aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-09-10tests/docker: move our powerpc cross compile to BusterAlex Bennée2-6/+4
Now Buster is released we can stop relying on the movable feast that is Sid for our cross-compiler for building tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-10tests/docker: move our arm64 cross compile to BusterAlex Bennée4-22/+5
Now Buster is released we can unify our cross build images for both QEMU and tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-10tests/docker: add Buster to DOCKER_PARTIAL_IMAGESAlex Bennée1-1/+1
We need to add additional packages to the base images to be able to build QEMU so lets avoid building with it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-10tests/docker: set DEF_TARGET_LIST for some containersAlex Bennée7-0/+7
You can assume the failures most people are interested in are the cross-compile failures that are specific to the cross compile target. Set DEF_TARGET_LIST based on what we use for shippable, the user can always override by calling with TARGET_LIST set. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10tests/docker: move DEF_TARGET_LIST setting to common.rcAlex Bennée4-3/+4
We might as well not repeat ourselves. At the same time allow it to be overridden which we will use later from docker targets. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-10tests/tcg: add .gitignore for in source buildsAlex Bennée1-0/+5
This hides the new build artefacts from the re-organised TCG tests when you are doing an in-source build. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10tests/tcg: move configuration to a sub-shell scriptPaolo Bonzini22-292/+288
Avoid the repeated inclusions of config-target.mak, which have risks of namespace pollution, and instead build minimal configuration files in a configuration script. The same configuration files can also be included in Makefile and Makefile.qemu [AJB 10/09/19] In the original PR this had inadvertently enabled tests for ppc64abi32. However as the rest of the multiarch tests work rather than disabling the otherwise correctly functioning build I've just skipped the failing linux-test test. For some reason I can't debug it with TCG so I'm leaving that to the PPC maintainers to look at. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190807143523.15917-4-pbonzini@redhat.com> [AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Richard Henderson <rth@twiddle.net>
2019-09-10tests/tcg: cleanup Makefile inclusionsPaolo Bonzini11-72/+100
Rename Makefile.probe to Makefile.prereqs and make it actually define rules for the tests. Rename Makefile to Makefile.target, since it is not a toplevel makefile. Rename Makefile.include to Makefile.qemu and disentangle it from the QEMU Makefile.target, so that it is invoked recursively by tests/Makefile.include. Tests are now placed in tests/tcg/$(TARGET). Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except x86_64 and aarch64. Fix x86 tests by using -cpu max and, while at it, standardize on QEMU_OPTS for aarch64 tests too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190807143523.15917-3-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10tests/tcg: use EXTRA_CFLAGS everywherePaolo Bonzini6-10/+10
For i386 specifically, this allows using the host GCC to compile the i386 tests. But, it should really be done for all targets, unless we want to pass $(EXTRA_CFLAGS) directly as part of $(CC). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190807143523.15917-2-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10tests/docker: fix final missing .encode when parsing solibsAlex Bennée1-1/+1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10tests/docker: handle missing encoding keyword for subprocess.check_outputAlex Bennée1-4/+10
This was only added in Python 3.6 and not all the build hosts have that recent a python3. However we still need to ensure everything is returns as a unicode string so checks higher up the call chain don't barf. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> fixup! tests/docker: handle missing encoding keyword for subprocess.check_output
2019-09-10tests/docker: fix "cc" command to work with podmanAlex Bennée2-14/+14
Podman requires a little bit of additional magic to the uid mapping which was already done for the normal RunCommand. We simplify the logic by pushing it directly into the Docker::run method to avoid instantiating an extra Docker() object and ensure the CC command always runs as the current user. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10tests/docker: Use --userns=keep-id for podmanJohn Snow1-3/+1
The workaround that attempts to accomplish the same result as --userns=keep-id does not appear to work well with UIDs much above 1000 (like mine, which is above 20000.) Since we have official support for this "trick" now, use the supported method. Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20190904232451.26466-1-jsnow@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10configure: clean-up container cross compile detectAlex Bennée2-8/+9
The introduction of podman support inadvertently broke configure's detect of the container support as the configure probe didn't specify an engine type. To fix this in docker.py: - only (re)set USE_ENGINE if --engine is specified - enhance the output so docker is no longer just yes In the configure script we can at least start cleaning up the detecting and naming of variables. To avoid too much churn the conversion of the various make DOCKER_foo variables has been left for future clean-ups. Fixes: 9459f754134b Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: David Hildenbrand <david@redhat.com>
2019-09-10hw/misc: Mark most objects as "common" code to speed up compilation a litte bitThomas Huth1-45/+45
Most of the code in hw/misc/ does not directly depend on CPU-specific code. Mark it as "common" so that the code can be shared between e.g. qemu-system-arm and qemu-system-aarch64, or between the various mips flavours, instead of recompiling it for each and every target again and again. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190902162638.28142-1-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-09Merge remote-tracking branch 'remotes/huth-gitlab/tags/m68k-pull-2019-09-07' ↵Peter Maydell14-7/+1641
into staging Add the m68k next-cube machine # gpg: Signature made Sat 07 Sep 2019 16:32:53 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "huth@tuxfamily.org" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/m68k-pull-2019-09-07: .travis.yml: Let the avocado job run the NeXTcube tests tests/acceptance: Add test of NeXTcube framebuffer using OCR m68k: Add an entry for the NeXTcube machine to the MAINTAINERS file m68k: Add serial controller to the NeXTcube machine escc: introduce a selector for the register bit m68k: Add NeXTcube machine m68k: Add NeXTcube keyboard device m68k: Add NeXTcube framebuffer device emulation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-07.travis.yml: Let the avocado job run the NeXTcube testsPhilippe Mathieu-Daudé1-1/+6
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190813134921.30602-3-philmd@redhat.com> [huth: Rebased patch to master branch] Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07tests/acceptance: Add test of NeXTcube framebuffer using OCRPhilippe Mathieu-Daudé1-0/+121
Add a test of the NeXTcube framebuffer using the Tesseract OCR engine on a screenshot of the framebuffer device. The test is very quick: $ avocado --show=app,console run tests/acceptance/machine_m68k_nextcube.py JOB ID : 78844a92424cc495bd068c3874d542d1e20f24bc JOB LOG : /home/phil/avocado/job-results/job-2019-08-13T13.16-78844a9/job.log (1/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_size: PASS (2.16 s) (2/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_ocr_with_tesseract_v3: - ue r pun Honl'flx ; 5‘ 55‘ avg ncaaaaa 25 MHZ, memary jag m Backplane slat «a Ethernet address a a r a r3 2 Memgry sackets aea canflqured far 16MB Darlly page made stMs but have 16MB page made stMs )nstalled Memgry sackets a and 1 canflqured far 16MB Darlly page made stMs but have 16MB page made stMs )nstalled [...] Yestlnq the rpu, 5:: system test raneg Errar egge 51 Egg: cammand Default pggc devlce nut fauna NEXY>I PASS (2.64 s) (3/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_ocr_with_tesseract_v4: SKIP: tesseract v4 OCR tool not available RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 1 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 5.35 s Documentation on how to install tesseract: https://github.com/tesseract-ocr/tesseract/wiki#installation Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190813134921.30602-2-philmd@redhat.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07m68k: Add an entry for the NeXTcube machine to the MAINTAINERS fileThomas Huth1-0/+7
I don't have much clue about the NeXT hardware, but at least I know now the source files a little bit, so I volunteer to pick up patches and send PULL requests for them until someone else with more knowledge steps up to do this job instead. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-7-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07m68k: Add serial controller to the NeXTcube machineThomas Huth3-2/+52
The NeXTcube uses a normal 8530 serial controller, so we can simply use our normal "escc" device here. While we're at it, also add a boot-serial-test for the next-cube machine, now that the serial output works. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-6-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07escc: introduce a selector for the register bitLaurent Vivier2-6/+25
On Sparc and PowerMac, the bit 0 of the address selects the register type (control or data) and bit 1 selects the channel (B or A). On m68k Macintosh and NeXTcube, the bit 0 selects the channel and bit 1 the register type. This patch introduces a new parameter (bit_swap) to the device interface to indicate bits usage must be swapped between registers and channels. For the moment all the machines use the bit 0, but this change will be needed to emulate the Quadra 800 or NeXTcube machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> [thh: added NeXTcube to the patch description] Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-5-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07m68k: Add NeXTcube machineThomas Huth3-1/+980
It is still quite incomplete (no SCSI, no floppy emulation, no network, etc.), but the firmware already shows up the debug monitor prompt in the framebuffer display, so at least the very basics are already working. This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-cube.c and altered quite a bit to fit the latest interface and coding conventions of the current QEMU. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-4-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07m68k: Add NeXTcube keyboard deviceThomas Huth3-0/+294
It is likely still quite incomplete (e.g. mouse and interrupts are not implemented yet), but it is good enough for keyboard input at the firmware monitor. This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-kbd.c and altered to fit the latest interface of the current QEMU (e.g. to use memory_region_init_io() instead of cpu_register_physical_memory()). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-3-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07m68k: Add NeXTcube framebuffer device emulationThomas Huth5-0/+159
The NeXTcube uses a linear framebuffer with 4 greyscale colors and a fixed resolution of 1120 * 832. This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c and altered to fit the latest interface of the current QEMU (e.g. the device has been "qdev"-ified etc.). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-2-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-06Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-09-05-v2' ↵Peter Maydell14-104/+141
into staging nbd patches for 2019-09-05 - Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images - Tolerate larger set of server error responses during handshake - More precision on handling fallocate() failures due to alignment - Better documentation of NBD connection URIs - Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert # gpg: Signature made Thu 05 Sep 2019 22:08:17 BST # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2019-09-05-v2: nbd: Implement server use of NBD FAST_ZERO nbd: Implement client use of NBD FAST_ZERO nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO nbd: Improve per-export flag handling in server docs: Update preferred NBD device syntax block: workaround for unaligned byte range in fallocate() nbd: Tolerate more errors to structured reply request nbd: Use g_autofree in a few places nbd: Advertise multi-conn for shared read-only connections Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05nbd: Implement server use of NBD FAST_ZEROEric Blake3-4/+8
The server side is fairly straightforward: we can always advertise support for detection of fast zero, and implement it by mapping the request to the block layer BDRV_REQ_NO_FALLBACK. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-5-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: update iotests 223, 233]
2019-09-05nbd: Implement client use of NBD FAST_ZEROEric Blake1-0/+7
The client side is fairly straightforward: if the server advertised fast zero support, then we can map that to BDRV_REQ_NO_FALLBACK support. A server that advertises FAST_ZERO but not WRITE_ZEROES is technically broken, but we can ignore that situation as it does not change our behavior. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-4-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-09-05nbd: Prepare for NBD_CMD_FLAG_FAST_ZEROEric Blake5-1/+17
Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to avoid wasting time on a preliminary write-zero request that will later be rewritten by actual data, if it is known that the write-zero request will use a slow fallback; but in doing so, could not optimize for NBD. The NBD specification is now considering an extension that will allow passing on those semantics; this patch updates the new protocol bits and 'qemu-nbd --list' output to recognize the bit, as well as the new errno value possible when using the new flag; while upcoming patches will improve the client to use the feature when present, and the server to advertise support for it. The NBD spec recommends (but not requires) that ENOTSUP be avoided for all but failures of a fast zero (the only time it is mandatory to avoid an ENOTSUP failure is when fast zero is supported but not requested during write zeroes; the questionable use is for ENOTSUP to other actions like a normal write request). However, clients that get an unexpected ENOTSUP will either already be treating it the same as EINVAL, or may appreciate the extra bit of information. We were equally loose for returning EOVERFLOW in more situations than recommended by the spec, so if it turns out to be a problem in practice, a later patch can tighten handling for both error codes. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: tweak commit message, also handle EOPNOTSUPP]
2019-09-05nbd: Improve per-export flag handling in serverEric Blake5-35/+40
When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-09-05docs: Update preferred NBD device syntaxEric Blake1-2/+9
Mention the preferred URI form, especially since NBD is trying to standardize that form: https://lists.debian.org/nbd/2019/06/msg00012.html Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190903145634.20237-1-eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2019-09-05block: workaround for unaligned byte range in fallocate()Andrey Shinkevich2-1/+8
Revert the commit 118f99442d 'block/io.c: fix for the allocation failure' and use better error handling for file systems that do not support fallocate() for an unaligned byte range. Allow falling back to pwrite in case fallocate() returns EINVAL. Suggested-by: Kevin Wolf <kwolf@redhat.com> Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-Id: <1566913973-15490-1-git-send-email-andrey.shinkevich@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-09-05nbd: Tolerate more errors to structured reply requestEric Blake3-35/+38
A server may have a reason to reject a request for structured replies, beyond just not recognizing them as a valid request; similarly, it may have a reason for rejecting a request for a meta context. It doesn't hurt us to continue talking to such a server; otherwise 'qemu-nbd --list' of such a server fails to display all available details about the export. Encountered when temporarily tweaking nbdkit to reply with NBD_REP_ERR_POLICY. Present since structured reply support was first added (commit d795299b reused starttls handling, but starttls is different in that we can't fall back to other behavior on any error). Note that for an unencrypted client trying to connect to a server that requires encryption, this defers the point of failure to when we finally execute a strict command (such as NBD_OPT_GO or NBD_OPT_LIST), now that the intermediate NBD_OPT_STRUCTURED_REPLY does not diagnose NBD_REP_ERR_TLS_REQD as fatal; but as the protocol eventually gets us to a command where we can't continue onwards, the changed error message doesn't cause any security concerns. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190824172813.29720-3-eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [eblake: fix iotest 233]
2019-09-05nbd: Use g_autofree in a few placesEric Blake3-30/+15
Thanks to our recent move to use glib's g_autofree, I can join the bandwagon. Getting rid of gotos is fun ;) There are probably more places where we could register cleanup functions and get rid of more gotos; this patch just focuses on the labels that existed merely to call g_free. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190824172813.29720-2-eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-09-05nbd: Advertise multi-conn for shared read-only connectionsEric Blake6-5/+8
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be advertised when the server promises cache consistency between simultaneous clients (basically, rules that determine what FUA and flush from one client are able to guarantee for reads from another client). When we don't permit simultaneous clients (such as qemu-nbd without -e), the bit makes no sense; and for writable images, we probably have a lot more work before we can declare that actions from one client are cache-consistent with actions from another. But for read-only images, where flush isn't changing any data, we might as well advertise multi-conn support. What's more, advertisement of the bit makes it easier for clients to determine if 'qemu-nbd -e' was in use, where a second connection will succeed rather than hang until the first client goes away. This patch affects qemu as server in advertising the bit. We may want to consider patches to qemu as client to attempt parallel connections for higher throughput by spreading the load over those connections when a server advertises multi-conn, but for now sticking to one connection per nbd:// BDS is okay. See also: https://bugzilla.redhat.com/1708300 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190815185024.7010-1-eblake@redhat.com> [eblake: tweak blockdev-nbd.c to not request shared when writable, fix iotest 233] Reviewed-by: John Snow <jsnow@redhat.com>
2019-09-05Merge remote-tracking branch ↵Peter Maydell50-511/+548
'remotes/huth-gitlab/tags/pull-request-2019-09-05-v2' into staging - Make the core libqtest library independent from global_qtest - Clean up docs from hard-coded qemu-system-* names - Install libattr-dev and libcap-dev in gitlab-ci to test virtio-9p # gpg: Signature made Thu 05 Sep 2019 15:52:30 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-09-05-v2: gitlab-ci.yml: Install libattr-devel and libcap-devel to test virtio-9p qemu-doc: Do not hard-code the name of the QEMU binary tests/vm: Take the J=x setting into account for the vm-boot-ssh targets, too tests/libqtest: Use libqtest-single.h in tests that require global_qtest tests/libqtest: Move global_test wrapper function into a separate header tests: Remove unnecessary global_qtest references tests/libqos: Replace clock_step with qtest_clock_step in virtio code tests/libqos/e1000e: Make e1000e libqos functions independent from global_qtest tests/migration: Do not use functions anymore that rely on global_qtest Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05Merge remote-tracking branch 'remotes/berrange/tags/docs-pull-request' into ↵Peter Maydell5-492/+671
staging docs: add docs about use of automatic cleanup functions This is ostensibly about adding docs for the g_autofree/g_autoptr macros. As part of doing that, however, the existing HACKING doc is merged into the CODING_STYLE doc and the text is converted to rst with a table of contents. # gpg: Signature made Thu 05 Sep 2019 14:43:44 BST # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/docs-pull-request: docs: split the CODING_STYLE doc into distinct groups docs: document use of automatic cleanup functions in glib docs: merge HACKING.rst contents into CODING_STYLE.rst docs: convert README, CODING_STYLE and HACKING to RST syntax Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05gitlab-ci.yml: Install libattr-devel and libcap-devel to test virtio-9pThomas Huth1-1/+1
So far the gitlab-ci was not testing virtio-9p yet, since we did not install libattr-devel and libcap-devel in any of the pipelines. Do it now to get some more test coverage. Message-Id: <20190905111729.1197-1-thuth@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-05docs: split the CODING_STYLE doc into distinct groupsDaniel P. Berrangé1-0/+9
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-05docs: document use of automatic cleanup functions in glibDaniel P. Berrangé1-0/+85
Document the use of g_autofree and g_autoptr in glib for automatic freeing of memory. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-05docs: merge HACKING.rst contents into CODING_STYLE.rstDaniel P. Berrangé3-301/+297
The split of information between the two docs is rather arbitary and unclear. It is simpler for contributors if all the information is in one file. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-05docs: convert README, CODING_STYLE and HACKING to RST syntaxDaniel P. Berrangé4-102/+191
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-05target/arm: Inline gen_bx_im into callersRichard Henderson1-19/+7
There are only two remaining uses of gen_bx_im. In each case, we know the destination mode -- not changing in the case of gen_jmp or changing in the case of trans_BLX_i. Use this to simplify the surrounding code. For trans_BLX_i, use gen_jmp for the actual branch. For gen_jmp, use gen_set_pc_im to set up the single-step. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-70-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Clean up disas_thumb_insnRichard Henderson1-25/+2
Now that everything is converted, remove the rest of the legacy decode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-69-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, long branchesRichard Henderson2-49/+43
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-68-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, Unconditional branchRichard Henderson2-7/+8
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-67-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, load (literal)Richard Henderson2-40/+6
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-66-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, shift immediateRichard Henderson2-24/+10
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-65-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, Miscellaneous 16-bit instructionsRichard Henderson2-87/+55
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-64-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, Conditional branches, Supervisor callRichard Henderson2-23/+15
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-63-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-05target/arm: Convert T16, push and popRichard Henderson2-71/+22
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190904193059.26202-62-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-01-08 16:25:09 +0000