aboutsummaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2012-10-31Merge remote-tracking branch 'origin/master' into threadpoolPaolo Bonzini1-0/+11
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30build: do not include main loop where it is not actually usedPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30build: move cutils.o and qemu-timer-common.o to oslib-obj-yPaolo Bonzini1-2/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30janitor: move iovector functions out of cutils.cPaolo Bonzini1-1/+1
This removes the dependency of cutils.c on iov.c, and lets us remove iov.o from several builds. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-27Makefile: Forbid out-of-tree build from a source tree that has been built inPeter Maydell1-0/+11
If we try to do an out-of-tree build but the source tree we're building from has been used in the past for an in-tree build then things will go confusingly wrong. Specifically, some parts of the build process will pull in generated files from the old in-tree build (because SRC_PATH is on the vpath). Diagnose this situation so we can produce a useful error message and tell the user how to fix it (run distclean in the source tree). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-23qemu-sockets: add socket_listen, socket_connect, socket_parsePaolo Bonzini1-1/+1
These are QAPI-friendly versions of the qemu-sockets functions. They support IP sockets, Unix sockets, and named file descriptors, using a QAPI union to dispatch to the correct function. Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23build: add QAPI files to the toolsPaolo Bonzini1-2/+1
We need them because qemu-sockets will soon be using SocketAddress. Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-19allow make {dist, }clean work w/out configureMike Frysinger1-0/+4
There's no reason to require configure to run before running a clean target, so check MAKECMDGOALS before. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-05Remove libhwStefan Weil1-1/+1
The entries for libhw* are no longer needed in .gitignore. There is also no longer a difference between common-obj-y and hw-obj-y, so one of those two macros is sufficient. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04Make target_phys_addr_t 64 bits unconditionallyAvi Kivity1-1/+1
The hassle and compile time overhead of maintaining both 32-bit and 64-bit capable source isn't worth the tiny performance advantage which is seen on a minority of configurations. Switch to compiling libhw only once, with target_phys_addr_t unconditionally typedefed to uint64_t. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-25configure: Allow builds without any system or user emulationStefan Weil1-0/+5
The old code aborted configure when no emulation target was selected. Even after removing the 'exit 1', it tried to read from STDIN when QEMU was configured with configure' '--disable-user' '--disable-system' This is fixed here. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-21Eliminate cpus-x86_64.conf fileEduardo Habkost1-1/+0
This file is not needed anymore, as QEMU won't ship any config-based cpudefs out of the box, relying only on the builtin CPU models. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-12qemu-img: Add json output option to the info command.Benoît Canet1-1/+2
This option --output=[human|json] make qemu-img info output on human or JSON representation at the choice of the user. example: { "snapshots": [ { "vm-clock-nsec": 637102488, "name": "vm-20120821145509", "date-sec": 1345553709, "date-nsec": 220289000, "vm-clock-sec": 20, "id": "1", "vm-state-size": 96522745 }, { "vm-clock-nsec": 28210866, "name": "vm-20120821154059", "date-sec": 1345556459, "date-nsec": 171392000, "vm-clock-sec": 46, "id": "2", "vm-state-size": 101208714 } ], "virtual-size": 1073741824, "filename": "snap.qcow2", "cluster-size": 65536, "format": "qcow2", "actual-size": 985587712, "dirty-flag": false } Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-15Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori1-5/+2
* stefanha/trivial-patches: ivshmem, qdev-monitor: fix order of qerror parameters iov_send_recv(): Handle zero bytes case even if OS does not framebuffer: Fix spelling in comment (leight -> height) Spelling fix in comment (peripherans -> peripherals) docs: Fix spelling (propery -> property) trace: Fix "Qemu" -> "QEMU" cputlb.c: Fix out of date comment ehci: fix assertion typo Makefile: Avoid explicit list of directories in clean target
2012-08-15Makefile: Avoid explicit list of directories in clean targetPeter Maydell1-5/+2
Avoid having an explicit list of directories in the 'clean' target by using 'find' to remove all .o and .d files instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-15block: Enable qemu_open/close to work with fd setsCorey Bryant1-3/+3
When qemu_open is passed a filename of the "/dev/fdset/nnn" format (where nnn is the fdset ID), an fd with matching access mode flags will be searched for within the specified monitor fd set. If the fd is found, a dup of the fd will be returned from qemu_open. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-11Makefile: add qapi.py dependenciesStefan Hajnoczi1-6/+8
Commit 427a1a2cb1d35b83b6302886f46289f6d617134d ("qapi: avoid reserved keywords") modifies qapi.py, which is used by qapi-types.py and other Python scripts. Because Makefile has no dependencies for qapi.py the qapi code generator will not be rerun and the following build error is produced: net/slirp.c: In function ‘net_init_slirp’: net/slirp.c:721:50: error: ‘NetdevUserOptions’ has no member named ‘q_restrict’ Fix this issue by adding the missing qapi.py dependencies. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-03qom: Clean libuser object and dependency filesJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-03usb: Clean common object and dependency filesJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-29build: Fix linking failure for qemu-gaDunrong Huang1-10/+9
This patch will fix the following linking failed: LINK qemu-ga gcc: error: qga/../qapi-generated/qga-qapi-types.o: No such file or directory gcc: error: qga/../qapi-generated/qga-qapi-visit.o: No such file or directory gcc: error: qga/../qapi-generated/qga-qmp-marshal.o: No such file or directory make: *** [qemu-ga] Error 1 Commit cdc976b040f2760103ce2fb49f4d504093a7163f changes the dependencies of qemu-ga to depend "../qapi-generated/qga-qapi-types.o", which will be expanded to "qga/../qapi-generated/qga-qapi-types.o" when building qemu-ga. In top-level Makefile, we defined a target "qapi-generated/qga-qapi-types.o" which was not equal to "qga/../qapi-generated/qga-qapi-types" in the Makefile world. So "No such file" error happened when qemu-ga was linking. The easy approach to fix is to change the target name to "qga/../qapi-generated/qga-qapi-types.o", but it is weird. So, in order to solve it more graciously, I move those temporary files(qga-qapi-*.{c,h}) qemu-ga depends on to qemu-ga/qapi-generated, this makes dependencies more clearer. Signed-off-by: Dunrong Huang <riegamaths@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-28build: get dependency file directories from object file namesPaolo Bonzini1-2/+2
After commit dcff25f2cd8c11a9368cc2369aeb0319c32d9e26, Dependency file are taken from the directories that have a Makefile.objs file. This is not enough, since files can be included from other directories. So, pick them from directories that have an object file in them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-28build: include qapi-generated/ files in qga/Makefile.objsPaolo Bonzini1-1/+1
No reason to leave them out, and it will ensure that the dependencies are picked up. Later we can perhaps move the files to another directory to avoid ../ usage. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-17build: fix build breakage due to bad mergeAnthony Liguori1-7/+4
34bb443ee74df3780d86044dbf6492eb798c5807 broke the build but in a subtle way. The patch on the ML was actually based on the 1.1.1 stable branch (accidentally). When I merged it from the ML, the fuzzing got resolved in a such a way that the newly introduced Makefile dependency on GENERATED_HEADERS got lost (that was not in 1.1.1). The dist bits also got duplicated (but this is just cosmetic). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17build: add make dist target (v2)Anthony Liguori1-15/+15
Let's stop screwing up releases by having a script do the work that Anthony's fat fingers can't seem to get right. Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-13make: Remove 'build-all' ruleStefan Weil1-3/+3
It is not needed, because the 'all' rule does the same. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-09Merge remote-tracking branch 'mjt/mjt-iov2' into stagingAnthony Liguori1-1/+2
* mjt/mjt-iov2: rewrite iov_send_recv() and move it to iov.c cleanup qemu_co_sendv(), qemu_co_recvv() and friends export iov_send_recv() and use it in iov_send() and iov_recv() rename qemu_sendv to iov_send, change proto and move declarations to iov.h change qemu_iovec_to_buf() to match other to,from_buf functions consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent allow qemu_iovec_from_buffer() to specify offset from which to start copying consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset() rewrite iov_* functions change iov_* function prototypes to be more appropriate virtio-serial-bus: use correct lengths in control_out() message Conflicts: tests/Makefile Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-26Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori1-12/+12
* stefanha/trivial-patches: tci: Support INDEX_op_bswap64_i64 target-i386: Use QEMU instead of Qemu Makefile.hw: avoid overly large 'make clean' rm command configure: Fix typo arm_gic: Send dbg msgs to stderr not stdout checkpatch: Add QEMU specific rule qemu-config: Use QEMU instead of Qemu libqtest: Fix socket_accept() to pass address_len Makefile.user: Define CONFIG_USER_ONLY for libuser/ Makefile: Remove macro qapi-dir Makefile: Remove BUILD_DIR from qapi-dir Install 'bepo' keymap already included in Qemu source
2012-06-24PPC: e500: dt: start with empty device treeAlexander Graf1-1/+0
Now that all of the device tree bits are generated during runtime, we can get rid of the device tree blob and instead start from scratch with an empty device tree. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-22Makefile: Remove macro qapi-dirStefan Weil1-11/+10
As qapi-dir was now a constant, it can be replaced by its value. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-06-22Makefile: Remove BUILD_DIR from qapi-dirStefan Weil1-1/+1
qapi-dir does not need an absolute path. All other build directories are relative. When BUILD_DIR is removed, the build output looks better (no long lines with absolute paths when everything else uses short lines): GEN qapi-generated/qga-qapi-types.c CC qapi-generated/qga-qapi-types.o GEN qapi-generated/qga-qapi-visit.c CC qapi-generated/qga-qapi-visit.o GEN qapi-generated/qga-qmp-marshal.c CC qapi-generated/qga-qmp-marshal.o Using a relative path also avoids potential problems when BUILD_DIR includes blanks. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-06-22Install 'bepo' keymap already included in Qemu sourceFrédéric Boiteux1-1/+2
The 'bepo' layout (a french dvorak-like keyboard layout) was added about one year ago, (see commit 2a3c633c1eb8692716220195b6d3fe78b7e411d0), but I missed to declare to install it. Signed-off-by: Frédéric Boiteux <fboiteux@free.fr> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-06-21libcacard: build fixesBlue Swirl1-2/+2
Link trace objects to fix these errors: LINK vscclient oslib-posix.o: In function `trace_qemu_vfree': /src/qemu/obj-amd64/./trace.h:39: undefined reference to `trace1' oslib-posix.o: In function `trace_qemu_memalign': /src/qemu/obj-amd64/./trace.h:31: undefined reference to `trace3' oslib-posix.o: In function `trace_qemu_vmalloc': /src/qemu/obj-amd64/./trace.h:35: undefined reference to `trace2' Add LDFLAGS to vscclient link command. Clean up also in subdirectories of libcacard. Use quiet-command for sed invocation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Alon Levy <alevy@redhat.com>
2012-06-19make: automatically include dependencies in recursive subdir rules (v2)Anthony Liguori1-2/+2
I think I understand enough of what's going on in these rules to ensure this is right. But I could certainly use a second or third opinion... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-15build: install qmp-commands.txtBruce Rogers1-0/+1
File is targeted for install, but is never installed. Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-11consolidate qemu_iovec_memset{,_skip}() into single function and use ↵Michael Tokarev1-1/+2
existing iov_memset() This patch combines two functions into one, and replaces the implementation with already existing iov_memset() from iov.c. The new prototype of qemu_iovec_memset(): size_t qemu_iovec_memset(qiov, size_t offset, int fillc, size_t bytes) It is different from former qemu_iovec_memset_skip(), and I want to make other functions to be consistent with it too: first how much to skip, second what, and 3rd how many of it. It also returns actual number of bytes filled in, which may be less than the requested `bytes' if qiov is smaller than offset+bytes, in the same way iov_memset() does. While at it, use utility function iov_memset() from iov.h in posix-aio-compat.c, where qiov was used. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-07build: limit usage of vpathPaolo Bonzini1-1/+1
All paths are now explicitly given, and the object tree mimics the source tree, so there is no need to apply special vpaths. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: libcacard Makefile cleanupsPaolo Bonzini1-0/+4
Build vscclient from toplevel Makefile, limit usage of vpath. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move target-independent hw/ objects to nested Makefile.objsPaolo Bonzini1-2/+4
This patch starts converting the hw/ directory. Some files in hw/ are compiled once, some twice (32-/64-bit), some once per target. Each category is moved in a separate patch. After this patch, the files that are compiled once will show the same hierarchy in the build tree as they do in the source tree, for example hw/qdev.o instead of just qdev.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move fsdev/ objects to nested Makefile.objsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: do not sprinkle around GENERATED_HEADERS dependenciesPaolo Bonzini1-9/+9
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex. We can simply make the Makefile depend on them, and they will be built before all other targets. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-10move CPU definitions to /usr/share/qemu/cpus-x86_64.conf (v2)Eduardo Habkost1-3/+9
Changes v1 -> v2: - userconfig variable is now bool, not int Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-26Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori1-4/+4
* stefanha/tracing: Beautify makefile commands for generation of files with tracetool Generic elimination of auto-generated files
2012-04-26sdl: Add QEMU mascot icon for use with SDLStefan Weil1-0/+1
This is a bitmap file (32x32x4) derived from the official QEMU mascot (which was designed by Benoît Canet). I stripped the text from the SVG to get a nearly square image and converted the result to BMP without any manual optimization. The bitmap is currently used by QEMU's SDL interface and replaces the default X icon. v2: Add qemu-icon.bmp to Makefile. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-25Generic elimination of auto-generated filesLluís Vilanova1-4/+4
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-24config-host.mak: rename docdir to qemu_docdirEduardo Habkost1-2/+2
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24Makefile: use $(qemu_confdir) instead of $(sysconfdir)/qemuEduardo Habkost1-2/+2
Instead of hardcoding the directory suffix, use the qemu-specific directory variable. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: rename datadir to qemu_datadirEduardo Habkost1-4/+4
Autoconf concept of "datadir" is supposed to be "$prefix/share", not "$prefix/share/PACKAGE", so using datadir for the Qemu-specific directory is confusing. The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now create_config generates the same #define name (CONFIG_QEMU_DATADIR) for both "datadir" and "qemu_datadir" variables. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-12make: Always set LC_ALL=C for makeinfoStefan Weil1-1/+1
Otherwise the generated file qemu-doc.html will contain "Anhang" instead of "Appendix" with a German locale (de_DE.UTF-8). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-03make: fix clean rule by removing build file in qom/Anthony PERARD1-0/+1
Make clean does not clean the 'qom' directory, leaving *.o and *.d files. This patch fixes this. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-31buildfix: check for old pod2man versionsGerd Hoffmann1-1/+0
Older pod2man don't have a --utf8 switch, check for this in conffigure and use it only when present. Fixes build on RHEL-5. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-29 07:43:09 +0000