aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-06-19target-arm: Implement kvm_arch_reset_vcpu() for KVM ARM64Pranavkumar Sawargaonkar1-0/+4
To implement kvm_arch_reset_vcpu(), we simply re-init the VCPU using kvm_arm_vcpu_init() so that all registers of VCPU are set to their reset values by in-kernel KVM code. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-7-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm: Enable KVM_ARM_VCPU_PSCI_0_2 feature when possiblePranavkumar Sawargaonkar2-0/+6
Latest linux kernel supports in-kernel emulation of PSCI v0.2 but to enable it we need to select KVM_ARM_VCPU_PSCI_0_2 feature using KVM_ARM_VCPU_INIT ioctl. Also, we can use KVM_ARM_VCPU_PSCI_0_2 feature for VCPU only when linux kernel has KVM_CAP_ARM_PSCI_0_2 capability. This patch updates kvm_arch_init_vcpu() to enable KVM_ARM_VCPU_PSCI_0_2 feature for VCPU when KVM ARM/ARM64 has KVM_CAP_ARM_PSCI_0_2 capability. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-6-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64Pranavkumar Sawargaonkar5-12/+44
Introduce a common kvm_arm_vcpu_init() for doing KVM_ARM_VCPU_INIT ioctl in KVM ARM and KVM ARM64. This also helps us factor-out few common code lines from kvm_arch_init_vcpu() for KVM ARM/ARM64. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-5-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19kvm: Handle exit reason KVM_EXIT_SYSTEM_EVENTPranavkumar Sawargaonkar1-0/+16
In-kernel PSCI v0.2 emulation of KVM ARM/ARM64 forwards SYSTEM_OFF and SYSTEM_RESET function calls to QEMU using KVM_EXIT_SYSTEM_EVENT exit reason. This patch updates kvm_cpu_exec() to handle KVM_SYSTEM_EVENT_SHUTDOWN and KVM_SYSTEM_EVENT_RESET system-level events from QEMU-side. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-4-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19hw/block/pflash_cfi01: Report correct size info for parallel configsPeter Maydell1-3/+17
If the flash device is configured with a device-width which is not equal to the bank-width, indicating that it is actually several narrow flash devices in parallel, the CFI table should report the number of blocks and the size of a single device, not of the whole combined setup. This stops Linux from complaining: "NOR chip too large to fit in mapping. Attempting to cope..." As usual, we retain the old broken but backwards compatible behaviour when the device-width is not specified. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402409025-25694-1-git-send-email-peter.maydell@linaro.org
2014-06-19hw/arm/vexpress: Forbid specifying flash contents in two ways at oncePeter Maydell1-1/+9
Detect attempts by the user to specify the contents of the first flash device via both -bios and -drive if=pflash... simultaneously and print a helpful error message. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402419834-25982-1-git-send-email-peter.maydell@linaro.org
2014-06-19target-arm/translate-a64.c: Fix dead ?: in handle_simd_shift_fpint_conv()Peter Maydell1-1/+1
In handle_simd_shift_fpint_conv(), the combination of is_double == true, is_scalar == false and is_q == false is an unallocated encoding; the 'both parts false' case of the nested ?: expression for calculating maxpass is therefore unreachable and can be removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1402171881-14343-4-git-send-email-peter.maydell@linaro.org
2014-06-19target-arm/translate-a64.c: Remove dead ?: in disas_simd_3same_int()Peter Maydell1-1/+2
In disas_simd_3same_int(), none of the instructions permit is_q to be false with size == 3 (this would be a vector operation with a one-element vector, and the instruction set encodes those as scalar operations). Replace the always-true ?: check with an assert. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1402171881-14343-3-git-send-email-peter.maydell@linaro.org
2014-06-19target-arm: Add ULL suffix to calculation of page sizePeter Maydell1-1/+1
The maximum block size for AArch64 address translation is 2GB. This means that we need a ULL suffix on our shift to avoid shifting into the sign bit of a signed 32 bit integer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1402171881-14343-2-git-send-email-peter.maydell@linaro.org
2014-06-19hw/arm/spitz: Avoid clash with Windows header symbol MOD_SHIFTPeter Maydell1-50/+58
The Windows headers provided by MinGW define MOD_SHIFT. Avoid it by using SPITZ_MOD_* for our constants here. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm: implement PD0/PD1 bits for TTBCRFabian Aggeler2-18/+60
Corrected handling of writes to TTBCR for ARMv8 (previously UNK/SBZP bits are not RES0) and ARMv7 (new bits PD0/PD1 for CPUs with Security Extensions). Bits PD0/PD1 are now respected in get_phys_addr_v6/v5() and get_level1_table_address. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Message-id: 1402409556-18574-1-git-send-email-aggelerf@ethz.ch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19numa: use RAM_ADDR_FMT with ram_addr_tMichael S. Tsirkin1-6/+6
commit 4407ab055be995e64633322a78e64dfa376dc534 vl.c: extend -m option to support options for memory hotplug prints ram_addr_t with u64 format, this is wrong for some systems, in particular w32. print ram_addr_t with RAM_ADDR_FMT to fix build on w32. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qapi/string-output-visitor: fix bugsMichael S. Tsirkin1-3/+3
in human mode, we are creating the string: 16-31 (16-31) instead of 16-17 (10-1f) because we forgot to pass 'true' as the human parameter on one of the two calls to format_string. Also, this is a worsening of quality; previously we would produce 16 (0x10) to make it obvious which number was hex. Fix these issues. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19tests: simplify codeMichael S. Tsirkin1-3/+1
Use error_abort instead of open-coded assert. Cleaner and shorter. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19qapi: fix input visitor bugsMichael S. Tsirkin1-5/+4
Remove dead code. Reset errno to 0 before each strtoull call, as the man page requires. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19acpi: rephrase commentMichael S. Tsirkin1-2/+1
"only upto" is not proper English. Say "up to" and drop "only". Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: add ACPI_DEVICE_OST event handlingIgor Mammedov4-1/+40
emits event when ACPI OSPM evaluates _OST method of ACPI device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: add query-acpi-ospm-status commandIgor Mammedov3-0/+52
... to get ACPI OSPM status reported by ACPI devices via _OST method. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi: implement ospm_status() method for PIIX4/ICH9_LPC devicesIgor Mammedov6-0/+56
... using TYPE_ACPI_DEVICE_IF interface. Which provides status reporting of ACPI declared memory devices Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi: introduce TYPE_ACPI_DEVICE_IF interfaceIgor Mammedov4-0/+90
... it will be used to abstract generic ACPI bits from device that implements ACPI interface. ACPIOSTInfo type is used for passing-through raw _OST event/status codes reported by guest OS to a management layer. It lets management tools interpret values as specified by ACPI spec if it is interested in it. QEMU doesn't encode these values as enum, since it doesn't need to handle them and it allows interface to scale well without any changes in QEMU while guest OS and management evolves in time. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: add query-memory-devices commandIgor Mammedov7-0/+138
... allowing to get state of present memory devices. Currently implemented only for PCDIMMDevice. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19numa: handle mmaped memory allocation failure correctlyIgor Mammedov1-1/+1
when memory_region_init_ram_from_file() fails memory_region_size() will still return size that was provided at region init time. Instead use errp to properly detect error condition. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: acpi: do not hardcode preprocessorIgor Mammedov1-1/+1
but use one provided by environment, in addition force C style preprocessing so that 'gcc -E' or "clang -E" wouldn't ignore .dsl files. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: clean out whitespaceMichael S. Tsirkin1-1/+1
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qdev: recursively unrealize devices when unrealizing busPaolo Bonzini1-1/+12
When the patch was posted that became 5c21ce7 (qdev: Realize buses on device realization, 2014-03-12), it included recursive realization and unrealization of devices when the bus's "realized" property was toggled. However, due to the same old worries about recursive realization and prerequisites not being realized yet, those hunks were dropped when committing the patch. Unfortunately, this causes a use-after-free bug (easily reproduced by a PCI hot-unplug action). Before the patch, device_unparent behaved as follows: for each child bus unparent bus ----------------------------. | for each child device | | unparent device ---------------. | | | unrealize device | | | | call dc->unparent | | | '------------------------------- | '----------------------------------------' unrealize device After the patch, it behaves as follows instead: unrealize device --------------------. | for each child bus | | unrealize bus (A) | '------------------------------------' for each child bus unparent bus ----------------------. | for each child device | | unrealize device (B) | | call dc->unparent | '----------------------------------' At the step marked (B) the device might use data from the bus that is not available anymore due to step (A). To fix this, we need to unrealize devices before step (A). To sidestep concerns about recursive realization, only do recursive unrealization and leave the "value && !bus->realized" case as it is. The resulting flow is: for each child bus unrealize bus ---------------------. | for each child device | | unrealize device (B) | | call bc->unrealize (A) | '----------------------------------' unrealize device for each child bus unparent bus ----------------------. | for each child device | | unparent device | '----------------------------------' where everything is "powered down" before it is unassembled. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2014-06-19qdev: reorganize error reporting in bus_set_realizedPaolo Bonzini1-13/+5
No semantic change. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2014-06-19qapi: fix build on glib < 2.28Michael S. Tsirkin2-4/+17
The following commits: qapi: make string output visitor parse int list qapi: make string input visitor parse int list break with glib < 2.28 since they use the new g_list_free_full function. Open-code that to fix build on old systems. Cc: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qapi: make string output visitor parse int listHu Tao2-12/+255
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: split up patch
2014-06-19qapi: make string input visitor parse int listHu Tao2-8/+223
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: split up patch
2014-06-19tests: fix memory leak in test of string input visitorHu Tao1-0/+3
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19hmp: add info memdevHu Tao3-0/+44
This is the hmp counterpart of qmp query-memdev. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix build on 32 bit
2014-06-19qmp: add query-memdevHu Tao3-0/+162
Add qmp command query-memdev to query for information of memory devices Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19hostmem: add properties for NUMA memory policyHu Tao3-1/+159
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [Raise errors on setting properties if !CONFIG_NUMA. Add BUILD_BUG_ON checks. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19hostmem: add property to map memory with MAP_SHAREDPaolo Bonzini6-12/+42
A new "share" property can be used with the "memory-file" backend to map memory with MAP_SHARED instead of MAP_PRIVATE. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19hostmem: allow preallocation of any memory regionPaolo Bonzini7-0/+75
And allow preallocation of file-based memory even without -mem-prealloc. Some care is necessary because -mem-prealloc does not allow disabling preallocation for hostmem-file. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19hostmem: add merge and dump propertiesPaolo Bonzini3-1/+94
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19osdep: add merge and dump flagsMichael S. Tsirkin1-0/+4
will be used by follow up patch Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19hostmem: add file-based HostMemoryBackendPaolo Bonzini2-0/+108
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: comment tweak
2014-06-19hostmem: separate allocation from UserCreatable complete methodHu Tao3-4/+25
This allows the superclass to set various policies on the memory region that the subclass creates. Drops hostmem-ram's complete method accordingly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19backend:hostmem: replace hostmemory with host_memoryHu Tao1-12/+12
..to keep names consistant. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: pass MachineState to pc_memory_initPaolo Bonzini4-24/+19
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vl: redo -object parsingPaolo Bonzini1-29/+36
Follow the lines of the HMP implementation, using OptsVisitor to parse the options. This gives access to OptsVisitor's rich parsing of integer lists. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19memory: add error propagation to file-based RAM allocationPaolo Bonzini5-17/+44
Right now, -mem-path will fall back to RAM-based allocation in some cases. This should never happen with "-object memory-file", prepare the code by adding correct error propagation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: drop \n at end of error messages
2014-06-19memory: move mem_path handling to memory_region_allocate_system_memoryPaolo Bonzini4-14/+46
Like the previous patch did in exec.c, split memory_region_init_ram and memory_region_init_ram_from_file, and push mem_path one step further up. Other RAM regions than system memory will now be backed by regular RAM. Also, boards that do not use memory_region_allocate_system_memory will not support -mem-path anymore. This can be changed before the patches are merged by migrating boards to use the function. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19numa: add -numa node,memdev= optionPaolo Bonzini5-10/+83
This option provides the infrastructure for binding guest NUMA nodes to host NUMA nodes. For example: -object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \ -numa node,nodeid=0,cpus=0,memdev=ram-node0 \ -object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \ -numa node,nodeid=1,cpus=1,memdev=ram-node1 The option replaces "-numa node,mem=". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> MST: conflict resolution
2014-06-19qom: introduce object_property_get_enum and object_property_get_uint16ListHu Tao2-0/+63
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Introduce signed range.Hu Tao1-0/+72
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: split up patch
2014-06-19configure: add Linux libnuma detectionWanlong Gao1-0/+32
Add detection of libnuma (mostly contained in the numactl package) to the configure script. Can be enabled or disabled on the command line, default is use if available. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19memory: move RAM_PREALLOC_MASK to exec.c, renamePaolo Bonzini2-6/+6
Prepare for adding more flags. The "_MASK" suffix is unique, kill it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19memory: move preallocation code out of exec.cPaolo Bonzini6-50/+97
So that backends can use it. Since we need the page size for efficiency, move code to compute it out of translate-all.c and into util/oslib-win32.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2025-01-16 15:17:00 +0000