aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-27target/arm: Add the SME ZA storage to CPUARMStateRichard Henderson2-0/+56
Place this late in the resettable section of the structure, to keep the most common element offsets from being > 64k. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-10-richard.henderson@linaro.org [PMM: expanded comment on zarray[] format] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Add PSTATE.{SM,ZA} to TB flagsRichard Henderson4-0/+12
These are required to determine if various insns are allowed to issue. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Add SMIDR_EL1, SMPRI_EL1, SMPRIMAP_EL2Richard Henderson1-0/+33
Implement the streaming mode identification register, and the two streaming priority registers. For QEMU, they are all RES0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Add SMCR_ELxRichard Henderson2-2/+47
These cpregs control the streaming vector length and whether the full a64 instruction set is allowed while in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Add SVCRRichard Henderson2-0/+19
This cpreg is used to access two new bits of PSTATE that are not visible via any other mechanism. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Add ARM_CP_SMERichard Henderson2-0/+23
This will be used for controlling access to SME cpregs. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Add syn_smetrapRichard Henderson1-0/+14
This will be used for raising various traps for SME. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Add SMEEXC_EL to TB flagsRichard Henderson4-0/+56
This is CheckSMEAccess, which is the basis for a set of related tests for various SME cpregs and instructions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Implement TPIDR2_EL0Richard Henderson2-0/+33
This register is part of SME, but isn't closely related to the rest of the extension. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620175235.60881-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27target/arm: Catch invalid kvm state also for hvfAlexander Graf1-4/+12
Some features such as running in EL3 or running M profile code are incompatible with virtualization as QEMU implements it today. To prevent users from picking invalid configurations on other virt solutions like Hvf, let's run the same checks there too. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1073 Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620192242.70573-2-agraf@csgraf.de [PMM: Allow qtest accelerator too; tweak comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27accel: Introduce current_accel_name()Alexander Graf3-2/+10
We need to fetch the name of the current accelerator in flexible error messages more going forward. Let's create a helper that gives it to us without casting in the target code. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220620192242.70573-1-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27sphinx: change default language to 'en'Martin Liška1-1/+1
Fixes the following Sphinx warning (treated as error) starting with 5.0 release: Warning, treated as error: Invalid configuration value found: 'language = None'. Update your configuration to a valid langauge code. Falling back to 'en' (English). Signed-off-by: Martin Liska <mliska@suse.cz> Message-id: e91e51ee-48ac-437e-6467-98b56ee40042@suse.cz Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27Merge tag 'qemu-sparc-20220626' of https://github.com/mcayland/qemu into stagingRichard Henderson10-389/+846
qemu-sparc queue # -----BEGIN PGP SIGNATURE----- # # iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmK4moUeHG1hcmsuY2F2 # ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfaXsH/0+FT9TbHXCplB8h # gvOETq9r5UscYMqUIbRPv7eFIhhZUfq4mCzpthZHYfMA6Tag0jMqaP5ymATm6Jm/ # GgS/7Fx+14uO54Cu4NwIFylRuDt39cESrBHrVjmXmYzOXx7a040+TPxtHHwSRXiQ # Vvx5Oo0P8qQfADQe/Y9iray3JBdFMg4yejO37yrdfP58Nh2dzr9dNKw6apY8dwcv # eTVTqVbYY5AAKOjStpxb0x8dFq/WXttclbeaiSZsK1wnuqhJdUtiMY3UaAfYdMEW # kputMhTZqV/oopUY0mHmBEUK843s8bSQs2aoCSXLamGTWcrm27XNOsX0f4AYwf/y # jWBcSvg= # =0MrK # -----END PGP SIGNATURE----- # gpg: Signature made Sun 26 Jun 2022 11:12:29 PM +0530 # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * tag 'qemu-sparc-20220626' of https://github.com/mcayland/qemu: (55 commits) artist: set memory region owners for buffers to the artist device ps2: remove update_irq() function and update_arg parameter pckbd: add QEMU interface comment for I8042 device pckbd: switch I8042 device from update_irq() function to PS2 device gpio pckbd: add i8042_reset() function to I8042 device pckbd: add QEMU interface comment for I8042_MMIO device pckbd: switch I8042_MMIO device from update_irq() function to PS2 device gpio lasips2: add QEMU interface comment lasips2: switch over from update_irq() function to PS2 device gpio lasips2: use sysbus IRQ for output IRQ lasips2: implement lasips2_realize() lasips2: add base property lasips2: move initialisation of PS2 ports from lasi_initfn() to lasi_init() lasips2: move mapping of LASIPS2 registers to HPPA machine lasips2: implement lasips2_init() function lasips2: rename lasips2_init() to lasips2_initfn() and update it to return the LASIPS2 device lasips2: move lasips2 QOM types from lasips2.c to lasips2.h lasips2: QOMify LASIPS2State pl050: add QEMU interface comment pl050: switch over from update_irq() function to PS2 device gpio ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-26artist: set memory region owners for buffers to the artist deviceMark Cave-Ayland1-1/+1
This fixes the output of "info qom-tree" so that the buffers appear as children of the artist device, rather than underneath the "unattached" container. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220624160839.886649-1-mark.cave-ayland@ilande.co.uk> Reviewed-by: Helge Deller <deller@gmx.de>
2022-06-26ps2: remove update_irq() function and update_arg parameterMark Cave-Ayland5-33/+14
Now that all the PS2 devices have been converted to use GPIOs the update_irq() callback function and the update_arg parameter can be removed. This allows these arguments to be completely removed from ps2_kbd_init() and ps2_mouse_init(), along with the transitional logic that was added to ps2_raise_irq() and ps2_lower_irq(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-55-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: add QEMU interface comment for I8042 deviceMark Cave-Ayland1-0/+10
This describes the I8042 device interface implemented within QEMU. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220624134109.881989-54-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26pckbd: switch I8042 device from update_irq() function to PS2 device gpioMark Cave-Ayland1-4/+33
Define a new qdev input gpio for handling incoming PS2 IRQs, and then wire up the PS2 keyboard and mouse devices to use it. At the same time set update_irq() and update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any accidental attempt to use the legacy update_irq() function will cause a NULL pointer dereference. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-53-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: add i8042_reset() function to I8042 deviceMark Cave-Ayland1-1/+9
This means that it is no longer necessary to call qemu_register_reset() manually within i8042_realizefn(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-52-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: add QEMU interface comment for I8042_MMIO deviceMark Cave-Ayland1-0/+11
This describes the I8042_MMIO device interface implemented within QEMU. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220624134109.881989-51-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26pckbd: switch I8042_MMIO device from update_irq() function to PS2 device gpioMark Cave-Ayland1-6/+32
Define a new qdev input gpio for handling incoming PS2 IRQs, and then wire up the PS2 keyboard and mouse devices to use it. At the same time set update_irq() and update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any accidental attempt to use the legacy update_irq() function will cause a NULL pointer dereference. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-50-mark.cave-ayland@ilande.co.uk>
2022-06-26lasips2: add QEMU interface commentMark Cave-Ayland1-0/+14
This describes the LASI PS2 device interface implemented within QEMU. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220624134109.881989-49-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26lasips2: switch over from update_irq() function to PS2 device gpioMark Cave-Ayland1-4/+25
Add a qdev gpio input in lasips2_init() by taking the existing lasips2_port_set_irq() function, updating it accordingly and then renaming to lasips2_set_irq(). Use these new qdev gpio inputs to wire up the PS2 keyboard and mouse devices. At the same time set update_irq() and update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any accidental attempt to use the legacy update_irq() function will cause a NULL pointer dereference. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-48-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26lasips2: use sysbus IRQ for output IRQMark Cave-Ayland1-4/+5
This enables the IRQ to be wired up using sysbus_connect_irq() in lasips2_initfn(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-47-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26lasips2: implement lasips2_realize()Mark Cave-Ayland1-3/+8
Move ps2_kbd_init() and ps2_mouse_init() from lasips2_initfn() to lasips2_realize. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-46-mark.cave-ayland@ilande.co.uk>
2022-06-26lasips2: add base propertyMark Cave-Ayland2-1/+17
This is in preparation for handling vmstate_register() within the device. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-45-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26lasips2: move initialisation of PS2 ports from lasi_initfn() to lasi_init()Mark Cave-Ayland1-3/+5
This can be improved once the ps2_kbd_init() and ps2_mouse_init() functions have been removed, but for now move the existing logic from lasi_initfn() to lasi_init(). At the same time explicitly set keyboard port id to 0, even if it isn't technically required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-44-mark.cave-ayland@ilande.co.uk>
2022-06-26lasips2: move mapping of LASIPS2 registers to HPPA machineMark Cave-Ayland3-10/+11
Now that the register memory regions are exposed as SysBus memory regions, move the mapping of the LASIPS2 registers from lasips2_initfn() to the HPPA machine (which is its only user). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-43-mark.cave-ayland@ilande.co.uk>
2022-06-26lasips2: implement lasips2_init() functionMark Cave-Ayland1-4/+14
Move the initialisation of the keyboard and mouse memory regions to lasips2_init() and expose them as SysBus memory regions. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-42-mark.cave-ayland@ilande.co.uk>
2022-06-26lasips2: rename lasips2_init() to lasips2_initfn() and update it to return ↵Mark Cave-Ayland3-5/+8
the LASIPS2 device When QOMifying a device it is typical to use _init() as the suffix for an instance_init function, however this name is already in use by the legacy LASIPS2 wrapper function. Eventually the wrapper function will be removed, but for now rename it to lasips2_initfn() to avoid a naming collision. At the same time update lasips2_initfn() return the LASIPS2 device so that it can later be accessed using qdev APIs by the HPPA machine. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-41-mark.cave-ayland@ilande.co.uk>
2022-06-26lasips2: move lasips2 QOM types from lasips2.c to lasips2.hMark Cave-Ayland2-23/+22
This allows the QOM types in lasips2.c to be used elsewhere by simply including lasips2.h. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-40-mark.cave-ayland@ilande.co.uk>
2022-06-26lasips2: QOMify LASIPS2StateMark Cave-Ayland1-3/+26
Currently lasip2_init() creates a new LASIPS2State directly which is used by the HPPA machine. Introduce a new LASIPS2 QOM type that will soon be used to allow the HPPA machine to be wired up using standard qdev GPIOs. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-39-mark.cave-ayland@ilande.co.uk>
2022-06-26pl050: add QEMU interface commentMark Cave-Ayland1-0/+8
This describes the PL050 device interface implemented within QEMU. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220624134109.881989-38-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26pl050: switch over from update_irq() function to PS2 device gpioMark Cave-Ayland1-3/+11
Add a new pl050_init() function which initialises a qdev input gpio for handling incoming PS2 IRQs, and then wire up the PS2 device to use it. At the same time set update_irq() and update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any accidental attempt to use the legacy update_irq() function will cause a NULL pointer dereference. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-37-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26pckbd: replace irq_kbd and irq_mouse with qemu_irq array in KBDStateMark Cave-Ayland2-8/+10
This allows both IRQs to be declared as a single qdev gpio array. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-36-mark.cave-ayland@ilande.co.uk>
2022-06-26ps2: add gpio for output IRQ and optionally use it in ps2_raise_irq() and ↵Mark Cave-Ayland2-2/+23
ps2_lower_irq() Define the gpio for the PS2 output IRQ in ps2_init() and add logic to optionally use it in ps2_raise_irq() and ps2_lower_irq() if the gpio is connected. If the gpio is not connected then call the legacy update_irq() function as before. This allows the incremental conversion of devices from the legacy update_irq() function to use gpios instead. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-35-mark.cave-ayland@ilande.co.uk>
2022-06-26ps2: introduce ps2_lower_irq() instead of calling update_irq() directlyMark Cave-Ayland1-2/+7
This consolidates the logic of lowering the PS2 IRQ into one single function. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-34-mark.cave-ayland@ilande.co.uk>
2022-06-26ps2: use ps2_raise_irq() instead of calling update_irq() directlyMark Cave-Ayland1-1/+1
This consolidates the logic of raising the PS2 IRQ into one single function. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-33-mark.cave-ayland@ilande.co.uk>
2022-06-26ps2: make ps2_raise_irq() function staticMark Cave-Ayland2-2/+1
This function is no longer used outside of ps2.c and so can be declared static. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-32-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: move ps2_kbd_init() and ps2_mouse_init() to i8042_mmio_realize()Mark Cave-Ayland1-3/+3
Move ps2_kbd_init() and ps2_mouse_init() from i8042_mm_init() to i8042_mmio_realize() to further reduce the initialisation logic done in i8042_mm_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-31-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: more vmstate_register() from i8042_mm_init() to i8042_mmio_realize()Mark Cave-Ayland1-2/+3
Note in this case it is not possible to register a (new) VMStateDescription in the DeviceClass without breaking migration compatibility for the MIPS magnum machine. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-30-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26pckbd: move mapping of I8042_MMIO registers to MIPS magnum machineMark Cave-Ayland3-10/+9
Now that the register memory region is exposed as a SysBus memory region, move the mapping of the I8042_MMIO registers from i8042_mm_init() to the MIPS magnum machine (which is its only user). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-29-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: alter i8042_mm_init() to return a I8042_MMIO deviceMark Cave-Ayland2-6/+8
This exposes the I8042_MMIO device to the caller to allow the register memory region to be mapped outside of i8042_mm_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-28-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: implement i8042_mmio_init() functionMark Cave-Ayland1-2/+9
This enables use to set the required value of extended_state directly during device init rather than in i8042_mm_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-27-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26pckbd: implement i8042_mmio_realize() functionMark Cave-Ayland2-1/+14
Move the initialisation of the register memory region to the I8042_MMIO device realize function and expose it using sysbus_init_mmio(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-26-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: add size qdev property to I8042_MMIO deviceMark Cave-Ayland2-0/+3
This will soon be used to set the size of the register memory region using a qdev property. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-25-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: add mask qdev property to I8042_MMIO deviceMark Cave-Ayland1-1/+7
This allows the KBDState mask value to be set using a qdev property rather than directly in i8042_mm_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-24-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: implement i8042_mmio_reset() for I8042_MMIO deviceMark Cave-Ayland1-1/+9
This allows the I8042_MMIO reset function to be registered directly within the DeviceClass rather than using qemu_register_reset() directly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-23-mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-26pckbd: introduce new I8042_MMIO QOM typeMark Cave-Ayland2-1/+31
Currently i8042_mm_init() creates a new KBDState directly which is used by the MIPS magnum machine. Introduce a new I8042_MMIO QOM type that will soon be used to allow the MIPS magnum machine to be wired up using standard qdev GPIOs. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220624134109.881989-22-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: move ISAKBDState from pckbd.c to i8042.hMark Cave-Ayland2-10/+10
This allows the QOM types in pckbd.c to be used elsewhere by simply including i8042.h. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-21-mark.cave-ayland@ilande.co.uk>
2022-06-26pckbd: move KBDState from pckbd.c to i8042.hMark Cave-Ayland2-24/+25
This allows the QOM types in pckbd.c to be used elsewhere by simply including i8042.h. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220624134109.881989-20-mark.cave-ayland@ilande.co.uk>
generated by cgit v1.1 at 2025-01-11 22:22:33 +0000