aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-03default-configs: remove redundant keysPaolo Bonzini59-81/+8
TARGET_BASE_ARCH and TARGET_ABI_DIR are 99% of the time the same as TARGET_ARCH, remove them if so. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: use TARGET_ARCH keyPaolo Bonzini73-73/+76
Replace the individual TARGET_*=y lines with TARGET_ARCH, similar to how TARGET_BASE_ARCH is handled already. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: move OpenBSD W^X test to mesonPaolo Bonzini2-16/+7
The TCG option is now passed through to Meson. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: remove default-configs/devices for user-mode targetsPaolo Bonzini40-42/+3
We no longer need dummy files to detect targets, since default-configs/targets/ exists. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: remove target configurationPaolo Bonzini74-455/+412
The config-target.mak files are small constant, we can therefore just write them down explicitly. This removes a pretty large part of the configure script, including the whole logic to detect which accelerators are supported by each target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: remove useless config-target.mak symbolsPaolo Bonzini1-11/+14
Omit symbols that are not needed by softmmu or bsd-user targets, in preparation for moving the generated config-target.mak files into the source tree. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: compute derivatives of target name in mesonPaolo Bonzini2-13/+25
Several CONFIG_* symbols in config-target.mak are easily computed from just the target name. We do not need them in config-target.mak, and can instead place them in the config_target dictionary only. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: remove dead variablePaolo Bonzini1-11/+0
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: move accelerator logic to mesonPaolo Bonzini2-34/+94
Move to meson the code to detect the presence of accelerators, and to define accelerator-specific config-target.h symbols. The logic for now is duplicated in configure because it is still in use to build the list of targets (which is in turn used to create the config-target.mak files). The next patches remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: rewrite accelerator defaults as testsPaolo Bonzini1-20/+38
Prepare to process "auto" in meson rather than configure: standardize the shape of the code that changes "auto" to enabled/disabled, to ease the review when it will be moved to meson. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: convert accelerator variables to meson optionsPaolo Bonzini3-66/+83
Prepare for moving the tests to meson. For now they only have enabled/disabled as the possible values when meson is invoked, but "auto" will be a possibility later, when configure will only parse the command line options. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: move files to default-configs/devices/Paolo Bonzini75-4/+4
Make room for target files in default-configs/targets/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03travis: remove TCI testPaolo Bonzini1-8/+0
TCI is already covered on gitlab CI, so we can remove it. Cc: Thomas Huth <thuth@redhat.com> Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-02Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell30-545/+1428
Block layer patches: - Add block export infrastructure - iotests improvements - Document the throttle block filter - Misc code cleanups # gpg: Signature made Fri 02 Oct 2020 15:36:53 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (37 commits) qcow2: Use L1E_SIZE in qcow2_write_l1_entry() qemu-storage-daemon: Fix help line for --export iotests: Test block-export-* QMP interface iotests: Allow supported and unsupported formats at the same time iotests: Introduce qemu_nbd_list_log() iotests: Factor out qemu_tool_pipe_and_status() nbd: Deprecate nbd-server-add/remove nbd: Merge nbd_export_new() and nbd_export_create() block/export: Move writable to BlockExportOptions block/export: Add query-block-exports block/export: Create BlockBackend in blk_exp_add() block/export: Move blk to BlockExport block/export: Add BLOCK_EXPORT_DELETED event block/export: Add block-export-del block/export: Move strong user reference to block_exports block/export: Add 'id' option to block-export-add block/export: Add blk_exp_close_all(_type) block/export: Allocate BlockExport in blk_exp_add() block/export: Add node-name to BlockExportOptions block/export: Move AioContext from NBDExport to BlockExport ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-02qcow2: Use L1E_SIZE in qcow2_write_l1_entry()Alberto Garcia1-2/+2
We overlooked these in 02b1ecfa100e7ecc2306560cd27a4a2622bfeb04 Signed-off-by: Alberto Garcia <berto@igalia.com> Message-Id: <20200928162333.14998-1-berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qemu-storage-daemon: Fix help line for --exportKevin Wolf1-1/+1
Commit 5f479a8d renamed the 'device' option of --export into 'node-name', but forgot to update the help in qemu-storage-daemon. Fixes: 5f479a8dc086bfa42c9f94e9ab69962f256e207f Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200930133909.58820-1-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02iotests: Test block-export-* QMP interfaceKevin Wolf3-0/+257
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200924152717.287415-32-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02iotests: Allow supported and unsupported formats at the same timeKevin Wolf1-5/+1
This is useful for specifying 'generic' as supported (which includes only writable image formats), but still excluding some incompatible writable formats. It also removes more lines than it adds. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200924152717.287415-31-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02iotests: Introduce qemu_nbd_list_log()Kevin Wolf1-1/+12
Add a function to list the NBD exports offered by an NBD server. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200924152717.287415-30-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02iotests: Factor out qemu_tool_pipe_and_status()Kevin Wolf1-26/+23
We have three almost identical functions that call an external process and return its output and return code. Refactor them into small wrappers around a common function. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200924152717.287415-29-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Deprecate nbd-server-add/removeKevin Wolf2-2/+15
These QMP commands are replaced by block-export-add/del. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200924152717.287415-28-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Merge nbd_export_new() and nbd_export_create()Kevin Wolf3-56/+45
There is no real reason any more why nbd_export_new() and nbd_export_create() should be separate functions. The latter only performs a few checks before it calls the former. What makes the current state stand out is that it's the only function in BlockExportDriver that is not a static function inside nbd/server.c, but a small wrapper in blockdev-nbd.c that then calls back into nbd/server.c for the real functionality. Move all the checks to nbd/server.c and make the resulting function static to improve readability. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-27-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move writable to BlockExportOptionsKevin Wolf5-26/+32
The 'writable' option is a basic option that will probably be applicable to most if not all export types that we will implement. Move it from NBD to the generic BlockExport layer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-26-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add query-block-exportsKevin Wolf2-0/+55
This adds a simple QMP command to query the list of block exports. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-25-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Create BlockBackend in blk_exp_add()Kevin Wolf4-61/+63
Every export type will need a BlockBackend, so creating it centrally in blk_exp_add() instead of the .create driver callback avoids duplication. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-24-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move blk to BlockExportKevin Wolf3-21/+28
Every block export has a BlockBackend representing the disk that is exported. It should live in BlockExport therefore. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-23-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add BLOCK_EXPORT_DELETED eventKevin Wolf5-2/+27
Clients may want to know when an export has finally disappeard (block-export-del returns earlier than that in the general case), so add a QAPI event for it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200924152717.287415-22-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add block-export-delKevin Wolf7-43/+77
Implement a new QMP command block-export-del and make nbd-server-remove a wrapper around it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-21-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move strong user reference to block_exportsKevin Wolf4-7/+14
The reference owned by the user/monitor that is created when adding the export and dropped when removing it was tied to the 'exports' list in nbd/server.c. Every block export will have a user reference, so move it to the block export level and tie it to the 'block_exports' list in block/export/export.c instead. This is necessary for introducing a QMP command for removing exports. Note that exports are present in block_exports even after the user has requested shutdown. This is different from NBD's exports where exports are immediately removed on a shutdown request, even if they are still in the process of shutting down. In order to avoid that the user still interacts with an export that is shutting down (and possibly removes it a second time), we need to remember if the user actually still owns it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-20-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add 'id' option to block-export-addKevin Wolf7-3/+39
We'll need an id to identify block exports in monitor commands. This adds one. Note that this is different from the 'name' option in the NBD server, which is the externally visible export name. While block export ids need to be unique in the whole process, export names must be unique only for the same server. Different export types or (potentially in the future) multiple NBD servers can have the same export name externally, but still need different block export ids internally. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-19-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add blk_exp_close_all(_type)Kevin Wolf7-36/+107
This adds a function to shut down all block exports, and another one to shut down the block exports of a single type. The latter is used for now when stopping the NBD server. As soon as we implement support for multiple NBD servers, we'll need a per-server list of exports and it will be replaced by a function using that. As a side effect, the BlockExport layer has a list tracking all existing exports now. closed_exports loses its only user and can go away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-18-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Allocate BlockExport in blk_exp_add()Kevin Wolf5-36/+57
Instead of letting the driver allocate and return the BlockExport object, allocate it already in blk_exp_add() and pass it. This allows us to initialise the generic part before calling into the driver so that the driver can just use these values instead of having to parse the options a second time. For symmetry, move freeing the BlockExport to blk_exp_unref(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-17-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add node-name to BlockExportOptionsKevin Wolf4-21/+58
Every block export needs a block node to export, so add a 'node-name' option to BlockExportOptions and remove the replaced option 'device' from BlockExportOptionsNbd. To maintain compatibility in nbd-server-add, BlockExportOptionsNbd needs to be wrapped by a new type NbdServerAddOptions that adds 'device' back because nbd-server-add doesn't use the BlockExportOptions base type at all (so even without changing it to a 'node-name' option in block-export-add, this compatibility code would be necessary). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-16-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move AioContext from NBDExport to BlockExportKevin Wolf3-13/+18
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-15-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move refcount from NBDExport to BlockExportKevin Wolf5-42/+63
Having a refcount makes sense for all types of block exports. It is also a prerequisite for keeping a list of all exports at the BlockExport level. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-14-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd/server: Simplify export shutdownKevin Wolf1-13/+4
Closing export is somewhat convoluted because nbd_export_close() and nbd_export_put() call each other and the ways they actually end up being nested is not necessarily obvious. However, it is not really necessary to call nbd_export_close() from nbd_export_put() when putting the last reference because it only does three things: 1. Close all clients. We're going to refcount 0 and all clients hold a reference, so we know there is no active client any more. 2. Close the user reference (represented by exp->name being non-NULL). The same argument applies: If the export were still named, we would still have a reference. 3. Freeing exp->description. This is really cleanup work to be done when the export is finally freed. There is no reason to already clear it while clients are still in the process of shutting down. So after moving the cleanup of exp->description, the code can be simplified so that only nbd_export_close() calls nbd_export_put(), but never the other way around. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-13-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qemu-nbd: Use blk_exp_add() to create the exportKevin Wolf3-7/+30
With this change, NBD exports are now only created through the BlockExport interface. This allows us finally to move things from the NBD layer to the BlockExport layer if they make sense for other export types, too. blk_exp_add() returns only a weak reference, so the explicit nbd_export_put() goes away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-12-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Remove NBDExport.close callbackKevin Wolf4-21/+7
The export close callback is unused by the built-in NBD server. qemu-nbd uses it only during shutdown to wait for the unrefed export to actually go away. It can just use nbd_export_close_all() instead and do without the callback. This removes the close callback from nbd_export_new() and makes both callers of it more similar. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-11-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Add writethrough to block-export-addKevin Wolf2-2/+11
qemu-nbd allows use of writethrough cache modes, which mean that write requests made through NBD will cause a flush before they complete. Expose the same functionality in block-export-add. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-10-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Add max-connections to nbd-server-startKevin Wolf5-13/+39
This is a QMP equivalent of qemu-nbd's --shared option, limiting the maximum number of clients that can attach at the same time. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-9-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Remove magic from block-export-addKevin Wolf6-21/+67
nbd-server-add tries to be convenient and adds two questionable features that we don't want to share in block-export-add, even for NBD exports: 1. When requesting a writable export of a read-only device, the export is silently downgraded to read-only. This should be an error in the context of block-export-add. 2. When using a BlockBackend name, unplugging the device from the guest will automatically stop the NBD server, too. This may sometimes be what you want, but it could also be very surprising. Let's keep things explicit with block-export-add. If the user wants to stop the export, they should tell us so. Move these things into the nbd-server-add QMP command handler so that they apply only there. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-8-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qemu-nbd: Use raw block driver for --offsetKevin Wolf4-42/+31
Instead of implementing qemu-nbd --offset in the NBD code, just put a raw block node with the requested offset on top of the user image and rely on that doing the job. This does not only simplify the nbd_export_new() interface and bring it closer to the set of options that the nbd-server-add QMP command offers, but in fact it also eliminates a potential source for bugs in the NBD code which previously had to add the offset manually in all relevant places. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-7-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qemu-storage-daemon: Use qmp_block_export_add()Kevin Wolf1-12/+1
No reason to duplicate the functionality locally, we can now just reuse the QMP command block-export-add for --export. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-6-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add BlockExport infrastructure and block-export-addKevin Wolf9-10/+134
We want to have a common set of commands for all types of block exports. Currently, this is only NBD, but we're going to add more types. This patch adds the basic BlockExport and BlockExportDriver structs and a QMP command block-export-add that creates a new export based on the given BlockExportOptions. qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-5-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qapi: Rename BlockExport to BlockExportOptionsKevin Wolf4-14/+14
The name BlockExport will be used for the struct containing the runtime state of block exports, so change the name of export creation options. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-4-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qapi: Create block-export moduleKevin Wolf9-170/+183
Move all block export related types and commands from block-core to the new QAPI module block-export. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-3-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Remove unused nbd_export_get_blockdev()Kevin Wolf2-7/+0
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-2-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qemu-io-cmds: Simplify help_onelineDr. David Alan Gilbert1-9/+2
help_oneline is declared and starts as: static void help_oneline(const char *cmd, const cmdinfo_t *ct) { if (cmd) { printf("%s ", cmd); } else { printf("%s ", ct->name); if (ct->altname) { printf("(or %s) ", ct->altname); } } However, there are only two routes to help_oneline being called: help_f -> help_all -> help_oneline(ct->name, ct) help_f -> help_onecmd(argv[1], ct) In the first case, 'cmd' and 'ct->name' are the same thing, so it's impossible for the if (cmd) to be false and then validly print ct->name - this is upsetting gcc ( https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96739 ) In the second case, cmd is argv[1] and we know we've got argv[1] so again (cmd) is non-NULL. Simplify help_oneline by just printing cmd. (Also strengthen argc check just to be pedantic) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200824102914.105619-1-dgilbert@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02docs: Document the throttle block filterAlberto Garcia1-1/+107
This filter was added back in 2017 for QEMU 2.11 but it was never properly documented, so let's explain how it works and add a couple of examples. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-Id: <20200921173016.27935-1-berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02tests/check-block: Do not run the iotests with old versions of bashThomas Huth1-0/+5
macOS is shipped with a very old version of the bash (3.2), which is currently not suitable for running the iotests anymore (e.g. it is missing support for "readarray" which is used in the file tests/qemu-iotests/common.filter). Add a check to skip the iotests in this case - if someone still wants to run the iotests on macOS, they can install a newer version from homebrew, for example. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200918153514.330705-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2025-02-11 09:27:26 +0000