aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-09x86: ich9: factor out "guest_cpu_hotplug_features"Igor Mammedov1-2/+6
it will be reused by next patch to check validity of unplug feature. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-8-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09tests/acpi: update expected filesIgor Mammedov22-21/+0
update expected files with following change: @@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001) CINS, 1, CRMV, 1, CEJ0, 1, + CEJF, 1, Offset (0x05), CCMD, 8 } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-7-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09x86: acpi: let the firmware handle pending "CPU remove" events in SMMIgor Mammedov3-2/+14
if firmware and QEMU negotiated CPU hotunplug support, generate _EJ0 method so that it will mark CPU for removal by firmware and pass control to it by triggering SMI. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09tests/acpi: allow expected files changeIgor Mammedov1-0/+21
Change that will be introduced by following patch: @@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001) CINS, 1, CRMV, 1, CEJ0, 1, + CEJF, 1, Offset (0x05), CCMD, 8 } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplugIgor Mammedov1-0/+4
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09acpi: cpuhp: introduce 'firmware performs eject' status/control bitsIgor Mammedov4-6/+28
Adds bit #4 to status/control field of CPU hotplug MMIO interface. New bit will be used OSPM to mark CPUs as pending for removal by firmware, when it calls _EJ0 method on CPU device node. Later on, when firmware sees this bit set, it will perform CPU eject which will clear bit #4 as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09hw/i386/pc: add max combined fw size as machine configuration optionErich-McMillan3-12/+56
At Hewlett Packard Inc. we have a need for increased fw size to enable testing of our custom fw. Rebase v6 patch to d73c46e4 Signed-off-by: Erich McMillan <erich.mcmillan@hp.com> Message-Id: <20201208155338.14-1-erich.mcmillan@hp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09block/export: avoid g_return_val_if() input validationStefan Hajnoczi1-1/+3
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-5-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09contrib/vhost-user-input: avoid g_return_val_if() input validationStefan Hajnoczi1-1/+3
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-4-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09contrib/vhost-user-gpu: avoid g_return_val_if() input validationStefan Hajnoczi1-1/+3
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-3-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09contrib/vhost-user-blk: avoid g_return_val_if() input validationStefan Hajnoczi1-1/+3
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-2-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09.gitlab-ci: add build-libvhost-userMarc-André Lureau1-0/+11
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-9-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09libvhost-user: add a simple link test without glibMarc-André Lureau2-0/+49
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-8-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09Merge remote-tracking branch ↵Peter Maydell7-63/+163
'remotes/huth-gitlab/tags/pull-request-2020-12-09' into staging * Gitlab-CI improvement patches by Philippe * Some small fixes for tests * Fix coverity warning in the mcf5206 code # gpg: Signature made Wed 09 Dec 2020 07:13:12 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-12-09: hw/m68k/mcf5206: Don't leak IRQs in mcf5206_mbar_realize() gitlab-ci: Move coroutine tests across to gitlab gitlab-ci: Move user-static test across to gitlab gitlab-ci: Update 'build-disabled' to cover all configurable options gitlab-ci: Split CONFIGURE_ARGS one argument per line for build-disabled fuzz: avoid double-fetches by default tests/qtest/fuzz-test: Quit test_lp1878642 once done test-qga: fix a resource leak in test_qga_guest_get_osinfo() gitlab-ci: Add Xen cross-build jobs gitlab-ci: Add KVM s390x cross-build jobs gitlab-ci: Introduce 'cross_accel_build_job' template gitlab-ci: Replace YAML anchors by extends (cross_system_build_job) gitlab-ci: Document 'build-tcg-disabled' is a KVM X86 job Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-09hw/m68k/mcf5206: Don't leak IRQs in mcf5206_mbar_realize()Peter Maydell1-6/+6
Coverity points out that the realize function for the TYPE_MCF5206_MBAR device leaks the IRQ array it allocates with qemu_allocate_irqs(). Keep a pointer to it in the device state struct to avoid the leak. (Since it needs to stay around for the life of the simulation there is no need to actually free it, and the leak was harmless.) Fixes: Coverity CID 1432412 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <huth@tuxfamily.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201120172314.14725-1-peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Move coroutine tests across to gitlabPhilippe Mathieu-Daudé2-14/+16
Similarly to commit 8cdb2cef3f1, move the coroutine tests to GitLab. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201108204535.2319870-13-philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> [thuth: Replaced Travis by Gitlab-CI in comment] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Move user-static test across to gitlabPhilippe Mathieu-Daudé2-5/+7
Similarly to commit 8cdb2cef3f1, move the user-static test to GitLab. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201108204535.2319870-11-philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Update 'build-disabled' to cover all configurable optionsPhilippe Mathieu-Daudé1-0/+6
Add these missing options to the 'build-disabled' job: --disable-auth-pam (commit 8953caf3cd38) --disable-gcrypt (commit 91bfcdb01d48) --disable-keyring (commit 54e7aac05624) --disable-libudev (commit 5c53015a480b) --disable-opengl (commit da076ffed6b9) --disable-sparse (commit 03b4fe7de226) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> [thuth: Dropped the unnecessary hunk with --disable-vhost-user-blk-server] Message-Id: <20201108204535.2319870-7-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Split CONFIGURE_ARGS one argument per line for build-disabledPhilippe Mathieu-Daudé1-17/+63
We will keep adding/removing options to our 'configure' script, so for easier maintainability it makes sense to have CONFIGURE_ARGS declared as one option per line. This way we can review diff easily (or rebase/cherry-pick). No logical change. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201108204535.2319870-6-philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09fuzz: avoid double-fetches by defaultAlexander Bulekov1-0/+1
The generic fuzzer can find double-fetch bugs. However: * We currently have no good way of producing qemu-system reproducers for double-fetch bugs. Even if we can get developers to run the binary-blob reproducers with the qemu-fuzz builds, we currently don't have a minimizer for these reproducers, so they are usually not easy to follow. * Often times the fuzzer will provide a reproducer containing a double-fetch for a bug that can be reproduced without double-fetching. Until we find a way to build nice double-fetch reproducers that developers are willing to look at, lets tell OSS-Fuzz to avoid double-fetches. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-Id: <20201202164214.93867-1-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09tests/qtest/fuzz-test: Quit test_lp1878642 once donePhilippe Mathieu-Daudé1-0/+1
Missed in fd250172842 ("qtest: add a reproducer for LP#1878642"). Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201201191026.4149955-2-philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09test-qga: fix a resource leak in test_qga_guest_get_osinfo()Alex Chen1-0/+1
The fixture->fd is created in fixture_setup() and, likewise, needs to be closed in fixture_tear_down(). Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125102403.57709-1-alex.chen@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Add Xen cross-build jobsPhilippe Mathieu-Daudé1-0/+14
Cross-build ARM and X86 targets with only Xen accelerator enabled. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201207131503.3858889-6-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Add KVM s390x cross-build jobsPhilippe Mathieu-Daudé1-1/+6
Cross-build s390x target with only KVM accelerator enabled. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201207131503.3858889-5-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Introduce 'cross_accel_build_job' templatePhilippe Mathieu-Daudé1-0/+17
Introduce a job template to cross-build accelerator specific jobs (enable a specific accelerator, disabling the others). The specific accelerator is selected by the $ACCEL environment variable (default to KVM). Extra options such disabling other accelerators are passed via the $ACCEL_CONFIGURE_OPTS environment variable. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201207131503.3858889-4-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Replace YAML anchors by extends (cross_system_build_job)Philippe Mathieu-Daudé1-20/+20
'extends' is an alternative to using YAML anchors and is a little more flexible and readable. See: https://docs.gitlab.com/ee/ci/yaml/#extends More importantly it allows exploding YAML jobs. Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201207131503.3858889-3-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Document 'build-tcg-disabled' is a KVM X86 jobPhilippe Mathieu-Daudé1-0/+5
Document what this job cover (build X86 targets with KVM being the single accelerator available). Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201207131503.3858889-2-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-08Open 6.0 development treePeter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-08libvhost-user: make it a meson subprojectMarc-André Lureau21-27/+40
By making libvhost-user a subproject, check it builds standalone (without the global QEMU cflags etc). Note that the library still relies on QEMU include/qemu/atomic.h and linux_headers/. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-6-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: drop qemu/osdep.h dependencyMarc-André Lureau1-2/+8
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-5-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: remove qemu/compiler.h usageMarc-André Lureau1-1/+4
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-4-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: replace qemu/memfd.h usageMarc-André Lureau1-7/+43
Undo the damage from commit 5f9ff1eff3 ("libvhost-user: Support tracking inflight I/O in shared memory") which introduced glib dependency through osdep.h inclusion. libvhost-user.c tries to stay free from glib usage. Use glibc memfd_create directly when available (assumed so when MFD_ALLOW_SEALING is defined). A following commit will make the project standalone and check for memfd API at configure time, instead of a panic at runtime. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201125100640.366523-3-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: replace qemu/bswap.h with glibc endian.hMarc-André Lureau1-37/+40
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201125100640.366523-2-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08hw: add compat machines for 6.0Cornelia Huck9-6/+71
Add 6.0 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20201109173928.1001764-1-cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove primary_dev memberJuan Quintela2-32/+24
Only three uses remained, and we can remove them on that case. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-28-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify failover_unplug_primaryJuan Quintela1-15/+10
We can calculate device just once. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-27-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Caller of this two functions already have primary_devJuan Quintela1-13/+14
Pass it as an argument. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-26-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: We don't need to cache primary_device_id anymoreJuan Quintela2-11/+10
Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-25-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: split failover_find_primary_device_id()Juan Quintela1-16/+47
So we can calculate the device id when we need it. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-24-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: remove failover_find_primary_device() error parameterJuan Quintela1-6/+3
It can never give one error. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-23-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: make sure that id always existJuan Quintela2-3/+4
We check that it exist at device creation time, so we don't have to check anywhere else. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-22-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify qdev_device_add()Juan Quintela1-26/+6
We don't need to walk the opts by hand. qmp_opt_get() already does that. And then we can remove the functions that did that walk. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-21-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify qdev_device_add() failover caseJuan Quintela1-5/+6
Just put allthe logic inside the same if. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-20-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Rename to failover_find_primary_device()Juan Quintela1-3/+9
This commit: * Rename them to failover_find_primary_devices() so - it starts with failover_ - it don't connect anything, just find the primary device * Create documentation for the function Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-19-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: virtio_net_connect_failover_devices() does nothingJuan Quintela1-15/+2
It just calls virtio_net_find_primary(), so just update the callers. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-18-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Rename function to hide_device()Juan Quintela3-19/+20
You should not use pasive. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-17-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: should_be_hidden() should take a boolJuan Quintela3-35/+13
We didn't use at all the -1 value, and we don't really care. It was only used for the cases when this is not the device that we are searching for. And in that case we should not hide the device. Once there, simplify virtio-Snet_primary_should_be_hidden. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-16-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify virtio_net_find_primary()Juan Quintela1-15/+3
a - is_my_primary() never sets one error b - If we return 1, primary_device_id is always set Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-15-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove memory leakJuan Quintela1-3/+1
Two things, at this point: * n->primary_device_id has to be set, otherwise virtio_net_find_primary don't work. So we have a leak here. * it has to be exactly the same that prim_dev->id because what qdev_find_recursive() does is just compare this two values. So remove the unneeded assignment and leaky bits. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-14-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove primary_device_dictJuan Quintela2-14/+4
It was only used once. And we have there opts->id, so no need for it. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-13-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2025-09-20 09:17:49 +0000