compiler instead chooses to inline helper_ret_stb_mmu into store_helper, then store_helper is now self-recursive and the compiler is no longer able to propagate the constant in the same way. This does not produce at current QEMU head, but was reproducible at v4.2.0 with `clang-10 -O2 -fexperimental-new-pass-manager`. The inline recursion problem can be fixed solely by marking helper_ret_stb_mmu as noinline, so the compiler does not make an incorrect decision about which functions to inline. In addition, extract store_helper_unaligned as a noinline subroutine that can be shared by all of the helpers. This saves about 6k code size in an optimized x86_64 build. Reported-by: Shu-Chun Weng <scw@google.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-08-21meson: accelMarc-André Lureau10-24/+34
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: rename included C source files to .c.incPaolo Bonzini3-2/+2
With Makefiles that have automatically generated dependencies, you generated includes are set as dependencies of the Makefile, so that they are built before everything else and they are available when first building the .c files. Alternatively you can use a fine-grained dependency, e.g. target/arm/translate.o: target/arm/decode-neon-shared.inc.c With Meson you have only one choice and it is a third option, namely "build at the beginning of the corresponding target"; the way you express it is to list the includes in the sources of that target. The problem is that Meson decides if something is a source vs. a generated include by looking at the extension: '.c', '.cc', '.m', '.C' are sources, while everything else is considered an include---including '.inc.c'. Use '.c.inc' to avoid this, as it is consistent with our other convention of using '.rst.inc' for included reStructuredText files. The editorconfig file is adjusted. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini4-2/+4
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-04accel/xen: Fix xen_enabled() behavior on target-agnostic objectsPhilippe Mathieu-Daudé2-6/+3
CONFIG_XEN is generated by configure and stored in "config-target.h", which is (obviously) only include for target-specific objects. This is a problem for target-agnostic objects as CONFIG_XEN is never defined and xen_enabled() is always inlined as 'false'. Fix by following the KVM schema, defining CONFIG_XEN_IS_POSSIBLE when we don't know to force the call of the non-inlined function, returning the xen_allowed boolean. Fixes: da278d58a092 ("accel: Move Xen accelerator code under accel/xen/") Reported-by: Paul Durrant <pdurrant@amazon.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200804074930.13104-2-philmd@redhat.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2020-07-27accel/tcg: better handle memory constrained systemsAlex Bennée1-1/+6
It turns out there are some 64 bit systems that have relatively low amounts of physical memory available to them (typically CI system). Even with swapping available a 1GB translation buffer that fills up can put the machine under increased memory pressure. Detect these low memory situations and reduce tb_size appropriately. Fixes: 600e17b2615 ("accel/tcg: increase default code gen buffer size for 64 bit") Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Robert Foley <robert.foley@linaro.org> Cc: BALATON Zoltan <balaton@eik.bme.hu> Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com> Message-Id: <20200724064509.331-7-alex.bennee@linaro.org>
2020-07-24tcg: update comments for save_iotlb_data in cputlbAlex Bennée1-6/+5
I missed Emilio's review comments: Message-ID: <20200718205107.GA994221@sff> and the patch got merged. Correcting the comments now. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200720122358.26881-1-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-07-17tcg/cpu-exec: precise single-stepping after an interruptRichard Henderson1-1/+7
When single-stepping with a debugger attached to QEMU, and when an interrupt is raised, the debugger misses the first instruction after the interrupt. Tested-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Buglink: https://bugs.launchpad.net/qemu/+bug/757702 Message-Id: <20200717163029.2737546-1-richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-07-16tcg/cpu-exec: precise single-stepping after an exceptionLuc Michel1-0/+11
When single-stepping with a debugger attached to QEMU, and when an exception is raised, the debugger misses the first instruction after the exception: $ qemu-system-aarch64 -M virt -display none -cpu cortex-a53 -s -S $ aarch64-linux-gnu-gdb GNU gdb (GDB) 9.2 [...] (gdb) tar rem :1234 Remote debugging using :1234 warning: No executable has been specified and target does not support determining executable automatically. Try using the "file" command. 0x0000000000000000 in ?? () (gdb) # writing nop insns to 0x200 and 0x204 (gdb) set *0x200 = 0xd503201f (gdb) set *0x204 = 0xd503201f (gdb) # 0x0 address contains 0 which is an invalid opcode. (gdb) # The CPU should raise an exception and jump to 0x200 (gdb) si 0x0000000000000204 in ?? () With this commit, the same run steps correctly on the first instruction of the exception vector: (gdb) si 0x0000000000000200 in ?? () Buglink: https://bugs.launchpad.net/qemu/+bug/757702 Signed-off-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200716193947.3058389-1-luc.michel@greensocs.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-07-15cputlb: ensure we save the IOTLB data in case of resetAlex Bennée1-3/+35
Any write to a device might cause a re-arrangement of memory triggering a TLB flush and potential re-size of the TLB invalidating previous entries. This would cause users of qemu_plugin_get_hwaddr() to see the warning: invalid use of qemu_plugin_get_hwaddr because of the failed tlb_lookup which should always succeed. To prevent this we save the IOTLB data in case it is later needed by a plugin doing a lookup. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200713200415.26214-7-alex.bennee@linaro.org>
2020-07-10accel/tcg: Add stub for probe_access()Philippe Mathieu-Daudé1-0/+7
The TCG helpers were added in b92e5a22ec3 in softmmu_template.h. probe_write() was added in there in 3b4afc9e75a to be moved out to accel/tcg/cputlb.c in 3b08f0a9254, and was later refactored as probe_access() in c25c283df0f. Since it is a TCG specific helper, add a stub to avoid failures when building without TCG, such: target/arm/helper.o: In function `probe_read': include/exec/exec-all.h:362: undefined reference to `probe_access' Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10accel/Kconfig: Add the TCG selectorPhilippe Mathieu-Daudé1-0/+3
Expose the CONFIG_TCG selector to let minikconf.py uses it. When building with --disable-tcg build, this helps to deselect devices that are TCG-dependent. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10accel/Kconfig: Extract accel selectors into their own configPhilippe Mathieu-Daudé1-0/+6
Move the accel selectors from the global Kconfig.host to their own Kconfig file. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2-6/+2
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, manual partMarkus Armbruster1-27/+23
The previous commit used Coccinelle to convert from checking the Error object to checking the return value. Convert a few more manually. Also tweak control flow in places to conform to the conventional "if error bail out" pattern. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-20-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster2-4/+2
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-02accel/kvm: Convert to ram_block_discard_disable()David Hildenbrand1-2/+2
Discarding memory does not work as expected. At the time this is called, we cannot have anyone active that relies on discards to work properly. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-5-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-26osdep: Make MIN/MAX evaluate arguments only onceEric Blake1-3/+3
I'm not aware of any immediate bugs in qemu where a second runtime evaluation of the arguments to MIN() or MAX() causes a problem, but proactively preventing such abuse is easier than falling prey to an unintended case down the road. At any rate, here's the conversation that sparked the current patch: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html Update the MIN/MAX macros to only evaluate their argument once at runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are promoting the temporaries to the same type as the final comparison (we have to trigger type promotion, as typeof(bitfield) won't compile; and we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our uses of MAX are on void* pointers where such addition is undefined). However, we are unable to work around gcc refusing to compile ({}) in a constant context (such as the array length of a static variable), even when only used in the dead branch of a __builtin_choose_expr(), so we have to provide a second macro pair MIN_CONST and MAX_CONST for use when both arguments are known to be compile-time constants and where the result must also be usable as a constant; this second form evaluates arguments multiple times but that doesn't matter for constants. By using a void expression as the expansion if a non-constant is presented to this second form, we can enlist the compiler to ensure the double evaluation is not attempted on non-constants. Alas, as both macros now rely on compiler intrinsics, they are no longer usable in preprocessor #if conditions; those will just have to be open-coded or the logic rewritten into #define or runtime 'if' conditions (but where the compiler dead-code-elimination will probably still apply). I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all forms of macro mis-use. As the errors can sometimes be cryptic, I'm demonstrating the gcc output: Use of MIN when MIN_CONST is needed: In file included from /home/eblake/qemu/qemu-img.c:25: /home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function 249 | ({ \ | ^ /home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’ 92 | char array[MIN(1, 2)] = ""; | ^~~ Use of MIN_CONST when MIN is needed: /home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’: /home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be 1225 | i = MIN_CONST(i, n); | ^ Use of MIN in the preprocessor: In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20: /home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’: /home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions 249 | ({ \ | ^ Fix the resulting callsites that used #if or computed a compile-time constant min or max to use the new macros. cpu-defs.h is interesting, as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes dynamic. It may be worth improving glib's MIN/MAX definitions to be saner, but that is a task for another day. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200625162602.700741-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26kvm: support to get/set dirty log initial-all-set capabilityJay Zhou1-7/+14
Since the new capability KVM_DIRTY_LOG_INITIALLY_SET of KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 has been introduced in the kernel, tweak the userspace side to detect and enable this capability. Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200304025554.2159-1-jianjay.zhou@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-16translate-all: call qemu_spin_destroy for PageDescEmilio G. Cota1-0/+9
The radix tree is append-only, but we can fail to insert a PageDesc if the insertion races with another thread. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200609200738.445-8-robert.foley@linaro.org> Message-Id: <20200612190237.30436-11-alex.bennee@linaro.org>
2020-06-16tcg: call qemu_spin_destroy for tb->jmp_lockEmilio G. Cota1-0/+8
Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Robert Foley <robert.foley@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> [RF: minor changes + remove tb_destroy_func] Message-Id: <20200609200738.445-7-robert.foley@linaro.org> Message-Id: <20200612190237.30436-10-alex.bennee@linaro.org>
2020-06-16cputlb: destroy CPUTLB with tlb_destroyEmilio G. Cota1-0/+15
I was after adding qemu_spin_destroy calls, but while at it I noticed that we are leaking some memory. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200609200738.445-5-robert.foley@linaro.org> Message-Id: <20200612190237.30436-8-alex.bennee@linaro.org>
2020-06-12stubs: move Xen stubs to accel/Paolo Bonzini2-0/+54
Keep them close to the other accelerator-dependent stubs, so as to remove stubs that are not needed by tools. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-12xen: fix build without pci passthroughAnthony PERARD1-2/+2
Xen PCI passthrough support may not be available and thus the global variable "has_igd_gfx_passthru" might be compiled out. Common code should not access it in that case. Unfortunately, we can't use CONFIG_XEN_PCI_PASSTHROUGH directly in xen-common.c so this patch instead move access to the has_igd_gfx_passthru variable via function and those functions are also implemented as stubs. The stubs will be used when QEMU is built without passthrough support. Now, when one will want to enable igd-passthru via the -machine property, they will get an error message if QEMU is built without passthrough support. Fixes: 46472d82322d0 ('xen: convert "-machine igd-passthru" to an accelerator property') Reported-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200603160442.3151170-1-anthony.perard@citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-04 18:26:19 +0000