Age | Commit message (Collapse) | Author | Files | Lines |
|
Remove the symlink to tests/tcg/config-*.mak, which is possible now
that unused target config files are not created either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-28-alex.bennee@linaro.org>
|
|
It will not be specific to tests/tcg anymore, since it will be possible to
build firmware using container-based cross compilers too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-26-alex.bennee@linaro.org>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-17-alex.bennee@linaro.org>
|
|
Because of two stray parentheses at the end of the definition of
ninja-cmd-goals, the test that is last in the .check-TESTSUITENAME.deps
variable will not be rebuilt. Fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Developers often run QEMU without installing. The bundle mechanism
allows to look up files which should be present in installation even in
such a situation.
It is a general mechanism and can find any files in the installation
tree. The build tree will have a new directory, qemu-bundle, to
represent what files the installation tree would have for reference by
the executables.
Note that it abandons compatibility with Windows older than 8. The
extended support for the prior version, 7 ended more than 2 years ago,
and it is unlikely that someone would like to run the latest QEMU on
such an old system.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220624145039.49929-3-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 45f1eecdd63f9e4fa93fef01dd826e7706ac6d7b removed the dependency
from configure to pc-bios
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624150258.50449-1-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Include the full path in TARGET_DIR, so that messages from sub-Makefiles
are clearer. Also, prepare for possibly building firmware outside
pc-bios/ from the Makefile,
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Let any make target specify ninja goals that needs to be built for it
(though selecting the goals is _not_ recursive on depending targets)
instead of having a custom mechanism only for "make check" and "make
bench".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-15-alex.bennee@linaro.org>
|
|
Fix an incorrect "@@:" and move "-d keepdepfile" to the NINJAFLAGS variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-14-alex.bennee@linaro.org>
|
|
qemu-plugins.symbols is now processed in Meson.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Left over .gcno files from old builds can really confuse gcov and the
user expects a clean slate after "make clean". Make clean mean clean.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-4-alex.bennee@linaro.org>
|
|
This introduces
https://gitlab.com/libvirt/libvirt-ci
as a git submodule at tests/lcitool/libvirt-ci
The 'lcitool' program within this submodule will be used to
automatically generate build environment manifests from a definition
of requirements in tests/lcitool/projects/qemu.yml
It will ultimately be capable of generating
- Dockerfiles
- Package lists for installation in VMs
- Variables for configuring Cirrus CI environments
When a new build pre-requisite is needed for QEMU, if this package
is not currently known to libvirt-ci, it must first be added to the
'mappings.yml' file in the above git repo.
Then the submodule can be updated and the build pre-requisite added
to the tests/lcitool/projects/qemu.yml file. Now all the build env
manifests can be re-generated using 'make lcitool-refresh'
This ensures that when a new build pre-requisite is introduced, it
is added to all the different OS containers, VMs and Cirrus CI
environments consistently.
It also facilitates the addition of containers targetting new distros
or updating existing containers to new versions of the same distro,
where packages might have been renamed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-8-berrange@redhat.com>
Message-Id: <20220105135009.1584676-8-alex.bennee@linaro.org>
|
|
This ensures that the file is regenerated properly whenever config-target.h
or config-devices.h files change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These files have been removed for more than year in the best
case, or for more than ten years for some really old TCG files.
Remove any traces of it.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
"meson test" starting with version 0.57 is just as capable and easy to
use as QEMU's own TAP driver. All existing options for "make check"
work. The only required code change involves how to mark "slow" tests;
they need to belong to an additional "slow" suite.
The rules for .tap output are replaced by JUnit XML; GitLab is able
to parse that output and present it in the CI pipeline report.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch fixes actually two issues with 'make cscope'.
Firstly, it fixes the command for MacOS "find" command as MacOS will append the
full path of "$(SRC_PATH)/" before each found entry, then after the final "./"
replacement trick it'll look like (e.g., "qapi/qmp-dispatch.c"):
/qapi/qmp-dispatch.c
Which will point to the root directory instead.
Fix it by simply remove the "/" in "$(SRC_PATH)/" of "find-src-path", then
it'll work for at least both Linux and MacOS.
The other OS-independent issue is to start proactively ignoring soft links when
generating tags, otherwise by default on master branch we'll see this error
when "make cscope":
cscope: cannot find file subprojects/libvhost-user/include/atomic.h
This patch should fix the two issues altogether.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210804132328.41353-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We should use "-print" or otherwise all "-prone" is ignored.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210804132328.41353-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Prepare the configure script and Makefile for automatically generated
help and parsing.
Because we need to run the script to generate the full help, we
cannot rely on the user supplying the path to a Python interpreter
with --python; therefore, the introspection output is parsed into
shell functions and stored in scripts/. The converter is written
in Python as standard for QEMU, and this commit contains a stub.
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211007130829.632254-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When searching for options like -n in MAKEFLAGS, current code may result
in a false positive match when make is invoked with long options like
--no-print-directory. This has been observed with certain versions of
host make (e.g. 3.82) while building the Qemu package in buildroot.
Filter out such long options before searching for one-character options.
Signed-off-by: Alexey Neyman <stilor@att.net>
Message-Id: <20210722020846.3678817-1-stilor@att.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The wrapper should not be needed here (it's not the shebang line of
a shell script), and it is causing trouble on Haiku where "env"
resides in a different directory.
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210705082542.936856-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not guard each assignment with a check for --with-git-submodules=ignore.
To avoid a confusing "GIT" line from the Makefile, guard the git-submodule-update
recipe so that it is empty when --with-git-submodules=ignore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We are generating a lot of target-specific defines in the *-config-devices.h
and *-config-target.h files. Using them in common code is wrong and leads
to very subtle bugs since a "#ifdef CONFIG_SOMETHING" is not working there
as expected. To avoid these issues, we are already poisoning many of the
macros in include/exec/poison.h - but it's cumbersome to maintain this
list manually. Thus let's generate an additional list of poisoned macros
automatically from the current config switches - this should give us a
much better test coverage via the different CI configurations.
Note that CONFIG_TCG (which is also defined in config-host.h) and
CONFIG_USER_ONLY are special, so we have to filter these out.
Message-Id: <20210414112004.943383-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
After reading the dependency file, ninja just deletes it, in the name
of cleanliness I guess. However this complicates debugging unnecessarily
compared to good old "-include *.d". Use the keepdepfile debugging
option to make it easier to see what is going on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210215122103.63933-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We have a bunch of -help targets so this will save some cognitive
dissonance. Keep the original for those with muscle memory.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210202134001.25738-6-alex.bennee@linaro.org>
|
|
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.
Drop group file, as it becomes unused.
Drop common.env: now check is in python, and for tests we use same
python interpreter that runs the check itself. Use build environment
PYTHON in check-block instead, to keep "make check" use the same
python.
Checking for virtio-blk moved to iotests.py, as it actually iotests.py
dependency. Actually not all python iotests depend on it, so in future
it may be refactored to checked only when really needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For prettier output.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-8-alex.bennee@linaro.org>
|
|
For prettier output.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-7-alex.bennee@linaro.org>
|
|
For prettier output.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-6-alex.bennee@linaro.org>
|
|
GNU Global is another tags engine which is more like cscope in being
able to support finding both references and definitions. You will be
un-surprised to know it also integrates well with Emacs.
The main benefit of integrating it into find-src-path is it takes less
time to rebuild the database from scratch when you have a lot of build
directories under your source tree.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-3-alex.bennee@linaro.org>
|
|
The dummy targets ensure that incremental build can be done after
deleting a meson.build file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It doesn't bring much to have echoing with "make help". Suppress it
unconditionally.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160459122012.462591.8467906402712875729.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A misplaced $(quiet-@) meant that "make clean" and "make distclean" did
not work properly.
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging
Pull request trivial branch 20201027
# gpg: Signature made Tue 27 Oct 2020 16:29:47 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
CHANGELOG: remove disused file
qdev: Fix two typos
scripts/qmp: delete 'qmp' script
cryptodev: Fix Lesser GPL version number
io: Fix Lesser GPL version number
cpus: Drop declaration of cpu_remove()
Makefile: Add *.[ch].inc files to cscope/ctags/TAGS
elf2dmp: Fix memory leak on main() error paths
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The code base has some C source and header files that don't get indexed
because their name ends with .inc:
$ git ls-files "*.[ch].inc" | wc -l
66
Add them to the list.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160258069310.900922.1495166540282536628.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Use $(findstring) instead of $(filter) to detect -n/-k
as different versions of MAKE fill in $(MAKEFLAGS) differently.
Do not bother running ninja at all if -nq is passed.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026155854.3074290-1-pbonzini@redhat.com>
|
|
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The rules to build Makefile.mtest are suffering from the "tunnel vision"
problem that is common with recursive makefiles. Makefile.mtest depends
on build.ninja, but Make does not know when build.ninja needs to be
rebuilt before creating Makefile.mtest.
To fix this, separate the ninja invocation into the "regenerate build
files" phase and the QEMU build phase. Sentinel files such as
meson-private/coredata.dat or build.ninja are used to figure out the
phases that haven't run yet; however, because those files' timestamps
are not guaranteed to be touched, the usual makefile stamp-file trick
is used on top.
Reported-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Group similar rules, add comments to "else" and "endif" lines,
detect too-old config-host.mak before messing things up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Without pipefail, it is possible to miss failures if the recipes
include pipes.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Tools usually expect the index files to be in the source tree, eg. emacs.
This is already the case when doing out-of-tree builds, but with in-tree
builds they end up in the build directory.
Force cscope, ctags and etags to put them in the source tree.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160277334665.1754102.10921580280105870386.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Build the library via the main meson.build just like for capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libfdt.a, which we wouldn't
do before-hand, and lets us remove the whole recursive make machinery.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.
Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files". Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.
Instead, build the library via the main meson.build.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand. In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Right now all "make check" targets depend blindly on "all". If Meson
is 0.56.0 or newer, we can use the correct dependencies using the new
"depends" entry in "meson introspect --tests".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The QEMU_GA_MSI_ENABLED config-host.mak variable is emitted by
./configure. meson.build actually checks for CONFIG_QGA_MSI_ENABLED:
summary_info += {'QGA MSI support': config_host.has_key('CONFIG_QGA_MSI_ENABLED')}
Rename QEMU_GA_MSI_ENABLED to CONFIG_QGA_MSI for consistency with
CONFIG_QGA_VSS. Also use 'y' instead of 'yes' for consistency.
This fixes the feature summary printed by meson.build.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200914095231.621068-4-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Convert qemu-qmp-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-qmp-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
Again, we drop the direct link from index.html.in now that
the QMP ref is part of the interop manual.
This commit removes the code from the root meson.build file that
handled the various Texinfo-based outputs, because we no longer
generate any documentation except for the Sphinx HTML manuals and the
manpages, and the code can't handle having an empty list of files
to process.. We'll do further cleanup of the remainders of
Texinfo support in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added, "make html" fixed,
storage-daemon/qapi/meson.build updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The file "BaseTools/Source/Python/UPT/Dll/sqlite3.dll" was removed in edk2
commit 26e2b295ec7a ("BaseTools:Remove unused
BaseTools\Source\Python\UPT\Dll", 2019-05-08), part of edk2-stable201905,
so skipping it in the outermost in-tree "clean" rule is unnecessary.
Remove the obsolete pathname reference.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908072939.30178-2-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|