aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-04-04target-arm: Make Neon helper routines use correct FP statusPeter Maydell1-2/+1
Make the Neon helper routines use the correct FP status from the CPUEnv rather than using a dummy static one. This means they will correctly handle denormals and NaNs and will set FPSCR exception bits properly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04target-arm: Use global env in iwmmxt_helper.c helpersPeter Maydell3-175/+156
Use the global 'env' variable in the helper functions in iwmmxt_helper.c. This means we don't need to pass env as an argument to them any more. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04target-arm: Use global env in neon_helper.c helpersPeter Maydell3-206/+191
Use the global 'env' variable in the helper functions in neon_helper.c. This means we don't need to pass env as an argument to them any more. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04Makefile.target: Allow target helpers to be in any *_helper.c filePeter Maydell1-1/+1
Build all files matching *_helper.c with HELPER_CFLAGS, not just op_helper.c. This allows you to put target helper functions which use the global 'env' variable in multiple source files. This only affects the ARM target as all the other targets currently only have op_helper.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04Fix non-portable format string in usb-ccid.cDavid Gibson1-1/+1
At one point, usb-ccid.c attempts to use a %lX format specifier to print a uint64_t, which is only correct on some host platforms. This patch corrects the statement to use the stdint specified PRIX64 constant instead. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04MAINTAINERS: add Milkymist boardMichael Walle1-0/+5
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add support for the Milkymist boardMichael Walle3-0/+218
This patch adds almost complete support for the Milkymist system-on-chip (http://www.milkymist.org). Additional to running bare metal applications, booting a linux kernel with initrd is supported. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add milkymist hw support functionsMichael Walle1-0/+204
This patch adds wrappers for easy creation of the qdev devices. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist VGAFB supportMichael Walle4-0/+398
This patch adds support for Milkymist's VGA framebuffer. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist UART supportMichael Walle3-0/+187
This patch adds support for Milkymist's simple UART. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist TMU2 supportMichael Walle3-0/+488
This patch adds support for Milkymist's texture mapping unit. For fast computation this model needs hardware accelerated 3D graphics support (OpenGL). There is no graphical output, all computations belong to internal framebuffers only. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04configure: add opengl detectionMichael Walle1-0/+30
This patch introduce a new config option CONFIG_OPENGL. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist System Controller supportMichael Walle3-0/+342
This patch adds support for Milkymist's System Controller core. The model has the following features: - support for shutting down and restarting the board - provide two timers and GPIO - provide registers for system identification and reading the boards capabilities Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist SoftUSB supportMichael Walle3-0/+366
This patch adds support for Milkymist's SoftUSB core. This model differ from the real hardware in its functionality. The real hardware consits of a tiny freely programmable microcontroller which controls the USB ports. For simplicity reasons, this model emulates only keyboard and mouse input devices, eg. input events translates directly to the corresponding expected messages. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist PFPU supportMichael Walle3-0/+543
This patch adds support for Milkymist's Programmable FPU. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist Minimac supportMichael Walle3-0/+581
This patch adds support for Milkymist's minimal Ethernet MAC. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist memory card supportMichael Walle4-2/+302
This patch adds support for Milkymist's memory card core. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist HPDMC supportMichael Walle3-0/+166
This patch adds support for the Milkymist's High Performance Dynamic Memory Controller. This is just a dumb model without any functionality. While the real hardware acts for example as a bridge between software and hardware for sending SDRAM commans, this model will only eat up these commands and always returns the expected hardware states, eg. PLL locked etc. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist AC97 supportMichael Walle4-0/+351
This patch adds support for the Milkymist AC97 compatible sound output and input core. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04Revert "ioapic: when switches to level trigger mode, interrupts raised ↵Aurelien Jarno1-1/+0
repeatedly." This reverts commit 9bcfc7daabb138b0fe3d64d74892942d482e5bbd.
2011-04-04s390x: enable CPU_QuadUUlrich Hecht1-1/+1
S390x uses the QuadU type, so let's enable it. Signed-off-by: Ulrich Hecht <uli@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04s390x: Enable nptl for s390xUlrich Hecht1-0/+1
S390x user emulation can do nptl. Reflect this in the configure script. Signed-off-by: Ulrich Hecht <uli@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04s390x: Enable disassembler for s390xUlrich Hecht1-0/+6
This patch enables the instruction disassembler when using an S390x target. Signed-off-by: Ulrich Hecht <uli@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04s390x: fix s390-virtio-serialAlexander Graf2-5/+5
Commit 6b331efb733a0f913ddc0b7762a1307dec304061 broke the s390 proxy version of virtio-serial by only taking its PCI brother into account. So let's adjust s390-virtio-serial the same way as its PCI counterpart, making it compile and work again. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04s390x: fix KVM targetAlexander Graf1-1/+1
During Jan's rework of the generic KVM layer, he added some more error checks and actually aborted if something went wrong. Unfortunately, one of the s390 internal error codes slipped through, aborting the VM without needing to. This patch fixes booting of S390x virtual machines in KVM. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04virtio: use generic name when possibleAlexander Graf4-4/+9
We have two different virtio buses: pci and s390. The abstraction path taken in qemu is to have generic aliases for each device type in the architecture specific qdev devices. So let's make use of these aliases whenever we can and define them whenever we can. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04Only build ivshmem when CONFIG_PCI && CONFIG_KVMAlexander Graf1-1/+7
The ivshmem depends on PCI and KVM, not only KVM. Reflect this in the Makefile, so we don't get build errors on s390x. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Cam Macdonell <cam@cs.ualberta.ca> CC: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04w32: Fix compilation (wrong include file)Stefan Weil1-2/+1
arpa/inet.h is not available for w32, so commit edbb21363fbfe40e050f583df921484cbc31c79d breaks w32 compilations. This is fixed by using qemu_socket.h. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04register signal handler after initializing SDL.Gleb Natapov1-3/+3
SDL library initialization mangles signal handlers, so QEMU should register them after initializing SDL. This was the case before and code even have a comment about that. Fix it to be so again. Signed-off-by: Gleb Natapov <gleb@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04vl.c: Tidy up message printed when we exit on a signalPeter Maydell1-2/+9
Tidy up the message printed when qemu exits due to a signal, so that it's clearer where the message is coming from and that it's not just stray debug output. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04net: Remove unused net-checksum.c fileStefan Hajnoczi1-86/+0
The common checksum functions were moved to net/checksum.c in commit 7200ac3c7c8eefe574193b49eeff09f120e11ec7 but the original net-checksum.c was never deleted from the source tree. Remove it now since all users of the checksum functions link against net/checksum.o and net-checksum.c is not even compiled anymore. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04e1000: Mask out lower bits of RDBAL/TDBALKevin Wolf1-3/+18
Rx and Tx descriptors are 16 byte aligned, so the lower bits are ignored by real hardware. In fact, they always read back as zero on real hardware, but probably nobody relies on that. Signed-off-by: Kevin Wolf <mail@kevin-wolf.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03gdbstub: Catch and report more vmstop reasonsJan Kiszka1-10/+39
When the VM goes into stop state while there is a gdb frontend attached, it makes sense to inform gdb about this fact and at least a bit about the stop reason. Basically, all stops are interesting except for the temporary VMSTOP_SAVE/LOADVM. The patch maps the relevant VMSTOP reasons on unique and more or less associatable signals that gdb understands. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03tests/cris: Fix some errors and potential crashesStefan Weil4-4/+4
These errors were reported by cppcheck: tests/cris/check_openpf1.c:30: error: Mismatching allocation and deallocation: f tests/cris/check_openpf2.c:13: error: Mismatching allocation and deallocation: f tests/cris/check_stat3.c:16: error: Buffer overrun possible for long cmd-line args tests/cris/check_stat4.c:18: error: Buffer overrun possible for long cmd-line args The first two are obvious coding errors (fopen needs fclose, not close). The last two may seem less important (nobody will start test code with an argument of more than 1022 characters which raises a buffer overrun). Fixing them nevertheless helps with static code checks like those done by cppcheck. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-03ioapic: when switches to level trigger mode, interrupts raised repeatedly.Isaku Yamahata1-0/+1
- the trigger mode is edge at first - During initializatoin, the interrupt is raised as edge which is masked. The corresponding bit of irr is set. - Then the mode is switched to level and it's unmasked. - the bit of irr is set, so the interrupt is raised repeatedly by ioapic_service(). - OS considers that the irq line is broken and falls back to polling mode. This patch fixes the issues. After raising edige, clear the bit of irr. > Bringing up interface eth0: > Determining IP information for eth0...irq 18: nobody cared (try booting with the "irqpoll" option) > Pid: 4126, comm: ip Not tainted 2.6.38-rc7 #1 > Call Trace: > <IRQ> [<ffffffff8105b009>] ? __report_bad_irq+0x38/0x87 > [<ffffffff8105b177>] ? note_interrupt+0x11f/0x188 > [<ffffffff8105bacf>] ? handle_fasteoi_irq+0xa7/0xd1 > [<ffffffff810046ff>] ? handle_irq+0x83/0x8c > [<ffffffff81003eb9>] ? do_IRQ+0x48/0xaf > [<ffffffff81300513>] ? ret_from_intr+0x0/0xe > [<ffffffff81031ab8>] ? __do_softirq+0x4f/0x114 > [<ffffffff81002d6c>] ? call_softirq+0x1c/0x28 > [<ffffffff81004647>] ? do_softirq+0x33/0x68 > [<ffffffff810316fb>] ? irq_exit+0x36/0x38 > [<ffffffff81015f2c>] ? smp_apic_timer_interrupt+0x88/0x96 > [<ffffffff81002853>] ? apic_timer_interrupt+0x13/0x20 > <EOI> [<ffffffff810177ed>] ? __ioapic_set_affinity+0x68/0x7c > [<ffffffff813000f0>] ? _raw_spin_unlock_irqrestore+0x8/0xa > [<ffffffff8105a84f>] ? __setup_irq+0x224/0x2cb > [<ffffffff8120e3c5>] ? e1000_intr+0x0/0x103 > [<ffffffff8105a9c7>] ? request_threaded_irq+0xd1/0x114 > [<ffffffff8120e396>] ? e1000_request_irq+0x34/0x63 > [<ffffffff8121237d>] ? e1000_open+0x81/0x11f > [<ffffffff8129097c>] ? call_netdevice_notifiers+0x45/0x4a > [<ffffffff81290d8d>] ? __dev_open+0x97/0xc4 > [<ffffffff8128e9c5>] ? __dev_change_flags+0xb9/0x13d > [<ffffffff81290cc1>] ? dev_change_flags+0x1c/0x51 > [<ffffffff812d0542>] ? devinet_ioctl+0x26e/0x594 > [<ffffffff812d174c>] ? inet_ioctl+0x92/0xaa > [<ffffffff81281d75>] ? T.1003+0x13/0x32 > [<ffffffff81282152>] ? sock_ioctl+0x1f2/0x1ff > [<ffffffff810ae2d3>] ? do_vfs_ioctl+0x498/0x4e7 > [<ffffffff81281203>] ? sock_alloc_file+0xb3/0x115 > [<ffffffff8109f79f>] ? fd_install+0x31/0x5d > [<ffffffff810ae364>] ? sys_ioctl+0x42/0x65 > [<ffffffff81001f3b>] ? system_call_fastpath+0x16/0x1b > handlers: > [<ffffffff8120e3c5>] (e1000_intr+0x0/0x103) > Disabling IRQ #18 Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03Fix trivial "endianness bugs"Stefan Weil5-15/+15
Replace endianess -> endianness. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03hw/vexpress.c: Add model of ARM Versatile Express boardPeter Maydell2-0/+225
Add a model of the ARM Versatile Express board (with A9MPx4 daughterboard). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03target-arm/helper.c: For float-int conversion helpers pass ints as intsPeter Maydell2-130/+85
Correct the argument and return types for the float<->int conversion helper functions so that integer arguments and return values are declared as uint32_t/uint64_t, not float32/float64. This allows us to remove the hand-rolled functions which were doing bitwise copies between the types via unions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03target-arm: Use new softfloat min/max functions for VMAX, VMINPeter Maydell1-6/+2
Use the new softfloat min/max functions to implement the Neon VMAX and VMIN instructions. This allows us to get the right behaviour for NaN and negative zero. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03softfloat: Add float*_min() and float*_max() functionsPeter Maydell2-0/+53
Add min and max operations to softfloat. This allows us to implement propagation of NaNs and handling of negative zero correctly (unlike the approach of having target helper routines return one of the operands based on the result of a comparison op). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03target-arm: Correct ABD's handling of negative zeroesPeter Maydell1-3/+1
Implement ABD by taking the absolute value of the difference of the operands (as the ARM ARM specifies) rather than by flipping the order of the operands to the subtract based on the results of a comparison. The latter approch gives the wrong answers for some edge cases like negative zero. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03target-arm: Fix VCLE.F32 #0, VCLT.F32 #0 NaN handlingPeter Maydell1-6/+12
Implementing the floating-point versions of VCLE #0 and VCLT #0 by doing a GT comparison and inverting the result gives the wrong result if the input is a NaN. Implement as a GT comparison with the operands swapped instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03target-arm: Return right result for Neon comparison with NaNsPeter Maydell1-10/+18
Fix the helper functions implementing the Neon floating point comparison ops (VCGE, VCGT, VCEQ, VACGT, VACGE) to return the right answer when one of the values being compared is a NaN. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03target-arm/neon_helper.c: Use make_float32/float32_val macrosPeter Maydell1-39/+17
Use the softfloat make_float32 and float32_val macros to convert between softfloat's float32 type and raw uint32_t types, rather than private conversion functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01ccid: add docsAlon Levy1-0/+135
Add documentation for the usb-ccid device and accompanying two card devices, ccid-card-emulated and ccid-card-passthru. Signed-off-by: Alon Levy <alevy@redhat.com>
2011-04-01ccid: add ccid-card-emulated deviceAlon Levy2-0/+596
This devices uses libcacard (internal) to emulate a smartcard conforming to the CAC standard. It attaches to the usb-ccid bus. Usage instructions (example command lines) are in the following patch in docs/ccid.txt. It uses libcacard which uses nss, so it can work with both hw cards and certificates (files). Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v20->v21: (Jes Sorenson review) * cosmetics * use qemu-thread and qemu_malloc/qemu_free changes from v19->v20: * checkpatch.pl changes from v18->v19: * add qdev.desc * backend: drop the enumeration property, back to using a string one. changes from v16->v17: * use PROP_TYPE_ENUM for backend changes from v15->v16: * fix error reporting in initfn * bump copyright year * update copyright license changes from v1: * remove stale comments, use only c-style comments * bugfix, forgot to set recv_len * change reader name to 'Virtual Reader'
2011-04-01libcacard: add docsRobert Relyea1-0/+483
2011-04-01libcacard: add vscclientRobert Relyea2-1/+658
client to talk to ccid-card-passthru and use smartcard on client to perform actual operations. v23->v24 changes: (Jes Sorensen review 2) * use qemu_socket instead of socket * use fprintf(stderr,..) for errors * remove unneccessary includes since using qemu_common.h
2011-04-01libcacard: initial commitRobert Relyea24-2/+4076
libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2011-04-01ccid: add passthru card deviceAlon Levy2-1/+341
The passthru ccid card is a device sitting on the usb-ccid bus and using a chardevice to communicate with a remote device using the VSCard protocol defined in libcacard/vscard_common.h Usage docs available in following patch in docs/ccid.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- Changes from v23->v24: * fixed double license line in header. Changes from v20->v21: (Jes Sorensen review) * add reference to COPYING in header * long comment reformatting Changes from v19->v20: * checkpatch.pl Changes from v18->v19: * add qdev.desc * remove .qdev.unplug (no hot unplug support for ccid bus) Changes from v16->v17: * fix wrong cast when receiving VSC_Error * ccid-card-passthru: force chardev user wakeup by sending Init see lengthy comment below. Changes from v15->v16: Behavioral changes: * return correct size * return error instead of assert if client sent too large ATR * don't assert if client sent too large a size, but add asserts for indices to buffer * reset vscard_in indices on chardev disconnect * handle init from client * error if no chardev supplied * use ntoh, hton * eradicate reader_id_t * remove Reconnect usage (removed from VSCARD protocol) * send VSC_SUCCESS on card insert/remove and reader add/remove Style fixes: * width of line fix * update copyright * remove old TODO's * update file header comment * use macros for debug levels * c++ style comment replacement * update copyright license * fix ATR size comment * fix whitespace in struct def * fix DPRINTF prefix * line width fix ccid-card-passthru: force chardev user wakeup by sending Init The problem: how to wakeup the user of the smartcard when the smartcard device is initialized? Long term solution: have a callback interface. This was done via the deprecated so called chardev ioctl interface. Short term solution: do a write. Specifically we write an Init message. And we change the client to send it's own Init message regardless of receiving this one. Additional Init messages will be regarded as acceptable, the first one received after connection establishment is the determining one wrt capabilities.
generated by cgit v1.1 at 2024-07-21 12:25:43 +0000