aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-04-19versatile_pci: Expose PCI memory space to systemPeter Maydell3-1/+77
The VersatilePB's PCI controller exposes the PCI memory space to the system via three regions controlled by the mapping control registers. Implement this so that guests can actually use MMIO-BAR PCI cards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19arm/realview: Fix mapping of PCI regionsPeter Maydell1-9/+9
Fix the mapping of the PCI regions for the realview board, which were all incorrect. (This was never noticed because the Linux kernel doesn't actually include a PCI driver for the realview boards.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Implement the PCI controller's control registersPeter Maydell3-11/+130
The versatile_pci PCI controller has a set of control registers which handle the mapping between PCI and system address spaces. Implement these registers (though for now they have no effect since we don't implement mapping PCI space into system memory at all). The most natural order for our sysbus regions has the control registers at the start, so move all the others down one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Implement the correct PCI IRQ mappingPeter Maydell1-6/+99
Implement the correct IRQ mapping for the Versatile PCI controller; it differs between realview and versatile boards, but the previous QEMU implementation was correct only for the first PCI card on a versatile board, since we weren't swizzling IRQs based on the slot number. Since this change would otherwise break any uses of PCI on Linux kernels which have an equivalent bug (since they have effectively only been tested against QEMU, not real hardware), we implement a mechanism for automatically detecting those broken kernels and switching back to the old mapping. This works by looking at the values the kernel writes to the PCI_INTERRUPT_LINE register in the config space, which is effectively the interrupt number the kernel expects the device to be using. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-04-19versatile_pci: Put the host bridge PCI device at slot 29Peter Maydell1-0/+2
On real hardware the host bridge appears as a PCI device in slot 29, so make QEMU put its host bridge in that slot too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Use separate PCI I/O space rather than system I/O spacePeter Maydell1-4/+13
Rather than overloading the system I/O space (which doesn't even make any sense on ARM) for PCI I/O, create an memory region in the PCI controller and use that to represent the I/O space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Change to subclassing TYPE_PCI_HOST_BRIDGEPeter Maydell1-11/+30
Change versatile_pci to subclass TYPE_PCI_HOST_BRIDGE and generally handle PCI in a more QOM-like fashion. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Update to realize and instance init functionsPeter Maydell1-25/+25
Update the Versatile PCI controller to use a realize function rather than SysBusDevice::init. To reflect the fact that the 'realview_pci' class is taking most of its implementation from 'versatile_pci' (and to make the QOM casts work) we make 'realview_pci' a subclass of 'versatile_pci'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Expose PCI I/O region on Versatile PBPeter Maydell2-7/+4
Comments in the QEMU source code claim that the version of the PCI controller on the VersatilePB board doesn't support the PCI I/O region, but this is incorrect; expose that region, map it in the correct location, and drop the misleading comments. This change removes the only currently implemented difference between the realview-pci and versatile-pci models; however there are other differences in not-yet-implemented functionality, so we retain the distinction between the two device types. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Fix hardcoded tabsPeter Maydell1-1/+1
There is just one line in this source file with a hardcoded tab indent, so just fix it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-18configure: remove duplicate testPaolo Bonzini1-30/+26
We already had a test to add -march=i486 when needed. Make the existing test independent of vhost-net, so that it is also used under Win32. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: CONFIG_NO_XEN is duplicatedPaolo Bonzini2-4/+1
We already define it in Makefile.target. But we need to avoid a curious double negation in order to eliminate it. Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: eliminate target_libs_softmmuPaolo Bonzini3-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: move common libraries to config-host.makPaolo Bonzini2-6/+8
Move -lm to the end of the line, so that it can be picked up as a dependency by pixman in the static build case. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: move CONFIG_QEMU_LDST_OPTIMIZATION to config-host.makPaolo Bonzini1-9/+9
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_llong/ullong instead of target_llong/ullongPaolo Bonzini4-8/+12
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: only give abi_long/ulong the alignment specified by the targetPaolo Bonzini3-19/+18
Previously, this was done for target_long/ulong, and propagated to abi_long/ulong via a typedef. But target_long/ulong should not have any specific alignment, it is never used to access guest memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_int/uint instead of target_int/uintPaolo Bonzini4-12/+16
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_short/ushort instead of target_short/ushortPaolo Bonzini4-7/+10
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use tswapreg consistently in elf_core_copy_regsPaolo Bonzini1-57/+57
Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: fix size of registers for N32Paolo Bonzini1-7/+14
Registers are 64-bit in size for the MIPS n32 ABI. Define target_elf_greg_t accordingly, and use the correct function to do endian swaps. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: fix size of ABI-dependent fields in core dumpsPaolo Bonzini1-9/+9
Some fields in core dumps are 32-bit in 32-or-64 environments (ppc64abi32, sparc32plus). Use abi_long/ulong for those. Also, the fields of target_elf_siginfo are ints. Use tswap32 to convert them. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: QEMU_INCLUDES are the same for all subtargetsPaolo Bonzini1-15/+13
Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure/Make: Build libfdt from submodule DTCPeter Crosthwaite2-5/+36
Configure to use the DTC submodule to build libfdt when no system libfdt is found. Prompt to install the DTC submodule if --enable-fdt is set but no DTC can be found. DTC has no out-of-tree build capability, so the configure will symlink the Makefile and scripts directory in the out of tree build directory and pass in all the needed DTC arguments to make out of tree build happen. Ideally we fix the DTC make to support out of tree, but did it this way to avoid commits to DTC. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18dtc: add submodulePeter Crosthwaite2-0/+3
Add dtc submodule as a fallback for old distros. Picking version 1.3.0. as this is the most recently tagged stable version. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: Put cross compile flags in EXTRA_CFLAGSPeter Crosthwaite1-6/+9
The cross compile CFLAGS are needed to properly build pixman (and any other submodules). Only the EXTRA_CFLAGS set is passed to submodules not QEMU_CFLAGS, so put the cross compile flags in EXTRA_CFLAGS instead. Signed-off-by: Peter Crosthwaite peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-17virtio-net: cleanup: init and exit function.KONRAD Frederic1-95/+22
This remove old init and exit function as they are no longer needed. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-8-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net: cleanup: use QOM cast.KONRAD Frederic2-68/+75
As the virtio-net-pci and virtio-net-s390 are switched to the new API, we can use QOM casts. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-7-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net-ccw: switch to the new API.KONRAD Frederic2-16/+28
Here the virtio-net-ccw is modified for the new API. The device virtio-net-ccw extends virtio-ccw-device as before. It creates and connects a virtio-net-device during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net-s390: switch to the new API.KONRAD Frederic2-12/+30
Here the virtio-net-s390 is modified for the new API. The device virtio-net-s390 extends virtio-s390-device as before. It creates and connects a virtio-net-device during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net-pci: switch to the new API.KONRAD Frederic2-60/+69
Here the virtio-net-pci is modified for the new API. The device virtio-net-pci extends virtio-pci. It creates and connects a virtio-net-device during the init. The properties are not changed. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net: add the virtio-net device.KONRAD Frederic5-20/+161
Create virtio-net-device which extends virtio-device, so it can be connected on virtio-bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio: add two functions to VirtioDeviceClass.KONRAD Frederic1-0/+12
Recent changes need two functions to VirtioDevice. This just add them into VirtioDeviceClass. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-2-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17Fix warnings suppressors to honor --disable-werrorMarkus Armbruster4-3/+8
Replace #pragma GCC diagnostic ignored FOO [Troublesome code...] #pragma GCC diagnostic error FOO by #pragma GCC diagnostic push #pragma GCC diagnostic ignored FOO [Troublesome code...] #pragma GCC diagnostic pop Broken in commit 3f4349d, commit 092bb30, and commit c95e308. Signed-off-by: Markus Armbruster <armbru@redhat.com> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366113066-1340-1-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17fw_cfg: add qtest test caseAnthony Liguori2-0/+143
This validates some basic characteristics of fw_cfg. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-8-git-send-email-aliguori@us.ibm.com
2013-04-17i440fx-test: add test for PAM functionalityAnthony Liguori1-1/+138
This tests PAM settings for the i440fx. This test does a lot of byte MMIO which is fairly slow with qtest today. But the test does complete in under 2 seconds. We don't fully emulate PAM largely because of limitations with KVM so we #if 0 that part of the test case. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-7-git-send-email-aliguori@us.ibm.com
2013-04-17i440fx-test: add test to compare default register valuesAnthony Liguori2-0/+150
This test compares all of the default register values against the spec. It turns out we deviate in quite a few places. These places are really only visible to the BIOS though which is why this hasn't created any problems. The deviation actually happens in the core PCI layer so I suspect it's not a simple fix if we really care to fix it. For now, just disable the affected checks. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-6-git-send-email-aliguori@us.ibm.com
2013-04-17libqos: add malloc supportAnthony Liguori4-0/+130
This is a very simple allocator for the PC platform. It should be possible to add backends for other platforms. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-5-git-send-email-aliguori@us.ibm.com
2013-04-17libqos: add fw_cfg supportAnthony Liguori5-2/+147
fw_cfg is needed to get the top of memory which is necessary for doing PCI allocation and allocating RAM for DMA. Add a PC version of fw_cfg and enough abstraction to support other platforms. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-4-git-send-email-aliguori@us.ibm.com
2013-04-17qtest: add libqos including PCI supportAnthony Liguori6-2/+495
This includes basic PCI support for the PC platform. Enough abstraction should be present to support non-PC platforms too. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-3-git-send-email-aliguori@us.ibm.com
2013-04-17qtest: don't use system command to avoid double forkAnthony Liguori1-7/+4
Currently we waitpid on the child process we spawn off that does nothing more than system() another process. While this does not appear to be incorrect, it's wasteful and confusing so get rid of it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-2-git-send-email-aliguori@us.ibm.com
2013-04-17migration: reflect incoming failure to shellEric Blake1-1/+1
Management apps like libvirt don't know to pay attention to stderr unless there is a non-zero exit status. * migration.c (process_incoming_migration_co): Exit with non-zero status on failure. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1366149041-626-1-git-send-email-eblake@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17qbus: remove wrong error messagesAlexey Kardashevskiy1-4/+2
The existing code shows the "Bus '%s' is full" message even if name is specified and different from bus->name (i.e. match=0). The patch excludes unnecessary error message. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-id: 1366184940-13516-1-git-send-email-aik@ozlabs.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17chardev: remove the headers of Memory chardev driverLei Li1-6/+0
Memory chardev driver is no longer used, and Commit: 4bf0bb8014ac2ac61b1004f5d92b2a4594d48017 has droped it but the headers, so clean it up. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Message-id: 1366188414-24214-1-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17Merge remote-tracking branch 'bonzini/migration-writev' into stagingAnthony Liguori2-69/+149
# By Paolo Bonzini # Via Paolo Bonzini * bonzini/migration-writev: qemu-file: do not use stdio for qemu_fdopen iov: handle partial writes from sendmsg and recvmsg iov: reorganize iov_send_recv, part 3 iov: reorganize iov_send_recv, part 2 iov: reorganize iov_send_recv, part 1 qemu-file: drop socket_put_buffer Message-id: 1366192012-14872-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17qemu-file: do not use stdio for qemu_fdopenPaolo Bonzini1-11/+90
This uses system calls directly for Unix file descriptors, so that the efficient writev_buffer can be used. Pay attention to the possibility of partial writes in writev. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-17iov: handle partial writes from sendmsg and recvmsgPaolo Bonzini1-47/+55
Partial writes can still happen in sendmsg and recvmsg, if a signal is received in the middle of a write. To handle this, retry the operation with a new offset/bytes pair. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-17iov: reorganize iov_send_recv, part 3Paolo Bonzini1-15/+15
"si" and "ei" are merged in a single variable. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-17iov: reorganize iov_send_recv, part 2Paolo Bonzini1-14/+14
Do not touch the "bytes" argument anymore. Instead, remember the original length of the last iovec if we touch it, and restore it afterwards. This requires undoing the changes in opposite order. The previous algorithm didn't care. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-17iov: reorganize iov_send_recv, part 1Paolo Bonzini1-7/+13
Once the initial part of the iov is dropped, it is not used anymore. Modify iov/iovcnt directly instead of adjusting them with the "si" variable. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-28 19:00:00 +0000