aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-06-10tcg-i386: remove use of _Bool that slipped code reviewAurelien Jarno1-1/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10esp: lower IRQ on soft resetBlue Swirl1-5/+14
42f1ced228c9b616cfa2b69846025271618e4ef5 removed irq lowering during reset. However, for chip reset command and DMA reset signal, its actually the correct thing to do. Lower IRQ on soft reset only. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10qbus: fix memory leak in qbus_free()Isaku Yamahata1-0/+1
BusState::name is allocated in qbus_create_inplace(). So it should be freed by qbus_free(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10multiboot: compilation fix with DEBUG_MULTIBOOT enabled.Isaku Yamahata1-4/+5
This patch fixes the following compilation errors in multiboot.c when DEBUG_MULTIBOOT is defined. Use TARGET_FMT_plx instead of %x for target_phys_addr_t. CC i386-softmmu/multiboot.o cc1: warnings being treated as errors qemu/hw/multiboot.c: In function 'mb_add_mod': qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 4 has type 'target_phys_addr_t' qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t' qemu/hw/multiboot.c: In function 'load_multiboot': qemu/hw/multiboot.c:279: error: format '%#x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t' qemu/hw/multiboot.c:307: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t' qemu/hw/multiboot.c:308: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t' make[1]: *** [multiboot.o] Error 1 Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10vga-isa-mm: remove one #ifdef CONFIG_BOCHS_VBE.Isaku Yamahata1-5/+1
remove one #ifdef CONFIG_BOCHS_VBE. Call vga_init_vbe() instead. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10main: allocate gui_timer only once.Isaku Yamahata1-0/+1
fix memory leak. there is no need to allocate more than one gui_timer. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori2-14/+19
2010-06-10cris: Break out image loading to hw/cris-boot.c.Edgar E. Iglesias6-94/+137
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
2010-06-10s390: Disassemble some general-instruction-extension insns.Richard Henderson1-8/+81
The full general-instruction-extension facility was added to binutils after the change to GPLv3. This is not the entire extension, just what we're using in TCG. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10s390: Update disassembler to the last GPLv2 from binutils.Richard Henderson1-30/+49
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10tcg-i386: Merge 64-bit generation.Richard Henderson5-1876/+889
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: display sysconfdir in summaryAurelien Jarno1-0/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10move computation of tools and roms outside of config-host.mak generationPaolo Bonzini1-19/+21
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: move directory defaults earlierPaolo Bonzini1-33/+14
Unify with existing special-purpose configure code for win32. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: ignore unknown --xyzdir optionsPaolo Bonzini1-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: introduce more --xyzdir optionsPaolo Bonzini1-5/+21
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: expand ${prefix} in create_configPaolo Bonzini3-3/+11
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: move all directory entries in config-host.mak closePaolo Bonzini1-7/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: unify handling of xyzdir variablesPaolo Bonzini1-8/+12
Making an xyzdir variable for each directory prepares for the next patches introducing config-host.h defines and configure options for them. It also fixes the problem where overriding prefix at "make install" time did not override it for sysconfdir. Removes some of the differences between sysconfdir and other variables, the rest will go away later. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10rename CONFIG_QEMU_PREFIXPaolo Bonzini3-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: introduce confdir and confsuffixPaolo Bonzini1-6/+4
confsuffix was write-only, flesh it out. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: introduce sysconfsuffixPaolo Bonzini1-6/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: delete duplicate create_config case stanzaPaolo Bonzini1-5/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: dyngen is long time gonePaolo Bonzini1-1/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: avoid using exprPaolo Bonzini1-2/+9
Just a personal preference against duplicating hieroglyphics. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: bail out early on invalid -cpu optionPaolo Bonzini1-5/+2
It would fail later anyway. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: remove some bashismsAurelien Jarno1-2/+2
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: Fix compilationStefan Weil1-1/+1
TCGv t1 needs tcg_temp_free instead of tcg_temp_free_i32. Cc: Nathan Froyd <froydnj@codesourcery.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09hw: honor low bit in mipssim machineNathan Froyd1-1/+4
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09linux-user: honor low bit of entry PC for MIPSNathan Froyd1-1/+4
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: add microMIPS exception handler supportNathan Froyd2-6/+16
Unlike MIPS16, microMIPS lets you choose the ISA mode for your exception handlers. The ISA mode is selectable via a user-writable CP0.Config3 flag. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: microMIPS ASE supportNathan Froyd4-5/+2531
Add instruction decoding for the microMIPS ASE. All we do is decode and then forward to the existing gen_* routines. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: mips16 cleanupsNathan Froyd1-7/+17
Change code handling mips16-specific branches to use ISA-neutral special opcodes. Since there are several places where the delay slot requirements for microMIPS branches differ from mips16 branches, using opcodes is easier than checking hflags, then checking mips16 vs. microMIPS. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: refactor c{, abs}.cond.fmt insnsNathan Froyd1-83/+81
Move all knowledge about coprocessor-checking and register numbering into the gen_cmp* helper functions. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: move FP FMT comments closer to the definitionsAurelien Jarno1-14/+14
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: define constants for magic numbersNathan Froyd1-142/+295
Add FMT_* constants for the floating-point format field in opcodes and tweak a few places to use them. Add enums for various invocations of FOP and tweak gen_farith and its lone caller accordingly. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09tcg: get rid of DEF2 in tcg-opc.hAurelien Jarno3-150/+149
Now that tcg-opc.h is only used in TCG code, get rid of DEF2 in tcg-opc.h. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09tcg: get rid of copy_size in TCGOpDefAurelien Jarno6-22/+4
copy_size is a left-over from the dyngen era, remove it. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09Fix multiboot compilationAlexander Graf2-12/+28
Commit dd4239d6574ca41c94fc0d0f77ddc728510ffc57 broke multiboot. It replaced the instruction "rep insb (%dx), %es:(%edi)" by the binary output of "addr32 rep insb (%dx), %es:(%di)". Linuxboot calls the respective helper function in a code16 section. So the original instruction was automatically translated to its "addr32" equivalent. For multiboot, we're running in code32 so gcc didn't add the "addr32" which breaks the instruction. This patch splits that helper function in one which uses addr32 and one which does not, so everyone's happy. The good news is that nobody probably cared so far. The bundled multiboot.bin binary was built before the change and is thus correct. Please also put this patch into -stable. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09net: Fix hotplug with pci_addAmit Shah1-2/+5
The correct model type wasn't getting added when hotplugging nics with pci_add. Testcase: start VM with default nic type. In the qemu_monitor: (qemu) pci_add auto nic model=virtio This results in a nic hot-plug of the same nic type as the default. This was broken in 5294e2c774f120e10b44652ac143abda356f44eb Also changes the behaviour where no .init is defined for a net_client_type. Previously, 0 was returned, which indicated the init was successful and that 0 was the index into the nd_tables[] array. Return -1, indicating unsuccessful init, in such a case. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-09tcg: Make some tcg-target.c routines static.Richard Henderson12-23/+22
Both tcg_target_init and tcg_target_qemu_prologue are unused outside of tcg.c. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09tcg: Add TYPE parameter to tcg_out_mov.Richard Henderson12-123/+122
Mirror tcg_out_movi in having a TYPE parameter. This allows x86_64 to perform the move at the proper width, which may elide a REX prefix. Introduce a TCG_TYPE_REG enumerator to represent the "native width" of the host register, and to distinguish the usage from "pointer data" as represented by the existing TCG_TYPE_PTR. Update all targets to match. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-08target-mips: break out [ls][wd]c1 and rdhwr insn generationNathan Froyd1-47/+59
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-08Fix --enable-user-pie compilation.Richard Henderson1-0/+3
We forgot to propagate -fpie to the libdis-user directory. Signed-off-by: Richard Henderson <rth@twiddle.net> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-07virtio-net: truncating packetMichael S. Tsirkin1-6/+9
virtio net attempts to peek into virtio queue to determine that we have enough space for the complete packet to fit. However, it fails to account for space consumed by virtio net header when it does this, under stress this results in a failure with the message 'truncating packet'. redhat bz 591494. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-07microblaze: Make MSR_UM and MSR_VM part of the tb flagsEdgar E. Iglesias1-4/+3
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-06-07petlogix-3adsp: Tweak displacement of cmdline and fdt blob.Edgar E. Iglesias1-2/+2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-06-04migration-exec: fix OpenBSD build warningBlue Swirl1-0/+2
Add include directives to get WIFEXITED() and WEXITSTATUS() macros defined. Fixes warnings: CC migration-exec.o /src/qemu/migration-exec.c: In function `exec_close': /src/qemu/migration-exec.c:53: warning: implicit declaration of function `WIFEXITED' /src/qemu/migration-exec.c:54: warning: implicit declaration of function `WEXITSTATUS' Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-04target-i386: fix decoding of negative 4-byte displacementsPaolo Bonzini1-1/+1
Negative four byte displacements need to be sign-extended after c086b783eb7a578993d6d2ab62c4c2666800b63d. Do so. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-03Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori12-118/+414
generated by cgit v1.1 at 2024-08-12 03:49:02 +0000