| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On success, pci_add_capability2() returns a positive value. On
failure, it sets an error and return a negative value.
pci_add_capability() laboriously checks this behavior. No other
caller does. Drop the checks from pci_add_capability().
Cc: mst@redhat.com
Cc: marcel@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The VT-d spec (section 6.5.2) prescribes software to zero the
Invalidation Queue Tail Register before enabling the VTD_GCMD_QIE
Global Command Register bit. Windows Server 2012 R2 and possibly
other older Windows versions violate the protocol and set a
non-zero queue tail first, which in effect makes them crash early
on boot with -device intel-iommu,intremap=on.
This commit relaxes the check and instead of failing to enable
VTD_GCMD_QIE with vtd_err_qi_enable, it behaves as if the tail
register was set just after enabling VTD_GCMD_QIE
(see vtd_handle_iqt_write).
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This way the bridge shows up in the correct section of the
"-device help" text.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
This patch enables the virtio-net tx queue size to be configurable
between 256 (the default queue size) and 1024 by the user when the
vhost-user backend is used.
Currently, the maximum tx queue size for other backends is 512 due
to the following limitations:
- QEMU backend: the QEMU backend implementation in some cases may
send 1024+1 iovs to writev.
- Vhost_net backend: there are possibilities that the guest sends
a vring_desc of memory which crosses a MemoryRegion thereby
generating more than 1024 iovs after translation from guest-physical
address in the backend.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Queued TCG patches
# gpg: Signature made Fri 30 Jun 2017 20:03:53 BST
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-tcg-20170603:
tcg: consistently access cpu->tb_jmp_cache atomically
gen-icount: use tcg_ctx.tcg_env instead of cpu_env
gen-icount: add missing inline to gen_tb_end
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Some code paths can lead to atomic accesses racing with memset()
on cpu->tb_jmp_cache, which can result in torn reads/writes
and is undefined behaviour in C11.
These torn accesses are unlikely to show up as bugs, but from code
inspection they seem possible. For example, tb_phys_invalidate does:
/* remove the TB from the hash list */
h = tb_jmp_cache_hash_func(tb->pc);
CPU_FOREACH(cpu) {
if (atomic_read(&cpu->tb_jmp_cache[h]) == tb) {
atomic_set(&cpu->tb_jmp_cache[h], NULL);
}
}
Here atomic_set might race with a concurrent memset (such as the
ones scheduled via "unsafe" async work, e.g. tlb_flush_page) and
therefore we might end up with a torn pointer (or who knows what,
because we are under undefined behaviour).
This patch converts parallel accesses to cpu->tb_jmp_cache to use
atomic primitives, thereby bringing these accesses back to defined
behaviour. The price to pay is to potentially execute more instructions
when clearing cpu->tb_jmp_cache, but given how infrequently they happen
and the small size of the cache, the performance impact I have measured
is within noise range when booting debian-arm.
Note that under "safe async" work (e.g. do_tb_flush) we could use memset
because no other vcpus are running. However I'm keeping these accesses
atomic as well to keep things simple and to avoid confusing analysis
tools such as ThreadSanitizer.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1497486973-25845-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
We are relying on cpu_env being defined as a global, yet most
targets (i.e. all but arm/a64) have it defined as a local variable.
Luckily all of them use the same "cpu_env" name, but really
compilation shouldn't break if the name of that local variable
changed.
Fix it by using tcg_ctx.tcg_env, which all targets set in their
translate_init function. This change also helps paving the way
for the upcoming "translation loop common to all targets" work.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1497639397-19453-3-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1497639397-19453-2-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
# gpg: Signature made Fri 30 Jun 2017 15:08:45 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-pull-request:
block: Exploit BDRV_BLOCK_EOF for larger zero blocks
block: Add BDRV_BLOCK_EOF to bdrv_get_block_status()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/vivier/tags/m68k-for-2.10-pull-request' into staging
# gpg: Signature made Fri 30 Jun 2017 13:30:44 BST
# gpg: using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier/tags/m68k-for-2.10-pull-request:
target/m68k: add fmovem
target/m68k: add explicit single and double precision operations (part 2)
target/m68k: add fsglmul and fsgldiv
softfloat: define floatx80_round()
target/m68k: add explicit single and double precision operations
target/m68k: add fmovecr
target/m68k: add fscc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When we have a BDS with unallocated clusters, but asking the status
of its underlying bs->file or backing layer encounters an end-of-file
condition, we know that the rest of the unallocated area will read as
zeroes. However, pre-patch, this required two separate calls to
bdrv_get_block_status(), as the first call stops at the point where
the underlying file ends. Thanks to BDRV_BLOCK_EOF, we can now widen
the results of the primary status if the secondary status already
includes BDRV_BLOCK_ZERO.
In turn, this fixes a TODO mentioned in iotest 154, where we can now
see that all sectors in a partial cluster at the end of a file read
as zero when coupling the shorter backing file's status along with our
knowledge that the remaining sectors came from an unallocated cluster.
Also, note that the loop in bdrv_co_get_block_status_above() had an
inefficent exit: in cases where the active layer sets BDRV_BLOCK_ZERO
but does NOT set BDRV_BLOCK_ALLOCATED (namely, where we know we read
zeroes merely because our unallocated clusters lie beyond the backing
file's shorter length), we still ended up probing the backing layer
even though we already had a good answer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
Just as the block layer already sets BDRV_BLOCK_ALLOCATED as a
shortcut for subsequent operations, there are also some optimizations
that are made easier if we can quickly tell that *pnum will advance
us to the end of a file, via a new BDRV_BLOCK_EOF which gets set
by the block layer.
This just plumbs up the new bit; subsequent patches will make use
of it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-2-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
staging
# gpg: Signature made Fri 30 Jun 2017 12:46:17 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
virtio-pci: use ioeventfd even when KVM is disabled
tests: fix virtio-net-test ISR dependence
tests: fix virtio-blk-test ISR dependence
tests: fix virtio-scsi-test ISR dependence
libqos: add virtio used ring support
libqos: fix typo in virtio.h QVirtQueue->used comment
virtio-blk: trace vdev so devices can be distinguished
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
ppc patch queue 2017-06-30
* More DRC cleanups, these now actually fix a few bugs
* Properly implements the openpic timers (they now count and
generate interrupts)
* Fixes for XICS migration
* Fixes for migration of POWER9 RPT guests
* The last of the compatibility mode rework
# gpg: Signature made Fri 30 Jun 2017 10:52:25 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170630: (21 commits)
spapr: Clean up DRC set_isolation_state() path
spapr: Clean up DRC set_allocation_state path
spapr: Make DRC reset force DRC into known state
spapr: Split DRC release from DRC detach
spapr: Eliminate DRC 'signalled' state variable
spapr: Start hotplugged PCI devices in ISOLATED state
target-ppc: Enable open-pic timers to count and generate interrupts
hw/ppc/spapr.c: consecutive 'spapr->patb_entry = 0' statements
spapr: prevent QEMU crash when CPU realization fails
target/ppc: Proper cleanup when ppc_cpu_realizefn fails
spapr: fix migration of ICPState objects from/to older QEMU
xics: directly register ICPState objects to vmstate
target/ppc: Fix return value in tcg radix mmu fault handler
target/ppc/excp_helper: Take BQL before calling cpu_interrupt()
spapr: Fix migration of Radix guests
spapr: Add a "no HPT" encoding to HTAB migration stream
ppc: Rework CPU compatibility testing across migration
pseries: Reset CPU compatibility mode
pseries: Move CPU compatibility property to machine
qapi: add explicit null to string input and output visitors
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Old kvm.ko versions only supported a tiny number of ioeventfds so
virtio-pci avoids ioeventfds when kvm_has_many_ioeventfds() returns 0.
Do not check kvm_has_many_ioeventfds() when KVM is disabled since it
always returns 0. Since commit 8c56c1a592b5092d91da8d8943c17777d6462a6f
("memory: emulate ioeventfd") it has been possible to use ioeventfds in
qtest or TCG mode.
This patch makes -device virtio-blk-pci,iothread=iothread0 work even
when KVM is disabled.
I have tested that virtio-blk-pci works under TCG both with and without
iothread.
This patch fixes qemu-iotests 068, which was accidentally merged early
despite the dependency on ioeventfd.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-7-stefanha@redhat.com
Message-id: 20170615163813.7255-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Existing tests do not touch the virtqueue used ring. Instead they poll
the virtqueue ISR register and peek into their request's device-specific
status field.
It turns out that the virtqueue ISR register can be set to 1 more than
once for a single notification (see commit
83d768b5640946b7da55ce8335509df297e2c7cd "virtio: set ISR on dataplane
notifications"). This causes problems for tests that assume a 1:1
correspondence between the ISR being 1 and request completion.
Peeking at device-specific status fields is also problematic if the
device has no field that can be abused for EINPROGRESS polling
semantics. This is the case if all the field's values may be set by the
device; there's no magic constant left for polling.
It's time to process the used ring for completed requests, just like a
real virtio guest driver. This patch adds the necessary APIs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
There are substantial differences in the various paths through
set_isolation_state(), both for setting to ISOLATED versus UNISOLATED
state and for logical versus physical DRCs.
So, split the set_isolation_state() method into isolate() and unisolate()
methods, and give it different implementations for the two DRC types.
Factor some minimal common checks, including for valid indicator values
(which we weren't previously checking) into rtas_set_isolation_state().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
The allocation-state indicator should only actually be implemented for
"logical" DRCs, not physical ones. Factor a check for this, and also for
valid indicator state values into rtas_set_allocation_state(). Because
they don't exist for physical DRCs, there's no reason that we'd ever want
more than one method implementation, so it can just be a plain function.
In addition, the setting to USABLE and setting to UNUSABLE paths in
set_allocation_state() don't actually have much in common. So, split the
method separate functions for each parameter value (drc_set_usable()
and drc_set_unusable()).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
The reset handler for DRCs attempts several state transitions which are
subject to various checks and restrictions. But at reset time we know
there is no guest, so we can ignore most of the usual sequencing rules and
just set the DRC back to a known state. In fact, it's safer to do so.
The existing code also has several redundant checks for
drc->awaiting_release inside a block which has already tested that. This
patch removes those and sets the DRC to a fixed initial state based only
on whether a device is currently plugged or not.
With DRCs correctly reset to a state based on device presence, we don't
need to force state transitions as cold plugged devices are processed.
This allows us to remove all the callers of the set_*_state() methods from
outside spapr_drc.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
spapr_drc_detach() is called when qemu generic code requests a device be
unplugged. It makes a number of tests, which could well delay further
action until later, before actually detach the device from the DRC.
This splits out the part which actually removes the device from the DRC
into spapr_drc_release(). This will be useful for further cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
The 'signalled' field in the DRC appears to be entirely a torturous
workaround for the fact that PCI devices were started in UNISOLATED state
for unclear reasons.
1) 'signalled' is already meaningless for logical (so far, all non PCI)
DRCs. It's always set to true (at least at any point it might be tested),
and can't be assigned any real meaning due to the way signalling works for
logical DRCs.
2) For PCI DRCs, the only time signalled would be false is when non-zero
functions of a multifunction device are hotplugged, followed by function
zero (the other way around is explicitly not permitted). In that case the
secondary function DRCs are attached, but the notification isn't sent to
the guest until function 0 is plugged.
3) signalled being false is used to allow a DRC detach to switch mode
back to ISOLATED state, which allows a secondary function to be hotplugged
then unplugged with function 0 never inserted. Without this a secondary
function starting in UNISOLATED state couldn't be detached again without
function 0 being inserted, all the functions configured by the guest, then
sent back to ISOLATED state.
4) But now that PCI DRCs start in ISOLATED state, there's nothing to be
done. If the guest doesn't get the notification, it won't switch the
device to UNISOLATED state, so nothing prevents it from being unplugged.
If the guest does move it to UNISOLATED state without the signal (due to
a manual drmgr call, for instance) then it really isn't safe to unplug it.
So, this patch removes the signalled variable and all code related to it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
PCI DRCs, and only PCI DRCs, are immediately moved to UNISOLATED isolation
state once the device is attached. This has been there from the initial
implementation, and it's not clear why.
The state diagram in PAPR 13.4 suggests PCI devices should start in
ISOLATED state until the guest moves them into UNISOLATED, and the code in
the guest-side drmgr tool seems to work that way too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Previously QEMU open-pic implemented the 4 open-pic timers including
all timer registers, but the timers did not "count" or generate any
interrupts. The patch makes the timers both count and generate
interrupts. The timer clock frequency is fixed at 25MHZ.
--
Responding to V2 patch comments.
- Simplify clock frequency logic and commentary.
- Remove camelCase variables.
- Timer objects now created at init rather than lazily.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
In ppc_spapr_reset(), if the guest is using HPT, the code was executing:
} else {
spapr->patb_entry = 0;
spapr_setup_hpt_and_vrma(spapr);
}
And, at the end of spapr_setup_hpt_and_vrma:
/* We're setting up a hash table, so that means we're not radix */
spapr->patb_entry = 0;
Resulting in spapr->patb_entry being assigned to 0 twice in a row.
Given that 'spapr_setup_hpt_and_vrma' is also called inside
'spapr_check_setup_free_hpt' of spapr_hcall.c, this trivial patch removes
the 'patb_entry = 0' assignment from the 'else' clause inside ppc_spapr_reset
to avoid this behavior.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
ICPState objects were being allocated before CPU thread realization.
However commit 9ed656631d73 (xics: setup cpu at realize time) reversed it
by allocating ICPState objects after CPU thread is realized. But it
didn't take care to fix the error path because of which we observe
a SIGSEGV when CPU thread realization fails during cold/hotplug.
Fix this by ensuring that we do object_unparent() of ICPState object
only in case when is was created earlier.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
If ppc_cpu_realizefn() fails after cpu_exec_realizefn() has been
called, we will have to undo whatever cpu_exec_realizefn() did
by explicitly calling cpu_exec_unrealizeffn() which is currently
missing. Failure to do this proper cleanup will result in CPU
which was never fully realized to linger on the cpus list causing
SIGSEGV later (for eg when running "info cpus").
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Commit 5bc8d26de20c ("spapr: allocate the ICPState object from under
sPAPRCPUCore") moved ICPState objects from the machine to CPU cores.
This is an improvement since we no longer allocate ICPState objects
that will never be used. But it has the side-effect of breaking
migration of older machine types from older QEMU versions.
This patch allows spapr to register dummy "icp/server" entries to vmstate.
These entries use a dedicated VMStateDescription that can swallow and
discard state of an incoming migration stream, and that don't send anything
on outgoing migration.
As for real ICPState objects, the instance_id is the cpu_index of the
corresponding vCPU, which happens to be equal to the generated instance_id
of older machine types.
The machine can unregister/register these entries when CPUs are dynamically
plugged/unplugged.
This is only available for pseries-2.9 and older machines, thanks to a
compat property.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The ICPState objects are currently registered to vmstate as qdev objects.
Their instance ids are hence computed automatically in the migration code,
and thus depends on the order the CPU cores were plugged.
If the destination had its CPU cores plugged in a different order than the
source, then ICPState objects will have different instance_ids and load
the wrong state.
Since CPU objects have a reliable cpu_index which is already used as
instance_id in vmstate, let's use it for ICPState as well.
Please note that this doesn't break migration. Older machine types used to
allocate and realize all ICPState objects at machine init time, for the whole
lifetime of the machine. The qdev instance ids are thus 0,1,2... nr_servers
and happen to map to the vCPU indexes.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The mmu fault handler should return 0 if it was able to successfully
handle the fault and a positive value otherwise.
Currently the tcg radix mmu fault handler will return 1 after
successfully handling a fault in virtual mode. This is incorrect
so fix it so that it returns 0 in this case.
The handler already correctly returns 0 when a fault was handled
in real mode and 1 if an interrupt was generated.
Fixes: d5fee0bbe68d ("target/ppc: Implement ISA V3.00 radix page fault handler")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Since the introduction of MTTCG, using the msgsnd instruction
abort()s if being called without holding the BQL. So let's protect
that part of the code now with qemu_mutex_lock_iothread().
Buglink: https://bugs.launchpad.net/qemu/+bug/1694998
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Fix migration of radix guests by ensuring that we issue
KVM_PPC_CONFIGURE_V3_MMU for radix case post migration.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Add a "no HPT" encoding (using value -1) to the HTAB migration
stream (in the place of HPT size) when the guest doesn't allocate HPT.
This will help the target side to match target HPT with the source HPT
and thus enable successful migration.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Migrating between different CPU versions is a bit complicated for ppc.
A long time ago, we ensured identical CPU versions at either end by
checking the PVR had the same value. However, this breaks under KVM
HV, because we always have to use the host's PVR - it's not
virtualized. That would mean we couldn't migrate between hosts with
different PVRs, even if the CPUs are close enough to compatible in
practice (sometimes identical cores with different surrounding logic
have different PVRs, so this happens in practice quite often).
So, we removed the PVR check, but instead checked that several flags
indicating supported instructions matched. This turns out to be a bad
idea, because those instruction masks are not architected information, but
essentially a TCG implementation detail. So changes to qemu internal CPU
modelling can break migration - this happened between qemu-2.6 and
qemu-2.7. That was addressed by 146c11f1 "target-ppc: Allow eventual
removal of old migration mistakes".
Now, verification of CPU compatibility across a migration basically doesn't
happen. We simply ignore the PVR of the incoming migration, and hope the
cpu on the destination is close enough to work.
Now that we've cleaned up handling of processor compatibility modes
for pseries machine type, we can do better. For new machine types
(pseries-2.10+) We allow migration if:
* The source and destination PVRs are for the same type of CPU, as
determined by CPU class's pvr_match function
OR * When the source was in a compatibility mode, and the destination CPU
supports the same compatibility mode
For older machine types we retain the existing behaviour - current CAS
code will usually set a compat mode which would break backwards
migration if we made them use the new behaviour. [Fixed from an
earlier version by Greg Kurz].
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
|
|
Currently, the CPU compatibility mode is set when the cpu is initialized,
then again when the guest negotiates features. This means if a guest
negotiates a compatibility mode, then reboots, that compatibility mode
will be retained across the reset.
Usually that will get overridden when features are negotiated on the next
boot, but it's still not really correct. This patch moves the initial set
up of the compatibility mode from cpu init to reset time. The mode *is*
retained if the reboot was caused by the feature negotiation (it might
be important in that case, though it's unlikely).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
|
|
Server class POWER CPUs have a "compat" property, which is used to set the
backwards compatibility mode for the processor. However, this only makes
sense for machine types which don't give the guest access to hypervisor
privilege - otherwise the compatibility level is under the guest's control.
To reflect this, this removes the CPU 'compat' property and instead
creates a 'max-cpu-compat' property on the pseries machine. Strictly
speaking this breaks compatibility, but AFAIK the 'compat' option was
never (directly) used with -device or device_add.
The option was used with -cpu. So, to maintain compatibility, this
patch adds a hack to the cpu option parsing to strip out any compat
options supplied with -cpu and set them on the machine property
instead of the now deprecated cpu property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Andrea Bolognani <abologna@redhat.com>
|
|
This may be used for deprecated object properties that are kept for
backwards compatibility.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When using the 40p machine, soundhw_init() is currently called twice,
one time from vl.c and one time from ibm_40p_init(). The call in
ibm_40p_init() was likely just a copy-and-paste from a old version
of the prep machine - but there the call to audio_init() (which was
the previous name of this function) has been removed many years ago
already, with commit b3e6d591b05538056d665572f3e3bbfb3cbb70e7
("audio: enable PCI audio cards for all PCI-enabled targets"), so
we certainly also do not need the soundhw_init() in the 40p function
anymore nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Sahid Ferdjaoui <sferdjao@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-8-laurent@vivier.eu>
|
|
Add fsabs, fdabs, fsneg, fdneg, fsmove and fdmove.
The value is converted using the new floatx80_round() function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-7-laurent@vivier.eu>
|
|
fsglmul and fsgldiv truncate data to single precision before computing
results.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-6-laurent@vivier.eu>
|
|
Add a function to round a floatx80 to the defined precision
(floatx80_rounding_precision)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170628204241.32106-5-laurent@vivier.eu>
|
|
Add fssqrt, fdsqrt, fsadd, fdadd, fssub, fdsub, fsmul, fdmul,
fsdiv, fddiv.
The precision is managed using set_floatx80_rounding_precision().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-4-laurent@vivier.eu>
|
|
fmovecr moves a floating point constant from the
FPU ROM to a floating point register.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170628204241.32106-3-laurent@vivier.eu>
|
|
use DisasCompare with FPU conditions in fscc and fbcc.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-2-laurent@vivier.eu>
|
|
staging
HMP pull 2017-06-29
# gpg: Signature made Thu 29 Jun 2017 17:27:55 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-hmp-20170629:
Add chardev-send-break monitor command
monitor: Add -a (all) option to info registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use 'send a break' in all 3 pieces of text as suggested by eblake
|
