aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-04-22simplify vga selection (Gerd Hoffmann)aliguori1-11/+4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7227 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: pv domain builder. (Gerd Hoffmann)aliguori7-2/+360
This adds domain building support for paravirtual domains to qemu. This allows booting xen guests directly with qemu, without Xend and the management stack. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7226 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: blk & nic configuration via cmd line. (Gerd Hoffmann)aliguori5-1/+171
This patch makes qemu create backend and frontend device entries in xenstore for devices configured on the command line. It will use qdisk and qnic backend names, so the qemu internal backends will be used. Disks can be created using -drive if=xen,file=... Nics can be created using -net nic,macaddr=... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7225 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add net backend driver. (Gerd Hoffmann)aliguori4-1/+409
This patch adds a network interface backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qnet" as backend name in xenstore so it doesn't interfere with the netback backend (aka "vnif"). The network backend is hooked into the corrosponding qemu vlan, i.e. vif 0 is hooked into vlan 0. To make the packages actually arrive somewhere you additionally have to link the vlan to the outside world using the usual qemu command line options such as "-net tap,...". Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7224 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add block device backend driver. (Gerd Hoffmann)aliguori7-3/+892
This patch adds a block device backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qdisk" as backend name in xenstore so it doesn't interfere with the other existing backends (blkback aka "vbd" and tapdisk aka "tap"). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7223 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add framebuffer backend driver (Gerd Hoffmann)aliguori4-1/+1023
This patch adds a frsamebuffer (and kbd+mouse) backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. It also has been changed to compile with xen headers older than release 3.3 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7222 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add console backend driver. (Gerd Hoffmann)aliguori4-0/+275
This patch adds a xenconsole backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7221 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: backend driver core (Gerd Hoffmann)aliguori5-2/+841
This patch adds infrastructure for xen backend drivers living in qemu, so drivers don't need to implement common stuff on their own. It's mostly xenbus management stuff: some functions to access xentore, setting up xenstore watches, callbacks on device discovery and state changes, handle event channel, ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: groundwork for xen support (Gerd Hoffmann)aliguori8-0/+150
- configure script and build system changes. - wind up new machine type. - add -xen-* command line options. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7219 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22update .gitignore: add qemu-io (Gerd Hoffmann)aliguori1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21qcow2: Add plausibility check for L1/L2 entries (Kevin Wolf)aliguori1-0/+14
From: Kevin Wolf <kwolf@redhat.com> All L1 and L2 entries must point at the start of a cluster. If there is some offset into the cluster, the entry is corrupted. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7217 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21qcow2: Refcount checking code cleanup (Kevin Wolf)aliguori1-44/+105
This is purely cosmetical changes to make the code easier to read. Move L2 table processing from a deeply nested block to its own function, add some comments. Patch v2: Fix misplaced bracket causing false positives Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7216 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Introduce qemu-img check subcommand (Kevin Wolf)aliguori1-0/+62
From: Kevin Wolf <kwolf@redhat.com> Now that block drivers can provide check functions, expose them through qemu-img. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7215 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Introduce bdrv_check (Kevin Wolf)aliguori4-19/+70
From: Kevin Wolf <kwolf@redhat.com> Introduce a new bdrv_check function pointer for block drivers. Modify qcow2 to return an error status in check_refcounts(), so it can implement bdrv_check. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7214 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21qcow2: Fix warnings in check_refcount() (Kevin Wolf)aliguori1-10/+13
From: Kevin Wolf <kwolf@redhat.com> This code is currently only compiled when DEBUG_ALLOC is defined, so you usually don't see compiler warnings on it. This patch series wants to enable the code, so fix the format string warnings first. While we're at it, let's print error messages to stderr. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7213 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21sending NUMA topology to BIOS (Andre Przywara)aliguori5-0/+331
uses the QEMU firmware configuration interfacce to send the NUMA topology to the BIOS, which has to setup the tables. Only one firmware configuration channel is used. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7212 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21add info numa command to monitor (Andre Przywara)aliguori1-0/+21
adds an "info numa" command to the monitor to output the current topology. Since NUMA is advertised via static ACPI tables, no changes are possible during runtime. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7211 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21added -numa cmdline parameter parser (Andre Przywara)aliguori5-5/+144
adds a -numa command line parameter and sets a QEMU global array with the memory sizes. The CPU-to-node assignemnt is written into the CPUState. If no specific values for memory and CPUs are given, all resources will be split equally across all nodes. This code currently support only up to 64 virtual CPUs. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7210 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Safety net for the cases where disassembler/translator disagree over ↵malc1-0/+7
instruction decoding Noticed by Mark Karpeles. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7209 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Prevent multiple slirp instances (Jan Kiszka)aliguori1-1/+13
The slirp stack is full of global variables which prevents instantiating it more than once. Catch this during net_slirp_init to prevent more harm later on. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7208 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21slirp: Enhance host-guest redirection setup (Jan Kiszka)aliguori5-17/+28
Allow to establish a TCP/UDP connection redirection also via a monitor command 'host_net_redir'. Moreover, assume TCP as connection type if that parameter is omitted. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Untangle nested qemu_send_packet (Jan Kiszka)aliguori2-6/+41
Queue packets that are send during an ongoing packet delivery. This ensures that packets will always arrive in their logical order at each client of a VLAN. Currently, slirp generates such immediate relies, and e.g. packet-sniffing clients on the same VLAN may get confused. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21monitor: Allow host_net_add/remove for all targets (Jan Kiszka)aliguori1-1/+1
There is nothing x86-specific in host_net_add/remove, so allow them for all targets. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21monitor: Improve host_net_add (Jan Kiszka)aliguori2-3/+5
Fix the documentation of the host_net_add monitor command and allow the user to pass no options at all. Moreover, inform the user on the monitor terminal if a request failed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Add support for capturing VLANs (Jan Kiszka)aliguori3-3/+121
This patch is derived from Tristan Gingold's patch. It adds a new VLAN client type that writes all traffic on the VLAN it is attached to into a pcap file. Such a file can then be analyzed offline with Wireshark or tcpdump. Besides rebasing and some minor cleanups, the major differences to the original version are: - support for enabling/disabling via the monitor (host_net_add/remove) - no special ordering of VLAN client list, qemu_send_packet now takes care of properly ordered packets - 64k default capturing limit (I hate tcpdump's default) Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Allow empty params for check_params (Jan Kiszka)aliguori1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7199 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21slirp: Handle DHCP requests for specific IP (Jan Kiszka)aliguori2-34/+95
This adds proper handling of the ciaddr field as well as the "Requested IP Address" option to slirp's DHCP server. If the client requests an invalid or used IP, a NAK reply is sent, if it requests a specific but valid IP, this is now respected. NAK'ing invalid IPs is specifically useful when changing the slirp IP range via '-net user,ip=...' while the client saved its previously used address and tries to reacquire it. Now this will be NAK'ed and the client will start a new discovery round. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Add parameter checks for VLAN clients (Jan Kiszka)aliguori1-0/+83
This aims at helping the user to find typos or other mistakes in parameter lists passed for VLAN client initialization. The existing parsing infrastructure does not allow a leaner approach, but this is better than nothing IMHO. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7197 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Fix -net socket,listen (Jan Kiszka)aliguori1-1/+1
In case no symbolic name is provided when requesting VLAN connection via listening TCP socket ('-net socket,listen=...'), qemu crashes. This fixes the cause. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7196 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Check device passed to host_net_remove (Jan Kiszka)aliguori1-2/+8
Make sure that we do not delete guest NICs via host_net_remove. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7195 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21MIPS signal handling fixes.pbrook3-4/+109
Also fixes a register corruption bug in do_sigreturn. When "returning" from sigreturn we are actually restoring the virtual cpu state from the signal frame. This is actually surprisingly hard to observe in practice. Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives, so the effect is a spurious syscall success and the introduction of a subtle race condition. On x86/arm a syscall modifies a single word sized register, so do_sigreturn can just return that value. On MIPS a syscall clobbers multiple registers, so we need additional smarts. My solution is to invent a magic errno value that means "don't touch CPU state". git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21MIPS: Raise SIGSEGV, not SIGILL when an access faults.pbrook1-0/+7
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7193 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Fix target_siginfo ordering for MIPS.pbrook1-0/+6
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7192 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-20Enable access to SYNCI_Step register in usermode emulation.pbrook1-0/+2
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7191 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Build system: Fix dependency of qemu.1blueswir11-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7190 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19kqemu: merge CONFIG_KQEMU and USE_KQEMUblueswir116-59/+59
Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Adds SM501 usb host emulation feature.aurel324-44/+109
It makes usb keyboard available for sh4/r2d system emulation. The changes for "hw/usb-ohci.c" are as follows. - 'localmem_base' is introduced as OHCIState struct member. SM501 has a local memory, and it is used to pass and receive data with OHCI driver. OHCI driver accesses it with SH4 physical memory address, and SM501 accesses it with SM501 local address. 'localmem_base' holds where the SM501 local memory is mapped into SH4 physical address space. - Memory access functions modified to adjust address with 'localmem_base'. The functions are, ohci_read_*(), ohci_put_*(), and ohci_copy_*(). - ohci_read_hcca() and ohci_put_hcca() are introduced for more consistent implementation. For other source files, it does, - introduces usb_ohci_init_sm501(). - adds irq argument for SM501 initialization, to emulate USB interrupts. Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7188 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19linux-user: Linux kernel's fchmodat and faccessat have three args (no 4th arg)aurel321-9/+8
In Linux kernel, fchmodat() and faccessat() take tree args. 4th value <int flags> is only processed by libc. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7187 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Fix indices in Menelaus save/load.balrog1-6/+6
Version increase won't be helpful here. Spotted by Sergei Steshenko / Blau Wirbel. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7186 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18kqemu: only compile kqemu.o if actually neededblueswir12-1/+6
kqemu.o is compiled even if kqemu support is disabled. This is useless (kqemu.o should provide nothing that is actually used in that case) and slightly confusing. So introduce CONFIG_KQEMU for optionally compiling kqemu.o. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7185 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18linux-user: fix IPCOP_sem* and implement sem*aurel321-98/+188
Fix and cleanup IPCOP_sem* ipc calls handling and implement sem* syscalls. Riku: 1) Uglify whitespace so that diff gets smaller and easier to review 2) use __get_user in target_to_host_sembuf Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7184 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18qemu-io: Verify read data by patterns (Kevin Wolf)aliguori1-4/+40
This patch adds a -P option to read and readv which allows to compare the read data to a given pattern. This can be used to verify data written by write -P. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7182 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18qemu-io: Fix handling of bdrv_is_allocated() return value (Kevin Wolf)aliguori1-7/+5
bdrv_is_allocated() returns a boolean which indicates if the offset is allocated, not 0 on success and everything else is an error. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7181 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18monitor: Update command help (Jan Kiszka)aliguori1-6/+6
Align some monitor help texts to the related command parameter definitions. host_net_add is skipped intentionally, will be slightly reworked in a separate patch later. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7180 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18x86: Enhanced dump of segment registers (Jan Kiszka)aliguori2-39/+64
Parse the descriptor flags that segment registers refer to and show the result in a more human-friendly format. The output of info registers eg. then looks like this: [...] ES =007b 00000000 ffffffff 00cff300 DPL=3 DS [-WA] CS =0060 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0068 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =007b 00000000 ffffffff 00cff300 DPL=3 DS [-WA] FS =0000 00000000 00000000 00000000 GS =0033 b7dd66c0 ffffffff b7dff3dd DPL=3 DS [-WA] LDT=0000 00000000 00000000 00008200 DPL=0 LDT TR =0080 c06da700 0000206b 00008900 DPL=0 TSS32-avl [...] Changes in this version: - refactoring so that only a single helper is used for dumping the segment descriptor cache - tiny typo fixed that broke 64-bit segment type names Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7179 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18a couple of qemu-io fixes (Christoph Hellwig)aliguori1-2/+2
Fix two stupid bugs that I forgot to push out: - qiov->size already is in bytes, no need to shift it - actually use the supplied patter in the writev command Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7178 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18buildsytem: consistently use install (Christoph Egger)aliguori2-12/+15
attached patch makes qemu use install consistently. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7177 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18Use ANSI prototypes to please sparseblueswir12-17/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7176 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18Add 'static' to avoid a sparse warningblueswir11-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7175 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18Move bootp_filename to avoid a sparse warningblueswir12-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7174 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.1 at 2024-10-17 12:46:11 +0000