aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-02-08target/tricore: Fix OPC2_32_RRRR_DEXTRBastian Koppelmann1-3/+12
if cpu_gpr_d[r3] == 0 then we were shifting the lower register to the right by 32 which is undefined behaviour. In this case the TriCore would do nothing an just return the higher register cpu_reg_d[r1]. We fixed that by detecting whether cpu_gpr_d[r3] was zero and cleared the lower register. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230202120432.1268-8-kbastian@mail.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2023-02-08tests/tcg/tricore: Add tests for RRPW_DEXTRBastian Koppelmann3-0/+49
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230202120432.1268-7-kbastian@mail.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2023-02-08target/tricore: Fix RRPW_DEXTRBastian Koppelmann1-9/+3
if we used const16 == 0 we would crash qemu with the error: ../tcg/tcg-op.c:196: tcg_gen_shri_i32: Assertion `arg2 >= 0 && arg2 < 32' failed This whole instruction can be handled by 'tcg_gen_extract2_tl' which takes care of this special case as well. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230202120432.1268-6-kbastian@mail.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2023-02-08tests/tcg/tricore: Add test for OPC2_32_RCRW_INSERTBastian Koppelmann3-4/+22
DREG_RS2 and DREG_CALC_RESULT were mapped to the same register which would not trigger https://gitlab.com/qemu-project/qemu/-/issues/653. So let's make each register unique. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230202120432.1268-5-kbastian@mail.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2023-02-08target/tricore: Fix OPC2_32_RCRW_INSERT translationBastian Koppelmann1-2/+2
we were mixing up the "c" and "d" registers. We used "d" as a destination register und "c" as the source. According to the TriCore ISA manual 1.6 vol 2 it is the other way round. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653 Message-Id: <20230202120432.1268-4-kbastian@mail.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2023-02-08tests/tcg/tricore: Add test for OPC2_32_RCRW_IMASKBastian Koppelmann3-0/+18
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230202120432.1268-3-kbastian@mail.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2023-02-08target/tricore: Fix OPC2_32_RCRW_IMASK translationBastian Koppelmann1-3/+3
we were mixing up the "c" and "d" registers. We used "d" as a destination register und "c" as the source. According to the TriCore ISA manual 1.6 vol 2 it is the other way round. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653 Message-Id: <20230202120432.1268-2-kbastian@mail.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2023-02-07Merge tag 'pull-aspeed-20230207' of https://github.com/legoater/qemu into ↵Peter Maydell23-129/+523
staging aspeed queue: * various small cleanups and fixes * new variant of the supermicrox11-bmc machine using an ast2500-a1 SoC * at24c_eeprom extension to define eeprom contents with static arrays * ast10x0 model and test improvements * avocado update of images to use the latest # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmPiByEACgkQUaNDx8/7 # 7KF1nw/7BxVb8bxO5T00AnGDFNahDq3ItyisrbOkElDw18oN1eULrtZFH1UopjDE # 3HKwR2nb4X7MfcLirVXXxwO1GgIxUkeCsVEY6hpg3TxDPRhPW2toNpNt/WCfFKgq # ZdYdaKgkON/xHQPv6kgQzU2n9Zpuznj0CE9A3k1mAyBcCSitsvu4TW6AQBKmLgUR # 9lu61onfX9XoPxZv3abuY3c3UyzevOc6BUT67dmr8naAhHLyBU+DWAW6Kg0Dtc9j # p+bwxIDRimK50DJt9l13OLSAJyhrW1gMsPPGb+48OClpEOhHwq8oqRuMFpbHaQ0/ # 2MMtMbavXtzBScfmLzR3yw2IwohxSXKMe+7irkJiG/hc8/gtpRATaaS+zfvS0rla # QybWYtJyjmW+QUOnmBsKGwT0PWJcOd3bKtVPgPd7WGeHGVtTBOqU/svExaO+gIv8 # uX1gOelEgLmLenUjc/Wp4cHgnePTBK8vG1g3IrEtcCblhwpr0e3/aJgHGgO3cQzH # X9P2buwHyLzjsie9S1ebG9Ceg/VsGQpxNGISZdG+Z4c3+GYu5gcGQcqIAuFmwBnE # QHSNHJXITyWjo7UuqL7e1J7vROUKn0S15V9MO/yOmZgkqubu4Gt3jGcJtIGqIBlu # MFra7SiVjKBnt6PD3aKEdD9uahbqFUfmX9411ZmYUUzpfflKnCQ= # =IY/i # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Feb 2023 08:09:05 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20230207' of https://github.com/legoater/qemu: (25 commits) aspeed/sdmc: Drop unnecessary scu include tests/avocado: Test Aspeed Zephyr SDK v00.01.08 on AST1030 board hw/arm/aspeed_ast10x0: Add TODO comment to use Cortex-M4F hw/arm/aspeed_ast10x0: Map HACE peripheral hw/arm/aspeed_ast10x0: Map the secure SRAM hw/arm/aspeed_ast10x0: Map I3C peripheral hw/arm/aspeed_ast10x0: Add various unimplemented peripherals hw/misc/aspeed_hace: Do not crash if address_space_map() failed hw/watchdog/wdt_aspeed: Log unimplemented registers as UNIMP level hw/watchdog/wdt_aspeed: Extend MMIO range to cover more registers hw/watchdog/wdt_aspeed: Rename MMIO region size as 'iosize' hw/nvram/eeprom_at24c: Make reset behavior more like hardware hw/arm/aspeed: Add aspeed_eeprom.c hw/nvram/eeprom_at24c: Add init_rom field and at24c_eeprom_init_rom helper hw/arm/aspeed: Replace aspeed_eeprom_init with at24c_eeprom_init hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boards hw/core/loader: Remove declarations of option_rom_has_mr/rom_file_has_mr tests/avocado/machine_aspeed.py: Mask systemd services to speed up SDK boot tests/avocado/machine_aspeed.py: update buildroot tests m25p80: Add the is25wp256 SFPD table ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-07Merge tag 'pull-riscv-to-apply-20230207' of ↵Peter Maydell32-328/+1847
https://github.com/alistair23/qemu into staging Third RISC-V PR for QEMU 8.0 * Update disas for xnor/orn/andn and slli.uw * Update opentitan IRQs * Fix rom code when Zicsr is disabled * Update VS timer whenever htimedelta changes * A collection of fixes for virtulisation * Set tval for triggered watchpoints * Cleanups for board and FDT creation * Add support for the T-Head vendor extensions * A fix for virtual instr exception * Fix ctzw behavior * Fix SBI getchar handler for KVM # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPh+QQACgkQIeENKd+X # cFSdHwf9HQkO8/zTnWUFCbLVQAV3RB32i6E26uNC4+fQBpcqRWAel2PMYGi6x0H/ # fU43B5YpS7Ddfcc1ql6pJlisqsjkIsQBYjOeUfiMozLIR0dvX14jgUMxc0A8e8sZ # uv3iRXjkVz/7bEWIdflPcaXgXh74HcQCPgMDsteluZYaz4yRGP6SvI9UJHqe4tjI # HbiYmP1pcWFGDsAlKx7KbHfH/v9CE03odN3MLzwdsGYekUaFkdLlj7hmyamnqbAh # OR1y29i2od/8uJMeIu5R8rnGdWoWetCZWP0z2xv3rrZuUzMJ6VXHcdWsY9ycomJs # rYA0NB/ezmnKX+QAf+8TzW2nybG+5Q== # =XLpK # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Feb 2023 07:08:52 GMT # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * tag 'pull-riscv-to-apply-20230207' of https://github.com/alistair23/qemu: (32 commits) hw/riscv: virt: Simplify virt_{get,set}_aclint() target/riscv: fix SBI getchar handler for KVM target/riscv: fix ctzw behavior target/riscv: fix for virtual instr exception target/riscv: add a MAINTAINERS entry for XThead* extension support RISC-V: Adding XTheadFmv ISA extension RISC-V: Add initial support for T-Head C906 RISC-V: Set minimum priv version for Zfh to 1.11 RISC-V: Adding T-Head FMemIdx extension RISC-V: Adding T-Head MemIdx extension RISC-V: Adding T-Head MemPair extension RISC-V: Adding T-Head multiply-accumulate instructions RISC-V: Adding XTheadCondMov ISA extension RISC-V: Adding XTheadBs ISA extension RISC-V: Adding XTheadBb ISA extension RISC-V: Adding XTheadBa ISA extension RISC-V: Adding XTheadSync ISA extension RISC-V: Adding XTheadCmo ISA extension hw/riscv: change riscv_compute_fdt_addr() semantics hw/riscv: split fdt address calculation from fdt load ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-07Merge tag 'migration-20230206-pull-request' of ↵Peter Maydell53-233/+2134
https://gitlab.com/juan.quintela/qemu into staging Migration Pull request In this try - rebase to latest upstream - same than previous patch - fix compilation on non linux (userfaultfd.h) (me) - query-migrationthreads (jiang) - fix race on reading MultiFDPages_t.block (zhenzhong) - fix flush of zero copy page send reuest (zhenzhong) Please apply. Previous try: It includes: - David Hildenbrand fixes for virtio-men - David Gilbert canary to detect problems - Fix for rdma return values (Fiona) - Peter Xu uffd_open fixes - Peter Xu show right downtime for postcopy - manish.mishra msg fix fixes - my vfio changes. Please apply. # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmPhobYACgkQ9IfvGFhy # 1yMNaA/9EHDPqrI1HL/VkJG4nNOOsQR7RbburXEberZOzvLjnqpjUD3Ls9qV6rx+ # ieHa5T4imYJFk72Wa5vx4r1/dCjtJD2W6jg5+/0nTvYAHrs1U1VRqpuTr0HiXdbJ # ZLLCnW5eDyO3eMaOX0MUkgHgL0FNkc/Lq5ViCTFsMu9O9xMuDLLdAC3cdvslKuOu # X1gKByr9jT817Y9e36amYmRaJKC6Cr/PIekNVFu12HBW79pPusLX8KWEf4RBw4HR # sPwTvMCR/BwZ0+2Lppan60G5rt/ZxDu40oU7y+RHlfWqevl4hDM84/nhjMvEgzc5 # a4Ahe2ERGLwwnC8z3l7v9+pEzSGzDoPcnRGvZcpUpk68wTDtxd5Bdq8CwmNUfL07 # VzWcYpH0yvmwjBba9jfn9fAVgnG5rVp558XcYLIII3wEToty3UDtm43wSdj2CGr6 # cu+IPAp+n/I5G9SRYBTU9ozJz45ttnEe0hxUtZ4I3MuhzHi1VEDAqTWM/X0LyS41 # TB3Y5B2KKpJYbPyZEH4nyTeetR2k7alTFzahCgKqVfOgL0nJx54petjS1K+B1P72 # g6lhP9WnQ33W+M8S7J/aGEaDJd1lFyFB2Rdjn2ZZnASH/fR9j0mFmXWvulXtjFNp # Sfim3887+Iv4Uzw4VWEe3mM5Ypi/Ba2CmuTjy/pM08Ey8X1Qs5o= # =ZQbR # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Feb 2023 00:56:22 GMT # gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full] # gpg: aka "Juan Quintela <quintela@trasno.org>" [full] # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * tag 'migration-20230206-pull-request' of https://gitlab.com/juan.quintela/qemu: (30 commits) migration: save/delete migration thread info migration: Introduce interface query-migrationthreads multifd: Fix flush of zero copy page send request multifd: Fix a race on reading MultiFDPages_t.block migration: check magic value for deciding the mapping of channels io: Add support for MSG_PEEK for socket channel migration/dirtyrate: Show sample pages only in page-sampling mode migration: Perform vmsd structure check during tests migration: Add canary to VMSTATE_END_OF_LIST migration/rdma: fix return value for qio_channel_rdma_{readv,writev} migration: Show downtime during postcopy phase virtio-mem: Proper support for preallocation with migration virtio-mem: Migrate immutable properties early virtio-mem: Fail if a memory backend with "prealloc=on" is specified migration/ram: Factor out check for advised postcopy migration/vmstate: Introduce VMSTATE_WITH_TMP_TEST() and VMSTATE_BITMAP_TEST() migration/savevm: Allow immutable device state to be migrated early (i.e., before RAM) migration/savevm: Prepare vmdesc json writer in qemu_savevm_state_setup() migration/savevm: Move more savevm handling into vmstate_save() migration/ram: Optimize ram_write_tracking_start() for RamDiscardManager ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-07Merge tag 'qemu-macppc-20230206' of https://github.com/mcayland/qemu into ↵Peter Maydell12-108/+114
staging qemu-macppc patches for 8.0 # -----BEGIN PGP SIGNATURE----- # # iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmPheL4eHG1hcmsuY2F2 # ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIflMUIAKeDljnot7I3cF3y # XnkPtPOUrzurii348hgQAULbDcnffkwstoML8vVpjt6tK9fZDduWB2bcXm00BFPr # tFXmW/IZaQ1Z9yEXEpFRUU1L68gGYyXCFEmBjE4fE2WoSRRQObkx7IGgFLBk7L3t # hyLx1kSBziSxgnkoX8ZQqMTweLjcllWA8s9+EtfpyTOu0mewKtbcAEyUwaJQTPPT # tfgMxjXdNquK89KXGelDiGHAKzMgCAnX2jVEkrw1PKKgLsf1FrQVDPJkWMhWv82x # FaCjyzL7YEn+h9Gd1j5JmhqYYKPF8akIs4bfrwcl9blyNRbb/NWF/odYgM1WIy8x # fQDJcwc= # =RB4n # -----END PGP SIGNATURE----- # gpg: Signature made Mon 06 Feb 2023 22:01:34 GMT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * tag 'qemu-macppc-20230206' of https://github.com/mcayland/qemu: mac_oldworld: Allow specifying nvram backing store mac_nvram: Add block backend to persist NVRAM contents hw/misc/macio: Return bool from functions taking errp hw/misc/macio: Remove some single use local variables hw/misc/macio: Rename sysbus_dev to sbd for consistency and brevity hw/misc/macio: Avoid some QOM casts mac_{old,new}world: Use local variable instead of qdev_get_machine() input/adb: Only include header where needed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-07aspeed/sdmc: Drop unnecessary scu includeJoel Stanley1-1/+0
The model includes aspeed_scu.h but doesn't appear to require it. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230124062022.298230-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07tests/avocado: Test Aspeed Zephyr SDK v00.01.08 on AST1030 boardPhilippe Mathieu-Daudé1-1/+40
Add a very quick test that runs some commands in a Zephyr shell: $ tests/venv/bin/avocado --show=app,console run -t os:zephyr tests/avocado (2/2) tests/avocado/machine_aspeed.py:AST1030Machine.test_ast1030_zephyros_1_07: console: *** Booting Zephyr OS build v00.01.07 *** console: ast1030_evb demo console: SOC: AST1030-A1 console: uart:~$ kernel stacks console: 0x36910 wdt_background (real size 1024): unused 988 usage 36 / 1024 (3 %) console: 0x36ad8 shell_uart (real size 4096): unused 3084 usage 1012 / 4096 (24 %) console: 0x2edb8 ADC0 (real size 400): unused 260 usage 140 / 400 (35 %) console: 0x2f0f0 ADC1 (real size 400): unused 260 usage 140 / 400 (35 %) console: 0x3b098 sysworkq (real size 1024): unused 860 usage 164 / 1024 (16 %) console: 0x36cc0 usbdworkq (real size 1024): unused 860 usage 164 / 1024 (16 %) console: 0x36bd8 usbworkq (real size 1024): unused 860 usage 164 / 1024 (16 %) console: 0x36a10 logging (real size 768): unused 548 usage 220 / 768 (28 %) console: 0x36ef8 idle 00 (real size 320): unused 268 usage 52 / 320 (16 %) console: 0x47800 IRQ 00 (real size 2048): unused 1504 usage 544 / 2048 (26 %) console: uart:~$ otp info scu console: SCU BIT reg_protect Description console: ____________________________________________________________________ console: 0x500 0x0 0x0 Disable ARM CM4 CPU boot (TXD5) console: 0x500 0x1 0x0 /Reserved console: 0x500 0x2 0x0 \ " console: 0x500 0x3 0x0 Address offset of single chip ABR mode console: 0x500 0x4 0x0 /Reserved console: 0x500 0x5 0x0 | " console: 0x500 0x6 0x0 | " console: 0x500 0x7 0x0 | " console: 0x500 0x8 0x0 | " console: 0x500 0x9 0x0 | " console: 0x500 0xA 0x0 | " console: 0x500 0xB 0x0 | " console: 0x500 0xC 0x0 | " console: 0x500 0xD 0x0 | " console: 0x500 0xE 0x0 | " console: 0x500 0xF 0x0 | " console: 0x500 0x10 0x0 \ " console: 0x500 0x11 0x0 Disabl3 ARM JTAG debug console: 0x500 0x12 0x0 /Reserved console: 0x500 0x13 0x0 | " console: 0x500 0x14 0x0 | " console: 0x500 0x15 0x0 | " console: 0x500 0x16 0x0 | " console: 0x500 0x17 0x0 | " console: 0x500 0x18 0x0 | " console: 0x500 0x19 0x0 | " console: 0x500 0x1A 0x0 | " console: 0x500 0x1B 0x0 | " console: 0x500 0x1C 0x0 | " console: 0x500 0x1D 0x0 | " console: 0x500 0x1E 0x0 | " console: 0x500 0x1F 0x0 \ " console: 0x510 0x0 0x0 /Reserved console: 0x510 0x1 0x0 | " console: 0x510 0x2 0x0 | " console: 0x510 0x3 0x0 \ " console: 0x510 0x4 0x0 Disable debug interfaces console: 0x510 0x5 0x0 /Reserved console: 0x510 0x6 0x0 | " console: 0x510 0x7 0x0 \ " console: 0x510 0x8 0x0 Enable boot from Uart5 by Pin Strap console: 0x510 0x9 0x0 /Reserved console: 0x510 0xA 0x0 \ " console: 0x510 0xB 0x0 Enable boot SPI ABR console: 0x510 0xC 0x0 Boot SPI ABR Mode console: 0x510 0xD 0x0 /Boot SPI flash size console: 0x510 0xE 0x0 | " console: 0x510 0xF 0x0 \ " console: 0x510 0x10 0x0 /Reserved console: 0x510 0x11 0x0 | " console: 0x510 0x12 0x0 | " console: 0x510 0x13 0x0 | " console: 0x510 0x14 0x0 | " console: 0x510 0x15 0x0 \ " console: 0x510 0x16 0x0 Enable boot SPI auxiliary control pins console: 0x510 0x19 0x0 /Reserved console: 0x510 0x1A 0x0 | " console: 0x510 0x1B 0x0 | " console: 0x510 0x1C 0x0 | " console: 0x510 0x1D 0x0 | " console: 0x510 0x1E 0x0 | " console: 0x510 0x1F 0x0 \ " console: 0x510 0x1E 0x0 Enable dedicate GPIO strap pins console: 0x510 0x1F 0x0 Enable Secure Boot by Pin Strap console: uart:~$ hwinfo devid console: Length: 8 console: ID: 0x0000018000000180 console: uart:~$ crypto aes256_cbc_vault console: aes256_cbc vault key 1 console: Was waiting for: console: 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a console: ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 console: 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef console: f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 console: But got: console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 console: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 console: uart:~$ random get console: 0x862460d console: uart:~$ i2c scan I2C_0 console: 0 1 2 3 4 5 6 7 8 9 a b c d e f console: 00: -- -- -- -- -- -- -- -- -- -- -- -- console: 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- console: 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- console: 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- console: 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- console: 50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- console: 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- console: 70: -- -- -- -- -- -- -- -- console: 1 devices found on I2C_0 console: uart:~$ kernel uptime console: Uptime: 9897 ms console: uart:~$ kernel reboot warm console: *** Booting Zephyr OS build v00.01.07 *** PASS (1.08 s) Ref: https://github.com/AspeedTech-BMC/zephyr/releases/download/v00.01.07/Aspeed_Zephy_SDK_User_Guide_v00.01.07.pdf Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Add TODO comment to use Cortex-M4FPhilippe Mathieu-Daudé1-1/+1
This SoC uses a Cortex-M4F. QEMU only implements a M4, which is good enough. Add a TODO note in case the M4F is added. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map HACE peripheralPhilippe Mathieu-Daudé1-0/+15
Since I don't have access to the datasheet, the relevant values were found in: https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Before on Zephyr: uart:~$ hash test sha256_test tv[0]:hash_final error sha384_test tv[0]:hash_final error sha512_test tv[0]:hash_final error [00:00:06.278,000] <err> hace_global: HACE poll timeout [00:00:09.324,000] <err> hace_global: HACE poll timeout [00:00:12.261,000] <err> hace_global: HACE poll timeout uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098 [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340 [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:09.743,000] <inf> hace_global: HACE_STS: 0 [00:00:09.743,000] <err> hace_global: HACE poll timeout [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ After: uart:~$ hash test sha256_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS sha384_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS sha512_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 Was waiting for: 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 But got: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (encryption): 80 [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2018 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (decryption): 64 [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map the secure SRAMPhilippe Mathieu-Daudé2-1/+13
Some SRAM appears to be used by the Secure Boot unit and crypto accelerators. Name it 'secure sram'. Note, the SRAM base address was already present but unused (the 'SBC' index is used for the MMIO peripheral). Interestingly using CFLAGS=-Winitializer-overrides reports: ../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] [ASPEED_DEV_SBC] = 0x7E6F2000, ^~~~~~~~~~ ../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here [ASPEED_DEV_SBC] = 0x79000000, ^~~~~~~~~~ This fixes with Zephyr: uart:~$ rsa test rsa test vector[0]: [00:00:26.156,000] <err> os: ***** BUS FAULT ***** [00:00:26.157,000] <err> os: Precise data bus error [00:00:26.157,000] <err> os: BFAR Address: 0x79000000 [00:00:26.158,000] <err> os: r0/a1: 0x79000000 r1/a2: 0x00000000 r2/a3: 0x00001800 [00:00:26.158,000] <err> os: r3/a4: 0x79001800 r12/ip: 0x00000800 r14/lr: 0x0001098d [00:00:26.158,000] <err> os: xpsr: 0x81000000 [00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc [00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0 [00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart) [00:00:26.165,000] <err> os: Halting system Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: Fixed size of Secure Boot Controller Memory ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map I3C peripheralPhilippe Mathieu-Daudé1-0/+16
Since I don't have access to the datasheet, the relevant values were found in: https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Add various unimplemented peripheralsPhilippe Mathieu-Daudé2-0/+46
Based on booting Zephyr demo from [1] running QEMU with '-d unimp' and checking missing devices in [2]. [1] https://github.com/AspeedTech-BMC/zephyr/releases/tag/v00.01.07 [2] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/misc/aspeed_hace: Do not crash if address_space_map() failedPhilippe Mathieu-Daudé1-6/+15
address_space_map() can fail: uart:~$ hash test sha256_test tv[0]: Segmentation fault: 11 Thread 3 "qemu-system-arm" received signal SIGSEGV, Segmentation fault. gen_acc_mode_iov (req_len=0x7ffff18b7778, id=<optimized out>, iov=0x7ffff18b7780, s=0x555556ce0bd0) at ../hw/misc/aspeed_hace.c:171 171 if (has_padding(s, &iov[id], *req_len, &total_msg_len, &pad_offset)) { (gdb) bt #0 gen_acc_mode_iov (req_len=0x7ffff18b7778, id=<optimized out>, iov=0x7ffff18b7780, s=0x555556ce0bd0) at ../hw/misc/aspeed_hace.c:171 #1 do_hash_operation (s=s@entry=0x555556ce0bd0, algo=3, sg_mode=sg_mode@entry=true, acc_mode=acc_mode@entry=true) at ../hw/misc/aspeed_hace.c:224 #2 0x00005555559bdbb8 in aspeed_hace_write (opaque=<optimized out>, addr=12, data=262488, size=<optimized out>) at ../hw/misc/aspeed_hace.c:358 This change doesn't fix much, but at least the guest can't crash QEMU anymore. Instead it is still usable: uart:~$ hash test sha256_test tv[0]:hash_final error sha384_test tv[0]:hash_final error sha512_test tv[0]:hash_final error [00:00:06.278,000] <err> hace_global: HACE poll timeout [00:00:09.324,000] <err> hace_global: HACE poll timeout [00:00:12.261,000] <err> hace_global: HACE poll timeout uart:~$ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/watchdog/wdt_aspeed: Log unimplemented registers as UNIMP levelPhilippe Mathieu-Daudé2-1/+14
Add more Aspeed watchdog registers from [*]. Since guests can righteously access them, log the access at 'unimplemented' level instead of 'guest-errors'. [*] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/drivers/watchdog/wdt_aspeed.c#L31 Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/watchdog/wdt_aspeed: Extend MMIO range to cover more registersPhilippe Mathieu-Daudé1-1/+2
When booting the Zephyr demo in [1] we get: aspeed.io: unimplemented device write (size 4, offset 0x185128, value 0x030f1ff1) <-- aspeed.io: unimplemented device write (size 4, offset 0x18512c, value 0x03fffff1) This corresponds to this Zephyr code [2]: static int aspeed_wdt_init(const struct device *dev) { const struct aspeed_wdt_config *config = dev->config; struct aspeed_wdt_data *const data = dev->data; uint32_t reg_val; /* disable WDT by default */ reg_val = sys_read32(config->ctrl_base + WDT_CTRL_REG); reg_val &= ~WDT_CTRL_ENABLE; sys_write32(reg_val, config->ctrl_base + WDT_CTRL_REG); sys_write32(data->rst_mask1, config->ctrl_base + WDT_SW_RESET_MASK1_REG); <------ sys_write32(data->rst_mask2, config->ctrl_base + WDT_SW_RESET_MASK2_REG); return 0; } The register definitions are [3]: #define WDT_RELOAD_VAL_REG 0x0004 #define WDT_RESTART_REG 0x0008 #define WDT_CTRL_REG 0x000C #define WDT_TIMEOUT_STATUS_REG 0x0010 #define WDT_TIMEOUT_STATUS_CLR_REG 0x0014 #define WDT_RESET_MASK1_REG 0x001C #define WDT_RESET_MASK2_REG 0x0020 #define WDT_SW_RESET_MASK1_REG 0x0028 <------ #define WDT_SW_RESET_MASK2_REG 0x002C #define WDT_SW_RESET_CTRL_REG 0x0024 Currently QEMU only cover a MMIO region of size 0x20: #define ASPEED_WDT_REGS_MAX (0x20 / 4) Change to map the whole 'iosize' which might be bigger, covering the other registers. The MemoryRegionOps read/write handlers will report the accesses as out-of-bounds guest-errors, but the next commit will report them as unimplemented. [1] https://github.com/AspeedTech-BMC/zephyr/releases/tag/v00.01.07 [2] https://github.com/AspeedTech-BMC/zephyr/commit/2e99f10ac27b [3] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/drivers/watchdog/wdt_aspeed.c#L31 Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/watchdog/wdt_aspeed: Rename MMIO region size as 'iosize'Philippe Mathieu-Daudé5-11/+11
Avoid confusing two different things: - the WDT I/O region size ('iosize') - at which offset the SoC map the WDT ('offset') While it is often the same, we can map smaller region sizes at larger offsets. Here we are interested in the I/O region size, so rename as 'iosize'. Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [ clg: Introduced temporary wdt_offset variable ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/nvram/eeprom_at24c: Make reset behavior more like hardwarePeter Delevoryas1-12/+10
EEPROM's are a form of non-volatile memory. After power-cycling an EEPROM, I would expect the I2C state machine to be reset to default values, but I wouldn't really expect the memory to change at all. The current implementation of the at24c EEPROM resets its internal memory on reset. This matches the specification in docs/devel/reset.rst: Cold reset is supported by every resettable object. In QEMU, it means we reset to the initial state corresponding to the start of QEMU; this might differ from what is a real hardware cold reset. It differs from other resets (like warm or bus resets) which may keep certain parts untouched. But differs from my intuition. For example, if someone writes some information to an EEPROM, then AC power cycles their board, they would expect the EEPROM to retain that information. It's very useful to be able to test things like this in QEMU as well, to verify software instrumentation like determining the cause of a reboot. Fixes: 5d8424dbd3e8 ("nvram: add AT24Cx i2c eeprom") Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-6-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed: Add aspeed_eeprom.cPeter Delevoryas4-3/+109
- Create aspeed_eeprom.c and aspeed_eeprom.h - Include aspeed_eeprom.c in CONFIG_ASPEED meson source files - Include aspeed_eeprom.h in aspeed.c - Add fby35_bmc_fruid data - Use new at24c_eeprom_init_rom helper to initialize BMC FRUID EEPROM with data from aspeed_eeprom.c wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd qemu-system-aarch64 -machine fby35-bmc -nographic -mtdblock fby35.mtd ... user: root pass: 0penBmc ... root@bmc-oob:~# fruid-util bb FRU Information : Baseboard --------------- : ------------------ Chassis Type : Rack Mount Chassis Chassis Part Number : N/A Chassis Serial Number : N/A Board Mfg Date : Fri Jan 7 10:30:00 2022 Board Mfg : XXXXXX Board Product : Management Board wBMC Board Serial : XXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXX Board FRU ID : 1.0 Board Custom Data 1 : XXXXXXXXX Board Custom Data 2 : XXXXXXXXXXXXXXXXXX Product Manufacturer : XXXXXX Product Name : Yosemite V3.5 EVT2 Product Part Number : XXXXXXXXXXXXXX Product Version : EVT2 Product Serial : XXXXXXXXXXXXX Product Asset Tag : XXXXXXX Product FRU ID : 1.0 Product Custom Data 1 : XXXXXXXXX Product Custom Data 2 : N/A root@bmc-oob:~# fruid-util bmc FRU Information : BMC --------------- : ------------------ Board Mfg Date : Mon Jan 10 21:42:00 2022 Board Mfg : XXXXXX Board Product : BMC Storage Module Board Serial : XXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXX Board FRU ID : 1.0 Board Custom Data 1 : XXXXXXXXX Board Custom Data 2 : XXXXXXXXXXXXXXXXXX Product Manufacturer : XXXXXX Product Name : Yosemite V3.5 EVT2 Product Part Number : XXXXXXXXXXXXXX Product Version : EVT2 Product Serial : XXXXXXXXXXXXX Product Asset Tag : XXXXXXX Product FRU ID : 1.0 Product Custom Data 1 : XXXXXXXXX Product Custom Data 2 : Config A root@bmc-oob:~# fruid-util nic FRU Information : NIC --------------- : ------------------ Board Mfg Date : Tue Nov 2 08:51:00 2021 Board Mfg : XXXXXXXX Board Product : Mellanox ConnectX-6 DX OCP3.0 Board Serial : XXXXXXXXXXXXXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXXXXXXXXX Board FRU ID : FRU Ver 0.02 Product Manufacturer : XXXXXXXX Product Name : Mellanox ConnectX-6 DX OCP3.0 Product Part Number : XXXXXXXXXXXXXXXXXXXXX Product Version : A9 Product Serial : XXXXXXXXXXXXXXXXXXXXXXXX Product Custom Data 3 : ConnectX-6 DX Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-5-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/nvram/eeprom_at24c: Add init_rom field and at24c_eeprom_init_rom helperPeter Delevoryas2-5/+47
Allows users to specify binary data to initialize an EEPROM, allowing users to emulate data programmed at manufacturing time. - Added init_rom and init_rom_size attributes to TYPE_AT24C_EE - Added at24c_eeprom_init_rom helper function to initialize attributes - If -drive property is provided, it overrides init_rom data Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Ninad Palsule <ninadpalsule@us.ibm.com> Link: https://lore.kernel.org/r/20230128060543.95582-4-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed: Replace aspeed_eeprom_init with at24c_eeprom_initPeter Delevoryas1-52/+43
aspeed_eeprom_init is an exact copy of at24c_eeprom_init, not needed. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-3-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boardsPeter Delevoryas4-24/+41
This helper is useful in board initialization because lets users initialize and realize an EEPROM on an I2C bus with a single function call. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/core/loader: Remove declarations of option_rom_has_mr/rom_file_has_mrCédric Le Goater1-3/+0
These globals were moved to MachineClass by commit 71ae9e94d9 ("pc: Move option_rom_has_mr/rom_file_has_mr globals to MachineClass"). Finish cleanup. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07tests/avocado/machine_aspeed.py: Mask systemd services to speed up SDK bootCédric Le Goater1-2/+9
Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20230119123449.531826-8-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07tests/avocado/machine_aspeed.py: update buildroot testsCédric Le Goater1-4/+4
Use buildroot 2022.11 based images plus some customization : - Linux version is bumped to 6.0.9 and kernel is built with a custom config similar to what OpenBMC provides. - U-Boot is switched to the one provided by OpenBMC for better support. - defconfigs includes more target tools for dev. Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20230119123449.531826-7-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07m25p80: Add the is25wp256 SFPD tableGuenter Roeck3-1/+44
Generated from hardware using the following command and then padding with 0xff to fill out a power-of-2: xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp Cc: Michael Walle <michael@walle.cc> Cc: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20221221122213.1458540-1-linux@roeck-us.net> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07avocado/boot_linux_console.py: Update ast2600 testJoel Stanley1-6/+6
Update the test_arm_ast2600_debian test to - the latest Debian kernel - use the Rainier machine instead of Tacoma Both of which contains support for more hardware and thus exercises more of the hardware Qemu models. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220607011938.1676459-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/net: Fix read of uninitialized memory in ftgmac100Stephen Longfield1-2/+2
With the `size += 4` before the call to `crc32`, the CRC calculation would overrun the buffer. Size is used in the while loop starting on line 1009 to determine how much data to write back, with the last four bytes coming from `crc_ptr`, so do need to increase it, but should do this after the computation. I'm unsure why this use of uninitialized memory in the CRC doesn't result in CRC errors, but it seems clear to me that it should not be included in the calculation. Signed-off-by: Stephen Longfield <slongfield@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20221220221437.3303721-1-slongfield@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07aspeed: Add Supermicro X11 SPI machine typeGuenter Roeck1-0/+33
supermicrox11-bmc is configured with ast2400-a1 SoC. This does not match the Supermicro documentation for X11 BMCs, and it does not match the devicetree file in the Linux kernel. As it turns out, some Supermicro X11 motherboards use AST2400 SoCs, while others use AST2500. Introduce new machine type supermicrox11-spi-bmc with AST2500 SoC to match the devicetree description in the Linux kernel. Hardware configuration details for this machine type are guesswork and taken from defaults as well as from the Linux kernel devicetree file. The new machine type was tested with aspeed-bmc-supermicro-x11spi.dts from the Linux kernel and with Linux versions 6.0.3 and 6.1-rc2. Linux booted successfully from initrd and from both SPI interfaces. Ethernet interfaces were confirmed to be operational. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20221025165109.1226001-1-linux@roeck-us.net [ clg: Renamed machine to 'supermicro-x11spi-bmc' ] Message-Id: <20221025165109.1226001-1-linux@roeck-us.net> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07tests/avocado: Truncate M2S-FG484 SOM SPI flash to 16MiBPhilippe Mathieu-Daudé2-1/+6
The M2S-FG484 SOM uses a 16 MiB SPI flash (Spansion S25FL128SDPBHICO). Since the test asset is bigger, truncate it to the correct size to avoid when running the test_arm_emcraft_sf2 test: qemu-system-arm: device requires 16777216 bytes, block backend provides 67108864 bytes Add comment regarding the M2S-FG484 SOM hardware in hw/arm/msf2-som.c. Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07tests/avocado: Introduce file_truncate()Philippe Mathieu-Daudé1-0/+5
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20230120134314.81956-2-philmd@linaro.org [ clg: remove image_pow2ceil_expand() factoring ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/riscv: virt: Simplify virt_{get,set}_aclint()Bin Meng1-4/+2
There is no need to declare an intermediate "MachineState *ms". Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230206085007.3618715-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07target/riscv: fix SBI getchar handler for KVMVladimir Isaev1-2/+3
Character must be returned via ret[0] field (copied to a0 by KVM). Return value should be set to 0 to indicate successful processing. Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230203135155.12449-1-vladimir.isaev@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07target/riscv: fix ctzw behaviorVladimir Isaev1-0/+1
According to spec, ctzw should work with 32-bit register, not 64. For example, previous implementation returns 33 for (1<<33) input when the new one returns 32. Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230204082312.43557-1-vladimir.isaev@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07target/riscv: fix for virtual instr exceptionDeepak Gupta1-0/+1
commit fb3f3730e4 added mechanism to generate virtual instruction exception during instruction decode when virt is enabled. However in some situations, illegal instruction exception can be raised due to state of CPU. One such situation is implementing branch tracking. [1] An indirect branch if doesn't land on a landing pad instruction, then cpu must raise an illegal instruction exception. Implementation would raise such expcetion due to missing landing pad inst and not due to decode. Thus DisasContext must have `virt_inst_excp` initialized to false during DisasContxt initialization for TB. [1] - https://github.com/riscv/riscv-cfi Signed-off-by: Deepak Gupta <debug@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230127191758.755844-1-debug@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07target/riscv: add a MAINTAINERS entry for XThead* extension supportChristoph Müllner1-0/+8
The XThead* extensions are maintained by T-Head and VRULL. Adding a point of contact from both companies. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-15-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Adding XTheadFmv ISA extensionChristoph Müllner5-3/+55
This patch adds support for the XTheadFmv ISA extension. The patch uses the T-Head specific decoder and translation. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-14-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Add initial support for T-Head C906Christoph Müllner3-0/+38
This patch adds the T-Head C906 to the list of known CPUs. Selecting this CPUs will automatically enable the available ISA extensions of the CPUs (incl. vendor extensions). Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-13-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Set minimum priv version for Zfh to 1.11Christoph Müllner1-1/+1
There are no differences for floating point instructions in priv version 1.11 and 1.12. There is also no dependency for Zfh to priv version 1.12. Therefore allow Zfh to be enabled for priv version 1.11. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-12-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Adding T-Head FMemIdx extensionChristoph Müllner5-1/+123
This patch adds support for the T-Head FMemIdx instructions. The patch uses the T-Head specific decoder and translation. Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-11-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Adding T-Head MemIdx extensionChristoph Müllner5-1/+464
This patch adds support for the T-Head MemIdx instructions. The patch uses the T-Head specific decoder and translation. Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-10-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Adding T-Head MemPair extensionChristoph Müllner5-1/+109
This patch adds support for the T-Head MemPair instructions. The patch uses the T-Head specific decoder and translation. Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-9-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Adding T-Head multiply-accumulate instructionsChristoph Müllner5-1/+96
This patch adds support for the T-Head MAC instructions. The patch uses the T-Head specific decoder and translation. Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-8-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Adding XTheadCondMov ISA extensionChristoph Müllner5-1/+43
This patch adds support for the XTheadCondMov ISA extension. The patch uses the T-Head specific decoder and translation. Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-7-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07RISC-V: Adding XTheadBs ISA extensionChristoph Müllner5-1/+23
This patch adds support for the XTheadBs ISA extension. The patch uses the T-Head specific decoder and translation. Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-6-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.1 at 2025-01-14 07:46:59 +0000