| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add (partial) emulation of the on-board GPU of the machine. This
allows the PMON2000 firmware to run and should also work with Linux
console but probably not with X yet.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-id: da6370b22e0352ee803d25d68a62ff32eebf06e2.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI
gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and
guests running on these and the PMON2000 firmware of the fulong2e
expect this to be available. Fortunately these are very similar chips
so they can be mostly emulated in the same device model. This patch
adds basic emulation of these ATI VGA chips.
While this is incomplete and currently only enough to run the MIPS
firmware and get framebuffer output with Linux, it allows the fulong2e
board to work more like the real hardware and having it in QEMU in
this state provides a way to experiment with it and allows others to
contribute to improve it. It is compiled for all archs but only the
fulong2e (which currently has no display output at all) is set to use
it by default (in a separate patch).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-4-kraxel@redhat.com
|
|
Store reset handler of the parent class and just call that for a
complete virtio reset. When taking the shortcut and calling
virtio_gpu_reset() directly the generic virtio reset code (for
virtqueues etc) will not be executed.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1597621
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-3-kraxel@redhat.com
|
|
Needed when VirtioPCIClass subclasses have their own
class struct with some extra fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-2-kraxel@redhat.com
|
|
staging
nbd patches for 2019-03-08
- support TLS client authorization in NBD servers
- iotest 223 race fix
# gpg: Signature made Fri 08 Mar 2019 17:37:59 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-03-08:
iotests: Wait for qemu to end in 223
nbd: fix outdated qapi docs syntax for tls-creds
nbd: allow authorization with nbd-server-start QMP command
qemu-nbd: add support for authorization of TLS clients
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
Pull request
# gpg: Signature made Fri 08 Mar 2019 16:53:34 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
iothread: document about why we need explicit aio_poll()
iothread: push gcontext earlier in the thread_fn
iothread: create main loop unconditionally
iothread: create the gcontext unconditionally
iothread: replace init_done_cond with a semaphore
hw/block/virtio-blk: Clean req->dev repetitions
MAINTAINERS: add missing support status fields
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Block layer patches:
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
# gpg: Signature made Fri 08 Mar 2019 12:54:27 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
qcow2 spec: Describe string header extensions
qemu-iotests: Add dependency to qemu-nbd tool
ahci-test: Add dependency to qemu-img tool
qemu-iotests: amend with external data file
qemu-iotests: General tests for qcow2 with external data file
qemu-iotests: Preallocation with external data file
qcow2: Implement data-file-raw create option
qcow2: Store data file name in the image
qcow2: Creating images with external data file
qcow2: Add basic data-file infrastructure
qcow2: Support external data file in qemu-img check
qcow2: Return error for snapshot operation with data file
qcow2: External file I/O
qcow2: Prepare qcow2_co_block_status() for data file
qcow2: Return 0/-errno in qcow2_alloc_compressed_cluster_offset()
qcow2: Don't assume 0 is an invalid cluster offset
qcow2: Prepare count_contiguous_clusters() for external data file
qcow2: Prepare qcow2_get_cluster_type() for external data file
qcow2: Pass bs to qcow2_get_cluster_type()
qcow2: Basic definitions for external data files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/bkoppelmann/tags/pull-tricore-2019-03-08' into staging
Fixes mixed up operands in CADDN and CADD
# gpg: Signature made Fri 08 Mar 2019 09:45:05 GMT
# gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg: issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [full]
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14
* remotes/bkoppelmann/tags/pull-tricore-2019-03-08:
tricore: fixed RCR_CADDN instruction
tricore: fixed RCR_CADD instruction
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/huth-gitlab/tags/pull-request-2019-03-08' into staging
- qtest fixes
- Some generic clean-ups by Philippe
- macOS CI testing via cirrus-ci.com
# gpg: Signature made Fri 08 Mar 2019 08:58:47 GMT
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-03-08:
cirrus.yml: Add macOS continuous integration task
tests/bios-tables: Improve portability by searching bash in the $PATH
vhost-user-test: fix leaks
tests: Do not use "\n" in g_test_message() strings
hw/devices: Remove unused TC6393XB_RAM definition
hw: Remove unused 'hw/devices.h' include
tests: Move qdict-test-data.txt to tests/data/qobject/
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/vhost-user-test.c
|
|
Fix use after free on temporary.
Optmize branch to next insn via br r0.
# gpg: Signature made Fri 08 Mar 2019 01:53:16 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-hppa-20190307:
target/hppa: Optimize blr r0,rn
target/hppa: Do not return freed temporary
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
qgraph project from GSoC 2018
# gpg: Signature made Thu 07 Mar 2019 16:29:17 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream-qgraph: (57 commits)
qos-test: megasas test node
qos-test: e1000 test node
qos-test: eepro100 test node
qos-test: es1370 test node
qos-test: vmxnet3 test node
qos-test: usb-hcd-ohci test node
qos-test: spapr-phb test node
qos-test: pcnet test node
qos-test: nvme test node
qos-test: ne2k_pci test node
qos-test: ipoctal232 test node
qos-test: tpci200 test node
qos-test: ac97 test node
tests: move virtio entirely to qos-test
tests/libqos: remove pre-qgraph QVirtioPCIDevice API
qos-test: virtio-scsi test node
tests/libqos: virtio-scsi driver and interface nodes
qos-test: vhost-user test node
vhost-user-test: always use 256 MiB of guest memory
tests/libqos: support multiqueue for virtio-net
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
Slirp updates
Greg Kurz (1):
slirp: Fix build with gcc 9
Marc-André Lureau (7):
slirp: adapt a subset of QEMU vmstate code
slirp: use libslirp migration code
slirp: use "slirp_" prefix for inet_aton() win32 implementation
slirp: move sources to src/ subdirectory
slirp: add a standalone Makefile
build-sys: link with slirp as an external project
slirp: remove QEMU Makefile.objs
Samuel Thibault (2):
slirp: fix big/little endian conversion in ident protocol
slirp: Mark pieces missing IPv6 support
Vic Lee (1):
slirp: check for ioctlsocket error and 0-length udp payload.
William Bowling (1):
slirp: check sscanf result when emulating ident
# gpg: Signature made Thu 07 Mar 2019 11:51:20 GMT
# gpg: using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg: aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: E61D BB15 D417 2BDE C97E 92D9 DB55 0E89 F0FA 54F3
* remotes/thibault/tags/samuel-thibault:
slirp: remove QEMU Makefile.objs
build-sys: link with slirp as an external project
slirp: add a standalone Makefile
slirp: move sources to src/ subdirectory
slirp: use "slirp_" prefix for inet_aton() win32 implementation
slirp: use libslirp migration code
slirp: adapt a subset of QEMU vmstate code
slirp: Mark pieces missing IPv6 support
slirp: fix big/little endian conversion in ident protocol
slirp: check sscanf result when emulating ident
slirp: check for ioctlsocket error and 0-length udp payload.
slirp: Fix build with gcc 9
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Be more specific about the string representation in header extensions.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Since a9660664fde, some iotests use qemu-nbd.
Add a dependency to build it before using it.
This fixes:
$ make check-block
GEN qemu-img-cmds.h
CC qemu-img.o
LINK qemu-img
CC qemu-io.o
LINK qemu-io
CC tests/qemu-iotests/socket_scm_helper.o
LINK tests/qemu-iotests/socket_scm_helper
tests/qemu-iotests-quick.sh
check: qemu-nbd not found
make: *** [tests/Makefile.include:1059: check-tests/qemu-iotests-quick.sh] Error 1
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since the ahci-test uses qemu-img, add a dependency to build it
before using it.
This fixes:
$ gmake check-qtest V=1
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test
Failed to execute child process "/tmp/qemu-test.19tMRF/qemu-img" (No such file or directory)
ERROR:tests/libqos/libqos.c:192:mkimg: assertion failed: (ret && !err)
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Test that preallocating metadata results in a somewhat larger qcow2
file, but preallocating data only affects the disk usage of the data
file and the qcow2 file stays small.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Rather than requiring that the external data file node is passed
explicitly when creating the qcow2 node, store the filename in the
designated header extension during .bdrv_create and read it from there
as a default during .bdrv_open.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds a .bdrv_create option to use an external data file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds a .bdrv_open option to specify the external data file node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For external data files, data clusters must be excluded from the
refcount calculations. Instead, an implicit refcount of 1 is assumed for
the COPIED flag.
Compressed clusters and internal snapshots are incompatible with
external data files, so print an error if they are in use for images
with an external data file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Internal snapshots and an external data file are incompatible because
snapshots require refcounting and non-linear mapping. Return an error
for all of the snapshot operations if an external data file is in use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This changes the qcow2 implementation to direct all guest data I/O to
s->data_file rather than bs->file, while metadata I/O still uses
bs->file. At the moment, this is still always the same, but soon we'll
add options to set s->data_file to an external data file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Offset 0 cannot be assumed to mean an unallocated cluster any more.
Instead, the cluster type needs to be checked.
*file must refer to the data file instead of the image file if a valid
offset is returned from qcow2_co_block_status().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow2_alloc_compressed_cluster_offset() used to return the cluster
offset for success and 0 for error. This doesn't only conflict with 0 as
a valid host offset, but also loses the error code.
Similar to the change made to qcow2_alloc_cluster_offset() for
uncompressed clusters in commit 148da7ea9d6, make the function return
0/-errno and return the allocated cluster offset in a by-reference
parameter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The cluster allocation code uses 0 as an invalid offset that is used in
case of errors or as "offset not yet determined". With external data
files, a host cluster offset of 0 becomes valid, though.
Define a constant INV_OFFSET (which is not cluster aligned and will
therefore never be a valid offset) that can be used for such purposes.
This removes the additional host_offset == 0 check that commit
ff52aab2df5 introduced; the confusion between an invalid offset and
(erroneous) allocation at offset 0 is removed with this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Offset 0 can be valid for normal (allocated) clusters now, so use
qcow2_get_cluster_type() instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds basic constants, struct fields and helper function for
external data file support to the implementation.
QCOW2_INCOMPAT_MASK and QCOW2_AUTOCLEAR_MASK are not updated yet so that
opening images with an external data file still fails (we don't handle
them correctly yet).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds external data file to the qcow2 spec as a new incompatible
feature.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Image creation already involves a bdrv_co_truncate() call, which allows
to specify a preallocation mode. Just pass the right mode there and
remove the code that is made redundant by this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Various sed regexp from common.filter use sed GNU extensions.
Instead of spending time to write these regex to be POSIX compliant,
verify the GNU sed is available and use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Patch created mechanically by running:
$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Some test cases require specific formats. The method decorator
skip_if_unsupported() checks if requested formats are whitelisted.
The test #139 was selected for a sample output, after running
$ ./check -qcow2 131-140
137 3s ...
138 0s ...
139 2s ...
[case not run] testBlkDebug (__main__.TestBlockdevDel): formats ['blkdebug'] are not whitelisted
[case not run] testBlkVerify (__main__.TestBlockdevDel): formats ['blkverify'] are not whitelisted
[case not run] testQuorum (__main__.TestBlockdevDel): formats ['quorum'] are not whitelisted
140 0s ...
Not run: 131 135 136
Some cases not run in: 139
Passed all 7 tests
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Supported formats listed by 'qemu' may differ from those listed by
'qemu-img' due to whitelists. Some test cases require specific formats
that may be used with qemu. They can be inquired directly by running
'qemu -drive format=help'. The response takes whitelists into account.
The method supported_formats() serves for that. The method decorator
skip_if_unsupported() checks if all requested formats are whitelisted.
If not, the test case will be skipped. That has been implemented in
the 'check' file in the way similar to the 'test notrun' mechanism.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_iterate_format (which is currently only used for printing out the
formats supported by the block layer) doesn't take format whitelisting
into account.
This creates a problem for tests: they enumerate supported formats to
decide which tests to enable, but then discover that QEMU doesn't let
them actually use some of those formats.
To avoid that, exclude formats that are not whitelisted from
enumeration, if whitelisting is in use. Since we have separate
whitelists for r/w and r/o, take this a parameter to
bdrv_iterate_format, and print two lists of supported formats (r/w and
r/o) in main qemu.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Replace the binary mode with the default text one when *.notrun
files are opened for skipped tests. That change is made for the
compatibility with Python 3 which returns error otherwise.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
QEMU 2.12 (commit 1221fe6f636754ab5f2c1c87caa77633e9123622) introduced
a new setting called l2-cache-entry-size that allows making entries on
the qcow2 L2 cache smaller than the cluster size.
I have been performing several tests with different cluster and entry
sizes and all of them show that reducing the entry size (aka L2 slice)
consistently improves I/O performance, notably during random I/O (all
tests done with sequential I/O show similar results). This is to be
expected because loading and evicting an L2 slice is more expensive
the larger the slice is.
Here are some numbers on fully populated 40GB qcow2 images. The
rightmost column represents the maximum L2 cache size in both cases.
Cluster size = 64 KB
|-------------+--------------+--------------+--------------|
| | 1MB L2 cache | 3MB L2 cache | 5MB L2 cache |
|-------------+--------------+--------------+--------------|
| 4KB slices | 6545 IOPS | 12045 IOPS | 55680 IOPS |
| 16KB slices | 5177 IOPS | 9798 IOPS | 56278 IOPS |
| 64KB slices | 2718 IOPS | 5326 IOPS | 57355 IOPS |
|-------------+--------------+--------------+--------------|
Cluster size = 256 KB
|--------------+----------------+--------------+-----------------|
| | 512KB L2 cache | 1MB L2 cache | 1280KB L2 cache |
|--------------+----------------+--------------+-----------------|
| 4KB slices | 8539 IOPS | 21071 IOPS | 55417 IOPS |
| 64KB slices | 3598 IOPS | 9772 IOPS | 57687 IOPS |
| 256KB slices | 1415 IOPS | 4120 IOPS | 58001 IOPS |
|--------------+----------------+--------------+-----------------|
As can be seen in the numbers, the only exception to the rule is when
the cache is large enough to hold all L2 tables. This is also to be
expected because in this case no cache entry is ever evicted so
reducing its size doesn't bring any benefit.
This patch sets the default L2 cache entry size to 4KB except when the
cache is large enough for the whole disk.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Test 238 does not require the kvm accelerator. Using the qtest
accelerator allows the test to run in both non-kvm and non-tcg
environments.
iotests.VM implicitly uses the qtest accelerator and is really the class
that this test should be using. Switch to that instead of
qemu.QEMUMachine.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
into staging
Initial Kconfig work, excluding ARM and MIPS
# gpg: Signature made Thu 07 Mar 2019 20:54:27 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream-kconfig: (54 commits)
kconfig: add documentation
.travis.yml: test that no-default-device builds do not regress
xtensa-softmmu.mak: express dependencies with Kconfig
unicore32-softmmu.mak: express dependencies with Kconfig
sparc64-softmmu.mak: express dependencies with Kconfig
sparc-softmmu.mak: express dependencies with Kconfig
sh4-softmmu.mak: express dependencies with Kconfig
s390x: express dependencies with Kconfig
riscv-softmmu.mak: replace CONFIG_* with Kconfig "select" directives
or1k-softmmu.mak: express dependencies with Kconfig
nios2-softmmu.mak: express dependencies with Kconfig
moxie-softmmu.mak: express dependencies with Kconfig
microblaze-softmmu.mak: express dependencies with Kconfig
m68k-softmmu.mak: express dependencies with Kconfig
lm32-softmmu.mak: express dependencies with Kconfig
hppa-softmmu.mak: express dependencies with Kconfig
cris-softmmu.mak: express dependencies with Kconfig
alpha-softmmu.mak: express dependencies with Kconfig
ppc: Express dependencies of the embedded machines with kconfig
ppc: Express dependencies of the Sam460EX machines with kconfig
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
After consulting Paolo I know why we'd better keep the explicit
aio_poll() in iothread_run(). Document it directly into the code so
that future readers will know the answer from day one.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190306115532.23025-6-peterx@redhat.com
Message-Id: <20190306115532.23025-6-peterx@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
We were pushing the context until right before running the gmainloop.
Now since we have everything unconditionally, we can move this
earlier.
One benefit is that now it's done even before init_done_sem, so as
long as the iothread user calls iothread_create() and completes, we
know that the thread stack is ready.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20190306115532.23025-5-peterx@redhat.com
Message-Id: <20190306115532.23025-5-peterx@redhat.com>
[Tweaked comment wording as discussed with Peter Xu.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Since we've have the gcontext always there, create the main loop
altogether. The iothread_run() is even cleaner.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20190306115532.23025-4-peterx@redhat.com
Message-Id: <20190306115532.23025-4-peterx@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
