aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-06-22qapi/events: generate event enum in main moduleMarc-André Lureau1-2/+3
The event generator produces an enum, and put it in the last visited module. It fits better in the main module, since it's the set of all visited events, from all modules. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180321115211.17937-3-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-06-22qapi/visit: remove useless prefix argumentMarc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180321115211.17937-2-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-06-22nbd/server: Silence gcc false positiveEric Blake1-1/+2
The code has a while() loop that always initialized 'end', and the loop always executes at least once (as evidenced by the assert() just prior to the loop). But some versions of gcc still complain that 'end' is used uninitialized, so silence them. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180622125814.345274-1-eblake@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20180621' into ↵Peter Maydell7-23/+102
staging HMP pull 2018-06-21 Minor fixes and reenable preconfig # gpg: Signature made Thu 21 Jun 2018 17:43:09 BST # gpg: using RSA key 0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-hmp-20180621: hmp: Allow HMP in preconfig state again hmp: add exit_preconfig hmp: Add commands for preconfig qmp: Enable a few commands in preconfig state hmp: Restrict auto-complete in preconfig hmp: Allow help on preconfig commands hmp: Add flag for preconfig commands hmp-commands: use long for begin and length in dump-guest-memory monitor: report entirety of hmp command on error Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22Merge remote-tracking branch ↵Peter Maydell77-628/+8136
'remotes/stsquad/tags/pull-tcg-testing-revivial-210618-2' into staging Add check-tcg machinary This restores the ability to run TCG smoke tests by using our docker infrastructure to support cross building simple tests. It represents the first step to making better cross-architecture testing available straight from the source tree ;-) v2 - fix quoting of target_compiler - make docker.py Py3 safe - tweak .travis.yml recipe - don't probe docker when HAVE_USER_DOCKER not set # gpg: Signature made Thu 21 Jun 2018 07:23:45 BST # gpg: using RSA key FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-testing-revivial-210618-2: (57 commits) .travis.yml: add check-tcg test tests/docker/Makefile.include: only force SID to NOCACHE if old docker: docker.py adding age check command tests/Makefile: call sub-makes with SKIP_DOCKER_BUILD=1 docker: docker.py add check sub-command docker: docker.py don't conflate checksums for extra_files docker: docker.py use "version" to probe usage tests: add top-level make dependency for docker builds tests/tcg/i386: extend timeout for runcom test tests/tcg: override runners for broken tests tests/tcg: add run, diff, and skip helper macros tests/Makefile.include: add [build|clean|check]-tcg targets Makefile.target: add (clean-/build-)guest-tests targets tests/tcg/Makefile: update to be called from Makefile.target tests/tcg: enable building for PowerPC docker: move debian-powerpc-cross to sid based build tests/tcg: enable building for RISCV64 tests/tcg: enable building for mips64 tests/tcg: enable building for sparc64 tests/tcg: enable building for sh4 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-06-20-v2' ↵Peter Maydell9-144/+433
into staging nbd patches for 2018-06-20 Add experimental x-nbd-server-add-bitmap to expose a disabled bitmap over NBD, in preparation for a pull model incremental backup scheme. Also fix a corner case protocol issue with NBD_CMD_BLOCK_STATUS, and add new NBD_CMD_CACHE. - Eric Blake: tests: Simplify .gitignore - Eric Blake: nbd/server: Reject 0-length block status request - Vladimir Sementsov-Ogievskiy: 0/6 NBD export bitmaps - Vladimir Sementsov-Ogievskiy: nbd/server: introduce NBD_CMD_CACHE # gpg: Signature made Thu 21 Jun 2018 15:53:55 BST # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2018-06-20-v2: nbd/server: introduce NBD_CMD_CACHE docs/interop: add nbd.txt qapi: new qmp command nbd-server-add-bitmap nbd/server: implement dirty bitmap export nbd/server: add nbd_meta_empty_or_pattern helper nbd/server: refactor NBDExportMetaContexts nbd/server: fix trace nbd/server: Reject 0-length block status request tests: Simplify .gitignore Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-21Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20180615' into stagingPeter Maydell25-488/+1155
TCG patch queue: Workaround macos assembler lossage. Eliminate tb_lock. Fix TB code generation overflow. # gpg: Signature made Fri 15 Jun 2018 20:40:56 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20180615: tcg: Reduce max TB opcode count tcg: remove tb_lock translate-all: remove tb_lock mention from cpu_restore_state_from_tb cputlb: remove tb_lock from tlb_flush functions translate-all: protect TB jumps with a per-destination-TB lock translate-all: discard TB when tb_link_page returns an existing matching TB translate-all: introduce assert_no_pages_locked translate-all: add page_locked assertions translate-all: use per-page locking in !user-mode translate-all: move tb_invalidate_phys_page_range up in the file translate-all: work page-by-page in tb_invalidate_phys_range_1 translate-all: remove hole in PageDesc translate-all: make l1_map lockless translate-all: iterate over TBs in a page with PAGE_FOR_EACH_TB tcg: move tb_ctx.tb_phys_invalidate_count to tcg_ctx tcg: track TBs with per-region BST's qht: return existing entry when qht_insert fails qht: require a default comparison function tcg/i386: Use byte form of xgetbv instruction Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-21nbd/server: introduce NBD_CMD_CACHEVladimir Sementsov-Ogievskiy3-5/+11
Handle nbd CACHE command. Just do read, without sending read data back. Cache mechanism should be done by exported node driver chain. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180413143156.11409-1-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix two missing case labels in switch statements] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21docs/interop: add nbd.txtVladimir Sementsov-Ogievskiy2-0/+39
Describe new metadata namespace: "qemu". Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180609151758.17343-7-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21qapi: new qmp command nbd-server-add-bitmapVladimir Sementsov-Ogievskiy2-0/+46
For now, the actual command ix x-nbd-server-add-bitmap, reflecting the fact that we are still working on libvirt code that proves the command works as needed, and also the fact that we may remove bitmap-export-name (and just require that the exported name be the bitmap name). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180609151758.17343-6-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: make the command experimental by adding x- prefix] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21nbd/server: implement dirty bitmap exportVladimir Sementsov-Ogievskiy3-25/+262
Handle a new NBD meta namespace: "qemu", and corresponding queries: "qemu:dirty-bitmap:<export bitmap name>". With the new metadata context negotiated, BLOCK_STATUS query will reply with dirty-bitmap data, converted to extents. The new public function nbd_export_bitmap selects which bitmap to export. For now, only one bitmap may be exported. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180609151758.17343-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: wording tweaks, minor cleanups, additional tracing] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21nbd/server: add nbd_meta_empty_or_pattern helperVladimir Sementsov-Ogievskiy1-27/+62
Add nbd_meta_pattern() and nbd_meta_empty_or_pattern() helpers for metadata query parsing. nbd_meta_pattern() will be reused for the "qemu" namespace in following patches. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180609151758.17343-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21nbd/server: refactor NBDExportMetaContextsVladimir Sementsov-Ogievskiy1-12/+11
Use NBDExport pointer instead of just export name: there is no need to store a duplicated name in the struct; moreover, NBDExport will be used further. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180609151758.17343-3-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: commit message grammar tweak] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21nbd/server: fix traceVladimir Sementsov-Ogievskiy1-4/+10
Return code = 1 doesn't mean that we parsed base:allocation. Use correct traces in both -parsed and -skipped cases. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180609151758.17343-2-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: comment tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21nbd/server: Reject 0-length block status requestEric Blake1-0/+4
The NBD spec says that behavior is unspecified if the client requests 0 length for block status; but since the structured reply is documenting as returning a non-zero length, it's easier to just diagnose this with an EINVAL error than to figure out what to return. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180621124937.166549-1-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2018-06-21tests: Simplify .gitignoreEric Blake1-88/+5
Commit 0bcc8e5b was yet another instance of 'git status' reporting dirty files after an in-tree build, thanks to the new binary tests/check-block-qdict. Instead of piecemeal exemptions of each new binary as they are added, let's use git's negative globbing feature to exempt ALL files that have a 'test-' or 'check-' prefix, except for the ones ending in '.c' or '.sh'. We still have a couple of generated files that then need (re-)exclusion, but the overall list is a LOT shorter, and less prone to needing future edits. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180619203918.65450-1-eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-21hmp: Allow HMP in preconfig state againDr. David Alan Gilbert1-6/+0
Now we can cope with preconfig in HMP, reenable by reverting commit 71dc578e116599ea73c8a2a4e693134702ec0e83. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-8-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp: add exit_preconfigDr. David Alan Gilbert3-0/+28
Add the exit_preconfig command to return to normality. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-7-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp: Add commands for preconfigDr. David Alan Gilbert2-0/+13
Allow a bunch of the info commands to be used in preconfig. version, chardev, name, uuid,memdev, iothreads Were enabled in QMP in the previous patch from Igor status, hotpluggable_cpus Was enabled in the original allow-preconfig series history is HMP specific qom-tree Don't have a QMP equivalent Also enable the qom commands qom-list and qom-set. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180620153947.30834-6-dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Dropped info numa as per Igor's 2018-06-21 review
2018-06-21qmp: Enable a few commands in preconfig stateIgor Mammedov2-11/+19
Commands query-chardev, query-version, query-name, query-uuid, query-iothreads, query-memdev are informational and do not depend on the machine being initialized. Make them available in preconfig runstate to make the latter a little bit more useful. The generic qom commands don't depend on the machine being initialized either; so enabled qom-list, qom-get, qom-set, qom-list-types, qom-list-properties. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180620153947.30834-5-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp: Restrict auto-complete in preconfigDr. David Alan Gilbert1-2/+7
Don't show the commands that aren't available. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-4-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp: Allow help on preconfig commandsDr. David Alan Gilbert2-1/+8
Allow the 'help' command in preconfig state but make it only list the preconfig commands. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-3-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp: Add flag for preconfig commandsDr. David Alan Gilbert1-0/+20
Add a flag to command definitions to allow them to be used in preconfig and check it. If users try to use commands that aren't available, tell them to use the exit_preconfig comand we're adding in a few patches. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-2-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp-commands: use long for begin and length in dump-guest-memorySuraj Jitindar Singh1-1/+1
The dump-guest-memory command is used to dump an area of guest memory to a file, the piece of memory is specified by a begin address and a length. These parameters are specified as ints and thus have a maximum value of 4GB. This means you can't dump the guest memory past the first 4GB and instead get: (qemu) dump-guest-memory tmp 0x100000000 0x100000000 'dump-guest-memory' has failed: integer is for 32-bit values Try "help dump-guest-memory" for more information This limitation is imposed in monitor_parse_arguments() since they are both ints. hmp_dump_guest_memory() uses 64 bit quantities to store both the begin and length values. Thus specify begin and length as long so that the entire guest memory space can be dumped. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20180620003202.10546-1-sjitindarsingh@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21monitor: report entirety of hmp command on errorCollin Walling1-2/+6
When a user incorrectly provides an hmp command, an error response will be printed that prompts the user to try "help <command name>". However, when the command contains multiple parts e.g. "info uuid xyz", only the last whitespace delimited string will be reported (in this example "info" will be dropped and the message will read "Try "help uuid" for more information", which is incorrect). Let's correct this by capturing the entirety of the command from the command line -- excluding any extraneous characters. Reported-by: Mikhail Fokin <fokin@de.ibm.com> Signed-off-by: Collin Walling <walling@linux.ibm.com> Message-Id: <ee680f5e-ac9a-479d-f65e-9f8ae9cfe5d4@linux.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-20.travis.yml: add check-tcg testAlex Bennée1-0/+8
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/docker/Makefile.include: only force SID to NOCACHE if oldAlex Bennée1-0/+6
Now we can check the age of a docker image we can be a little more intelligent about re-building Sid images and only force NOCACHE if it is "old". Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20docker: docker.py adding age check commandAlex Bennée1-10/+36
This is useful for querying if an image is too old. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/Makefile: call sub-makes with SKIP_DOCKER_BUILD=1Alex Bennée2-3/+18
As we now ensure all the images we are going to use are built in the top level make file lets not over complicate things by running the full script again. We do run the check script just in case someone deletes the docker image while we are running. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20docker: docker.py add check sub-commandAlex Bennée1-1/+37
This command allows you to check if we need to re-build a docker image. If the image isn't in the repository or the checksums don't match then we return false and some text (for processing in makefiles). Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20docker: docker.py don't conflate checksums for extra_filesAlex Bennée1-3/+5
This just gets confusing especially as the helper function doesn't even take into account any extra files (or the executable). Currently the actual check just ignores them and also passes the result through _dockerfile_preprocess so we fix that too. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20docker: docker.py use "version" to probe usageAlex Bennée1-1/+3
The "images" command is a fairly heavyweight command to run as it involves searching the whole docker file-system inventory. On a machine with a lot of images this makes start-up fairly expensive. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20tests: add top-level make dependency for docker buildsAlex Bennée2-0/+39
One problem with satisfying your docker dependencies in a sub-make it you might end up trying to satisfy the dependency multiple times. This is especially a problem with debian-sid based cross compilers and CI setups. We solve this by doing a docker build pass at the top level before any sub-makes are called. We still need to satisfy dependencies in the Makefile.target call so people can run tests from individual target directories. We introduce a new Makefile.probe which gets called for each PROBE_TARGET and allows us to build up the list. It does require multiply including config-target.mak which shouldn't cause any issues as it shouldn't define anything that clashes with config-host.mak. However we undefine a few key variables each time around. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20tests/tcg/i386: extend timeout for runcom testAlex Bennée1-0/+1
The Travis hardware can be a little slow and the runcom test is fairly heavy in calculating pi. Lets double the timeout so we don't trip up during CI by mistake. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20tests/tcg: override runners for broken testsAlex Bennée2-1/+9
To get a clean run of check-tcg these tests are currently skipped: - hello-mips for mips - linux-test for sparc Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: add run, diff, and skip helper macrosAlex Bennée5-19/+20
As we aren't using the default runners for all the test cases it is easy to miss out things like timeouts. To help with this we add some helpers and use them so we only need to make core changes in one place. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/Makefile.include: add [build|clean|check]-tcg targetsAlex Bennée1-1/+25
This will ensure all linux-user targets build their guest test programs and ensure check-tcg will run the respective tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20Makefile.target: add (clean-/build-)guest-tests targetsAlex Bennée3-0/+94
Now all the build infrastructure is in place we can build tests for each guest that we support. That support mainly depends on having cross compilers installed or docker setup. To keep all the logic for that together we put the rules in tests/tcg/Makefile.include and include it from the main Makefile.target. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg/Makefile: update to be called from Makefile.targetAlex Bennée2-107/+82
This make is now invoked from each individual target make with the appropriate CC and EXTRA_CFLAGS set for each guest. It then includes additional Makefile.targets from: - tests/tcg/multiarch (always) - tests/tcg/$(TARGET_BASE_ARCH) (if available) - tests/tcg/$(TARGET_NAME) The order is important as the later Makefile's may want to suppress TESTS from its base arch profile. Each included Makefile.target is responsible for adding TESTS as well as defining any special build instructions for individual tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for PowerPCAlex Bennée3-2/+19
Now we have restored debian-image-powerpc-cross using Debian SID compilers we can build for 32 bit powerpc. Although PPC32 supports a range of pages sizes currently only 4k works so the others are commented out for now. We can also merge the ppc64 support under the base architecture directory to avoid too much proliferation of directories. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20docker: move debian-powerpc-cross to sid based buildAlex Bennée4-85/+7
The original Jessie based cross builder hasn't worked for a while. The state of the libraries is still perilous for cross-building QEMU but we can use it for building TCG tests. The debian-apt-fake.sh script can also be dropped as it is no longer used. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for RISCV64Alex Bennée3-0/+23
As before, using Debian SID compilers. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for mips64Alex Bennée3-0/+16
As before, using Debian SID compilers. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for sparc64Alex Bennée4-0/+21
As before, using Debian SID compilers. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for sh4Alex Bennée4-0/+24
As before, using Debian SID compilers. While the compiler can be coerced into generating big-endian code it seems the linker can't deal with it so we only enable the building for little endian SH4. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for m68kAlex Bennée4-0/+22
As before, using Debian SID compilers. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for HPPAAlex Bennée4-0/+21
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg/alpha: add Alpha specific testsAlex Bennée6-61/+17
These tests did use their own crt.o stub however that is a little stone age so we drop crt.S and just statically link to the cross compilers libraries. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for AlphaAlex Bennée5-0/+59
We can't use our normal Debian based compilers as Alpha isn't an officially supported architecture. However it is available as a port and fortunately cross compilers for all these targets are included in Debian Sid, the perpetual rolling/unstable/testing version of Debian. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: enable building for ppc64Alex Bennée1-0/+2
Currently this just enables building the multiarch tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.1 at 2025-02-19 16:41:31 +0000