aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-06-02i.MX: Rename i.MX FEC defines to ENET_XXXJean-Christophe Dubois2-59/+59
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02i.MX: reset TX/RX descriptors when FEC is disabled.Jean-Christophe Dubois1-0/+2
According to the FEC chapter of i.MX25 reference manual RX adn TX descriptors are reseted when the FEC device is disabled through ECR. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02i.MX: Fix FEC code for ECR register reset value.Jean-Christophe Dubois1-1/+1
According to the FEC chapter of i.MX25 reference manual ECR register is initialized at 0xf0000000 at reset time. We fix the value. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02i.MX: Fix FEC code for MDIO address selectionJean-Christophe Dubois1-2/+2
According to the FEC chapter of i.MX25 reference manual When writing to MMFR register, the MDIO device and adress are selected by bit 27 to 23 and bit 22 to 18 respectively. This is a total of 10 bits that need to be used by the Phy chip/address decoding function. This patch fixes the number of bits used from 9 to 10. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02i.MX: Fix FEC code for MDIO operation selectionJean-Christophe Dubois1-3/+3
According to the FEC chapter of i.MX25 reference manual When writing the MMFR register, bit 29 and 28 select the requested operation. * 10 means read operation with valid MII mgmt frame * 11 means read operation with non compliant MII mgmt frame * 01 means write operation with valid MII mgmt frame * 00 means write operation with non compliant MII mgmt frame So while bit 28 does change beween read/write for valid MII mgmt frame, the mening is inverted for non compliant MII mgmt frame. Bit 29 on the other hand means read/write whatever the type of mgmt frame involved. So this patch change the operation selection from bit 28 to bit 29 as it is more generic. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net: handle optional VLAN header in checksum computation.Jean-Christophe Dubois1-4/+31
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net: improve UDP/TCP checksum computation.Jean-Christophe Dubois1-27/+67
* based on Eth, UDP, TCP struct present in eth.h instead of hardcoded indexes and sizes. * based on various macros present in eth.h. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02e1000e: Introduce qtest for e1000e deviceDmitry Fleytman2-0/+482
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net: Introduce e1000e device emulationDmitry Fleytman8-0/+4532
This patch introduces emulation for the Intel 82574 adapter, AKA e1000e. This implementation is derived from the e1000 emulation code, and utilizes the TX/RX packet abstractions that were initially developed for the vmxnet3 device. Although some parts of the introduced code may be shared with e1000, the differences are substantial enough so that the only shared resources for the two devices are the definitions in hw/net/e1000_regs.h. Similarly to vmxnet3, the new device uses virtio headers for task offloads (for backends that support virtio extensions). Usage of virtio headers may be forcibly disabled via a boolean device property "vnet" (which is enabled by default). In such case task offloads will be performed in software, in the same way it is done on backends that do not support virtio headers. The device code is split into two parts: 1. hw/net/e1000e.c: QEMU-specific code for a network device; 2. hw/net/e1000e_core.[hc]: Device emulation according to the spec. The new device name is e1000e. Intel specifications for the 82574 controller are available at: http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf Throughput measurement results (iperf2): Fedora 22 guest, TCP, RX 4 ++------------------------------------------+ | | | X X X X X 3.5 ++ X X X X | | X | | | 3 ++ | G | X | b | | / 2.5 ++ | s | | | | 2 ++ | | | | | 1.5 X+ | | | + + + + + + + + + + + + 1 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, TCP, TX 18 ++-------------------------------------------+ | X | 16 ++ X X X X X | X | 14 ++ | | | 12 ++ | G | X | b 10 ++ | / | | s 8 ++ | | | 6 ++ X | | | 4 ++ | | X | 2 ++ X | X + + + + + + + + + + + 0 ++--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, UDP, RX 3 ++------------------------------------------+ | X | | 2.5 ++ | | | | | 2 ++ X | G | | b | | / 1.5 ++ | s | X | | | 1 ++ | | | | X | 0.5 ++ | | X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Fedora 22 guest, UDP, TX 1 ++------------------------------------------+ | X 0.9 ++ | | | 0.8 ++ | 0.7 ++ | | | G 0.6 ++ | b | | / 0.5 ++ | s | X | 0.4 ++ | | | 0.3 ++ | 0.2 ++ X | | | 0.1 ++ X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, TCP, RX 3.2 ++------------------------------------------+ | X | 3 ++ | | | 2.8 ++ | | | 2.6 ++ X | G | X X X X X b 2.4 ++ X X | / | | s 2.2 ++ | | | 2 ++ | | X X | 1.8 ++ | | | 1.6 X+ | + + + + + + + + + + + + 1.4 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, TCP, TX 14 ++-------------------------------------------+ | | | X X 12 ++ | | | 10 ++ | | | G | | b 8 ++ | / | X | s 6 ++ | | | | | 4 ++ X | | | 2 ++ | | X X X | + X X + + X X + + + + + 0 X+--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, UDP, RX 1.6 ++------------------------------------------X | | 1.4 ++ | | | 1.2 ++ | | X | | | G 1 ++ | b | | / 0.8 ++ | s | | 0.6 ++ X | | | 0.4 ++ | | X | | | 0.2 ++ X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, UDP, TX 0.6 ++------------------------------------------+ | X | | 0.5 ++ | | | | | 0.4 ++ | G | | b | | / 0.3 ++ X | s | | | | 0.2 ++ | | | | X | 0.1 ++ | | X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02e1000: Move out code that will be reused in e1000eDmitry Fleytman6-320/+591
Code that will be shared moved to a separate files. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02e1000_regs: Add definitions for Intel 82574-specific bitsDmitry Fleytman1-3/+342
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*Dmitry Fleytman3-28/+44
To make this device and network packets abstractions ready for IOMMU. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net_pkt: Extend packet abstraction as required by e1000e functionalityDmitry Fleytman9-205/+1336
This patch extends the TX/RX packet abstractions with features that will be used by the e1000e device implementation. Changes are: 1. Support iovec lists for RX buffers 2. Deeper RX packets parsing 3. Loopback option for TX packets 4. Extended VLAN headers handling 5. RSS processing for RX packets Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02rtl8139: Move more TCP definitions to common headerDmitry Fleytman2-5/+8
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net_pkt: Name vmxnet3 packet abstractions more genericDmitry Fleytman8-198/+206
This patch drops "vmx" prefix from packet abstractions names to emphasize the fact they are generic and not tied to any specific network device. These abstractions will be reused by e1000e emulation implementation introduced by following patches so their names need generalization. This patch (except renamed files, adjusted comments and changes in MAINTAINTERS) was produced by: git grep -lz 'vmxnet_tx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_tx_pkt/net_tx_pkt/g" git grep -lz 'vmxnet_rx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_rx_pkt/net_rx_pkt/g" git grep -lz 'VmxnetTxPkt' | xargs -0 perl -i'' -pE "s/VmxnetTxPkt/NetTxPkt/g" git grep -lz 'VMXNET_TX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_TX_PKT/NET_TX_PKT/g" git grep -lz 'VmxnetRxPkt' | xargs -0 perl -i'' -pE "s/VmxnetRxPkt/NetRxPkt/g" git grep -lz 'VMXNET_RX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_RX_PKT/NET_RX_PKT/g" sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_rx_pkt.c sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_tx_pkt.c Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02vmxnet3: Use common MAC address tracing macrosDmitry Fleytman2-7/+4
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net: Add macros for MAC address tracingDmitry Fleytman1-0/+5
These macros will be used by future commits introducing e1000e device emulation and by vmxnet3 tracing code. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net: Introduce Toeplitz hash calculatorDmitry Fleytman1-0/+45
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02vmxnet3: Use generic function for DSN capability definitionDmitry Fleytman1-7/+5
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02pcie: Introduce function for DSN capability creationDmitry Fleytman2-0/+11
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02pcie: Add support for PCIe CAP v1Dmitry Fleytman3-20/+73
Added support for PCIe CAP v1, while reusing some of the existing v2 infrastructure. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02pci: Introduce define for PM capability version 1.1Dmitry Fleytman1-0/+2
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02msix: make msix_clr_pending() visible for clientsDmitry Fleytman2-1/+2
This function will be used by e1000e device code. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02pci: fix unaligned access in pci_xxx_quad()Dmitry Fleytman1-2/+9
Replace legacy cpu_to_le64w()/le64_to_cpup() calls with stq_le_p()/ldq_le_p(). Motivation for this modification is that follow up patches add utility function pcie_dev_ser_num_init() for PCIe DSN capability creation which uses pci_set_quad() with a misaligned offset. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01net/net: Add SocketReadState for reuse codesZhang Chen4-105/+121
This function is from net/socket.c, move it to net.c and net.h. Add SocketReadState to make others reuse net_fill_rstate(). suggestion from jason. v4: - move 'rs->finalize = finalize' to rs_init() v3: - remove SocketReadState init callback - put finalize callback to net_fill_rstate() v2: - rename ReadState to SocketReadState - add SocketReadState init and finalize callback v1: - init patch Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01net: vl: Move default_net to vl.cEduardo Habkost3-25/+23
All handling of defaults (default_* variables) is inside vl.c, move default_net there too, so we can more easily refactor that code later. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-05-25net: mipsnet: check packet length against bufferPrasad J Pandit1-0/+3
When receiving packets over MIPSnet network device, it uses receive buffer of size 1514 bytes. In case the controller accepts large(MTU) packets, it could lead to memory corruption. Add check to avoid it. Reported by: Oleksandr Bazhaniuk <oleksandr.bazhaniuk@intel.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-05-25net/tap: Allocating Large sized arrays to heapZhou Jie1-2/+4
net_init_tap has a huge stack usage of 8192 bytes approx. Moving large arrays to heap to reduce stack usage. Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-05-24Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into ↵Peter Maydell13-300/+401
staging X86 queue, 2016-05-23 # gpg: Signature made Mon 23 May 2016 23:48:27 BST using RSA key ID 984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" * remotes/ehabkost/tags/x86-pull-request: target-i386: kvm: Eliminate kvm_msr_entry_set() target-i386: kvm: Simplify MSR setting functions target-i386: kvm: Simplify MSR array construction target-i386: kvm: Increase MSR_BUF_SIZE target-i386: kvm: Allocate kvm_msrs struct once per VCPU target-i386: Call cpu_exec_init() on realize target-i386: Move TCG initialization to realize time target-i386: Move TCG initialization check to tcg_x86_init() cpu: Eliminate cpudef_init(), cpudef_setup() target-i386: Set constant model_id for qemu64/qemu32/athlon pc: Set CPU model-id on compat_props for pc <= 2.4 osdep: Move default qemu_hw_version() value to a macro target-i386: kvm: Use X86XSaveArea struct for xsave save/load target-i386: Use xsave structs for ext_save_area target-i386: Define structs for layout of xsave area Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-24Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-1' ↵Peter Maydell14-134/+140
into staging migration fixes: - ensure src block devices continue fine after a failed migration - fail on migration blockers; helps 9p savevm/loadvm - move autoconverge commands out of experimental state - move the migration-specific qjson in migration/ # gpg: Signature made Mon 23 May 2016 18:15:09 BST using RSA key ID 657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" * remotes/amit-migration/tags/migration-2.7-1: migration: regain control of images when migration fails to complete savevm: fail if migration blockers are present migration: Promote improved autoconverge commands out of experimental state migration/qjson: Drop gratuitous use of QOM migration: Move qjson.[ch] to migration/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-24Merge remote-tracking branch 'remotes/amit-virtio-rng/tags/rng-2.7-1' into ↵Peter Maydell3-12/+12
staging rng: rename RndRandom to RndRandom # gpg: Signature made Mon 23 May 2016 16:44:58 BST using RSA key ID 657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" * remotes/amit-virtio-rng/tags/rng-2.7-1: rng-random: rename RndRandom to RngRandom Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-24Merge remote-tracking branch 'remotes/xtensa/tags/20160523-opencores_eth' ↵Peter Maydell1-18/+26
into staging opencores_eth cleanups: - use mii.h - reduce stack usage in open_eth_start_xmit. # gpg: Signature made Mon 23 May 2016 20:14:20 BST using RSA key ID F83FA044 # gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>" # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" * remotes/xtensa/tags/20160523-opencores_eth: hw/net/opencores_eth: Allocating Large sized arrays to heap hw/net/opencores_eth: use mii.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-23target-i386: kvm: Eliminate kvm_msr_entry_set()Eduardo Habkost1-9/+3
Inline the function inside kvm_msr_entry_add(). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: kvm: Simplify MSR setting functionsEduardo Habkost1-21/+6
Simplify kvm_put_tscdeadline_msr() and kvm_put_msr_feature_control() using kvm_msr_buf and the kvm_msr_entry_add() helper. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: kvm: Simplify MSR array constructionEduardo Habkost1-151/+140
Add a helper function that appends new entries to the MSR buffer and checks for the buffer size limit. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: kvm: Increase MSR_BUF_SIZEEduardo Habkost1-2/+3
We are dangerously close to the array limits in kvm_put_msrs() and kvm_get_msrs(): with the default mcg_cap configuration, we can set up to 148 MSRs in kvm_put_msrs(), and if we allow mcg_cap to be changed, we can write up to 236 MSRs. Use 4096 bytes for the buffer, that can hold 255 kvm_msr_entry structs. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: kvm: Allocate kvm_msrs struct once per VCPUEduardo Habkost2-18/+23
Instead of using 2400 bytes in the stack for 150 MSR entries in kvm_get_msrs() and kvm_put_msrs(), allocate a buffer once for each VCPU. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: Call cpu_exec_init() on realizeEduardo Habkost1-1/+2
QOM instance_init functions are not supposed to have any side-effects, as new objects may be created at any moment for querying property information (see qmp_device_list_properties()). Calling cpu_exec_init() also affects QEMU's ability to handle errors during CPU creation, as some actions done by cpu_exec_init() can't be reverted. Move cpu_exec_init() call to realize so a simple object_new() won't trigger it, and so that it is called after some basic validation of CPU parameters. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: Move TCG initialization to realize timeEduardo Habkost1-5/+4
QOM instance_init functions are not supposed to have any side-effects, as new objects may be created at any moment for querying property information (see qmp_device_list_properties()). Move TCG initialization to realize time so it won't be called when just doing object_new() on a X86CPU subclass. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: Move TCG initialization check to tcg_x86_init()Eduardo Habkost2-3/+7
Instead of requiring cpu.c to check if TCG was already initialized, simply let the function be called multiple times. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23cpu: Eliminate cpudef_init(), cpudef_setup()Eduardo Habkost7-27/+0
x86_cpudef_init() doesn't do anything anymore, cpudef_init(), cpudef_setup(), and x86_cpudef_init() can be finally removed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: Set constant model_id for qemu64/qemu32/athlonEduardo Habkost1-20/+3
Newer PC machines don't set hw_version, and older machines set model-id on compat_props explicitly, so we don't need the x86_cpudef_setup() code that sets model_id using qemu_hw_version() anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23hw/net/opencores_eth: Allocating Large sized arrays to heapZhou Jie1-1/+10
open_eth_start_xmit has a huge stack usage of 65536 bytes approx. Moving large arrays to heap to reduce stack usage. Reduce size of a buffer allocated on stack to 0x600 bytes, which is the maximal frame length when HUGEN bit is not set in MODER, only allocate buffer on heap when that is too small. Thus heap is not used in typical use case. Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-05-23hw/net/opencores_eth: use mii.hMax Filippov1-17/+16
Drop local definitions of MII registers and use constants from mii.h for registers and register bits. No functional changes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-05-23migration: regain control of images when migration fails to completeGreg Kurz1-2/+15
We currently have an error path during migration that can cause the source QEMU to abort: migration_thread() migration_completion() runstate_is_running() ----------------> true if guest is running bdrv_inactivate_all() ----------------> inactivate images qemu_savevm_state_complete_precopy() ... qemu_fflush() socket_writev_buffer() --------> error because destination fails qemu_fflush() -------------------> set error on migration stream migration_completion() -----------------> set migrate state to FAILED migration_thread() -----------------------> break migration loop vm_start() -----------------------------> restart guest with inactive images and you get: qemu-system-ppc64: socket_writev_buffer: Got err=104 for (32768/18446744073709551615) qemu-system-ppc64: /home/greg/Work/qemu/qemu-master/block/io.c:1342:bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed. Aborted (core dumped) If we try postcopy with a similar scenario, we also get the writev error message but QEMU leaves the guest paused because entered_postcopy is true. We could possibly do the same with precopy and leave the guest paused. But since the historical default for migration errors is to restart the source, this patch adds a call to bdrv_invalidate_cache_all() instead. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Message-Id: <146357896785.6003.11983081732454362715.stgit@bahia.huguette.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-23pc: Set CPU model-id on compat_props for pc <= 2.4Eduardo Habkost2-0/+42
Instead of relying on x86_cpudef_setup() calling qemu_hw_version(), just make old machines set model-id explicitly on compat_props for qemu64, qemu32, and athlon. This will allow us to eliminate x86_cpudef_setup() later. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23osdep: Move default qemu_hw_version() value to a macroEduardo Habkost2-8/+10
The macro will be used by code that will stop calling qemu_hw_version() at runtime and just need a constant value. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: kvm: Use X86XSaveArea struct for xsave save/loadEduardo Habkost1-40/+38
Instead of using offset macros and bit operations in a uint32_t array, use the X86XSaveArea struct to perform the loading/saving operations in kvm_put_xsave() and kvm_get_xsave(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: Use xsave structs for ext_save_areaEduardo Habkost1-7/+14
This doesn't introduce any change in the code, as the offsets and struct sizes match what was present in the table. This can be validated by the QEMU_BUILD_BUG_ON lines on target-i386/cpu.h, which ensures the struct sizes and offsets match the existing values in ext_save_area. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23target-i386: Define structs for layout of xsave areaEduardo Habkost2-0/+118
Add structs that define the layout of the xsave areas used by Intel processors. Add some QEMU_BUILD_BUG_ON lines to ensure the structs match the XSAVE_* macros in target-i386/kvm.c and the offsets and sizes at target-i386/cpu.c:ext_save_areas. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.1 at 2024-11-03 11:15:34 +0000