aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-02-18target-arm: Move bank_number() into internals.hPeter Maydell2-26/+25
Move bank_number()'s implementation into internals.h, so it's available in the user-mode-only compile as well. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Move get/set_r13_banked() to op_helper.cPeter Maydell2-33/+37
Move get/set_r13_banked() from helper.c to op_helper.c. This will let us add exception-raising code to them, and also puts them in the same file as get/set_user_reg(), which makes some conceptual sense. (The original reason for the helper.c/op_helper.c split was that only op_helper.c had access to the CPU env pointer; this distinction has not been true for a long time, though, and so the split is now rather arbitrary.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-18target-arm: Clean up trap/undef handling of SRSPeter Maydell1-5/+61
The SRS instruction is: * UNDEFINED in Hyp mode * UNPREDICTABLE in User or System mode * UNPREDICTABLE if the specified mode isn't accessible * trapped to EL3 if EL3 is AArch64 and we are at Secure EL1 Clean up the code to handle all these cases cleanly, including picking UNDEF as our choice of UNPREDICTABLE behaviour rather blindly trusting the mode field passed in the instruction. As part of this, move the check for IS_USER into gen_srs() itself rather than having it done by the caller. The exception is that we don't UNDEF for calls from System mode, which need a runtime check. This will be dealt with in the following commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-18target-arm: Report correct syndrome for FPEXC32_EL2 trapsPeter Maydell3-2/+20
If access to FPEXC32_EL2 is trapped by CPTR_EL2.TFP or CPTR_EL3.TFP, this should be reported with a syndrome register indicating an FP access trap, not one indicating a system register access trap. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Implement MDCR_EL3.TDA and MDCR_EL2.TDA trapsPeter Maydell1-9/+30
Implement the debug register traps controlled by MDCR_EL2.TDA and MDCR_EL3.TDA. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Implement MDCR_EL2.TDRA trapsPeter Maydell1-3/+24
Implement trapping of the "debug ROM" registers, which are controlled by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Implement MDCR_EL3.TDOSA and MDCR_EL2.TDOSA trapsPeter Maydell2-1/+34
Implement the traps to EL2 and EL3 controlled by the bits MDCR_EL2.TDOSA MDCR_EL3.TDOSA. These can configurably trap accesses to the "powerdown debug" registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Fix handling of SCR.SMDPeter Maydell1-5/+7
We weren't quite implementing the handling of SCR.SMD correctly. The condition governing whether the SMD bit should apply only for NS state is "is EL3 is AArch32", not "is the current EL AArch32". Fix the condition, and clarify the comment both to reflect this and to expand slightly on what's going on for the v7-no-Virtualization case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-18target-arm: correct CNTFRQ access rightsPeter Maydell2-3/+38
Correct some corner cases we were getting wrong for CNTFRQ access rights: * should UNDEF from 32-bit Secure EL1 * only writable from the highest implemented exception level, which might not be EL1 now To clarify the code, provide a new utility function arm_highest_el() which returns the highest implemented exception level. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-18Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160218' ↵Peter Maydell13-232/+393
into staging ppc patch queue for 2016-02-18 Currently accumulated patches for target-ppc, pseries machine type and related devices. * Some cleanups to management of SDR1 and the hashed page table * Implementations of a number of simple PAPR hypercalls * Significant improvements to the Macintosh CUDA device * Several bugfixes # gpg: Signature made Thu 18 Feb 2016 04:16:51 GMT using RSA key ID 20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.6-20160218: (26 commits) hw/ppc/spapr: Halt CPU when powering off via RTAS call pseries: Include missing pseries-2.5 compat properties in pseries-2.4 cuda: remove CUDA_GET_SET_IIC/CUDA_COMBINED_FORMAT_IIC commands cuda: remove GET_6805_ADDR command cuda: port SET_TIME command to new framework cuda: port GET_TIME command to new framework cuda: port SET_POWER_MESSAGES command to new framework cuda: port FILE_SERVER_FLAG command to new framework cuda: port RESET_SYSTEM command to new framework cuda: port POWERDOWN command to new framework cuda: port SET_DEVICE_LIST command to new framework cuda: port SET_AUTO_RATE command to new framework cuda: port AUTOPOLL command to new framework cuda: move unknown commands reject out of switch cuda: add a framework to handle commands hw/ppc/spapr: Implement the h_set_xdabr hypercall hw/ppc/spapr: Implement h_set_dabr hw/ppc/spapr: Add h_set_sprg0 hypercall migration: ensure htab_save_first completes after timeout target-ppc: Remove hack for ppc_hash64_load_hpte*() with HV KVM ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18hw/ppc/spapr: Halt CPU when powering off via RTAS callThomas Huth1-0/+1
The LoPAPR specification defines the following for the RTAS power-off call: "On successful operation, does not return". However, the implementation in QEMU currently returns and runs the guest CPU again for some more cycles. This caused some trouble with the new ppc implementation of the kvm-unit-tests recently. So let's make sure that the QEMU implementation follows the spec, thus stop the CPU to make sure that the RTAS call does not return to the guest anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Tested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17pseries: Include missing pseries-2.5 compat properties in pseries-2.4David Gibson1-0/+1
Commit 4b23699 "pseries: Add pseries-2.6 machine type" added a new SPAPR_COMPAT_2_5 macro in the usual way. However, it didn't add this macro to the existing SPAPR_COMPAT_2_4 macro so that pseries-2.4 inherits newer compatibility properties which are needed for 2.5 and earlier. This corrects the oversight. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2016-02-17cuda: remove CUDA_GET_SET_IIC/CUDA_COMBINED_FORMAT_IIC commandsHervé Poussineau1-23/+0
We currently don't emulate the I2C bus provided by CUDA. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: remove GET_6805_ADDR commandHervé Poussineau1-3/+0
It doesn't seem to be used, and operating systems should accept a 'unknown command' answer. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port SET_TIME command to new frameworkHervé Poussineau1-6/+18
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port GET_TIME command to new frameworkHervé Poussineau1-8/+21
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port SET_POWER_MESSAGES command to new frameworkHervé Poussineau1-3/+16
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port FILE_SERVER_FLAG command to new frameworkHervé Poussineau1-1/+16
This command tells if computer should automatically wake-up after a power loss. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port RESET_SYSTEM command to new frameworkHervé Poussineau1-4/+13
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port POWERDOWN command to new frameworkHervé Poussineau1-4/+13
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port SET_DEVICE_LIST command to new frameworkHervé Poussineau4-11/+28
Also implement the command, by taking device list mask into account when polling ADB devices. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port SET_AUTO_RATE command to new frameworkHervé Poussineau2-6/+31
Also implement the command, by removing the hardcoded period of 20 ms/50 Hz and replacing it by the one requested by user. Update VMState version to store this new parameter. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: port AUTOPOLL command to new frameworkHervé Poussineau1-15/+25
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: move unknown commands reject out of switchHervé Poussineau1-14/+16
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17cuda: add a framework to handle commandsHervé Poussineau1-0/+34
Next commits will port existing CUDA commands to this framework. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17hw/ppc/spapr: Implement the h_set_xdabr hypercallThomas Huth1-0/+22
The H_SET_XDABR hypercall is similar to H_SET_DABR, but also sets the extended DABR (DABRX) register. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17hw/ppc/spapr: Implement h_set_dabrThomas Huth1-5/+20
According to LoPAPR, h_set_dabr should simply set DABRX to 3 (if the register is available), and load the parameter into DABR. If DABRX is not available, the hypervisor has to check the "Breakpoint Translation" bit of the DABR register first. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17hw/ppc/spapr: Add h_set_sprg0 hypercallThomas Huth1-2/+13
This is a very simple hypercall that only sets up the SPRG0 register for the guest (since writing to SPRG0 was only permitted to the hypervisor in older versions of the PowerISA). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17migration: ensure htab_save_first completes after timeoutDavid Gibson1-1/+6
htab_save_first_pass could return without finishing its work due to timeout. The patch checks if another invocation of it is necessary and will call it in htab_save_complete if necessary. Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [removed overlong line] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17target-ppc: Remove hack for ppc_hash64_load_hpte*() with HV KVMDavid Gibson2-9/+2
With HV KVM, the guest's hash page table (HPT) is managed by the kernel and not directly accessible to QEMU. This means that spapr->htab is NULL and normally env->external_htab would also be NULL for each cpu. However, that would cause ppc_hash64_load_hpte*() to do the wrong thing in the few cases where QEMU does need to load entries from the in-kernel HPT. Specifically, seeing external_htab is NULL, they would look for an HPT within the guest's address space instead. To stop that we have an ugly hack in the pseries machine type code to set external htab to (void *)1 instead. This patch removes that hack by having ppc_hash64_load_hpte*() explicitly check kvmppc_kern_htab instead, which makes more sense. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-02-17pseries: Move hash page table allocation to reset timeDavid Gibson1-74/+56
At the moment the size of the hash page table (HPT) is fixed based on the maximum memory allowed to the guest. As such, we allocate the table during machine construction, and just clear it at reset. However, we're planning to implement a PAPR extension allowing the hash page table to be resized at runtime. This will mean that on reset we want to revert it to the default size. It also means that when migrating, we need to make sure the destination allocates an HPT of size matching the host, since the guest could have changed it before the migration. This patch replaces the spapr_alloc_htab() and spapr_reset_htab() functions with a new spapr_reallocate_hpt() function. This is called at reset and inbound migration only, not during machine init any more. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-02-17pseries: Add helper to calculate recommended hash page table sizeDavid Gibson1-10/+14
At present we calculate the recommended hash page table (HPT) size for a pseries guest just once in ppc_spapr_init() before allocating the HPT. In future patches we're going to want this calculation in other places, so this splits it out into a helper function. While we're at it, change the calculation to use ctz() instead of an explicit loop. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-02-17pseries: Simplify handling of the hash page table fdDavid Gibson2-46/+41
When migrating the 'pseries' machine type with KVM, we use a special fd to access the hash page table stored within KVM. Usually, this fd is opened at the beginning of migration, and kept open until the migration is complete. However, if there is a guest reset during the migration, the fd can become stale and we need to re-open it. At the moment we use an 'htab_fd_stale' flag in sPAPRMachineState to signal this, which is checked in the migration iterators. But that's rather ugly. It's simpler to just close and invalidate the fd on reset, and lazily re-open it in migration if necessary. This patch implements that change. This requires a small addition to the machine state's instance_init, so that htab_fd is initialized to -1 (telling the migration code it needs to open it) instead of 0, which could be a valid fd. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-02-17target-ppc: Include missing MMU models for SDR1 in info registersDavid Gibson1-0/+2
The HMP command "info registers" produces somewhat different information on different ppc cpu variants. For those with a hash MMU it's supposed to include the SDR1, DAR and DSISR registers related to the MMU. However, the switch is missing a couple of MMU model variants, meaning we will miss out this information on certain CPUs which should have it. This patch corrects the oversight. (Really these MMU model IDs need a big cleanup, but we might as well fix the bug in the interim). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-02-17target-ppc: Remove unused kvmppc_update_sdr1() stubDavid Gibson1-5/+0
This KVM stub implementation isn't used anywhere. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-02-17hw: fix some debug message format stringsAlyssa Milburn2-4/+6
Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell31-508/+1500
* Coverity fixes for IPMI and mptsas * qemu-char fixes from Daniel and Marc-André * Bug fixes that break qemu-iotests * Changes to fix reset from panicked state * checkpatch false positives for designated initializers * TLS support in the NBD servers and clients # gpg: Signature made Tue 16 Feb 2016 16:27:17 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) nbd: enable use of TLS with nbd-server-start command nbd: enable use of TLS with qemu-nbd server nbd: enable use of TLS with NBD block driver nbd: implement TLS support in the protocol negotiation nbd: use "" as a default export name if none provided nbd: always query export list in fixed new style protocol nbd: allow setting of an export name for qemu-nbd server nbd: make client request fixed new style if advertised nbd: make server compliant with fixed newstyle spec nbd: invert client logic for negotiating protocol version nbd: convert to using I/O channels for actual socket I/O nbd: convert blockdev NBD server to use I/O channels for connection setup nbd: convert qemu-nbd server to use I/O channels for connection setup nbd: convert block client to use I/O channels for connection setup qemu-nbd: add support for --object command line arg qom: add helpers for UserCreatable object types ipmi: sensor number should not exceed MAX_SENSORS mptsas: fix wrong formula mptsas: fix memory leak mptsas: add missing va_end ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-16nbd: enable use of TLS with nbd-server-start commandDaniel P. Berrange4-25/+105
This modifies the nbd-server-start QMP command so that it is possible to request use of TLS. This is done by adding a new optional parameter "tls-creds" which provides the ID of a previously created QCryptoTLSCreds object instance. TLS is only supported when using an IPv4/IPv6 socket listener. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-17-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: enable use of TLS with qemu-nbd serverDaniel P. Berrange2-3/+68
This modifies the qemu-nbd program so that it is possible to request the use of TLS with the server. It simply adds a new command line option --tls-creds which is used to provide the ID of a QCryptoTLSCreds object previously created via the --object command line option. For example qemu-nbd --object tls-creds-x509,id=tls0,endpoint=server,\ dir=/home/berrange/security/qemutls \ --tls-creds tls0 \ --exportname default TLS requires the new style NBD protocol, so if no export name is set (via --export-name), then we use the default NBD protocol export name "" TLS is only supported when using an IPv4/IPv6 socket listener. It is not possible to use with UNIX sockets, which includes when connecting the NBD server to a host device. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-16-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: enable use of TLS with NBD block driverDaniel P. Berrange3-12/+78
This modifies the NBD driver so that it is possible to request use of TLS. This is done by providing the 'tls-creds' parameter with the ID of a previously created QCryptoTLSCreds object. For example $QEMU -object tls-creds-x509,id=tls0,endpoint=client,\ dir=/home/berrange/security/qemutls \ -drive driver=nbd,host=localhost,port=9000,tls-creds=tls0 The client will drop the connection if the NBD server does not provide TLS. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-15-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: implement TLS support in the protocol negotiationDaniel P. Berrange8-13/+296
This extends the NBD protocol handling code so that it is capable of negotiating TLS support during the connection setup. This involves requesting the STARTTLS protocol option before any other NBD options. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-14-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: use "" as a default export name if none providedDaniel P. Berrange2-2/+3
If the user does not provide an export name and the server is running the new style protocol, where export names are mandatory, use "" as the default export name if the user has not specified any. "" is defined in the NBD protocol as the default name to use in such scenarios. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-13-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: always query export list in fixed new style protocolDaniel P. Berrange4-5/+196
With the new style protocol, the NBD client will currenetly send NBD_OPT_EXPORT_NAME as the first (and indeed only) option it wants. The problem is that the NBD protocol spec does not allow for returning an error message with the NBD_OPT_EXPORT_NAME option. So if the server mandates use of TLS, the client will simply see an immediate connection close after issuing NBD_OPT_EXPORT_NAME which is not user friendly. To improve this situation, if we have the fixed new style protocol, we can sent NBD_OPT_LIST as the first option to query the list of server exports. We can check for our named export in this list and raise an error if it is not found, instead of going ahead and sending NBD_OPT_EXPORT_NAME with a name that we know will be rejected. This improves the error reporting both in the case that the server required TLS, and in the case that the client requested export name does not exist on the server. If the server does not support NBD_OPT_LIST, we just ignore that and carry on with NBD_OPT_EXPORT_NAME as before. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-12-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: allow setting of an export name for qemu-nbd serverDaniel P. Berrange2-2/+15
The qemu-nbd server currently always uses the old style protocol since it never sets any export name. This is a problem because future TLS support will require use of the new style protocol negotiation. This adds "--exportname NAME" / "-x NAME" arguments to qemu-nbd which allow the user to set an explicit export name. When an export name is set the server will always use the new style NBD protocol. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-11-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: make client request fixed new style if advertisedDaniel P. Berrange1-10/+17
If the server advertises support for the fixed new style negotiation, the client should in turn enable new style. This will allow the client to negotiate further NBD options besides the export name. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-10-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: make server compliant with fixed newstyle specDaniel P. Berrange1-23/+46
If the client does not request the fixed new style protocol, then we should only accept NBD_OPT_EXPORT_NAME. All other options are only valid when fixed new style has been activated. The qemu-nbd client doesn't currently request fixed new style protocol, but this change won't break qemu-nbd, because it fortunately only ever uses NBD_OPT_EXPORT_NAME, so was never triggering the non-compliant server behaviour. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-9-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: invert client logic for negotiating protocol versionDaniel P. Berrange1-31/+29
The nbd_receive_negotiate() method takes different code paths based on whether 'name == NULL', and then checks the expected protocol version in each branch. This patch inverts the logic, so that it takes different code paths based on what protocol version it receives and then checks if name is NULL or not as needed. This facilitates later code which allows the client to be capable of using the new style protocol regardless of whether an export name is listed or not. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-8-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: convert to using I/O channels for actual socket I/ODaniel P. Berrange8-151/+180
Now that all callers are converted to use I/O channels for initial connection setup, it is possible to switch the core NBD protocol handling core over to use QIOChannel APIs for actual sockets I/O. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-7-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: convert blockdev NBD server to use I/O channels for connection setupDaniel P. Berrange1-15/+34
This converts the blockdev NBD server to use the QIOChannelSocket class for initial listener socket setup and accepting of client connections. Actual I/O is still being performed against the socket file descriptor using the POSIX socket APIs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-6-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: convert qemu-nbd server to use I/O channels for connection setupDaniel P. Berrange1-38/+53
This converts the qemu-nbd server to use the QIOChannelSocket class for initial listener socket setup and accepting of client connections. Actual I/O is still being performed against the socket file descriptor using the POSIX socket APIs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-5-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-01 03:44:16 +0000