aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-30scsi-generic: Fix HM-zoned device scanDmitry Fomichev2-4/+7
Several important steps during device scan depend on SCSI type of the device. For example, max_transfer property is only determined and assigned if the device has the type of TYPE_DISK. Host-managed ZBC disks retain most of the properties of regular SCSI drives, but they have their own SCSI device type, 0x14. This prevents the proper assignment of max_transfer property for HM-zoned devices in scsi-generic driver leading to I/O errors if the maximum i/o size calculated at the guest exceeds the host value. To fix this, define TYPE_ZBC to have the standard value from SCSI ZBC standard spec. Several scan steps that were previously done only for TYPE_DISK devices, are now performed for the SCSI devices having TYPE_ZBC too. Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200811225122.17342-3-dmitry.fomichev@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial-{isa, pci}: Alias QDEV properties from generic serial objectPhilippe Mathieu-Daudé2-3/+4
Instead of overwritting the properties of the generic 'state' object, alias them. Note we can now propagate the "baudbase" property. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-7-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Make 'wakeup' property booleanPhilippe Mathieu-Daudé3-2/+3
Make the "wakeup" property introduced in commit 9826fd597df ("suspend: make serial ports wakeup the guest") a boolean. As we want to reuse the generic serial properties in the ISA model (next commit), expose this property. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-6-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Rename I/O read/write trace eventsPhilippe Mathieu-Daudé2-4/+4
The serial_mm_read/write() handlers from the TYPE_SERIAL_MM device call the serial_ioport_read/write() handlers with shifted offset. When looking at the trace events from this MMIO device, it is confusing to read the accesses as I/O. Simplify using generic trace event names which make sense the various uses. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-5-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Remove old DEBUG_SERIAL commented codePhilippe Mathieu-Daudé1-11/+0
All useful DPRINTF() calls have been converted to trace events. Remove a pointless one in the IOEventHandler, and drop the DEBUG_SERIAL ifdef'ry. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200907015535.827885-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Replace commented DPRINTF() by trace eventPhilippe Mathieu-Daudé2-3/+2
Convert the old debug PRINTF() call to display the UART baudrate to a trace event. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200907015535.827885-3-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Assert serial_ioport_read/write offset fits 8 bytesPhilippe Mathieu-Daudé1-2/+2
The serial device has 8 registers, each 8-bit. The MemoryRegionOps 'serial_io_ops' is initialized with max_access_size=1, and all memory_region_init_io() callers correctly set the region size to 8 bytes: - serial_io_realize - serial_isa_realizefn - serial_pci_realize - multi_serial_pci_realize It is safe to assert the offset argument of serial_ioport_read() and serial_ioport_write() is always less than 8. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30configure: rename QEMU_GA_MSI_ENABLED to CONFIG_QGA_MSIStefan Hajnoczi3-3/+3
The QEMU_GA_MSI_ENABLED config-host.mak variable is emitted by ./configure. meson.build actually checks for CONFIG_QGA_MSI_ENABLED: summary_info += {'QGA MSI support': config_host.has_key('CONFIG_QGA_MSI_ENABLED')} Rename QEMU_GA_MSI_ENABLED to CONFIG_QGA_MSI for consistency with CONFIG_QGA_VSS. Also use 'y' instead of 'yes' for consistency. This fixes the feature summary printed by meson.build. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200914095231.621068-4-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Remove TYPE_SERIAL_IOPhilippe Mathieu-Daudé2-50/+0
TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, and it is not used anymore. Remove it. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907011538.818996-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/mips/mipssim: Use MMIO serial device on fake ISA I/OPhilippe Mathieu-Daudé1-2/+3
The 'mipssim' is not a real hardware, it is a simulator. There is an ISA MMIO space mapped at 0x1fd00000, however this is not a real ISA bus (no ISA IRQ). So can not use the TYPE_ISA_SERIAL device... Instead we have been using a plain MMIO device, but named it IO. TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, using regshift=0 and endianness=DEVICE_LITTLE_ENDIAN. Directly use the TYPE_SERIAL_MM device, enforcing the regshift/endianness values. 'regshift' default is already '0'. 'endianness' is meaningless for 8-bit accesses. This change breaks migration back compatibility, but this is not an issue for the mipssim machine. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907011538.818996-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30numa: remove fixup numa_state->num_nodes to MAX_NODESIgor Mammedov1-4/+0
current code permits only nodeids in [0..MAX_NODES) range due to nodeid check in parse_numa_node() if (nodenr >= MAX_NODES) { error_setg(errp, "Max number of NUMA nodes reached: %" so subj fixup is not reachable, drop it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200911084410.788171-4-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30doc: Cleanup "'-mem-path' fallback to RAM" deprecation textIgor Mammedov1-22/+21
it was actually removed in 5.0, commit 68a86dc15c (numa: remove deprecated -mem-path fallback to anonymous RAM) clean up forgotten remnants in docs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200911084410.788171-3-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30numa: drop support for '-numa node' (without memory specified)Igor Mammedov8-74/+14
it was deprecated since 4.1 commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes) Users of existing VMs, wishing to preserve the same RAM distribution, should configure it explicitly using ``-numa node,memdev`` options. Current RAM distribution can be retrieved using HMP command `info numa` and if separate memory devices (pc|nv-dimm) are present use `info memory-device` and subtract device memory from output of `info numa`. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200911084410.788171-2-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30acpi: i386: Move VMBus DSDT entry to SBJon Doron1-5/+7
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200715084326.678715-2-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30vhost-scsi: support inflight io trackLi Feng2-0/+29
Qemu will send GET_INFLIGHT_FD and SET_INFLIGH_FD to backend, and the backend setup the inflight memory to track the io. Change-Id: I805d6189996f7a1b44c65f0b12ef7473b1789510 Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20200909122021.1055174-1-fengli@smartx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30memory: Convert IOMMUMemoryRegionClass doc comment to kernel-docEduardo Habkost1-9/+41
Convert the existing documentation comments of IOMMUMemoryRegionClass to kernel-doc format so their contents will appear in the API reference at docs/devel/memory.html. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200908201129.3407568-1-ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30target/i386: support KVM_FEATURE_ASYNC_PF_INTVitaly Kuznetsov4-1/+32
Linux-5.8 introduced interrupt based mechanism for 'page ready' events delivery and disabled the old, #PF based one (see commit 2635b5c4a0e4 "KVM: x86: interrupt based APF 'page ready' event delivery"). Linux guest switches to using in in 5.9 (see commit b1d405751cd5 "KVM: x86: Switch KVM guest to using interrupts for page ready APF delivery"). The feature has a new KVM_FEATURE_ASYNC_PF_INT bit assigned and the interrupt vector is set in MSR_KVM_ASYNC_PF_INT MSR. Support this in QEMU. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200908141206.357450-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30MAINTAINERS: add Paolo Bonzini as RCU maintainerStefan Hajnoczi1-0/+8
The RCU code that Paolo maintains is missing a MAINTAINERS file entry. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200909090851.14458-1-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30configure: Do not intent to build WHPX on 32-bit hostPhilippe Mathieu-Daudé1-1/+4
Hyper-V is available on 64-bit versions of Windows, do not try to build its support on 32-bit versions. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200910054516.405777-1-f4bug@amsat.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-09-30WHPX: vmware cpuid leaf for tsc and apic frequencySunil Muthuswamy2-12/+87
Newer versions of WHPX provide the capability to query the tsc and apic frequency. Expose these through the vmware cpuid leaf. This patch doesnt support setting the tsc frequency; that will come as a separate fix. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Message-Id: <SN4PR2101MB08808DFDDC3F442BBEAADFF4C0710@SN4PR2101MB0880.namprd21.prod.outlook.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30meson: error out if qemu_suffix starts with /Marc-André Lureau1-0/+5
Since the variable is used for path concatenation, the result would ignore the prefix directory altogether. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30meson: fix MSI ruleMarc-André Lureau1-0/+1
The environment variables can't be passed through an env: argument yet (meson#2723), use 'env' as suggested in: https://github.com/mesonbuild/meson/issues/2723#issuecomment-348630957 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30ninjatool: rebuild multi-output targets if outputs are missingPaolo Bonzini1-0/+3
The "stamp file trick" used to group targets of a single multi-output rule prevents the user from deleting one such target in order to force its rebuild. Doing so will not touch the stamp file, and therefore only the dummy ":" command will be executed. With this patch, ninjatool writes rules that force-rebuild the stamp file if any of its outputs are missing. Rebuilding the missing target therefore causes the stamp file to be rebuilt too. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30meson: clean up build_by_defaultPaolo Bonzini6-9/+8
Build all executables by default except for the known-broken ones. This also allows running qemu-iotests without manually building socket_scm_helper. Reported-by: Max Reitz <mreitz@redhat.com> Tested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30tests: add missing genh dependencyClaudio Fontana1-2/+2
Fix high-parallelism builds by forcing all generated headers to be created before tests are compiled. Reported-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-30Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2-0/+17
acpi: unit test This just adds a unit test for previously merged functionality. A bit unusual, but we have a contribitor under a deadline, let's be nice and merge the unit test right away - does no harm. Hopefully this won't be a beginning of a trend ... Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 30 Sep 2020 09:13:13 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: tests/acpi: add DSDT.hpbrroot DSDT table blob to test global i440fx hotplug tests/acpi: unit test exercising global pci hotplug off for i440fx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-30tests/acpi: update expected data filesGerd Hoffmann5-5/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-13-kraxel@redhat.com
2020-09-30acpi/gpex: no reason to use a method for _CRSGerd Hoffmann1-3/+1
... just to return something which is constant anyway. - Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings - { - Return (ResourceTemplate () - { - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, [ ... ] + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, [ ... ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-12-kraxel@redhat.com
2020-09-30tests/acpi: add microvm pcie testGerd Hoffmann1-0/+15
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-11-kraxel@redhat.com
2020-09-30tests/acpi: factor out common microvm test setupGerd Hoffmann1-5/+10
... into new test_acpi_microvm_prepare helper Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-10-kraxel@redhat.com
2020-09-30tests/acpi: add empty tests/data/acpi/microvm/DSDT.pcie fileGerd Hoffmann1-0/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-9-kraxel@redhat.com
2020-09-30tests/acpi: allow updates for expected data filesGerd Hoffmann1-0/+5
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-8-kraxel@redhat.com
2020-09-30microvm/pcie: add 64bit mmio windowGerd Hoffmann1-0/+9
Place the 64bit window at the top of the physical address space, assign 25% of the avaiable address space. Force cpu.host-phys-bits=on for microvm machine typs so this actually works reliable. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-7-kraxel@redhat.com
2020-09-30microvm: add pcie supportGerd Hoffmann4-4/+111
Uses the existing gpex device which is also used as pcie host bridge on arm/aarch64. For now only a 32bit mmio window and no ioport support. It is disabled by default, use "-machine microvm,pcie=on" to enable. ACPI support must be enabled too because the bus is declared in the DSDT table. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-6-kraxel@redhat.com
2020-09-30microvm: add irq tableGerd Hoffmann1-0/+22
Add a comment with a table listing the IRQs, both legacy pc and microvm side-by-side. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-5-kraxel@redhat.com
2020-09-30arm: use acpi_dsdt_add_gpexGerd Hoffmann1-166/+9
Fill gpex config struct from memory map, then call the new acpi_dsdt_add_gpex helper function. No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-4-kraxel@redhat.com
2020-09-30acpi: add acpi_dsdt_add_gpexGerd Hoffmann3-0/+191
Add helper function to generate dsdt aml code for the gpex pci host. Largely copied from arm/virt. Configuration is handled by passing a config struct instead of looked up from memory map. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-3-kraxel@redhat.com
2020-09-30move MemMapEntryGerd Hoffmann3-10/+5
It is defined twice already. Move to a common header file to remove duplication and make it available to everybody. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-2-kraxel@redhat.com
2020-09-30tests/acpi: add DSDT.hpbrroot DSDT table blob to test global i440fx hotplugAni Sinha2-1/+0
This change adds a new DSDT golden master table blob to test disabling hotplug on both pci root bus and pci bridges. Also reverts the change in file bios-tables-test-allowed-diff.h to make sure its now empty so that future modifications to acpi tables can be caught. The following is the disassembled diff between DSDT.hpbridge and DSDT.hpbrroot: @@ -5,13 +5,13 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/pc/DSDT.hpbridge, Tue Sep 29 17:51:04 2020 + * Disassembly of tests/data/acpi/pc/DSDT.hpbrroot, Tue Sep 29 17:50:00 2020 * * Original Table Header: * Signature "DSDT" - * Length 0x0000139D (5021) + * Length 0x00000C07 (3079) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0x05 + * Checksum 0xAD * OEM ID "BOCHS " * OEM Table ID "BXPCDSDT" * OEM Revision 0x00000001 (1) @@ -247,38 +247,6 @@ } } - Scope (_SB.PCI0) - { - OperationRegion (PCST, SystemIO, 0xAE00, 0x08) - Field (PCST, DWordAcc, NoLock, WriteAsZeros) - { - PCIU, 32, - PCID, 32 - } - - OperationRegion (SEJ, SystemIO, 0xAE08, 0x04) - Field (SEJ, DWordAcc, NoLock, WriteAsZeros) - { - B0EJ, 32 - } - - OperationRegion (BNMR, SystemIO, 0xAE10, 0x04) - Field (BNMR, DWordAcc, NoLock, WriteAsZeros) - { - BNUM, 32 - } - - Mutex (BLCK, 0x00) - Method (PCEJ, 2, NotSerialized) - { - Acquire (BLCK, 0xFFFF) - BNUM = Arg0 - B0EJ = (One << Arg1) - Release (BLCK) - Return (Zero) - } - } - Scope (_SB) { Scope (PCI0) @@ -737,12 +705,6 @@ Scope (_GPE) { Name (_HID, "ACPI0006" /* GPE Block Device */) // _HID: Hardware ID - Method (_E01, 0, NotSerialized) // _Exx: Edge-Triggered GPE - { - Acquire (\_SB.PCI0.BLCK, 0xFFFF) - \_SB.PCI0.PCNT () - Release (\_SB.PCI0.BLCK) - } } Scope (\_SB.PCI0) @@ -813,22 +775,6 @@ ) }) } - - Device (PHPR) - { - Name (_HID, "PNP0A06" /* Generic Container Device */) // _HID: Hardware ID - Name (_UID, "PCI Hotplug resources") // _UID: Unique ID - Name (_STA, 0x0B) // _STA: Status - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - IO (Decode16, - 0xAE00, // Range Minimum - 0xAE00, // Range Maximum - 0x01, // Alignment - 0x14, // Length - ) - }) - } } Scope (\) @@ -878,7 +824,6 @@ { Scope (PCI0) { - Name (BSEL, Zero) Device (S00) { Name (_ADR, Zero) // _ADR: Address @@ -907,436 +852,6 @@ { Name (_ADR, 0x00030000) // _ADR: Address } - - Device (S20) - { - Name (_SUN, 0x04) // _SUN: Slot User Number - Name (_ADR, 0x00040000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S28) - { - Name (_SUN, 0x05) // _SUN: Slot User Number - Name (_ADR, 0x00050000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S30) - { - Name (_SUN, 0x06) // _SUN: Slot User Number - Name (_ADR, 0x00060000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S38) - { - Name (_SUN, 0x07) // _SUN: Slot User Number - Name (_ADR, 0x00070000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S40) - { - Name (_SUN, 0x08) // _SUN: Slot User Number - Name (_ADR, 0x00080000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S48) - { - Name (_SUN, 0x09) // _SUN: Slot User Number - Name (_ADR, 0x00090000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S50) - { - Name (_SUN, 0x0A) // _SUN: Slot User Number - Name (_ADR, 0x000A0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S58) - { - Name (_SUN, 0x0B) // _SUN: Slot User Number - Name (_ADR, 0x000B0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S60) - { - Name (_SUN, 0x0C) // _SUN: Slot User Number - Name (_ADR, 0x000C0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S68) - { - Name (_SUN, 0x0D) // _SUN: Slot User Number - Name (_ADR, 0x000D0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S70) - { - Name (_SUN, 0x0E) // _SUN: Slot User Number - Name (_ADR, 0x000E0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S78) - { - Name (_SUN, 0x0F) // _SUN: Slot User Number - Name (_ADR, 0x000F0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S80) - { - Name (_SUN, 0x10) // _SUN: Slot User Number - Name (_ADR, 0x00100000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S88) - { - Name (_SUN, 0x11) // _SUN: Slot User Number - Name (_ADR, 0x00110000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S90) - { - Name (_SUN, 0x12) // _SUN: Slot User Number - Name (_ADR, 0x00120000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S98) - { - Name (_SUN, 0x13) // _SUN: Slot User Number - Name (_ADR, 0x00130000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SA0) - { - Name (_SUN, 0x14) // _SUN: Slot User Number - Name (_ADR, 0x00140000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SA8) - { - Name (_SUN, 0x15) // _SUN: Slot User Number - Name (_ADR, 0x00150000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SB0) - { - Name (_SUN, 0x16) // _SUN: Slot User Number - Name (_ADR, 0x00160000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SB8) - { - Name (_SUN, 0x17) // _SUN: Slot User Number - Name (_ADR, 0x00170000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SC0) - { - Name (_SUN, 0x18) // _SUN: Slot User Number - Name (_ADR, 0x00180000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SC8) - { - Name (_SUN, 0x19) // _SUN: Slot User Number - Name (_ADR, 0x00190000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SD0) - { - Name (_SUN, 0x1A) // _SUN: Slot User Number - Name (_ADR, 0x001A0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SD8) - { - Name (_SUN, 0x1B) // _SUN: Slot User Number - Name (_ADR, 0x001B0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SE0) - { - Name (_SUN, 0x1C) // _SUN: Slot User Number - Name (_ADR, 0x001C0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SE8) - { - Name (_SUN, 0x1D) // _SUN: Slot User Number - Name (_ADR, 0x001D0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SF0) - { - Name (_SUN, 0x1E) // _SUN: Slot User Number - Name (_ADR, 0x001E0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SF8) - { - Name (_SUN, 0x1F) // _SUN: Slot User Number - Name (_ADR, 0x001F0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Method (DVNT, 2, NotSerialized) - { - If ((Arg0 & 0x10)) - { - Notify (S20, Arg1) - } - - If ((Arg0 & 0x20)) - { - Notify (S28, Arg1) - } - - If ((Arg0 & 0x40)) - { - Notify (S30, Arg1) - } - - If ((Arg0 & 0x80)) - { - Notify (S38, Arg1) - } - - If ((Arg0 & 0x0100)) - { - Notify (S40, Arg1) - } - - If ((Arg0 & 0x0200)) - { - Notify (S48, Arg1) - } - - If ((Arg0 & 0x0400)) - { - Notify (S50, Arg1) - } - - If ((Arg0 & 0x0800)) - { - Notify (S58, Arg1) - } - - If ((Arg0 & 0x1000)) - { - Notify (S60, Arg1) - } - - If ((Arg0 & 0x2000)) - { - Notify (S68, Arg1) - } - - If ((Arg0 & 0x4000)) - { - Notify (S70, Arg1) - } - - If ((Arg0 & 0x8000)) - { - Notify (S78, Arg1) - } - - If ((Arg0 & 0x00010000)) - { - Notify (S80, Arg1) - } - - If ((Arg0 & 0x00020000)) - { - Notify (S88, Arg1) - } - - If ((Arg0 & 0x00040000)) - { - Notify (S90, Arg1) - } - - If ((Arg0 & 0x00080000)) - { - Notify (S98, Arg1) - } - - If ((Arg0 & 0x00100000)) - { - Notify (SA0, Arg1) - } - - If ((Arg0 & 0x00200000)) - { - Notify (SA8, Arg1) - } - - If ((Arg0 & 0x00400000)) - { - Notify (SB0, Arg1) - } - - If ((Arg0 & 0x00800000)) - { - Notify (SB8, Arg1) - } - - If ((Arg0 & 0x01000000)) - { - Notify (SC0, Arg1) - } - - If ((Arg0 & 0x02000000)) - { - Notify (SC8, Arg1) - } - - If ((Arg0 & 0x04000000)) - { - Notify (SD0, Arg1) - } - - If ((Arg0 & 0x08000000)) - { - Notify (SD8, Arg1) - } - - If ((Arg0 & 0x10000000)) - { - Notify (SE0, Arg1) - } - - If ((Arg0 & 0x20000000)) - { - Notify (SE8, Arg1) - } - - If ((Arg0 & 0x40000000)) - { - Notify (SF0, Arg1) - } - - If ((Arg0 & 0x80000000)) - { - Notify (SF8, Arg1) - } - } - - Method (PCNT, 0, NotSerialized) - { - BNUM = Zero - DVNT (PCIU, One) - DVNT (PCID, 0x03) - } } } } Signed-off-by: Ani Sinha <ani@anisinha.ca> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200929123011.31836-3-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-30tests/acpi: unit test exercising global pci hotplug off for i440fxAni Sinha2-0/+18
This change adds a unit test to exercise the case when hotplug is disabled both for pci root bus and the pci bridges by passing the following two switches to qemu: -global PIIX4_PM.acpi-root-pci-hotplug=off -global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=off bios-tables-test-allowed-diff.h documents the fact that a new DSDT acpi gold master binary blob we need to be added to test this. We will do the actual addition in the next patch in the series. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200929123011.31836-2-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-09-29' into ↵Peter Maydell71-2444/+2108
staging QAPI patches patches for 2020-09-29 # gpg: Signature made Tue 29 Sep 2020 20:54:51 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2020-09-29: (29 commits) Remove texinfo dependency from docker and CI configs configure: Drop texinfo requirement Remove Texinfo related line from git.orderfile scripts/texi2pod: Delete unused script docs/devel/qapi-code-gen.txt: Update to new rST backend conventions scripts/qapi: Remove texinfo generation support tests/qapi-schema: Add test of the rST QAPI doc-comment output meson.build: Make manuals depend on source to Sphinx extensions meson.build: Move SPHINX_ARGS to top level meson.build file tests/qapi-schema: Convert doc-good.json to rST-style strong/emphasis qga/qapi-schema.json: Add some headings qapi: Use rST markup for literal blocks docs/interop: Convert qemu-qmp-ref to rST docs/interop: Convert qemu-ga-ref to rST docs/sphinx: Add new qapi-doc Sphinx extension qapi/machine.json: Escape a literal '*' in doc comment scripts/qapi/parser.py: improve doc comment indent handling scripts/qapi: Move doc-comment whitespace stripping to doc.py tests/qapi/doc-good.json: Prepare for qapi-doc Sphinx extension qapi/block.json: Add newline after "Example:" for block-latency-histogram-set ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-29Remove texinfo dependency from docker and CI configsPeter Maydell7-7/+0
We don't need texinfo to build the docs any more, so we can drop that dependency from our docker and other CI configs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-22-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29configure: Drop texinfo requirementPeter Maydell1-10/+2
We don't need the texinfo and pod2man programs to build our documentation any more, so remove them from configure's tests. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-21-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29Remove Texinfo related line from git.orderfilePeter Maydell1-1/+0
We don't use Texinfo any more; we can remove the references to the .texi source file from our git.orderfile. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-20-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29scripts/texi2pod: Delete unused scriptPeter Maydell2-537/+1
We no longer need the texi2pod script, so we can delete it, and the special-casing it had in the checkpatch script. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-19-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29docs/devel/qapi-code-gen.txt: Update to new rST backend conventionsPeter Maydell1-26/+49
Update the documentation of QAPI document comment syntax to match the new rST backend requirements. The principal changes are: * whitespace is now significant, and multiline definitions must have their second and subsequent lines indented to match the first line * general rST format markup is permitted, not just the small set of markup the old texinfo generator handled. For most things (notably bulleted and itemized lists) the old format was the same as rST is. * Specific things that might trip people up: - instead of *bold* and _italic_ rST has **bold** and *italic* - lists need a preceding and following blank line - a lone literal '*' will need to be backslash-escaped to avoid a rST syntax error * the old leading '|' for example (literal text) blocks is replaced by the standard rST '::' literal block. * we support arbitrary levels of sub- and sub-sub-heading, not just a main and sub-heading like the old texinfo generator * lists can now be nested Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-18-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message improved slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29scripts/qapi: Remove texinfo generation supportPeter Maydell6-634/+1
We no longer use the generated texinfo format documentation, so delete the code that generates it, and the test case for the generation. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-17-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29tests/qapi-schema: Add test of the rST QAPI doc-comment outputPeter Maydell3-0/+348
Add a test of the rST output from the QAPI doc-comment generator, similar to what we currently have that tests the Texinfo output. This is a bit more awkward with Sphinx, because the generated output is not 100% under our control the way the QAPI-to-Texinfo generator was. We can't observe the data we generate, only the Sphinx output. Two issues. One, the output can vary with the Sphinx version. In practice Sphinx's plaintext output generation has been identical between at least Sphinx 1.6 and 3.0, so we use that. (The HTML output has had changes across versions). We use an exact-match comparison check, with the understanding that perhaps changes in a future Sphinx version might require us to implement something more clever to cope with variation in the output. Two, the test can only protect us from changes in the data we generate that are visible in plain text. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-16-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29meson.build: Make manuals depend on source to Sphinx extensionsPeter Maydell2-0/+9
The automatic dependency handling for Sphinx manuals only makes the output depend on the input documentation files. This means that if you edit the Python source of an extension then the documentation won't be rebuilt. Create a list of all the source files for the extensions and add it to the dependencies for the manuals. This is similar to how we handle the qapi_gen_depends list. Because we don't try to identify which manuals are using which Sphinx extensions, a change to the source of one extension will always rebuild the entire manual set, not merely the manuals which have changed. This is acceptable because we don't change the extensions all that often. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-15-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Re rebuilding the enitre manual set being acceptable "because we don't change the extensions all that often": we also rebuild it when the QAPI generator code the qapidoc extension depends on changes. This will inconvenience QAPI developers. Can't be helped now.] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29meson.build: Move SPHINX_ARGS to top level meson.build filePeter Maydell2-8/+8
We're going to want to use SPHINX_ARGS in both docs/meson.build and tests/qapi-schema/meson.build. Move the definition up to the top level file so it is available to both subdirectories. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-14-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.1 at 2025-09-27 04:29:01 +0000