aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-05-02vga: update vga register setup on vbe changesGerd Hoffmann1-0/+1
Call the new vbe_update_vgaregs() function on vbe configuration changes, to make sure vga registers are up-to-date. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-02vga: factor out vga register setupGerd Hoffmann1-34/+44
When enabling vbe mode qemu will setup a bunch of vga registers to make sure the vga emulation operates in correct mode for a linear framebuffer. Move that code to a separate function so we can call it from other places too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-02vga: add vbe_enabled() helperGerd Hoffmann1-4/+9
Makes code a bit easier to read. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-02vga: fix banked access bounds checking (CVE-2016-3710)Gerd Hoffmann1-6/+18
vga allows banked access to video memory using the window at 0xa00000 and it supports a different access modes with different address calculations. The VBE bochs extentions support banked access too, using the VBE_DISPI_INDEX_BANK register. The code tries to take the different address calculations into account and applies different limits to VBE_DISPI_INDEX_BANK depending on the current access mode. Which is probably effective in stopping misprogramming by accident. But from a security point of view completely useless as an attacker can easily change access modes after setting the bank register. Drop the bogus check, add range checks to vga_mem_{readb,writeb} instead. Fixes: CVE-2016-3710 Reported-by: Qinghao Tang <luodalongde@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-02configure: Check if struct fsxattr is available from linux headerJan Vesely1-0/+23
Fixes build failure with --enable-xfsctl and new linux headers (>=4.5) and older xfsprogs(<4.5): In file included from /usr/include/xfs/xfs.h:38:0, from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:97: /usr/include/xfs/xfs_fs.h:42:8: error: redefinition of ‘struct fsxattr’ struct fsxattr { ^ In file included from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:60:0: /usr/include/linux/fs.h:155:8: note: originally defined here struct fsxattr { This is really a bug in the system headers, but we can work around it by defining HAVE_FSXATTR in the QEMU headers if linux/fs.h provides the struct, so that xfs_fs.h doesn't try to define it as well. CC: qemu-trivial@nongnu.org CC: Markus Armbruster <armbru@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Stefan Weil <sw@weilnetz.de> Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Jan Vesely <jano.vesely@gmail.com> [PMM: adjusted commit message, comments] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-01Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-3/+2
acpi: last minute fix for 2.6 Minor, obvious fix only affecting BE hosts. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 01 May 2016 13:43:28 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: acpi: fix bios linker loadder COMMAND_ALLOCATE on bigendian host Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-01acpi: fix bios linker loadder COMMAND_ALLOCATE on bigendian hostIgor Mammedov1-3/+2
'make check' fails with: ERROR:tests/bios-tables-test.c:493:load_expected_aml: assertion failed: (g_file_test(aml_file, G_FILE_TEST_EXISTS)) since commit: caf50c7166a6ed96c462ab5db4b495e1234e4cc6 tests: pc: acpi: drop not needed 'expected SSDT' blobs Assert happens because qemu-system-x86_64 generates SSDT table and test looks for a corresponding expected table to compare with. However there is no expected SSDT blob anymore, since QEMU souldn't generate one. As it happens BIOS is not able to read ACPI tables from QEMU and fallbacks to embeded legacy ACPI codepath, which generates SSDT. That happens due to wrongly sized endiannes conversion which makes uint8_t BiosLinkerLoaderEntry.alloc.zone end up with 0 due to truncation of 32 bit integer which on host is 1 or 2. Fix it by dropping invalid cpu_to_le32() as uint8_t doesn't require any conversion. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1330174 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-04-29Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell1-1/+8
vvfat fixes for 2.6.0-rc4 # gpg: Signature made Fri 29 Apr 2016 10:52:13 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: vvfat: Fix default volume label vvfat: Fix volume name assertion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-29Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-04-29' into ↵Peter Maydell1-1/+1
staging QAPI patches for 2016-04-29 # gpg: Signature made Fri 29 Apr 2016 10:13:08 BST using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-qapi-2016-04-29: qapi: Don't pass NULL to printf in string input visitor Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-29vvfat: Fix default volume labelKevin Wolf1-0/+2
Commit d5941dd documented that it leaves the default volume name as it was ("QEMU VVFAT"), but it doesn't actually implement this. You get an empty name (eleven space characters) instead. This fixes the implementation to apply the advertised default. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-04-29vvfat: Fix volume name assertionKevin Wolf1-1/+6
Commit d5941dd made the volume name configurable, but it didn't consider that the rw code compares the volume name string to assert that the first directory entry is the volume name. This made vvfat crash in rw mode. This fixes the assertion to compare with the configured volume name instead of a literal string. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-04-29qapi: Don't pass NULL to printf in string input visitorEric Blake1-1/+1
Make sure the error message for visit_type_uint64() gracefully handles a NULL 'name' when called from the top level or a list context, as not all the world behaves like glibc in allowing NULL through a printf-family %s. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-21-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28slirp: fix guest network access with darwin hostSamuel Thibault4-3/+15
On Darwin, connect, sendto and friends want the exact size of the sockaddr, not more (and in particular, not sizeof(struct sockaddr_storaget)) This commit adds the sockaddr_size helper to be used when passing a sockaddr size to such function, and makes use of it int sendto and connect calls. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: John Arbuckle <programmingkidx@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-28Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160428' into stagingPeter Maydell1-8/+8
MIPS patches 2016-04-28 Changes: * fixed RDHWR exception host PC # gpg: Signature made Thu 28 Apr 2016 10:11:18 BST using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" * remotes/lalrae/tags/mips-20160428: target-mips: Fix RDHWR exception host PC Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-28Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-04-28' ↵Peter Maydell8-43/+26
into staging Fix dangling pointers and error message regressions # gpg: Signature made Thu 28 Apr 2016 07:25:51 BST using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2016-04-28: qom: -object error messages lost location, restore it replay: Fix dangling location bug in replay_configure() QemuOpts: Fix qemu_opts_foreach() dangling location regression Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-28Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160426' ↵Peter Maydell2-5/+14
into staging ppc patch queue for 2016-04-26 (last minute qemu-2.6 fix) This just has one, last-minute, fix for a serious regression of memory hotplug. Patch author's comment: Really sorry for the way last-minute fix, but without this memory hotplug is totally broken :( Hoping to get this in for Wednesday's RC4, which I think will be the final before release. # gpg: Signature made Tue 26 Apr 2016 03:52:20 BST using RSA key ID 20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.6-20160426: spapr_drc: fix aborts during DRC-count based hotplug Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-28target-mips: Fix RDHWR exception host PCJames Hogan1-8/+8
Commit b00c72180c36 ("target-mips: add PC, XNP reg numbers to RDHWR") changed the rdhwr helpers to use check_hwrena() to check the register being accessed is enabled in CP0_HWREna when used from user mode. If that check fails an EXCP_RI exception is raised at the host PC calculated with GETPC(). However check_hwrena() may not be fully inlined as the do_raise_exception() part of it is common regardless of the arguments. This causes GETPC() to calculate the address in the call in the helper instead of the generated code calling the helper. No TB will be found and the EPC reported with the resulting guest RI exception points to the beginning of the TB instead of the RDHWR instruction. We can't reliably force check_hwrena() to be inlined, and converting it to a macro would be ugly, so instead pass the host PC in as an argument, with each rdhwr helper passing GETPC(). This should avoid any dependence on compiler behaviour, and in practice seems to ensure the full inlining of check_hwrena() on x86_64. This issue causes failures when running a MIPS KVM (trap & emulate) guest in a MIPS QEMU TCG guest, as the inner guest kernel will do a RDHWR of counter, which is disabled in the outer guest's CP0_HWREna by KVM so it can emulate the inner guest's counter. The emulation fails and the RI exception is passed to the inner guest. Fixes: b00c72180c36 ("target-mips: add PC, XNP reg numbers to RDHWR") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-04-28qom: -object error messages lost location, restore itMarkus Armbruster6-39/+21
qemu_opts_foreach() runs its callback with the error location set to the option's location. Any errors the callback reports use the option's location automatically. Commit 90998d5 moved the actual error reporting from "inside" qemu_opts_foreach() to after it. Here's a typical hunk: if (qemu_opts_foreach(qemu_find_opts("object"), - object_create, - object_create_initial, NULL)) { + user_creatable_add_opts_foreach, + object_create_initial, &err)) { + error_report_err(err); exit(1); } Before, object_create() reports from within qemu_opts_foreach(), using the option's location. Afterwards, we do it after qemu_opts_foreach(), using whatever location happens to be current there. Commonly a "none" location. This is because Error objects don't have location information. Problematic. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar qemu-system-x86_64: Property '.foo' not found Note no location. This commit restores it: qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found Note that the qemu_opts_foreach() bug just fixed could mask the bug here: if the location it leaves dangling hasn't been clobbered, yet, it's the correct one. Reported-by: Eric Blake <eblake@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Paragraph on Error added to commit message]
2016-04-28replay: Fix dangling location bug in replay_configure()Markus Armbruster1-1/+2
replay_configure() pushes and pops a Location with automatic storage duration. Except it fails to pop when -icount parameter "rr" isn't given. cur_loc then points to unused stack space, and will most likely get clobbered in short order. Clobbered cur_loc can make loc_pop() and error_print_loc() crash or report bogus locations. Broken in commit 890ad55. I didn't take the time to find a reproducer. Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-04-28QemuOpts: Fix qemu_opts_foreach() dangling location regressionMarkus Armbruster1-3/+3
qemu_opts_foreach() pushes and pops a Location with automatic storage duration. Except it fails to pop when @func() returns non-zero. cur_loc then points to unused stack space, and will most likely get clobbered in short order. Clobbered cur_loc can make loc_pop() and error_print_loc() crash or report bogus locations. Affects several qemu command line options as well as qemu-img, qemu-io, qemu-nbd -object, and blkdebug's configuration file. Broken in commit a4c7367, v2.4.0. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar main() reports "Property '.foo' not found" like this: if (qemu_opts_foreach(qemu_find_opts("object"), user_creatable_add_opts_foreach, object_create_delayed, &err)) { error_report_err(err); exit(1); } cur_loc then points to where qemu_opts_foreach()'s Location used to be, i.e. unused stack space. With optimization, this Location doesn't get clobbered for me, and also happens to be the correct location. Without optimization, it does get clobbered in a way that makes error_report_err() report no location. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-04-26spapr_drc: fix aborts during DRC-count based hotplugMichael Roth2-5/+14
CPU/memory resources can be signalled en-masse via spapr_hotplug_req_add_by_count(), and when doing so, actually change the meaning of the 'drc' parameter passed to spapr_hotplug_req_event() to be a count rather than an index. f40eb92 added a hook in spapr_hotplug_req_event() to record when a device had been 'signalled' to the guest, but that code assumes that drc is always an index. In cases where it's a count, such as memory hotplug, the DRC lookup will fail, leading to an assert. Fix this by only explicitly setting the signalled state for cases where we are doing PCI hotplug. For other resources types, since we cannot selectively track whether a resource has been signalled in cases where we signal attach as a count, set the 'signalled' state to true immediately upon making the resource available via drck->attach(). Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: david@gibson.dropbear.id.au Cc: qemu-ppc@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-25usb/uhci: move pid checkGerd Hoffmann1-13/+13
commit "5f77e06 usb: add pid check at the first of uhci_handle_td()" moved the pid verification to the start of the uhci_handle_td function, to simplify the error handling (we don't have to free stuff which we didn't allocate in the first place ...). Problem is now the check fires too often, it raises error IRQs even for TDs which we are not going to process because they are not set active. So, lets move down the check a bit, so it is done only for active TDs, but still before we are going to allocate stuff to process the requested transfer. Reported-by: Joe Clifford <joe@thunderbug.co.uk> Tested-by: Joe Clifford <joe@thunderbug.co.uk> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1461321893-15811-1-git-send-email-kraxel@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-25Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160423' ↵Peter Maydell2-5/+7
into staging ppc patch queue for 2016-03-23 A single fix for a bug in parameter handling for the spapr PCI host bridge. # gpg: Signature made Sat 23 Apr 2016 07:55:29 BST using RSA key ID 20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.6-20160423: hw/ppc/spapr: Fix crash when specifying bad parameters to spapr-pci-host-bridge Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-23hw/ppc/spapr: Fix crash when specifying bad parameters to spapr-pci-host-bridgeThomas Huth2-5/+7
QEMU currently crashes when using bad parameters for the spapr-pci-host-bridge device: $ qemu-system-ppc64 -device spapr-pci-host-bridge,buid=0x123,liobn=0x321,mem_win_addr=0x1,io_win_addr=0x10 Segmentation fault The problem is that spapr_tce_find_by_liobn() might return NULL, but the code in spapr_populate_pci_dt() does not check for this condition and then tries to dereference this NULL pointer. Apart from that, the return value of spapr_populate_pci_dt() also has to be checked for all PCI buses, not only for the last one, to make sure we catch all errors. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-22Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell13-12/+56
Mirror block job fixes for 2.6.0-rc4 # gpg: Signature made Fri 22 Apr 2016 15:46:41 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: mirror: Workaround for unexpected iohandler events during completion aio-posix: Skip external nodes in aio_dispatch virtio: Mark host notifiers as external event-notifier: Add "is_external" parameter iohandler: Introduce iohandler_get_aio_context Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-22mirror: Workaround for unexpected iohandler events during completionFam Zheng1-0/+9
Commit 5a7e7a0ba moved mirror_exit to a BH handler but didn't add any protection against new requests that could sneak in just before the BH is dispatched. For example (assuming a code base at that commit): main_loop_wait # 1 os_host_main_loop_wait g_main_context_dispatch aio_ctx_dispatch aio_dispatch ... mirror_run bdrv_drain (a) block_job_defer_to_main_loop qemu_iohandler_poll virtio_queue_host_notifier_read ... virtio_submit_multiwrite (b) blk_aio_multiwrite main_loop_wait # 2 <snip> aio_dispatch aio_bh_poll (c) mirror_exit At (a) we know the BDS has no pending request. However, the same main_loop_wait call is going to dispatch iohandlers (EventNotifier events), which may lead to a new I/O from guest. So the invariant is already broken at (c). Data loss. Commit f3926945c8 made iohandler to use aio API. The order of virtio_queue_host_notifier_read and block_job_defer_to_main_loop within a main_loop_wait becomes unpredictable, and even worse, if the host notifier event arrives at the next main_loop_wait call, the unpredictable order between mirror_exit and virtio_queue_host_notifier_read is also a trouble. As shown below, this commit made the bug easier to trigger: - Bug case 1: main_loop_wait # 1 os_host_main_loop_wait g_main_context_dispatch aio_ctx_dispatch (qemu_aio_context) ... mirror_run bdrv_drain (a) block_job_defer_to_main_loop aio_ctx_dispatch (iohandler_ctx) virtio_queue_host_notifier_read ... virtio_submit_multiwrite (b) blk_aio_multiwrite main_loop_wait # 2 ... aio_dispatch aio_bh_poll (c) mirror_exit - Bug case 2: main_loop_wait # 1 os_host_main_loop_wait g_main_context_dispatch aio_ctx_dispatch (qemu_aio_context) ... mirror_run bdrv_drain (a) block_job_defer_to_main_loop main_loop_wait # 2 ... aio_ctx_dispatch (iohandler_ctx) virtio_queue_host_notifier_read ... virtio_submit_multiwrite (b) blk_aio_multiwrite aio_dispatch aio_bh_poll (c) mirror_exit In both cases, (b) breaks the invariant wanted by (a) and (c). Until then, the request loss has been silent. Later, 3f09bfbc7be added asserts at (c) to check the invariant (in bdrv_replace_in_backing_chain), and Max reported an assertion failure first visible there, by doing active committing while the guest is running bonnie++. 2.5 added bdrv_drained_begin at (a) to protect the dataplane case from similar problems, but we never realize the main loop bug until now. As a bandage, this patch disables iohandler's external events temporarily together with bs->ctx. Launchpad Bug: 1570134 Cc: qemu-stable@nongnu.org Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22aio-posix: Skip external nodes in aio_dispatchFam Zheng1-2/+6
aio_poll doesn't poll the external nodes so this should never be true, but aio_ctx_dispatch may get notified by the events from GSource. To make bdrv_drained_begin effective in main loop, we should check the is_external flag here too. Also do the check in aio_pending so aio_dispatch is not called superfluously, when there is no events other than external ones. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22virtio: Mark host notifiers as externalFam Zheng1-2/+2
The effect of this change is the block layer drained section can work, for example when mirror job is being completed. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22event-notifier: Add "is_external" parameterFam Zheng7-10/+25
All callers pass "false" keeping the old semantics. The windows implementation doesn't distinguish the flag yet. On posix, it is passed down to the underlying aio context. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22iohandler: Introduce iohandler_get_aio_contextFam Zheng4-0/+16
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22util: align memory allocations to 2M on AArch64Christoffer Dall1-1/+2
For KVM to use Transparent Huge Pages (THP) we have to ensure that the alignment of the userspace address of the KVM memory slot and the IPA that the guest sees for a memory region have the same offset from the 2M huge page size boundary. One way to achieve this is to always align the IPA region at a 2M boundary and ensure that the mmap alignment is also at 2M. Unfortunately, we were only doing this for __arm__, not for __aarch64__, so add this simple condition. This fixes a performance regression using KVM/ARM on AArch64 platforms that showed a performance penalty of more than 50%, introduced by the following commit: 9fac18f (oslib: allocate PROT_NONE pages on top of RAM, 2015-09-10) We were only lucky before the above commit, because we were allocating large regions and naturally getting a 2M alignment on those allocations then. Cc: qemu-stable@nongnu.org Reported-by: Shih-Wei Li <shihwei@cs.columbia.edu> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: wrapped long line] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-22nbd: Don't mishandle unaligned client requestsEric Blake1-6/+4
The NBD protocol does not (yet) force any alignment constraints on clients. Even though qemu NBD clients always send requests that are aligned to 512 bytes, we must be prepared for non-qemu clients that don't care about alignment (even if it means they are less efficient). Our use of blk_read() and blk_write() was silently operating on the wrong file offsets when the client made an unaligned request, corrupting the client's data (but as the client already has control over the file we are serving, I don't think it is a security hole, per se, just a data corruption bug). Note that in the case of NBD_CMD_READ, an unaligned length could cause us to return up to 511 bytes of uninitialized trailing garbage from blk_try_blockalign() - hopefully nothing sensitive from the heap's prior usage is ever leaked in that manner. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1461249750-31928-1-git-send-email-eblake@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21Update version for v2.6.0-rc3 releasev2.6.0-rc3Peter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: check for CONFIG_DEBUG_TCG instead of NDEBUGAurelien Jarno10-17/+12
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: use tcg_debug_assert instead of assert (fix performance regression)Aurelien Jarno11-93/+93
The TCG code is quite performance sensitive, but at the same time can also be quite tricky. That is why asserts that can be enabled with the --enable-debug-tcg configure option. This used to work the following way: | #include "config.h" | | ... | | #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG) | /* define it to suppress various consistency checks (faster) */ | #define NDEBUG | #endif | | ... | | #include <assert.h> Since commit 757e725b (tcg: Clean up includes) "config.h" as been replaced by "qemu/osdep.h" which itself includes <assert.h>. As a consequence the assertions are always enabled, even when using --disable-debug-tcg, causing a performance regression, especially on targets with many registers. For instance on qemu-system-ppc the speed difference is about 15%. tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already uses in some places. This patch replaces all the calls to assert into calss to tcg_debug_assert. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21hw/arm/boot: always clear r0 when booting kernelsSylvain Garrigues1-1/+1
The 32-bit ARM Linux kernel booting ABI requires that r0 is 0 when calling the kernel image. A bug in commit 10b8ec73e610e01 meant that for boards which use the write_board_setup hook (which means "highbank", "midway", "raspi2" and "xilinx-zynq-a9") we were incorrectly skipping the "clear r0" instruction in the mini-bootloader. Use the right offset in the "add lr, pc, #n" instruction so that we return from the board-setup code to the correct place. Signed-off-by: Sylvain Garrigues <sylvain@sylvaingarrigues.com> [PMM: Expanded commit message] Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21MAINTAINERS: Avoid using K: for NUMA sectionEduardo Habkost1-2/+0
When using K: in MAINTAINERS, false positives makes get_maintainer.pl not use git history to find contributors. As those patterns cause lots of false positives they are causing more harm than good, so remove them. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 1461164130-3847-1-git-send-email-ehabkost@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-20Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell6-36/+127
Mirror block job fixes for 2.6.0-rc3 # gpg: Signature made Wed 20 Apr 2016 15:56:43 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: iotests: Test case for drive-mirror with unaligned image size iotests: Add iotests.image_size mirror: Don't extend the last sub-chunk block/mirror: Refresh stale bitmap iterator cache block/mirror: Revive dead yielding code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-20Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2016-04-20' into ↵Peter Maydell1-1/+1
staging Xen 2016/04/20 # gpg: Signature made Wed 20 Apr 2016 12:08:56 BST using RSA key ID 70E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" * remotes/sstabellini/tags/xen-2016-04-20: xenfb: use the correct condition to avoid excessive looping Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-20iotests: Test case for drive-mirror with unaligned image sizeFam Zheng3-0/+68
This is the regression test for the virtual size mismatch issue between target and source images. [ kwolf: Added test_unaligned_with_update ] Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2016-04-20iotests: Add iotests.image_sizeFam Zheng1-0/+6
This retrieves the virtual size of the image out of qemu-img info. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-20mirror: Don't extend the last sub-chunkFam Zheng2-26/+37
The last sub-chunk is rounded up to the copy granularity in the target image, resulting in a larger size than the source. Add a function to clip the copied sectors to the end. This undoes the "wrong" changes to tests/qemu-iotests/109.out in e5b43573e28. The remaining two offset changes are okay. [ kwolf: Use DIV_ROUND_UP to calculate nb_chunks now ] Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2016-04-20block/mirror: Refresh stale bitmap iterator cacheMax Reitz1-0/+5
If the drive's dirty bitmap is dirtied while the mirror operation is running, the cache of the iterator used by the mirror code may become stale and not contain all dirty bits. This only becomes an issue if we are looking for contiguously dirty chunks on the drive. In that case, we can easily detect the discrepancy and just refresh the iterator if one occurs. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-20block/mirror: Revive dead yielding codeMax Reitz1-11/+12
mirror_iteration() is supposed to wait if the current chunk is subject to a still in-flight mirroring operation. However, it mixed checking this conflict situation with checking the dirty status of a chunk. A simplification for the latter condition (the first chunk encountered is always dirty) led to neglecting the former: We just skip the first chunk and thus never test whether it conflicts with an in-flight operation. To fix this, pull out the code which waits for in-flight operations on the first chunk of the range to be mirrored to settle. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-20Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2016-04-19-tag' ↵Peter Maydell1-1/+3
into staging qemu-ga patch queue for 2.6 * fixes inadvertant change that unconditionally disables qemu-ga unit test * fixes make check failures when building with --disable-guest-agent that were present visible before the unit test was inadvertantly disabled. # gpg: Signature made Tue 19 Apr 2016 23:30:09 BST using RSA key ID F108B584 # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" # gpg: aka "Michael Roth <mdroth@utexas.edu>" # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" * remotes/mdroth/tags/qga-pull-2016-04-19-tag: qemu-ga: do not run qga test when guest agent disabled Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-20Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into stagingPeter Maydell2-13/+72
# gpg: Signature made Tue 19 Apr 2016 17:28:01 BST using RSA key ID C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" * remotes/cody/tags/block-pull-request: block/gluster: prevent data loss after i/o error block/gluster: code movement of qemu_gluster_close() block/gluster: return correct error value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-19qemu-ga: do not run qga test when guest agent disabledYang Hongyang1-1/+3
When configure with --disable-guest-agent, make check will fail with: ERROR:tests/test-qga.c:74:fixture_setup: assertion failed (error == NULL): Failed to execute child process "/home/xx/qemu/qemu-ga" (No such file or directory) (g-exec-error-quark, 8) make: *** [check-tests/test-qga] Error 1 This check was commented out by bab47d9a75a. I think that was by mistake, because the commit message of that commit didn't mention this change. Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: qemu-stable@nongnu.org
2016-04-19Update language files for QEMU 2.6.0Peter Maydell7-127/+127
Update translation files (change created via 'make -C po update'). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1461059023-14470-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Stefan Weil <sw@weilnetz.de>
2016-04-19block/gluster: prevent data loss after i/o errorJeff Cody2-1/+60
Upon receiving an I/O error after an fsync, by default gluster will dump its cache. However, QEMU will retry the fsync, which is especially useful when encountering errors such as ENOSPC when using the werror=stop option. When using caching with gluster, however, the last written data will be lost upon encountering ENOSPC. Using the write-behind-cache xlator option of 'resync-failed-syncs-after-fsync' should cause gluster to retain the cached data after a failed fsync, so that ENOSPC and other transient errors are recoverable. Unfortunately, we have no way of knowing if the 'resync-failed-syncs-after-fsync' xlator option is supported, so for now close the fd and set the BDS driver to NULL upon fsync error. Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-04-19block/gluster: code movement of qemu_gluster_close()Jeff Cody1-11/+11
Move qemu_gluster_close() further up in the file, in preparation for the next patch, to avoid a forward declaration. Signed-off-by: Jeff Cody <jcody@redhat.com>
generated by cgit v1.1 at 2024-11-01 12:06:18 +0000