aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-12target/m68k: remove useless qregs arrayLaurent Vivier1-4/+0
They are unused since the target has been converted to TCG. Fixes: e1f3808e03f7 ("Convert m68k target to TCG.") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201022203000.1922749-2-laurent@vivier.eu>
2020-12-12hw/m68k/q800.c: Make the GLUE chip an actual QOM devicePeter Maydell1-12/+70
The handling of the GLUE (General Logic Unit) device is currently open-coded. Make this into a proper QOM device. This minor piece of modernisation gets rid of the free floating qemu_irq array 'pic', which Coverity points out is technically leaked when we exit the machine init function. (The replacement glue device is not leaked because it gets added to the sysbus, so it's accessible via that.) Fixes: Coverity CID 1421883 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201106235109.7066-3-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-12hw/m68k/q800: Don't connect two qemu_irqs directly to the same inputPeter Maydell2-2/+11
The q800 board code connects both of the IRQ outputs of the ESCC to the same pic[3] qemu_irq. Connecting two qemu_irqs outputs directly to the same input is not valid as it produces subtly wrong behaviour (for instance if both the IRQ lines are high, and then one goes low, the PIC input will see this as a high-to-low transition even though the second IRQ line should still be holding it high). This kind of wiring needs an explicitly created OR gate; add one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201106235109.7066-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-12Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell113-265/+1841
Block layer patches: - Support for FUSE exports - Fix deadlock in bdrv_co_yield_to_drain() - Use lock guard macros - Some preparational patches for 64 bit block layer - file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes() # gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (34 commits) block: Fix deadlock in bdrv_co_yield_to_drain() block: Fix locking in qmp_block_resize() block: Simplify qmp_block_resize() error paths block: introduce BDRV_MAX_LENGTH block/io: bdrv_check_byte_request(): drop bdrv_is_inserted() block/io: bdrv_refresh_limits(): use ERRP_GUARD block/file-posix: fix workaround in raw_do_pwrite_zeroes() can-host: Fix crash when 'canbus' property is not set iotests/221: Discard image before qemu-img map file-posix: check the use_lock before setting the file lock iotests/308: Add test for FUSE exports iotests: Enable fuse for many tests iotests: Allow testing FUSE exports iotests: Give access to the qemu-storage-daemon storage-daemon: Call bdrv_close_all() on exit iotests/287: Clean up subshell test image iotests: Let _make_test_img guess $TEST_IMG_FILE iotests: Restrict some Python tests to file iotests/091: Use _cleanup_qemu instad of "wait" iotests: Derive image names from $TEST_IMG ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20201211' into stagingPeter Maydell4-2/+107
First set of 6.0 patches for s390x: - acceptance test for device detection - bugfixes # gpg: Signature made Fri 11 Dec 2020 12:21:45 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20201211: s390x/cpu: Use timer_free() in the finalize function to avoid memleaks tests/acceptance: test s390x zpci fid propagation tests/acceptance: verify s390x device detection tests/acceptance: test virtio-ccw revision handling tests/acceptance: add a test for devices on s390x hw/watchdog/wdt_diag288: Remove unnecessary includes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11Merge remote-tracking branch 'remotes/kraxel/tags/ui-20201211-pull-request' ↵Peter Maydell5-28/+49
into staging ui/console ui_info tweaks. ui/vnc: alpha cursor support. ui/vnc: locking fixes. ui/sdl: add extra mouse buttons. # gpg: Signature made Fri 11 Dec 2020 09:12:39 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20201211-pull-request: sdl2: Add extra mouse buttons ui/vnc: Add missing lock for send_color_map vnc: add alpha cursor support vnc: add pseudo encodings vnc: drop unused copyrect feature vnc: use enum for features console: allow con==NULL in dpy_{get, set}_ui_info and dpy_ui_info_supported console: drop qemu_console_get_ui_info Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11block: Fix deadlock in bdrv_co_yield_to_drain()Kevin Wolf1-17/+24
If bdrv_co_yield_to_drain() is called for draining a block node that runs in a different AioContext, it keeps that AioContext locked while it yields and schedules a BH in the AioContext to do the actual drain. As long as executing the BH is the very next thing that the event loop of the node's AioContext does, this actually happens to work, but when it tries to execute something else that wants to take the AioContext lock, it will deadlock. (In the bug report, this other thing is a virtio-scsi device running virtio_scsi_data_plane_handle_cmd().) Instead, always drop the AioContext lock across the yield and reacquire it only when the coroutine is reentered. The BH needs to unconditionally take the lock for itself now. This fixes the 'block_resize' QMP command on a block node that runs in an iothread. Cc: qemu-stable@nongnu.org Fixes: eb94b81a94bce112e6b206df846c1551aaf6cab6 Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1903511 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201203172311.68232-4-kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block: Fix locking in qmp_block_resize()Kevin Wolf1-1/+4
The drain functions assume that we hold the AioContext lock of the drained block node. Make sure to actually take the lock. Cc: qemu-stable@nongnu.org Fixes: eb94b81a94bce112e6b206df846c1551aaf6cab6 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201203172311.68232-3-kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block: Simplify qmp_block_resize() error pathsKevin Wolf1-5/+4
The only thing that happens after the 'out:' label is blk_unref(blk). However, blk = NULL in all of the error cases, so instead of jumping to 'out:', we can just return directly. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201203172311.68232-2-kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block: introduce BDRV_MAX_LENGTHVladimir Sementsov-Ogievskiy8-14/+90
We are going to modify block layer to work with 64bit requests. And first step is moving to int64_t type for both offset and bytes arguments in all block request related functions. It's mostly safe (when widening signed or unsigned int to int64_t), but switching from uint64_t is questionable. So, let's first establish the set of requests we want to work with. First signed int64_t should be enough, as off_t is signed anyway. Then, obviously offset + bytes should not overflow. And most interesting: (offset + bytes) being aligned up should not overflow as well. Aligned to what alignment? First thing that comes in mind is bs->bl.request_alignment, as we align up request to this alignment. But there is another thing: look at bdrv_mark_request_serialising(). It aligns request up to some given alignment. And this parameter may be bdrv_get_cluster_size(), which is often a lot greater than bs->bl.request_alignment. Note also, that bdrv_mark_request_serialising() uses signed int64_t for calculations. So, actually, we already depend on some restrictions. Happily, bdrv_get_cluster_size() returns int and bs->bl.request_alignment has 32bit unsigned type, but defined to be a power of 2 less than INT_MAX. So, we may establish, that INT_MAX is absolute maximum for any kind of alignment that may occur with the request. Note, that bdrv_get_cluster_size() is not documented to return power of 2, still bdrv_mark_request_serialising() behaves like it is. Also, backup uses bdi.cluster_size and is not prepared to it not being power of 2. So, let's establish that Qemu supports only power-of-2 clusters and alignments. So, alignment can't be greater than 2^30. Finally to be safe with calculations, to not calculate different maximums for different nodes (depending on cluster size and request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30) as absolute maximum bytes length for Qemu. Actually, it's not much less than INT64_MAX. OK, then, let's apply it to block/io. Let's consider all block/io entry points of offset/bytes: 4 bytes/offset interface functions: bdrv_co_preadv_part(), bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and bdrv_co_pdiscard() and we check them all with bdrv_check_request(). We also have one entry point with only offset: bdrv_co_truncate(). Check the offset. And one public structure: BdrvTrackedRequest. Happily, it has only three external users: file-posix.c: adopted by this patch write-threshold.c: only read fields test-write-threshold.c: sets obviously small constant values Better is to make the structure private and add corresponding interfaces.. Still it's not obvious what kind of interface is needed for file-posix.c. Let's keep it public but add corresponding assertions. After this patch we'll convert functions in block/io.c to int64_t bytes and offset parameters. We can assume that offset/bytes pair always satisfy new restrictions, and make corresponding assertions where needed. If we reach some offset/bytes point in block/io.c missing bdrv_check_request() it is considered a bug. As well, if block/io.c modifies a offset/bytes request, expanding it more then aligning up to request_alignment, it's a bug too. For all io requests except for discard we keep for now old restriction of 32bit request length. iotest 206 output error message changed, as now test disk size is larger than new limit. Add one more test case with new maximum disk size to cover too-big-L1 case. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block/io: bdrv_check_byte_request(): drop bdrv_is_inserted()Vladimir Sementsov-Ogievskiy1-13/+12
Move bdrv_is_inserted() calls into callers. We are going to make bdrv_check_byte_request() a clean thing. bdrv_is_inserted() is not about checking the request, it's about checking the bs. So, it should be separate. With this patch we probably change error path for some failure scenarios. But depending on the fact that querying too big request on empty cdrom (or corrupted qcow2 node with no drv) will result in EIO and not ENOMEDIUM would be very strange. More over, we are going to move to 64bit requests, so larger requests will be allowed anyway. More over, keeping in mind that cdrom is the only driver that has .bdrv_is_inserted() handler it's strange that we should care so much about it in generic block layer, intuitively we should just do read and write, and cdrom driver should return correct errors if it is not inserted. But it's a work for another series. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201203222713.13507-4-vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block/io: bdrv_refresh_limits(): use ERRP_GUARDVladimir Sementsov-Ogievskiy1-4/+3
This simplifies following commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201203222713.13507-3-vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block/file-posix: fix workaround in raw_do_pwrite_zeroes()Vladimir Sementsov-Ogievskiy1-1/+0
We should not set overlap_bytes: 1. Don't worry: it is calculated by bdrv_mark_request_serialising() and will be equal to or greater than bytes anyway. 2. If the request was already aligned up to some greater alignment, than we may break things: we reduce overlap_bytes, and further bdrv_mark_request_serialising() may not help, as it will not restore old bigger alignment. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201203222713.13507-2-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11can-host: Fix crash when 'canbus' property is not setKevin Wolf1-0/+5
Providing the 'if' property, but not 'canbus' segfaults like this: #0 0x0000555555b0f14d in can_bus_insert_client (bus=0x0, client=0x555556aa9af0) at ../net/can/can_core.c:88 #1 0x00005555559c3803 in can_host_connect (ch=0x555556aa9ac0, errp=0x7fffffffd568) at ../net/can/can_host.c:62 #2 0x00005555559c386a in can_host_complete (uc=0x555556aa9ac0, errp=0x7fffffffd568) at ../net/can/can_host.c:72 #3 0x0000555555d52de9 in user_creatable_complete (uc=0x555556aa9ac0, errp=0x7fffffffd5c8) at ../qom/object_interfaces.c:23 Add the missing NULL check. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201130105615.21799-5-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests/221: Discard image before qemu-img mapMax Reitz2-8/+13
See the new comment for why this should be done. I do not have a reproducer on master, but when using FUSE block exports, this test breaks depending on the underlying filesystem (for me, it works on tmpfs, but fails on xfs, because the block allocated by file-posix has 16 kB there instead of 4 kB). Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201207152245.66987-1-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11file-posix: check the use_lock before setting the file lockLi Feng1-1/+1
The scenario is that when accessing a volume on an NFS filesystem without supporting the file lock, Qemu will complain "Failed to lock byte 100", even when setting the file.locking = off. We should do file lock related operations only when the file.locking is enabled, otherwise, the syscall of 'fcntl' will return non-zero. Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <1607341446-85506-1-git-send-email-fengli@smartx.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests/308: Add test for FUSE exportsMax Reitz3-0/+437
We have good coverage of the normal I/O paths now, but what remains is a test that tests some more special cases: Exporting an image on itself (thus turning a formatted image into a raw one), some error cases, and non-writable and non-growable exports. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-21-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Enable fuse for many testsMax Reitz75-75/+75
Many tests (that do not support generic protocols) can run just fine with FUSE-exported images, so allow them to. Note that this is no attempt at being definitely complete. There are some tests that might be modified to run on FUSE, but this patch still skips them. This patch only tries to pick the rather low-hanging fruits. Note that 221 and 250 only pass when .lseek is correctly implemented, which is only possible with a libfuse that is 3.8 or newer. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-20-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Allow testing FUSE exportsMax Reitz3-1/+134
This pretends FUSE exports are a kind of protocol. As such, they are always tested under the format node. This is probably the best way to test them, actually, because this will generate more I/O load and more varied patterns. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-19-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Give access to the qemu-storage-daemonMax Reitz2-0/+28
Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-18-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11storage-daemon: Call bdrv_close_all() on exitMax Reitz1-0/+3
Otherwise, exports and block devices are not properly shut down and closed, unless the users explicitly issues blockdev-del and block-export-del commands for each of them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-17-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests/287: Clean up subshell test imageMax Reitz1-2/+2
287 creates an image in a subshell (thanks to the pipe) to see whether that is possible with compression_type=zstd. If _make_test_img were to modify any global state, this global state would then be lost before we could cleanup the image. When using FUSE as the test protocol, this global state is important, so clean up the image before the state is lost. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-16-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Let _make_test_img guess $TEST_IMG_FILEMax Reitz1-3/+37
When most iotests want to create a test image that is named differently from the default $TEST_IMG, they do something like this: TEST_IMG="$TEST_IMG.base" _make_test_img $options This works fine with the "file" protocol, but not so much for anything else: _make_test_img tries to create an image under $TEST_IMG_FILE first, and only under $TEST_IMG if the former is not set; and on everything but "file", $TEST_IMG_FILE is set. There are two ways we can fix this: First, we could make all tests adjust not only TEST_IMG, but also TEST_IMG_FILE if that is present (e.g. with something like _set_test_img_suffix $suffix that would affect not only TEST_IMG but also TEST_IMG_FILE, if necessary). This is a pretty clean solution, and this is maybe what we should have done from the start. But it would also require changes to most existing bash tests. So the alternative is this: Let _make_test_img see whether $TEST_IMG_FILE still points to the original value. If so, it is possible that the caller has adjusted $TEST_IMG but not $TEST_IMG_FILE. In such a case, we can (for most protocols) derive the corresponding $TEST_IMG_FILE value from $TEST_IMG value and thus work around what technically is the caller misbehaving. This second solution is less clean, but it is robust against people keeping their old habit of adjusting TEST_IMG only, and requires much less changes. So this patch implements it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-15-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Restrict some Python tests to fileMax Reitz2-2/+4
Most Python tests are restricted to the file protocol (without explicitly saying so), but these are the ones that would break ./check -fuse -qcow2. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-14-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests/091: Use _cleanup_qemu instad of "wait"Max Reitz1-1/+2
If the test environment has some other child processes running (like a storage daemon that provides a FUSE export), then "wait" will never finish. Use wait=yes _cleanup_qemu instead. (We need to discard the output so there is no change to the reference output.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-13-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Derive image names from $TEST_IMGMax Reitz4-9/+7
Avoid creating images with custom filenames in $TEST_DIR, because non-file protocols may want to keep $TEST_IMG (and all other test images) in some other directory. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-12-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests/046: Avoid renaming imagesMax Reitz2-3/+4
This generally does not work on non-file protocols. It is better to create the image with the final name from the start, and most tests do this already. Let 046 follow suit. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-11-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Use convert -n in some casesMax Reitz4-11/+10
qemu-img convert (without -n) can often be replaced by a combination of _make_test_img + qemu-img convert -n. Doing so allows converting to protocols that do not allow direct file creation, such as FUSE exports. The only problem is that for formats other than qcow2 and qed (qcow1 at least), this may lead to high disk usage for some reason, so we cannot do it everywhere. But we can do it in 028 and 089, so let us do that so they can run on FUSE exports. Also, in 028 this allows us to remove a 9-line comment that used to explain why we cannot safely filter drive-backup's image creation output. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-10-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Do not pipe _make_test_imgMax Reitz2-5/+24
Executing _make_test_img as part of a pipe will undo all variable changes it has done. As such, this could not work with FUSE (because we want to remember all of our exports and their qemu instances). Replace the pipe by a temporary file in 071 and 174 (the two tests that can run on FUSE). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-9-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11iotests: Do not needlessly filter _make_test_imgMax Reitz3-12/+12
In most cases, _make_test_img does not need a _filter_imgfmt on top. It does that by itself. (The exception is when IMGFMT has been overwritten but TEST_IMG has not. In such cases, we do need a _filter_imgfmt on top to filter the test's original IMGFMT from TEST_IMG.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-8-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11fuse: Implement hole detection through lseekMax Reitz4-1/+106
This is a relatively new feature in libfuse (available since 3.8.0, which was released in November 2019), so we have to add a dedicated check whether it is available before making use of it. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-7-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11fuse: (Partially) implement fallocate()Max Reitz1-0/+84
This allows allocating areas after the (old) EOF as part of a growing resize, writing zeroes, and discarding. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-6-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11fuse: Allow growable exportsMax Reitz2-9/+41
These will behave more like normal files in that writes beyond the EOF will automatically grow the export size. As an optimization, keep the RESIZE permission for growable exports so we do not have to take it for every post-EOF write. (This permission is not released when the export is destroyed, because at that point the BlockBackend is destroyed altogether anyway.) Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-5-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11fuse: Implement standard FUSE operationsMax Reitz1-0/+242
This makes the export actually useful instead of only producing errors whenever it is accessed. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-4-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11fuse: Allow exporting BDSs via FUSEMax Reitz7-2/+359
block-export-add type=fuse allows mounting block graph nodes via FUSE on some existing regular file. That file should then appears like a raw disk image, and accesses to it result in accesses to the exported BDS. Right now, we only implement the necessary block export functions to set it up and shut it down. We do not implement any access functions, so accessing the mount point only results in errors. This will be addressed by a followup patch. We keep a hash table of exported mount points, because we want to be able to detect when users try to use a mount point twice. This is because we invoke stat() to check whether the given mount point is a regular file, but if that file is served by ourselves (because it is already used as a mount point), then this stat() would have to be served by ourselves, too, which is impossible to do while we (as the caller) are waiting for it to settle. Therefore, keep track of mount point paths to at least catch the most obvious instances of that problem. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11meson: Detect libfuseMax Reitz3-0/+15
Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20201027190600.192171-2-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block/iscsi: Use lock guard macrosGan Qixin1-26/+24
Replace manual lock()/unlock() calls with lock guard macros (QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/iscsi. Signed-off-by: Gan Qixin <ganqixin@huawei.com> Message-Id: <20201203075055.127773-5-ganqixin@huawei.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block/throttle-groups: Use lock guard macrosGan Qixin1-25/+23
Replace manual lock()/unlock() calls with lock guard macros (QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/throttle-groups. Signed-off-by: Gan Qixin <ganqixin@huawei.com> Message-Id: <20201203075055.127773-4-ganqixin@huawei.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block/curl: Use lock guard macrosGan Qixin1-14/+14
Replace manual lock()/unlock() calls with lock guard macros (QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/curl. Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20201203075055.127773-3-ganqixin@huawei.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11block/accounting: Use lock guard macrosGan Qixin1-17/+15
Replace manual lock()/unlock() calls with lock guard macros (QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/accounting. Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20201203075055.127773-2-ganqixin@huawei.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20201210' ↵Peter Maydell10-501/+669
into staging Split CpusAccel for tcg variants # gpg: Signature made Fri 11 Dec 2020 01:07:33 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-tcg-20201210: accel/tcg: rename tcg-cpus functions to match module name accel/tcg: split tcg_start_vcpu_thread accel/tcg: split CpusAccel into three TCG variants Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell151-1768/+2879
staging * Fix for NULL segments (Bin Meng) * Support for 32768 CPUs on x86 without IOMMU (David) * PDEP/PEXT fix and testcase (myself) * Remove bios_name and ram_size globals (myself) * qemu_init rationalization (myself) * Update kernel-doc (myself + upstream patches) * Propagate MemTxResult across DMA and PCI functions (Philippe) * Remove master/slave when applicable (Philippe) * WHPX support for in-kernel irqchip (Sunil) # gpg: Signature made Thu 10 Dec 2020 17:21:50 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (113 commits) scripts: kernel-doc: remove unnecessary change wrt Linux Revert "docs: temporarily disable the kernel-doc extension" scripts: kernel-doc: use :c:union when needed scripts: kernel-doc: split typedef complex regex scripts: kernel-doc: fix typedef parsing Revert "kernel-doc: Handle function typedefs that return pointers" Revert "kernel-doc: Handle function typedefs without asterisks" scripts: kernel-doc: try to use c:function if possible scripts: kernel-doc: fix line number handling scripts: kernel-doc: allow passing desired Sphinx C domain dialect scripts: kernel-doc: don't mangle with parameter list scripts: kernel-doc: fix typedef identification scripts: kernel-doc: reimplement -nofunction argument scripts: kernel-doc: fix troubles with line counts scripts: kernel-doc: use a less pedantic markup for funcs on Sphinx 3.x scripts: kernel-doc: make it more compatible with Sphinx 3.x Revert "kernel-doc: Use c:struct for Sphinx 3.0 and later" Revert "scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments" scripts: kernel-doc: add support for typedef enum kernel-doc: add support for ____cacheline_aligned attribute ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11Merge remote-tracking branch ↵Peter Maydell11-7/+151
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2020-12-10 Some patches that were queued after 5.2 soft freeze. # gpg: Signature made Thu 10 Dec 2020 22:41:29 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: i386/cpu: Make the Intel PT LIP feature configurable sev: add sev-inject-launch-secret qom: code hardening - have bound checking while looping with integer value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11s390x/cpu: Use timer_free() in the finalize function to avoid memleaksGan Qixin1-0/+5
When running device-introspect-test, a memory leak occurred in the s390_cpu_initfn function, this patch use timer_free() in the finalize function to fix it. ASAN shows memory leak stack: Direct leak of 3552 byte(s) in 74 object(s) allocated from: #0 0xfffeb3d4e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xfffeb36e6800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaad51a8f9c4 in timer_new_full qemu/include/qemu/timer.h:523 #3 0xaaad51a8f9c4 in timer_new qemu/include/qemu/timer.h:544 #4 0xaaad51a8f9c4 in timer_new_ns qemu/include/qemu/timer.h:562 #5 0xaaad51a8f9c4 in s390_cpu_initfn qemu/target/s390x/cpu.c:304 #6 0xaaad51e00f58 in object_init_with_type qemu/qom/object.c:371 #7 0xaaad51e0406c in object_initialize_with_type qemu/qom/object.c:515 #8 0xaaad51e042e0 in object_new_with_type qemu/qom/object.c:729 #9 0xaaad51e3ff40 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153 #10 0xaaad51910518 in qdev_device_help qemu/softmmu/qdev-monitor.c:283 #11 0xaaad51911918 in qmp_device_add qemu/softmmu/qdev-monitor.c:801 #12 0xaaad51911e48 in hmp_device_add qemu/softmmu/qdev-monitor.c:916 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20201204081209.360524-4-ganqixin@huawei.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-12-11tests/acceptance: test s390x zpci fid propagationCornelia Huck1-3/+9
Verify that a fid specified on the command line shows up correctly as the function_id in the guest. Signed-off-by: Cornelia Huck <cohuck@redhat.com> [re-formatted overlong lines] Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20201130180216.15366-4-cohuck@redhat.com>
2020-12-11tests/acceptance: verify s390x device detectionCornelia Huck1-0/+11
The kernel/initrd combination does not provide the virtio-net driver; therefore, simply check whether the presented device type is indeed virtio-net for the two virtio-net-{ccw,pci} devices. Signed-off-by: Cornelia Huck <cohuck@redhat.com> [re-formatted overlong lines] Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20201130180216.15366-3-cohuck@redhat.com>
2020-12-11tests/acceptance: test virtio-ccw revision handlingCornelia Huck1-2/+18
The max_revision prop of virtio-ccw devices can be used to force an older revision for compatibility handling. The easiest way to check this is to force a device to revision 0, which turns off virtio-1. Signed-off-by: Cornelia Huck <cohuck@redhat.com> [re-formatted overlong lines] Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20201130180216.15366-2-cohuck@redhat.com>
2020-12-11tests/acceptance: add a test for devices on s390xCornelia Huck2-0/+69
This adds a very basic test for checking that we present devices in a way that Linux can consume: boot with both virtio-net-ccw and virtio-net-pci attached and then verify that Linux is able to see and detect these devices. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20201126130158.1471985-1-cohuck@redhat.com>
2020-12-11hw/watchdog/wdt_diag288: Remove unnecessary includesThomas Huth1-2/+0
Neither sysbus.h nor module.h are required to compile this file. diag288 is not a sysbus device, and module.h (for type_init) is included eventually through qom/object.h. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20201118090344.243117-1-thuth@redhat.com> [CH: tweaked description] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-12-11sdl2: Add extra mouse buttonsDarrell Walisser1-0/+2
Allows guest to receive mouse buttons 4 and 5, aka "SIDE" button and "EXTRA" button Signed-off-by: Darrell Walisser <darrell.walisser@gmail.com> Message-id: GNUALCfDBqhCUvLwBNJaKqxcPewMtlqCnixk8xTrgI@ubuntu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.1 at 2024-12-29 10:53:50 +0000