aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-05Refactor DEC 21154 PCI bridgeBlue Swirl4-107/+85
It's currently not used by PPC machines. Refactor so that also Sparc64 machines can use it. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-05usb-linux.c: remove write-only variablePaolo Bonzini1-2/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-05vnc.c: remove dead codePaolo Bonzini1-3/+0
to= is handled in qemu-sockets.c inet_listen. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-05remove two dead assignments in target-i386/translate.cPaolo Bonzini1-2/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-05exec.c: dead assignmentsPaolo Bonzini1-4/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-05fix undefined shifts by >32Paolo Bonzini1-2/+2
This one is for 0.12 too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-03qdev: Add rudimentary help for property valueMarkus Armbruster1-1/+1
This provides the same information as reverted commit 2ba6edf0. Not much, just better than nothing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03qdev: update help on -deviceMarkus Armbruster1-13/+10
While there, use "property" rather than "option", for consistency with -global. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03qdev: Add help for device propertiesMarkus Armbruster1-1/+14
Option "-device DRIVER,?" and monitor command "device_add DRIVER,?" print the supported properties instead of creating a device. The former also terminates the program. This is commit 2ba6edf0 (just reverted) done right. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03Revert "qdev: Add help for device properties"Markus Armbruster1-13/+2
This reverts commit 2ba6edf0dd740166632df80caa85992b20791a68. The commit has two issues: * When it runs from the monitor, e.g. "device_add e1000,?", it prints to stderr instead of the monitor. * Help looks to callers just like failed device creation. This makes main() exit unsuccessfully on "-device e1000,?". We need to do this differently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03Revert "qdev: Add help for property value"Markus Armbruster1-7/+2
This reverts commit 922910ce42d15bdb7c2347436b1b5798b5401de4. The commit has four issues: * When it runs from the monitor, e.g. "device_add e1000,mac=?", it prints to stderr instead of the monitor. * Help looks to callers just like failed device creation. This makes main() exit unsuccessfully on "-device e1000,mac=?". * It has an undocumented side effect on -global: "-global e1000.mac=?" prints help, but only when we actually add an e1000 device. * It does not work for properties that accept the value "?". We need to do this differently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03qdev: Fix exit code for -device ?Markus Armbruster3-9/+28
Help was shoehorned into device creation, qdev_device_add(). Since help doesn't create a device, it returns NULL, which looks to callers just like failed device creation. Monitor handler do_device_add() doesn't care, but main() exits unsuccessfully. Move help out of device creation, into new qdev_device_help(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03qemu-option: Make qemu_opts_foreach() accumulate return valuesMarkus Armbruster1-1/+1
Return the bitwise inclusive or of all return values instead of the last call's value. This lets you find out whether any of the calls returned a non-zero value. No functional change, as existing users either don't care for the value, or pass non-zero abort_on_failure, which breaks the loop on the first non-zero return value. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03Revert "QError: New QERR_INVALID_CPU_INDEX"Markus Armbruster2-7/+0
This reverts commit 64a34bb14c0e358a6b2f14805e59ef25bf62d6d5. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Use QERR_INVALID_PARAMETER instead of QERR_INVALID_CPU_INDEXMarkus Armbruster1-1/+1
This changes the error message from "Invalid CPU index" to "Invalid parameter index" in the human monitor. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: convert do_migrate_set_downtime() to QObjectMarkus Armbruster3-3/+6
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Use argument type 'T' for migrate_set_downtimeMarkus Armbruster2-14/+3
Before, it used type 's', which strips quotes and interprets escapes, and is quite inappropriate for QMP. Negative arguments are no flushed to zero. Before, they were cast to uint32_t, which wrecked the sign. Ridiculously large arguments including infinities are now rejected. Before, they were interpreted as zero. Same for NaN. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: New argument type 'T'Markus Armbruster1-1/+16
This is a double value with optional suffixes ms, us, ns. We'll need this to get migrate_set_downtime() QMP-ready. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: convert do_migrate_set_speed() to QObjectMarkus Armbruster3-3/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Use argument type 'b' for migrate_set_speedMarkus Armbruster2-16/+4
Before, it used type 's', which strips quotes and interprets escapes, and is quite inappropriate for QMP. Negative arguments are no flushed to zero. Before, they were cast to uint32_t, which wrecked the sign. Ridiculously large arguments including infinities are now rejected. Before, they were interpreted as zero. Same for NaN. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: New argument type 'b'Markus Armbruster1-0/+64
This is a double value with optional suffixes G, g, M, m, K, k. We'll need this to get migrate_set_speed() QMP-ready. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03QDict: New qdict_get_double()Markus Armbruster3-1/+26
Helper function just like qdict_get_int(), just for QFloat/double. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Document argument type 'M'Markus Armbruster1-0/+2
Was forgotten in commit b6e098d7. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03seabios: use correct submodule hashAnthony Liguori1-0/+0
Commit 392ecf543dd2b219828374850d833296a55567ea introduced an accidental change to the roms/seabios submodule. This commit partially reverts that commit to ensure the seabios module points to the right commit. Reported-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-31bsd/darwin-user: mmap_frag() users only check for -1 errorBlue Swirl2-2/+2
See also ee636500d6eab44b83f09cb730b67226b70423b1. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-31cris: Prettify register dumps.Edgar E. Iglesias1-2/+2
Use friendly names for registers in the dumps. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-01-31sparc32 don't mark page dirty when failingArtyom Tarasenko1-5/+6
if the access check fails, the page can not be modified and shouldn't be marked dirty. The patch fixes the "hsfs_putpage: dirty HSFS page" error in Solaris guests. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-30sparc64: implement basic IOMMU/interrupt handlingBlue Swirl1-22/+142
Also add reset control. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-29Sparc64: byte swap IO port accessBlue Swirl1-4/+4
This requires an updated OpenBIOS image. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-29virtio-blk: Fix error cases which ignored rerror/werrorKevin Wolf1-2/+2
If an I/O request fails right away instead of getting an error only in the callback, we still need to consider rerror/werror. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-29virtio-blk: Fix restart after read errorKevin Wolf1-2/+9
Current code assumes that only write requests are ever going to be restarted. This is wrong since rerror=stop exists. Instead of directly starting writes, use the same request processing as used for new requests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-29virtio_blk: Factor virtio_blk_handle_request outKevin Wolf1-32/+46
We need a function that handles a single request. Create one by splitting out code from virtio_blk_handle_output. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-29cirrus: Properly re-register cirrus_linear_io_addr on vram unmapJan Kiszka1-2/+4
This fixes CONFIG_FB_CIRRUS for Linux guests and probably much more: When switching away from linearly mapped vram, we also have to restore the I/O handlers for the LFB. This regression was once introduced by commit 2bec46dc97. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-29virtio-serial-bus: Fix bus initialisation and allow for bus identificationAmit Shah1-2/+1
This commit enables one to use multiple virtio-serial devices and to assign ports to arbitrary devices like this: -device virtio-serial,id=foo -device virtio-serial,id=bar \ -device virtserialport,bus=foo.0,name=foo \ -device virtserialport,bus=bar.0,name=bar Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-28softmmu: Dont clobber retaddr in slow_ldx().Edgar E. Iglesias1-1/+0
When splitting up unaligned IO accesses, ld calls slow_ld which was clobbering retaddr. AFAIK the problem only shows up when running emulations with -icount that may abort TB execution on IO accesses. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-01-28Solaris: test for presence of commands with has()Loïc Minier1-5/+7
Signed-off-by: Loïc Minier <lool@dooz.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28Add and use has() and path_of() funcsLoïc Minier1-9/+43
Add has() and path_of() funcs and use them across configure; has() will test whether a command or builtin is available; path_of() will search the PATH for executables and return the full pathname if found. Signed-off-by: Loïc Minier <lool@dooz.org Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28Check for sdl-config before calling itLoïc Minier1-1/+6
Check whether sdl-config is available before calling it, otherwise ./configure triggers a warning: ./configure: 957: sdl-config: not found If neither the .pc file not sdl-config are present, disable SDL support. Signed-off-by: Loïc Minier <lool@dooz.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28Monitor: Fix command execution regressionLuiz Capitulino1-1/+5
Function is_async_return() added by commit 940cc30d0d4 assumes that 'data', which is returned by handlers, is always a QDict. This is not true, as QLists can also be returned, in this case we'll get a segfault. Fix that by checking if 'data' is a QDict. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-27sparc64: reimplement tick timers v4Igor V. Kovalenko3-46/+202
sparc64 timer has tick counter which can be set and read, and tick compare value used as deadline to fire timer interrupt. The timer is not used as periodic timer, instead deadline is set each time new timer interrupt is needed. v3 -> v4: - coding style v2 -> v3: - added missing timer debug output macro - CPUTimer struct and typedef moved to cpu.h - change CPU_SAVE_VERSION to 6, older save formats not supported v1 -> v2: - new conversion helpers cpu_to_timer_ticks and timer_to_cpu_ticks - save offset from clock source to implement cpu_tick_set_count - renamed struct sun4u_timer to CPUTimer - load and save cpu timers v0 -> v1: - coding style Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-27sparc64: correct write extra bits to cwpIgor V. Kovalenko1-1/+1
- correctly fit to cwp if provided window number is out of range Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-27Fix BSD buildBlue Swirl1-0/+3
<sys/wait.h> must be included in order to use WIF* macros. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-27Fix regression in option parsingAnthony Liguori1-0/+1
Commit ec229bbe7 broke invocation without a specific -hda. IOW, qemu foo.img. The lack of an optind update caused an infinite loop. Reported-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-27pflash: Buffer block writesEdgar E. Iglesias1-3/+9
Buffer block writes to avoid flushing every word access onto backing storage device. This significantly speeds up flash emulation for flashes connected through an 8 or 16-bit bus combined with backing storage (-pflash). Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-01-26virtio: Add memory statistics reporting to the balloon driverAdam Litke6-52/+219
When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26New API for asynchronous monitor commandsAdam Litke2-4/+111
Qemu has a number of commands that can operate asynchronously (savevm, migrate, etc) and it will be getting more. For these commands, the user monitor needs to be suspended, but QMP monitors could continue to to accept other commands. This patch introduces a new command API that isolates the details of handling different monitor types from the actual command execution. A monitor command can use this API by implementing the mhandler.cmd_async handler (or info_async if appropriate). This function is responsible for submitting the command and does not return any data although it may raise errors. When the command completes, the QMPCompletion callback should be invoked with its opaque data and the command result. The process for submitting and completing an asynchronous command is different for QMP and user monitors. A user monitor must be suspended at submit time and resumed at completion time. The user_print() function must be passed to the QMPCompletion callback so the result can be displayed properly. QMP monitors are simpler. No submit time setup is required. When the command completes, monitor_protocol_emitter() writes the result in JSON format. This API can also be used to implement synchronous commands. In this case, the cmd_async handler should immediately call the QMPCompletion callback. It is my hope that this new interface will work for all commands, leading to a drastically simplified monitor.c once all commands are ported. Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26block: avoid creating too large iovecs in multiwrite_mergeChristoph Hellwig2-0/+8
If we go over the maximum number of iovecs support by syscall we get back EINVAL from the kernel which translate to I/O errors for the guest. Add a MAX_IOV defintion for platforms that don't have it. For now we use the same 1024 define that's used on Linux and various other platforms, but until the windows block backend implements some kind of vectored I/O it doesn't matter. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26vnc_refresh: calling vnc_update_client might free vsStefano Stabellini1-2/+4
Hi all, this patch fixes another bug in vnc_refresh: calling vnc_update_client might cause vs to be free()ed, in this case we cannot access vs->next right after to examine the next item on the list. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26block/raw-posix: Abort on pread beyond end of non-growable fileKevin Wolf1-1/+5
This shouldn't happen under any normal circumstances. However, it looks like it's possible to achieve this with corrupted images. Without this patch raw_pread is hanging in an endless loop in such cases. The patch is not affecting growable files, for which such reads happen in normal use cases. raw_pread_aligned already handles these cases and won't return zero in the first place. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26win32: pair qemu_memalign() with qemu_vfree()Herve Poussineau5-5/+5
Win32 suffers from a very big memory leak when dealing with SCSI devices. Each read/write request allocates memory with qemu_memalign (ie VirtualAlloc) but frees it with qemu_free (ie free). Pair all qemu_memalign() calls with qemu_vfree() to prevent such leaks. Signed-off-by: Herve Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-10-17 23:57:35 +0000