aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-08ipxe: drop ia32 efi romsGerd Hoffmann1-2/+0
UEFI on ia32 never really took off. Basically the BIOS -> UEFI shift came too late, x64 was widespread already, so vendors went from BIOS straight to UEFI on x64. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-08ipxe: update submoduleGerd Hoffmann1-0/+0
master snapshot, most recent commit from Aug 23th shortlog ======== Andrew Grasso (1): [intel] Add INTEL_NO_PHY_RST for I218LM Ben Bleything (1): [intel] Set INTEL_NO_PHY_RST on i218v Bobby Lockwood (1): [libgcc] Change __divmoddi4 from int64 [unknown] to int64_t Bruce Rogers (1): [build] Be explicit about -fcommon compiler directive Christian Nilsson (1): [intel] Add PCI ID for I219-V and -LM 6 to 9 Daniel Johnson (1): [deflate] Fix typo in comment describing length codes David Decotigny (2): [pcbios] Fix "out of memory" detection when expanding bottom area [pcbios] Take alignment into account when checking for available space Dentcho Ludmilov Bankov (1): [comboot] Fix stack pointer retrieval after COM32 binary returns Ignat Korchagin (3): [snp] Try promiscuous multicast receive filter if the regular one fails [snp] Set EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit as per UEFI spec [efi] Check the status code from AllocatePool() Joe Groocock (1): [cmdline] Add "--timeout" parameter to "ifconf" command Joseph Wong (1): [bnxt] Add driver support for Broadcom NetXtreme-E Adapters LaDerrick H (1): [sfc] Add PCI ID for Solarflare SFC9120 and Solarflare SFC9140 Michael Brown (105): [init] Show startup and shutdown function names in debug messages [efi] Blacklist the Dell Ip4ConfigDxe driver [tls] Support stateful session resumption [tls] Fix incorrectly duplicated error number [tls] Support stateless session resumption [crypto] Use x509_name() in validator debug messages [tls] Display cross-certificate and OCSP status messages [tls] Display validator messages only while validation is in progress [tcp] Display "connecting" status until connection is established [ocsp] Accept response certID with missing hashAlgorithm parameters [pci] Add support for PCI MSI-X interrupts [vlan] Provide vlan_netdev_rx() and vlan_netdev_rx_err() [intelxl] Use VLAN tag in receive descriptor if present [intelxl] Allow for virtual function admin queue register maps [intelxl] Use one admin queue buffer per admin queue descriptor [intelxl] Allow admin queues to be reinitialised [intelxl] Allow admin cookie to hold extended opcode and return code [intelxl] Provide a mechanism for handling "send to VF" events [intelxl] Use 32-byte receive descriptors [intelxl] Allow for arbitrary placement of ring tail registers [intelxl] Split out ring creation from context programming [intelxl] Allow for arbitrary placement of interrupt control register [intelxl] Expose functions required by virtual function driver [intelxl] Choose to operate in non-PXE mode [intelxl] Add driver for Intel 40 Gigabit Ethernet NIC virtual functions [build] Fix use of inline assembly on GCC 8 ARM64 builds [arm] Provide dummy implementations for {in,out}[s]{b,w,l} [efi] Return only registered EFI devices from efidev_parent() [fdt] Add ability to parse a MAC address from a flattened device tree [efi] Register a device tree if provided by the platform firmware [smsc95xx] Fetch MAC from device tree for Raspberry Pi [build] Add named configuration for Raspberry Pi [smscusb] Fetch MAC from device tree for Raspberry Pi Model B+ [build] Do not apply WORKAROUND_CFLAGS for host compiler [build] Move predefined all-drivers build shortcut to Makefile [build] Add predefined shortcut for Raspberry Pi builds [process] Add PROC_INIT() for initialising static processes [peerdist] Start block download timers from within opener methods [peerdist] Limit number of concurrent raw block downloads [tls] Add missing call to tls_tx_resume() when restarting negotiation [crypto] Drag in configured digestInfo prefixes for any use of RSA [crypto] Profile the various stages of modular multiplication [coverity] Override assumptions about wcrtomb() and hmac_init() [ethernet] Avoid false positive Coverity warning [golan] Fix address-of-pointer bug for multicast attach/detach [efi] Report failed control transfers as expected by the USB core [efi] Do not attempt EFI_USB_IO_PROTOCOL transfers during shutdown [lan78xx] Always enable automatic speed and duplex detection [peerdist] Allow PeerDist to be globally enabled or disabled [peerdist] Allow for the use of a hosted cache server [build] Construct full version number automatically from git revision [travis] Ensure that most recent tag is always available [tftp] Eliminate unnecessary variable-length stack allocation [infiniband] Eliminate variable-length stack allocation [slam] Eliminate variable-length stack allocation [slam] Allow for the possibility of IPv6 multicast addresses [settings] Eliminate variable-length stack allocation [iscsi] Eliminate variable-length stack allocations in CHAP handlers [iscsi] Eliminate variable-length stack allocation in URI parsing [bios] Define macros for constructing partition table entries [int13con] Create log partition only when CONSOLE_INT13 is enabled [efi] Disambiguate errors returned by ConnectController [png] Fix potential integer overflow [efi] Work around UEFI specification bug in LoadImage [efi] Work around UEFI specification bug in LoadImage for SAN boot [uri] Avoid appearing to access final byte of a potentially empty string [efi] Attempt to connect our driver directly if ConnectController fails [tls] Allow a minimum TLS protocol version to be specified [tls] Default to supporting only TLSv1.1 or above [crypto] Allow algorithms to be included without being OID-identifiable [crypto] Ensure that test code drags in required ASN.1 object identifiers [crypto] Disable MD5 as an OID-identifiable algorithm by default [snp] Retry initialisation if link is reported as down [util] Treat empty integer strings as invalid [parseopt] Treat empty integer strings in user input as invalid [efi] Enable stack protection where possible [ocsp] Accept SHA1 certID responses even if SHA1 is not enabled [intel] Avoid spurious compiler warning on GCC 10 [golan] Add explicit type casts for nodnic_queue_pair_type [build] Disable position-independent code for ARM64 EFI builds [efi] Detect and disable seriously broken EFI_RNG_PROTOCOL implementations [efi] Raise TPL during driver entry point [axge] Handle non-gigabit link speeds [usb] Clear device endpoint halt before resetting host endpoint [usb] Add missing usb_recycle() for completed hub interrupt transfers [usb] Do not attempt to disable USB3 hub ports [xhci] Set link state to RxDetect after disabling USB3 root hub port [usb] Avoid unnecessary calls to usb_hub_set_drvdata() [xhci] Increase link state settling delay to 100ms [axge] Reapply USB device configuration when opening network device [usb] Leave port enabled after a failed device registration [crypto] Avoid temporarily setting direction flag in bigint_is_geq() [libc] Provide an unoptimised generic_memcpy_reverse() [efi] Avoid setting direction flag on EFI platforms [libc] Add bit-rotation functions for unsigned long values [efi] Distribute available entropy within stack cookie [efi] Ensure NUL byte is at lowest address within stack cookie [efi] Claim SNP devices early in efi_download_start() [xfer] Remove address family from definition of a socket opener [dns] Use all configured DNS servers [wpa] Fix erroneous debug message in wpa_derive_ptk [efi] Match EDK2 numbering for USB ports [efi] Use device path to locate filesystem from which we were loaded [efi] Attempt NII initialisation both with and without cable detection [build] Fix building on older versions of gcc Michael J. Bazzinotti (1): [libc] Fix memcmp() to return proper values Mohammed (1): [golan] Add various new PCI device IDs Rob Taglang (1): [intelx] Added PCI_ROM entry for Intel x553/x557-AT and x553 (SFP+) NICs Tobias Kortkamp (1): [build] Fix a GNUism that FreeBSD's sed(1) cannot deal with Valentine Barshak (2): [build] Fix "'%s' directive argument is null" error [build] Workaround compilation error with gcc 9.1 bit (1): [build] Fix default target in sdsk image Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-07Merge remote-tracking branch ↵Peter Maydell26-44/+285
'remotes/huth-gitlab/tags/pull-request-2020-09-07' into staging * Fixes for cross-compiling with MinGW / compiling with MSYS2 * Enable cross-compiler builds in the Gitlab CI * Improvements / fixes for the crypto tests in the Gitlab CI * Fix for the "make check-acceptance" microblaze failure (required to get the Gitlab CI green again) # gpg: Signature made Mon 07 Sep 2020 13:03:31 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-09-07: target/microblaze: Collected fixes for env->iflags tests/qtest: do not list ahci-test twice gitlab: expand test coverage for crypto builds crypto: fix build with gcrypt enabled gitlab-ci: Add cross-compiling build tests stubs: Move qemu_fd_register stub to util/main-loop.c stubs: Move qemu_timer_notify_cb() and remove qemu_notify_event() stub configure: Allow automatic WHPX detection dockerfiles/debian-win64-cross: Download WHPX MinGW headers tests/Makefile: test-image-locking needs CONFIG_POSIX tests: Fixes building test-util-filemonitor.c on msys2/mingw tests: fixes test-vmstate.c compile error on msys2 tests: handling signal on win32 properly tests/docker: add python3-setuptools the docker images Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-07Merge remote-tracking branch ↵Peter Maydell4-217/+264
'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging Add ppoll_time64() and pselect6_time64() Some fixes for for elfload, fcntl, termbits and btrfs # gpg: Signature made Mon 07 Sep 2020 10:17:24 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-5.2-pull-request: linux-user: Protect btrfs ioctl target definitions linux-user: fix ppc/termbits.h linux-user: Map signal numbers in fcntl linux-user: Correctly start brk after executable linux-user: Add support for ppoll_time64() and pselect6_time64() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-07Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200904-pull-request' ↵Peter Maydell2-4/+13
into staging vga: fixes for cirrus and virtio-gpu. # gpg: Signature made Fri 04 Sep 2020 12:26:36 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20200904-pull-request: cirrus: handle wraparound in cirrus_invalidate_region virtio-gpu: fix unmap the already mapped items Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-07target/microblaze: Collected fixes for env->iflagsRichard Henderson4-9/+26
There are several problems here that can result in soft lockup, depending on exactly where an interrupt or exception is delivered: Include BIMM_FLAG in IFLAGS_TB_MASK, since it needs to follow D_FLAG. Ensure that iflags is 0 when entering an interrupt/exception handler. Add mb_cpu_synchronize_from_tb to restore iflags from tb->flags. The change to t_sync_flags is cosmetic, but makes the code clearer. This fixes the reported regression in acceptance/replay_kernel.py. Fixes: 683a247ed7a4 ("target/microblaze: Store "current" iflags in insn_start") Tested-by: Thomas Huth <thuth@redhat.com> Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200904190842.2282109-2-richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07tests/qtest: do not list ahci-test twicePaolo Bonzini1-1/+0
This is caught by "meson test", which complains about two tests with the same name. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200904120342.11370-1-pbonzini@redhat.com> Fixes: a2ce7dbd917 ("meson: convert tests/qtest to meson") Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07gitlab: expand test coverage for crypto buildsDaniel P. Berrangé3-0/+71
Most jobs test the latest nettle library. This adds explicit coverage for latest gcrypt using Fedora, and old gcrypt and nettle using CentOS-7. The latter does a minimal tools-only build, as we only need to validate that the crypto code builds and unit tests pass. Finally a job disabling both nettle and gcrypt is provided to validate that gnutls still works. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200901133050.381844-3-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07crypto: fix build with gcrypt enabledDaniel P. Berrangé3-11/+38
If nettle is disabled and gcrypt enabled, the compiler and linker flags needed for gcrypt are not passed. Gnutls was also not added as a dependancy when gcrypt is enabled. Attempting to add the library dependencies at the same time as the source dependencies is error prone, as there are alot of different rules for picking which sources to use, and some of the source files use code level conditionals intead. It is thus clearer to add the library dependencies separately. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200901133050.381844-2-berrange@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07gitlab-ci: Add cross-compiling build testsThomas Huth3-0/+115
Now that we can use all our QEMU test containers in the gitlab-CI, we can easily add some jobs that test cross-compilation for various architectures. There is just only small ugliness: Since the shared runners on gitlab.com are single-threaded, we have to split each compilation job into two parts (--disable-user and --disable-system), and exclude some additional targets, to avoid that the jobs are running too long and hitting the timeout of 1 h. Message-Id: <20200823111757.72002-8-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07stubs: Move qemu_fd_register stub to util/main-loop.cThomas Huth3-7/+4
The linker of MinGW sometimes runs into the following problem: libqemuutil.a(util_main-loop.c.obj): In function `qemu_fd_register': /builds/huth/qemu/build/../util/main-loop.c:331: multiple definition of `qemu_fd_register' libqemuutil.a(stubs_fd-register.c.obj):/builds/huth/qemu/stubs/fd-register.c:5: first defined here collect2: error: ld returned 1 exit status /builds/huth/qemu/rules.mak:88: recipe for target 'tests/test-timed-average.exe' failed qemu_fd_register() is defined in util/main-loop.c for WIN32, so let's simply move the stub also there in the #else part of the corresponding #ifndef to fix this problem. Message-Id: <20200903054503.425435-1-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07stubs: Move qemu_timer_notify_cb() and remove qemu_notify_event() stubThomas Huth4-12/+9
When cross-compiling with MinGW, there are sometimes some weird linker errors like: ibqemuutil.a(util_main-loop.c.obj): In function `qemu_notify_event': /builds/huth/qemu/build/../util/main-loop.c:139: multiple definition of `qemu_notify_event' libqemuutil.a(stubs_notify-event.c.obj):/builds/huth/qemu/stubs/notify-event.c:5: first defined here collect2: error: ld returned 1 exit status /builds/huth/qemu/rules.mak:88: recipe for target 'tests/test-timed-average.exe' failed It seems like it works better when the qemu_timer_notify_cb() stub (which calls qemu_notify_event()) is in a separate file - then we can also even remove the qemu_notify_event() stub now. This patch is based on ideas from the patch "stubs: Remove qemu_notify_event()" by Philippe Mathieu-Daudé and the patch "cpu-timers, icount: new modules" from Claudio Fontana. Message-Id: <20200902102433.304737-1-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07configure: Allow automatic WHPX detectionThomas Huth1-0/+1
The whpx variable is currently initialized to "no" which causes the WHPX check to skip the detection unless the user specified --enable-whpx. Since the detection code should be able to figure it out correctly, let's initialized the variable to "" on MinGW-builds for proper auto-detection instead. Message-Id: <20200804170055.2851-11-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20200823111757.72002-7-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07dockerfiles/debian-win64-cross: Download WHPX MinGW headersThomas Huth1-1/+8
To compile-test the WHPX accelerator, we need to download these system headers first (they are unfortunately not part of any released and packaged MinGW toolchain yet). Idea taken from another patch by Stefan Weil. Message-Id: <20200804170055.2851-12-thuth@redhat.com> Message-Id: <20200823111757.72002-6-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07tests/Makefile: test-image-locking needs CONFIG_POSIXThomas Huth1-0/+2
test-image-locking.c uses the qemu_lock_fd_test() function which is only available on POSIX-like systems. Message-Id: <20200804170055.2851-4-thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-Id: <20200823111757.72002-4-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07tests: Fixes building test-util-filemonitor.c on msys2/mingwYonggang Luo1-1/+3
Fixes the following compiling error: ../tests/test-util-filemonitor.c: In function 'test_file_monitor_events': ../tests/test-util-filemonitor.c:620:17: error: too many arguments to function 'mkdir' 620 | if (mkdir(pathsrc, 0700) < 0) { | ^~~~~ In file included from C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/unistd.h:10, from C:/work/xemu/qemu/include/qemu/osdep.h:93, from ../tests/test-util-filemonitor.c:21: C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/io.h:282:15: note: declared here 282 | int __cdecl mkdir (const char *) __MINGW_ATTRIB_DEPRECATED_MSVC2005; | ^~~~~ Signed-off-by: Yonggang Luo <luoyonggang@gmail.com> Message-Id: <20200905203425.1470-1-luoyonggang@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07tests: fixes test-vmstate.c compile error on msys2Yonggang Luo1-2/+2
../tests/test-vmstate.c: In function 'int_cmp': ../tests/test-vmstate.c:884:5: error: unknown type name 'uint'; did you mean 'uInt'? 884 | uint ua = GPOINTER_TO_UINT(a); | ^~~~ | uInt ../tests/test-vmstate.c:885:5: error: unknown type name 'uint'; did you mean 'uInt'? 885 | uint ub = GPOINTER_TO_UINT(b); | ^~~~ | uInt make: *** [Makefile.ninja:5461：tests/test-vmstate.exe.p/test-vmstate.c.obj] 错误 1 Signed-off-by: Yonggang Luo <luoyonggang@gmail.com> Message-Id: <20200905063813.1875-1-luoyonggang@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-06tests: handling signal on win32 properlyYonggang Luo1-0/+4
SIGABRT should use signal(SIGABRT, sigabrt_handler) to handle on win32 The error: E:/CI-Cor-Ready/xemu/qemu.org/tests/test-replication.c:559:33: error: invalid use of undefined type 'struct sigaction' 559 | sigact = (struct sigaction) { | ^ Signed-off-by: Yonggang Luo <luoyonggang@gmail.com> Message-Id: <20200902170054.810-6-luoyonggang@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-06tests/docker: add python3-setuptools the docker imagesAlex Bennée2-0/+2
We need these now for builds to work. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200903112107.27367-4-alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-06Merge remote-tracking branch 'remotes/kraxel/tags/ui-20200904-pull-request' ↵Peter Maydell4-26/+40
into staging ui: memleak fixes. gtk: refresh interval fix. spice: add mouse buttons. # gpg: Signature made Fri 04 Sep 2020 08:00:55 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20200904-pull-request: ui/gtk: Update refresh interval after widget is realized ui: Add more mouse buttons to SPICE vnc-auth-sasl: Plug memleak in vnc_socket_ip_addr_string ui/gtk-gl-area: Plug memleak in gd_gl_area_create_context() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-06linux-user: Protect btrfs ioctl target definitionsFilip Bozuta1-0/+2
Target definitions of btrfs ioctls in 'syscall_defs.h' use the value BTRFS_IOCTL_MAGIC that is defined header 'btrfs.h'. This header is not available in kernel versions before 3.9. For that reason, these target ioctl definitions should be enwrapped in an #ifdef directive to check whether the 'btrfs.h' header is available as to not cause build errors on older Linux systems. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200905163802.2666-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-06linux-user: fix ppc/termbits.hLaurent Vivier1-1/+1
On ppc, in termios, c_line is after c_cc, not before . Fixes: c218b4ede4f9 ("linux-user: Add missing termbits types and values definitions") Cc: Filip.Bozuta@syrmia.com Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200830181620.422036-1-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-06linux-user: Map signal numbers in fcntlTimothy Baldwin1-2/+8
Map signal numbers in fcntl F_SETSIG and F_GETSIG. Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <72cc725c-f344-b7f1-d559-401867067d80@members.leeds.ac.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-05linux-user: Correctly start brk after executableTimothy E Baldwin1-4/+3
info->brk was erroneously set to the end of highest addressed writable segment which could result it in overlapping the executable. As per load_elf_binary in fs/binfmt_elf.c in Linux, it should be set to end of highest addressed segment. Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200728224615.326675-1-T.E.Baldwin99@members.leeds.ac.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-05linux-user: Add support for ppoll_time64() and pselect6_time64()Filip Bozuta1-210/+250
This patch introduces functionality for following time64 syscalls: *ppoll_time64 This is a year 2038 safe variant of: int poll(struct pollfd *fds, nfds_t nfds, int timeout) -- wait for some event on a file descriptor -- man page: https://man7.org/linux/man-pages/man2/ppoll.2.html *pselect6_time64 This is a year 2038 safe variant of: int pselect6(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, const struct timespec *timeout, const sigset_t *sigmask); -- synchronous I/O multiplexing -- man page: https://man7.org/linux/man-pages/man2/pselect6.2.html Implementation notes: Year 2038 safe syscalls in this patch were implemented with the same code as their regular variants (ppoll() and pselect()). This code was moved to new functions ('do_ppoll()' and 'do_pselect6()') that take a 'bool time64' from which a right 'struct timespec' converting function is called. (target_to_host/host_to_target_timespec() for regular and target_to_host/host_to_target_timespec64() for time64 variants) Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200824223050.92032-2-Filip.Bozuta@syrmia.com> [lv: rebase and fix do_pselect6()] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-05Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200903' into stagingPeter Maydell3-67/+143
Improve inlining in cputlb.c. Fix vector abs fallback. Only set parallel_cpus for SMP. Add vector dupm for 256-bit elements. # gpg: Signature made Thu 03 Sep 2020 22:38:25 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20200903: tcg: Implement 256-bit dup for tcg_gen_gvec_dup_mem tcg: Eliminate one store for in-place 128-bit dup_mem softmmu/cpus: Only set parallel_cpus for SMP tcg: Fix tcg gen for vectorized absolute value cputlb: Make store_helper less fragile to compiler optimizations Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-04Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-09-03' into ↵Peter Maydell9-76/+108
staging QAPI patches patches for 2020-09-03 # gpg: Signature made Thu 03 Sep 2020 09:00:37 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2020-09-03: docs/qdev-device-use: Don't suggest -drive and -net can do USB qapi: Document event VSERPORT_CHANGE is rate-limited docs/interop/qmp-spec: Point to the QEMU QMP reference manual scripts/qmp/qom-fuse: Fix getattr(), read() for files in / scripts/qmp/qom-fuse: Port to current Python module fuse scripts/qmp/qom-fuse: Unbreak import of QEMUMonitorProtocol qapi/block-core.json: Remove stale description of 'blockdev-add' qapi: enable use of g_autoptr with QAPI types Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-04Merge remote-tracking branch ↵Peter Maydell6-1/+337
'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging Add btrfs support Fix MK_ARRAY() # gpg: Signature made Thu 03 Sep 2020 00:26:37 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-5.2-pull-request: linux-user: Add support for btrfs ioctls used to scrub a filesystem linux-user: Add support for btrfs ioctls used to manage quota linux-user: Add support for two btrfs ioctls used for subvolume linux-user: Add support for a group of btrfs inode ioctls linux-user: Add support for btrfs ioctls used to get/set features linux-user: Add support for btrfs ioctls used to manipulate with devices linux-user: Add support for a group of btrfs ioctls used for snapshots linux-user: Add support for a group of btrfs ioctls used for subvolumes linux-user: fix implicit conversion from enumeration type error Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-04cirrus: handle wraparound in cirrus_invalidate_regionGerd Hoffmann1-3/+9
Code simply asserts that there is no wraparound instead of handling it properly. The assert() can be triggered by the guest (must be privilidged inside the guest though). Fix it. Buglink: https://bugs.launchpad.net/qemu/+bug/1880189 Cc: Li Qiang <liq3ea@163.com> Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@163.com> Message-id: 20200901140944.24101-1-kraxel@redhat.com
2020-09-04virtio-gpu: fix unmap the already mapped itemsLi Zhijian1-1/+4
we go here either (!(*iov)[i].iov_base) or (len != l), so we need to consider to unmap the 'i'th item as well when the 'i'th item is not nil CC: Li Qiang <liq3ea@gmail.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Message-id: 20200827035855.24354-1-lizhijian@cn.fujitsu.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-04ui/gtk: Update refresh interval after widget is realizedPhilippe Mathieu-Daudé1-26/+26
Nikola reported on Windows when gd_vc_gfx_init() is called, the window is not yet realized, so we run gd_refresh_rate_millihz(NULL) which returns 0 milli-Hertz. When a Widget is realized, it fires a 'realized' event. We already have the gd_draw_event() handler registered for this even, so simply move the gd_refresh_rate_millihz() there. When the event fires, the window is known to exist. This completes commit c4c00922cc original intention. Reported-by: Nikola Pavlica <pavlica.nikola@gmail.com> Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200817172331.598255-1-philmd@redhat.com Suggested-by: Nikola Pavlica <pavlica.nikola@gmail.com> Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-04ui: Add more mouse buttons to SPICEFrediano Ziglio1-0/+2
Add support for SIDE and EXTRA buttons. The constants for buttons in both SPICE and QEMU are defined as LEFT MIDDLE RIGHT UP DOWN SIDE EXTRA (same order). "button_mask" contains for each bit the state of a button. Qemu currently uses bits 0, 1, 2 respectively as LEFT, RIGHT, MIDDLE; also add bits 4 and 5 as UP and DOWN (using wheel movements). SPICE protocol uses a bitmask based on the order above where LEFT is bit 0, MIDDLE is bit 1 and so on till EXTRA being bit 6. To avoid clash with Qemu usage SPICE bitmask from SIDE are move a bit more resulting respectively in 0x40 and 0x80 values. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Message-id: 20200820145851.50846-1-fziglio@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-04vnc-auth-sasl: Plug memleak in vnc_socket_ip_addr_stringPan Nengyuan1-0/+1
'addr' is forgot to free in vnc_socket_ip_addr_string error path. Fix that. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200831134315.1221-11-pannengyuan@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-04ui/gtk-gl-area: Plug memleak in gd_gl_area_create_context()Pan Nengyuan1-0/+11
Receiving error in local variable err, and forgot to free it. This patch check the return value of 'gdk_window_create_gl_context' and 'gdk_gl_context_realize', then free err to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200831134315.1221-6-pannengyuan@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-03Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-09-02' into ↵Peter Maydell7-9/+283
staging nbd patches for 2020-09-02 - fix a few iotests affected by earlier nbd changes - avoid blocking qemu by nbd client in connect() - build qemu-nbd for mingw # gpg: Signature made Wed 02 Sep 2020 22:52:31 BST # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2020-09-02: nbd: disable signals and forking on Windows builds nbd: skip SIGTERM handler if NBD device support is not built block: add missing socket_init() calls to tools block/nbd: use non-blocking connect: fix vm hang on connect() iotests/259: Fix reference output iotests/059: Fix reference output Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-03tcg: Implement 256-bit dup for tcg_gen_gvec_dup_memRichard Henderson1-3/+49
We already support duplication of 128-bit blocks. This extends that support to 256-bit blocks. This will be needed by SVE2. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-03tcg: Eliminate one store for in-place 128-bit dup_memRichard Henderson1-2/+2
Do not store back to the exact memory from which we just loaded. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-03softmmu/cpus: Only set parallel_cpus for SMPRichard Henderson1-1/+10
Do not set parallel_cpus if there is only one cpu instantiated. This will allow tcg to use serial code to implement atomics. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-03tcg: Fix tcg gen for vectorized absolute valueStephen Long1-2/+3
The fallback inline expansion for vectorized absolute value, when the host doesn't support such an insn was flawed. E.g. when a vector of bytes has all elements negative, mask will be 0xffff_ffff_ffff_ffff. Subtracting mask only adds 1 to the low element instead of all elements becase -mask is 1 and not 0x0101_0101_0101_0101. Signed-off-by: Stephen Long <steplong@quicinc.com> Message-Id: <20200813161818.190-1-steplong@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-03cputlb: Make store_helper less fragile to compiler optimizationsRichard Henderson1-59/+79
This has no functional change. The current function structure is: inline QEMU_ALWAYSINLINE store_memop() { switch () { ... default: qemu_build_not_reached(); } } inline QEMU_ALWAYSINLINE store_helper() { ... if (span_two_pages_or_io) { ... helper_ret_stb_mmu(); } store_memop(); } helper_ret_stb_mmu() { store_helper(); } Whereas GCC will generate an error at compile-time when an always_inline function is not inlined, Clang does not. Nor does Clang prioritize the inlining of always_inline functions. Both of these are arguably bugs. Both `store_memop` and `store_helper` need to be inlined and allow constant propogations to eliminate the `qemu_build_not_reached` call. However, if the compiler instead chooses to inline helper_ret_stb_mmu into store_helper, then store_helper is now self-recursive and the compiler is no longer able to propagate the constant in the same way. This does not produce at current QEMU head, but was reproducible at v4.2.0 with `clang-10 -O2 -fexperimental-new-pass-manager`. The inline recursion problem can be fixed solely by marking helper_ret_stb_mmu as noinline, so the compiler does not make an incorrect decision about which functions to inline. In addition, extract store_helper_unaligned as a noinline subroutine that can be shared by all of the helpers. This saves about 6k code size in an optimized x86_64 build. Reported-by: Shu-Chun Weng <scw@google.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-03Merge remote-tracking branch ↵Peter Maydell18-89/+183
'remotes/huth-gitlab/tags/pull-request-2020-09-03' into staging * Cirrus-CI improvements and fixes (compile with -Werror & fix for 1h problem) * Two build system fixes to fix some failures the CI * One m68k QOMification patch * Some trivial qtest patches * Some small improvements for the Gitlab CI # gpg: Signature made Thu 03 Sep 2020 12:04:32 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-09-03: gitlab-ci.yml: Set artifacts expiration time gitlab-ci.yml: Run check-qtest and check-unit at the end of the fuzzer job gitlab/travis: Rework the disabled features tests libqtest: Rename qmp_assert_error_class() to qmp_expect_error_and_unref() tests/qtest/ipmi-kcs: Fix assert side-effect tests/qtest/tpm: Declare input buffers const and static tests/qtest/ahci: Improve error handling (NEGATIVE_RETURNS) hw/m68k: QOMify the mcf5206 system integration module configure: Add system = 'linux' for meson when cross-compiling meson: fix keymaps without qemu-keymap cirrus.yml: Split FreeBSD job into two parts cirrus.yml: Update the macOS jobs to Catalina cirrus.yml: Compile macOS with -Werror cirrus.yml: Compile FreeBSD with -Werror configure: Fix atomic64 test for --enable-werror on macOS Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-03Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200901' ↵Peter Maydell9-95/+208
into staging Various fixes of Aspeed machines : * New Supermicro X11 BMC machine (Erik) * Fixed valid access size on AST2400 SCU * Improved robustness of the ftgmac100 model. * New flash models in m25p80 (Igor) * Fixed reset sequence of SDHCI/eMMC controllers * Improved support of the AST2600 SDMC (Joel) * Couple of SMC cleanups # gpg: Signature made Tue 01 Sep 2020 13:39:20 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20200901: hw: add a number of SPI-flash's of m25p80 family arm: aspeed: add strap define `25HZ` of AST2500 aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller aspeed/sdmc: Simplify calculation of RAM bits aspeed/sdmc: Allow writes to unprotected registers aspeed/sdmc: Perform memory training ftgmac100: Improve software reset ftgmac100: Fix integer overflow in ftgmac100_do_tx() ftgmac100: Check for invalid len and address before doing a DMA transfer ftgmac100: Change interrupt status when a DMA error occurs ftgmac100: Fix interrupt status "Packet moved to RX FIFO" ftgmac100: Fix interrupt status "Packet transmitted on ethernet" ftgmac100: Fix registers that can be read aspeed/sdhci: Fix reset sequence aspeed/smc: Fix max_slaves of the legacy SMC device aspeed/smc: Fix MemoryRegionOps definition hw/arm/aspeed: Add board model for Supermicro X11 BMC aspeed/scu: Fix valid access size on AST2400 m25p80: Add support for n25q512ax3 m25p80: Return the JEDEC ID twice for mx25l25635e Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-03gitlab-ci.yml: Set artifacts expiration timeThomas Huth1-0/+4
The default expiration time for artifacts seems to be very high (30 days?). Since we only need the artifacts to pass the binaries from one stage to the next one, we can decrease the expiration time to avoid to spam the file server too much. Two days should be enough in case someone still wants to have a look after the pipeline finished. Message-Id: <20200806161546.15325-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03gitlab-ci.yml: Run check-qtest and check-unit at the end of the fuzzer jobThomas Huth1-2/+4
The fuzzer job finishes quite early, so we can run the unit tests and qtests with -fsanitize=address here without extending the total test time. Message-Id: <20200831153228.229185-1-thuth@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03gitlab/travis: Rework the disabled features testsThomas Huth2-13/+19
Let's focus on the gitlab-ci when testing the compilation with disabled features, thus add more switches there (and while we're at it, sort them also alphabetically). This should cover the test from the Travis CI now, too, so that we can remove the now-redundant job from the Travis CI. Message-Id: <20200806155306.13717-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03libqtest: Rename qmp_assert_error_class() to qmp_expect_error_and_unref()Markus Armbruster6-29/+29
qmp_assert_error_class() does more than just assert: it also unrefs the @rsp argument. Rename to qmp_expect_error_and_unref() to reduce confusion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200902115733.1229537-1-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03tests/qtest/ipmi-kcs: Fix assert side-effectPhilippe Mathieu-Daudé1-1/+2
Fix assert side-effect reported by Coverity: /qemu/tests/qtest/ipmi-kcs-test.c: 84 in kcs_wait_obf() 83 while (IPMI_KCS_CMDREG_GET_OBF() == 0) { >>> CID 1432368: Incorrect expression (ASSERT_SIDE_EFFECT) >>> Argument "--count" of g_assert() has a side effect. The containing function might work differently in a non-debug build. 84 g_assert(--count != 0); Reported-by: Coverity (CID 1432368) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902080801.160652-2-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03tests/qtest/tpm: Declare input buffers const and staticPhilippe Mathieu-Daudé2-7/+7
The functions using these arrays expect a "const unsigned char *" argument, it is safe to declare these as 'static const'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902080909.161034-1-philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03tests/qtest/ahci: Improve error handling (NEGATIVE_RETURNS)Philippe Mathieu-Daudé1-0/+1
Fix an error handling issue reported by Coverity: /qemu/tests/qtest/ahci-test.c: 1452 in prepare_iso() 1444 int fd = mkstemp(cdrom_path); >>> CID 1432375: Error handling issues (NEGATIVE_RETURNS) >>> "fd" is passed to a parameter that cannot be negative. 1452 ret = write(fd, patt, size); Reported-by: Coverity (CID 1432375) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902080552.159806-1-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03hw/m68k: QOMify the mcf5206 system integration moduleThomas Huth3-13/+48
The mcf5206 system integration module should be a proper device. Let's finally QOMify it. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200819065201.4045-1-huth@tuxfamily.org>
generated by cgit v1.1 at 2025-02-07 00:39:06 +0000