aboutsummaryrefslogtreecommitdiff
path: root/accel/tcg
AgeCommit message (Collapse)AuthorFilesLines
2018-04-06tcg: Fix out-of-line generic vector comparesRichard Henderson1-1/+1
A mistake in the type passed to sizeof, that happens to work when the out-of-line fallback itself is using host vectors, but fails when using only the base types. Tested-by: Emilio G. Cota <cota@braap.org> Reported-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-26tcg: Really fix cpu_io_recompileRichard Henderson1-27/+10
We have confused the number of instructions that have been executed in the TB with the number of instructions needed to repeat the I/O instruction. We have used cpu_restore_state_from_tb, which means that the guest pc is pointing to the I/O instruction. The only time the answer to the later question is not 1 is when MIPS or SH4 need to re-execute the branch for the delay slot as well. We must rely on cpu->cflags_next_tb to generate the next TB, as otherwise we have a race condition with other guest cpus within the TB cache. Fixes: 0790f86861079b1932679d0f011e431aaf4ee9e2 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180319031545.29359-1-richard.henderson@linaro.org> Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12tcg: fix cpu_io_recompilePavel Dovgalyuk1-3/+15
cpu_io_recompile() function was broken by the commit 9b990ee5a3cc6aa38f81266fb0c6ef37a36c45b9. Instead of regenerating the block starting from PC of the original block, it just set the instruction counter for TCG. In most cases this was unnoticed, but in icount mode there was an exception for incorrect usage of CF_LAST_IO flag. This patch recovers recompilation of the original block and also configures translation for executing single IO instruction which caused a recompilation. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095338.1060.27385.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12cpu-exec: fix exception_index handlingPavel Dovgalyuk1-1/+4
Function cpu_handle_interrupt calls cc->cpu_exec_interrupt to process pending hardware interrupts. Under the hood cpu_exec_interrupt uses cpu->exception_index to pass information to the internal function which is usually common for exception and interrupt processing. But this value is not reset after return and may be processed again by cpu_handle_exception. This does not happen due to overwriting the exception_index at the end of cpu_handle_interrupt. But this branch may also overwrite the valid exception_index in some cases. Therefore this patch: 1. resets exception_index just after the call to cpu_exec_interrupt 2. prevents overwriting the meaningful value of exception_index Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180227095140.1060.61357.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-02-08tcg: Add generic vector helpers with a scalar operandRichard Henderson2-0/+199
Use dup to convert a non-constant scalar to a third vector. Add addition, multiplication, and logical operations with an immediate. Add addition, subtraction, multiplication, and logical operations with a non-constant scalar. Allow for the front-end to build operations in which the scalar operand comes first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic helpers for saturating arithmeticRichard Henderson2-0/+288
No vector ops as yet. SSE only has direct support for 8- and 16-bit saturation; handling 32- and 64-bit saturation is much more expensive. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for multiplicationRichard Henderson2-0/+49
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for comparisonsRichard Henderson2-0/+66
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for constant shiftsRichard Henderson2-0/+159
Opcodes are added for scalar and vector shifts, but considering the varied semantics of these do not expose them to the front ends. Do go ahead and provide them in case they are needed for backend expansion. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector expandersRichard Henderson3-1/+355
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-05Drop remaining bits of ia64 host supportPeter Maydell1-33/+0
We dropped support for ia64 host CPUs in the 2.11 release (removing the TCG backend for it, and advertising the support as being completely removed in the changelog). However there are a few bits and pieces of code still floating about. Remove those, too. We can drop the check in configure for "ia64 or hppa host?" entirely, because we don't support hppa hosts either any more. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-25accel/tcg: add size paremeter in tlb_fill()Laurent Vivier3-12/+17
The MC68040 MMU provides the size of the access that triggers the page fault. This size is set in the Special Status Word which is written in the stack frame of the access fault exception. So we need the size in m68k_cpu_unassigned_access() and m68k_cpu_handle_mmu_fault(). To be able to do that, this patch modifies the prototype of handle_mmu_fault handler, tlb_fill() and probe_write(). do_unassigned_access() already includes a size parameter. This patch also updates handle_mmu_fault handlers and tlb_fill() of all targets (only parameter, no code change). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2018-01-23page_unprotect(): handle calls to pages that are PAGE_WRITEPeter Maydell2-20/+43
If multiple guest threads in user-mode emulation write to a page which QEMU has marked read-only because of cached TCG translations, the threads can race in page_unprotect: * threads A & B both try to do a write to a page with code in it at the same time (ie which we've made non-writeable, so SEGV) * they race into the signal handler with this faulting address * thread A happens to get to page_unprotect() first and takes the mmap lock, so thread B sits waiting for it to be done * A then finds the page, marks it PAGE_WRITE and mprotect()s it writable * A can then continue OK (returns from signal handler to retry the memory access) * ...but when B gets the mmap lock it finds that the page is already PAGE_WRITE, and so it exits page_unprotect() via the "not due to protected translation" code path, and wrongly delivers the signal to the guest rather than just retrying the access In particular, this meant that trying to run 'javac' in user-mode emulation would fail with a spurious guest SIGSEGV. Handle this by making page_unprotect() assume that a call for a page which is already PAGE_WRITE is due to a race of this sort and return a "fault handled" indication. Since this would cause an infinite loop if we ever called page_unprotect() for some other kind of fault than "write failed due to bad access permissions", tighten the condition in handle_cpu_signal() to check the signal number and si_code, and add a comment so that if somebody does ever find themselves debugging an infinite loop of faults they have some clue about why. (The trick for identifying the correct setting for current_tb_invalidated for thread B (needed to handle the precise-SMC case) is due to Richard Henderson. Paolo Bonzini suggested just relying on si_code rather than trying anything more complicated.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1511879725-9576-3-git-send-email-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-01-23linux-user: Propagate siginfo_t through to handle_cpu_signal()Peter Maydell1-25/+14
Currently all the architecture/OS specific cpu_signal_handler() functions call handle_cpu_signal() without passing it the siginfo_t. We're going to want that so we can look at the si_code to determine whether this is a SEGV_ACCERR access violation or some other kind of fault, so change the functions to pass through the pointer to the siginfo_t rather than just the si_addr value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1511879725-9576-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-12-29tcg: add cs_base and flags to -d exec outputPaolo Bonzini2-4/+7
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20171217055023.29225-1-pbonzini@redhat.com> [rth: Also change the Chain logging in helper_lookup_tb_ptr.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-21cpu-exec: fix missed CPU kick during interrupt injectionDavid Hildenbrand1-9/+3
The conditional memory barrier not only looks strange but actually is wrong. On s390x, I can reproduce interrupts via cpu_interrupt() not leading to a proper kick out of emulation every now and then. cpu_interrupt() is especially used for inter CPU communication via SIGP (esp. external calls and emergency interrupts). With this patch, I was not able to reproduce. (esp. no stalls or hangs in the guest). My setup is s390x MTTCG with 16 VCPUs on 8 CPU host, running make -j16. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171129191319.11483-1-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-18misc: remove duplicated includesPhilippe Mathieu-Daudé1-1/+0
exec: housekeeping (funny since 02d0e095031) applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18accel/tcg/cpu-exec-common.c: Remove unnecessary include of memory-internal.hPeter Maydell1-1/+0
The cpu-exec-common.c file includes memory-internal.h, but it doesn't actually use anything from that header. Remove the unnecessary include. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18translate-all: fix 'consisits' typo in commentEmilio G. Cota1-1/+1
Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-11-21accel/tcg: Handle atomic accesses to notdirty memory correctlyPeter Maydell3-13/+38
To do a write to memory that is marked as notdirty, we need to invalidate any TBs we have cached for that memory, and update the cpu physical memory dirty flags for VGA and migration. The slowpath code in notdirty_mem_write() does all this correctly, but the new atomic handling code in atomic_mmu_lookup() doesn't do anything at all, it just clears the dirty bit in the TLB. The effect of this bug is that if the first write to a notdirty page for which we have cached TBs is by a guest atomic access, we fail to invalidate the TBs and subsequently will execute incorrect code. This can be seen by trying to run 'javac' on AArch64. Use the new notdirty_call_before() and notdirty_call_after() functions to correctly handle the update to notdirty memory in the atomic codepath. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1511201308-23580-3-git-send-email-peter.maydell@linaro.org
2017-11-20Revert "cpu-exec: don't overwrite exception_index"Peter Maydell1-3/+1
This reverts commit e01cecabf3e04d22340d7e8b3616ef051c42c891, which breaks booting of aarch64 Linux images. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-42/+57
Miscellaneous bugfixes # gpg: Signature made Wed 15 Nov 2017 15:27:25 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: fix scripts/update-linux-headers.sh here document exec: Do not resolve subpage in mru_section util/stats64: Fix min/max comparisons cpu-exec: avoid cpu_exec_nocache infinite loop with record/replay cpu-exec: don't overwrite exception_index vhost-user-scsi: add missing virtqueue_size param target-i386: adds PV_TLB_FLUSH CPUID feature bit thread-posix: fix qemu_rec_mutex_trylock macro Makefile: simpler/faster "make help" ioapic/tracing: Remove last DPRINTFs Enable 8-byte wide MMIO for 16550 serial devices Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-15tcg: Record code_gen_buffer address for user-only memory helpersRichard Henderson3-18/+73
When we handle a signal from a fault within a user-only memory helper, we cannot cpu_restore_state with the PC found within the signal frame. Use a TLS variable, helper_retaddr, to record the unwind start point to find the faulting guest insn. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-14cpu-exec: avoid cpu_exec_nocache infinite loop with record/replayPavel Dovgalyuk1-41/+54
This patch ensures that icount_decr.u32.high is clear before calling cpu_exec_nocache when exception is pending. Because the exception is caused by the first instruction in the block and it cannot be executed without resetting the flag. There are two parts in the fix. First, clear icount_decr.u32.high in cpu_handle_interrupt (just before processing the "dependent" request, stored in cpu->interrupt_request or cpu->exit_request) rather than cpu_loop_exec_tb; this ensures that cpu_handle_exception is always reached with zero icount_decr.u32.high unless another interrupt has happened in the meanwhile. Second, try to cause the exception at the beginning of cpu_handle_exception, and exit immediately if the TB cannot execute. With this change, interrupts are processed and cpu_exec_nocache can make process. Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20171114081818.27640.33165.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-11-14cpu-exec: don't overwrite exception_indexPavel Dovgalyuk1-1/+3
This patch adds a condition before overwriting exception_index fiels. It is needed when exception_index is already set to some meaningful value. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20171114081812.27640.26372.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-11-13accel/tcg/translate-all: expand cpu_restore_state addr checkAlex Bennée1-23/+29
We are still seeing signals during translation time when we walk over a page protection boundary. This expands the check to ensure the host PC is inside the code generation buffer. The original suggestion was to check versus tcg_ctx.code_gen_ptr but as we now segment the translation buffer we have to settle for just a general check for being inside. I've also fixed up the declaration to make it clear it can deal with invalid addresses. A later patch will fix up the call sites. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20171108153245.20740-2-alex.bennee@linaro.org Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-03cpu-exec: Exit exclusive region on longjmp from step_atomicPeter Maydell1-3/+12
Commit ac03ee5331612e44be narrowed the scope of the exclusive region so it only covers when we're executing the TB, not when we're generating it. However it missed that there is more than one execution path out of cpu_tb_exec -- if the atomic insn causes an exception then the code will longjmp out, skipping the code to end the exclusive region. This causes QEMU to hang the next time the CPU calls start_exclusive(), waiting for itself to exit the region. Move the "end the region" code out to the end of the function so that it is run for both normal exit and also for exit-via-longjmp. We have to use a volatile bool flag to decide whether we need to end the region, because we can longjump out of the codegen as well as the execution. (For some reason this only reproduces for me with a clang optimized build, not a gcc debug build.) Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Fixes: ac03ee5331612e44beb393df2b578c951d27dc0d Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1509640536-32160-1-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24translate-all: exit from tb_phys_invalidate if qht_remove failsEmilio G. Cota1-1/+3
Two or more threads might race while invalidating the same TB. We currently do not check for this at all despite taking tb_lock, which means we would wrongly invalidate the same TB more than once. This bug has actually been hit by users: I recently saw a report on IRC, although I have yet to see the corresponding test case. Fix this by using qht_remove as the synchronization point; if it fails, that means the TB has already been invalidated, and therefore there is nothing left to do in tb_phys_invalidate. Note that this solution works now that we still have tb_lock, and will continue working once we remove tb_lock. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1508445114-4717-1-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: enable multiple TCG contexts in softmmuEmilio G. Cota1-1/+1
This enables parallel TCG code generation. However, we do not take advantage of it yet since tb_lock is still held during tb_gen_code. In user-mode we use a single TCG context; see the documentation added to tcg_region_init for the rationale. Note that targets do not need any conversion: targets initialize a TCGContext (e.g. defining TCG globals), and after this initialization has finished, the context is cloned by the vCPU threads, each of them keeping a separate copy. TCG threads claim one entry in tcg_ctxs[] by atomically increasing n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's of that variable and tcg_ctxs; they are there just to play nice with analysis tools such as thread sanitizer. Note that we do not allocate an array of contexts (we allocate an array of pointers instead) because when tcg_context_init is called, we do not know yet how many contexts we'll use since the bool behind qemu_tcg_mttcg_enabled() isn't set yet. Previous patches folded some TCG globals into TCGContext. The non-const globals remaining are only set at init time, i.e. before the TCG threads are spawned. Here is a list of these set-at-init-time globals under tcg/: Only written by tcg_context_init: - indirect_reg_alloc_order - tcg_op_defs Only written by tcg_target_init (called from tcg_context_init): - tcg_target_available_regs - tcg_target_call_clobber_regs - arm: arm_arch, use_idiv_instructions - i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt, have_movbe, have_popcnt - mips: use_movnz_instructions, use_mips32_instructions, use_mips32r2_instructions, got_sigill (tcg_target_detect_isa) - ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr - s390: tb_ret_addr, s390_facilities - sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines), use_vis3_instructions Only written by tcg_prologue_init: - 'struct jit_code_entry one_entry' - aarch64: tb_ret_addr - arm: tb_ret_addr - i386: tb_ret_addr, guest_base_flags - ia64: tb_ret_addr - mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: introduce regions to split code_gen_bufferEmilio G. Cota1-43/+20
This is groundwork for supporting multiple TCG contexts. The naive solution here is to split code_gen_buffer statically among the TCG threads; this however results in poor utilization if translation needs are different across TCG threads. What we do here is to add an extra layer of indirection, assigning regions that act just like pages do in virtual memory allocation. (BTW if you are wondering about the chosen naming, I did not want to use blocks or pages because those are already heavily used in QEMU). We use a global lock to serialize allocations as well as statistics reporting (we now export the size of the used code_gen_buffer with tcg_code_size()). Note that for the allocator we could just use a counter and atomic_inc; however, that would complicate the gathering of tcg_code_size()-like stats. So given that the region operations are not a fast path, a lock seems the most reasonable choice. The effectiveness of this approach is clear after seeing some numbers. I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark. Note that I'm evaluating this after enabling per-thread TCG (which is done by a subsequent commit). * -smp 1, 1 region (entire buffer): qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357 qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363 qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364 qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373 qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373 qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360 qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370 qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367 That is, 8 flushes. * -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]: qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356 qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361 qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361 qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375 qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375 qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360 qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365 qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368 Again, 8 flushes. Note how buffer utilization is not 100%, but it is close. Smaller region sizes would yield higher utilization, but we want region allocation to be rare (it acquires a lock), so we do not want to go too small. * -smp 8, static partitioning of 8 regions (10 MB per region): qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354 qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370 qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365 qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377 qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358 qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367 qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364 qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358 qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362 qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372 qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374 qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376 qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374 qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372 qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359 qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362 qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368 qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378 qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367 qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364 That is, 20 flushes. Note how a static partitioning approach uses the code buffer poorly, leading to many unnecessary flushes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24translate-all: use qemu_protect_rwx/none helpersEmilio G. Cota1-48/+13
The helpers require the address and size to be page-aligned, so do that before calling them. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: distribute profiling counters across TCGContext'sEmilio G. Cota1-10/+13
This is groundwork for supporting multiple TCG contexts. To avoid scalability issues when profiling info is enabled, this patch makes the profiling info counters distributed via the following changes: 1) Consolidate profile info into its own struct, TCGProfile, which TCGContext also includes. Note that tcg_table_op_count is brought into TCGProfile after dropping the tcg_ prefix. 2) Iterate over the TCG contexts in the system to obtain the total counts. This change also requires updating the accessors to TCGProfile fields to use atomic_read/set whenever there may be conflicting accesses (as defined in C11) to them. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: define tcg_init_ctx and make tcg_ctx a pointerEmilio G. Cota2-55/+56
Groundwork for supporting multiple TCG contexts. The core of this patch is this change to tcg/tcg.h: > -extern TCGContext tcg_ctx; > +extern TCGContext tcg_init_ctx; > +extern TCGContext *tcg_ctx; Note that for now we set *tcg_ctx to whatever TCGContext is passed to tcg_context_init -- in this case &tcg_init_ctx. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: take tb_ctx out of TCGContextEmilio G. Cota2-30/+29
Groundwork for supporting multiple TCG contexts. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24translate-all: report correct avg host TB sizeEmilio G. Cota1-9/+23
Since commit 6e3b2bfd6 ("tcg: allocate TB structs before the corresponding translated code") we are not fully utilizing code_gen_buffer for translated code, and therefore are incorrectly reporting the amount of translated code as well as the average host TB size. Address this by: - Making the conscious choice of misreporting the total translated code; doing otherwise would mislead users into thinking "-tb-size" is not honoured. - Expanding tb_tree_stats to accurately count the bytes of translated code on the host, and using this for reporting the average tb host size, as well as the expansion ratio. In the future we might want to consider reporting the accurate numbers for the total translated code, together with a "bookkeeping/overhead" field to account for the TB structs. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24exec-all: rename tb_free to tb_removeEmilio G. Cota2-4/+4
We don't really free anything in this function anymore; we just remove the TB from the binary search tree. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24translate-all: use a binary search tree to track TBs in TBContextEmilio G. Cota1-108/+113
This is a prerequisite for supporting multiple TCG contexts, since we will have threads generating code in separate regions of code_gen_buffer. For this we need a new field (.size) in struct tb_tc to keep track of the size of the translated code. This field uses a size_t to avoid adding a hole to the struct, although really an unsigned int would have been enough. The comparison function we use is optimized for the common case: insertions. Profiling shows that upon booting debian-arm, 98% of comparisons are between existing tb's (i.e. a->size and b->size are both !0), which happens during insertions (and removals, but those are rare). The remaining cases are lookups. From reading the glib sources we see that the first key is always the lookup key. However, the code does not assume this to always be the case because this behaviour is not guaranteed in the glib docs. However, we embed this knowledge in the code as a branch hint for the compiler. Note that tb_free does not free space in the code_gen_buffer anymore, since we cannot easily know whether the tb is the last one inserted in code_gen_buffer. The next patch in this series renames tb_free to tb_remove to reflect this. Performance-wise, lookups in tb_find_pc are the same as before: O(log n). However, insertions are O(log n) instead of O(1), which results in a small slowdown when booting debian-arm: Performance counter stats for 'build/arm-softmmu/qemu-system-arm \ -machine type=virt -nographic -smp 1 -m 4096 \ -netdev user,id=unet,hostfwd=tcp::2222-:22 \ -device virtio-net-device,netdev=unet \ -drive file=img/arm/jessie-arm32.qcow2,id=myblock,index=0,if=none \ -device virtio-blk-device,drive=myblock \ -kernel img/arm/aarch32-current-linux-kernel-only.img \ -append console=ttyAMA0 root=/dev/vda1 \ -name arm,debug-threads=on -smp 1' (10 runs): - Before: 8048.598422 task-clock (msec) # 0.931 CPUs utilized ( +- 0.28% ) 16,974 context-switches # 0.002 M/sec ( +- 0.12% ) 0 cpu-migrations # 0.000 K/sec 10,125 page-faults # 0.001 M/sec ( +- 1.23% ) 35,144,901,879 cycles # 4.367 GHz ( +- 0.14% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 65,758,252,643 instructions # 1.87 insns per cycle ( +- 0.33% ) 10,871,298,668 branches # 1350.707 M/sec ( +- 0.41% ) 192,322,212 branch-misses # 1.77% of all branches ( +- 0.32% ) 8.640869419 seconds time elapsed ( +- 0.57% ) - After: 8146.242027 task-clock (msec) # 0.923 CPUs utilized ( +- 1.23% ) 17,016 context-switches # 0.002 M/sec ( +- 0.40% ) 0 cpu-migrations # 0.000 K/sec 18,769 page-faults # 0.002 M/sec ( +- 0.45% ) 35,660,956,120 cycles # 4.378 GHz ( +- 1.22% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 65,095,366,607 instructions # 1.83 insns per cycle ( +- 1.73% ) 10,803,480,261 branches # 1326.192 M/sec ( +- 1.95% ) 195,601,289 branch-misses # 1.81% of all branches ( +- 0.39% ) 8.828660235 seconds time elapsed ( +- 0.38% ) Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Remove CF_IGNORE_ICOUNTRichard Henderson2-10/+9
Now that we have curr_cflags, we can include CF_USE_ICOUNT early and then remove it as necessary. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24cpu-exec: lookup/generate TB outside exclusive region during step_atomicEmilio G. Cota1-16/+14
Now that all code generation has been converted to check CF_PARALLEL, we can generate !CF_PARALLEL code without having yet set !parallel_cpus -- and therefore without having to be in the exclusive region during cpu_exec_step_atomic. While at it, merge cpu_exec_step into cpu_exec_step_atomic. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: check CF_PARALLEL instead of parallel_cpusEmilio G. Cota1-0/+1
Thereby decoupling the resulting translated code from the current state of the system. The tb->cflags field is not passed to tcg generation functions. So we add a field to TCGContext, storing there a copy of tb->cflags. Most architectures have <= 32 registers, which results in a 4-byte hole in TCGContext. Use this hole for the new field. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: convert tb->cflags reads to tb_cflags(tb)Emilio G. Cota1-2/+2
Convert all existing readers of tb->cflags to tb_cflags, so that we use atomic_read and therefore avoid undefined behaviour in C11. Note that the remaining setters/getters of the field are protected by tb_lock, and therefore do not need conversion. Luckily all readers access the field via 'tb->cflags' (so no foo.cflags, bar->cflags in the code base), which makes the conversion easily scriptable: FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \ accel/tcg/translator.c | cut -f1 -d':' | sort | uniq) perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES Then manually fixed the few errors that checkpatch reported. Compile-tested for all targets. Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Add CPUState cflags_next_tbRichard Henderson2-30/+27
We were generating code during tb_invalidate_phys_page_range, check_watchpoint, cpu_io_recompile, and (seemingly) discarding the TB, assuming that it would magically be picked up during the next iteration through the cpu_exec loop. Instead, record the desired cflags in CPUState so that we request the proper TB so that there is no more magic. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: define CF_PARALLEL and use it for TB hashing along with CF_COUNT_MASKEmilio G. Cota3-27/+33
This will enable us to decouple code translation from the value of parallel_cpus at any given time. It will also help us minimize TB flushes when generating code via EXCP_ATOMIC. Note that the declaration of parallel_cpus is brought to exec-all.h to be able to define there the "curr_cflags" inline. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-20accel/tcg: allow to invalidate a write TLB entry immediatelyDavid Hildenbrand2-3/+6
Background: s390x implements Low-Address Protection (LAP). If LAP is enabled, writing to effective addresses (before any translation) 0-511 and 4096-4607 triggers a protection exception. So we have subpage protection on the first two pages of every address space (where the lowcore - the CPU private data resides). By immediately invalidating the write entry but allowing the caller to continue, we force every write access onto these first two pages into the slow path. we will get a tlb fault with the specific accessed addresses and can then evaluate if protection applies or not. We have to make sure to ignore the invalid bit if tlb_fill() succeeds. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171016202358.3633-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-16tcg: Fix off-by-one in assert in page_set_flagsRichard Henderson1-1/+1
Most of the users of page_set_flags offset (page, page + len) as the end points. One might consider this an error, since the other users do supply an endpoint as the last byte of the region. However, the first thing that page_set_flags does is round end UP to the start of the next page. Which means computing page + len - 1 is in the end pointless. Therefore, accept this usage and do not assert when given the exact size of the vm as the endpoint. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170708025030.15845-2-rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2017-10-10exec-all: extract tb->tc_* into a separate struct tc_tbEmilio G. Cota3-21/+21
In preparation for adding tc.size to be able to keep track of TB's using the binary search tree implementation from glib. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10translate-all: define and use DEBUG_TB_CHECK_GATEEmilio G. Cota1-6/+22
This prevents bit rot by ensuring the debug code is compiled when building a user-mode target. Unfortunately the helpers are user-mode-only so we cannot fully get rid of the ifdef checks. Add a comment to explain this. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10translate-all: define and use DEBUG_TB_INVALIDATE_GATEEmilio G. Cota1-3/+9
This gets rid of an ifdef check while ensuring that the debug code is compiled, which prevents bit rot. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10exec-all: introduce TB_PAGE_ADDR_FMTEmilio G. Cota1-2/+1
And fix the following warning when DEBUG_TB_INVALIDATE is enabled in translate-all.c: CC mipsn32-linux-user/accel/tcg/translate-all.o /data/src/qemu/accel/tcg/translate-all.c: In function ‘tb_alloc_page’: /data/src/qemu/accel/tcg/translate-all.c:1201:16: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘tb_page_addr_t {aka unsigned int}’ [-Werror=format=] printf("protecting code page: 0x" TARGET_FMT_lx "\n", ^ cc1: all warnings being treated as errors /data/src/qemu/rules.mak:66: recipe for target 'accel/tcg/translate-all.o' failed make[1]: *** [accel/tcg/translate-all.o] Error 1 Makefile:328: recipe for target 'subdir-mipsn32-linux-user' failed make: *** [subdir-mipsn32-linux-user] Error 2 cota@flamenco:/data/src/qemu/build ((18f3fe1...) *$)$ Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10translate-all: define and use DEBUG_TB_FLUSH_GATEEmilio G. Cota1-7/+13
This gets rid of some ifdef checks while ensuring that the debug code is compiled, which prevents bit rot. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2024-12-29 03:14:03 +0000