aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-09-30virtio-9p: fix virtio-9p child refcount in transportsGonglei1-0/+1
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon unplug the virtio-9p child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-9p: use aliases instead of duplicate qdev propertiesGonglei1-1/+1
virtio-9p-pci all duplicate the qdev properties of their V9fsState child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the V9fsState child. This way no duplication is necessary. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-balloon: fix virtio-balloon child refcount in transportsGonglei2-2/+2
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-balloon child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-rng: fix virtio-rng child refcount in transportsGonglei3-0/+3
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-rng child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-rng: use aliases instead of duplicate qdev propertiesGonglei3-3/+3
virtio-rng-{pci, s390, ccw} all duplicate the qdev properties of their VirtIORNG child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIORNG child. This way no duplication is necessary. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-serial: fix virtio-serial child refcount in transportsGonglei3-0/+3
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-serial child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-serial: use aliases instead of duplicate qdev propertiesGonglei3-3/+3
virtio-serial-{pci, s390, ccw} all duplicate the qdev properties of their VirtIOSerial child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIOSerial child. This way no duplication is necessary. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio/vhost-scsi: fix virtio-scsi/vhost-scsi child refcount in transportsGonglei3-0/+6
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-scsi/vhost-scsi child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio/vhost-scsi: use aliases instead of duplicate qdev propertiesGonglei3-6/+6
{virtio, vhost}-scsi-{pci, s390, ccw} all duplicate the qdev properties of their VirtIOSCSI/VHostSCSI child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIOSCSI/VHostSCSI child. This way no duplication is necessary. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-net: fix virtio-net child refcount in transportsGonglei3-0/+3
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-net child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-net: use aliases instead of duplicate qdev propertiesGonglei3-6/+3
virtio-net-pci, virtio-net-s390, and virtio-net-ccw all duplicate the qdev properties of their VirtIONet child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIONet child. This way no duplication is necessary. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23virtio-scsi: Make virtio_scsi_push_event publicFam Zheng2-2/+4
Later this will be called by dataplane code. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23virtio-scsi: Make virtio_scsi_free_req publicFam Zheng2-1/+2
To share with dataplane code later. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23virtio-scsi: Make virtio_scsi_init_req publicFam Zheng2-1/+2
To share with datplane code later. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23virtio-scsi: Split virtio_scsi_handle_ctrl_req from virtio_scsi_handle_ctrlFam Zheng2-27/+34
To share with dataplane code. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23virtio-scsi: Split virtio_scsi_handle_cmd_req from virtio_scsi_handle_cmdFam Zheng2-74/+79
This is the "common part" to handle one cmd request. Refactor out for later usage of dataplane iothread code. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23virtio-scsi: clean up virtio_scsi_parse_cdbPaolo Bonzini1-7/+1
The command direction according to the guest-passed buffers is already stored in the VirtIOSCSIReq. We can use it instead of computing it again from req->elem. Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23vhost-scsi: use virtio_ldl_pPaolo Bonzini1-2/+3
This helps for cross-endian configurations. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23virtio-scsi: Optimize virtio_scsi_init_reqFam Zheng1-7/+17
The VirtQueueElement is a very big structure (>48k!), since it will be initialzed by virtqueue_pop, we can save the expensive zeroing here. This saves a few microseconds per request in my test: [fio-test] rw bs iodepth jobs bw iops latency -------------------------------------------------------------------------------------------- Before read 4k 1 1 110 28269 34 After read 4k 1 1 131 33745 28 Whereas, virtio-blk read 4k 1 1 217 55673 16 Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23scsi: Optimize scsi_req_allocFam Zheng2-10/+19
Zeroing sense buffer for each scsi request is not efficient, we can just leave it uninitialized because sense_len is set to 0. Move the implicitly zeroed fields to the end of the structure and use a partial memset. The explicitly initialized fields (by scsi_req_alloc or scsi_req_new) are moved to the beginning of the structure, before sense buffer, to skip the memset. Also change g_malloc0 to g_slice_alloc. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell72-946/+2806
staging # gpg: Signature made Mon 22 Sep 2014 12:41:59 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: (59 commits) block: Always compile virtio-blk dataplane vring: Better error handling if num is too large virtio: Import virtio_vring.h async: aio_context_new(): Handle event_notifier_init failure block: vhdx - fix reading beyond pointer during image creation block: delete cow block driver block/archipelago: Fix typo in qemu_archipelago_truncate() ahci: Add test_identify case to ahci-test. ahci: Add test_hba_enable to ahci-test. ahci: Add test_hba_spec to ahci-test. ahci: properly shadow the TFD register ahci: add test_pci_enable to ahci-test. ahci: Add test_pci_spec to ahci-test. ahci: MSI capability should be at 0x80, not 0x50. ahci: Adding basic functionality qtest. layout: Add generators for refcount table and blocks fuzz: Add fuzzing functions for entries of refcount table and blocks docs: List all image elements currently supported by the fuzzer qapi/block-core: Add "new" qcow2 options qcow2: Add overlap-check.template option ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-23Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-09-22' ↵Peter Maydell11-47/+54
into staging trivial patches for 2014-09-22 # gpg: Signature made Mon 22 Sep 2014 09:10:03 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB * remotes/mjt/tags/trivial-patches-2014-09-22: arch_init: Setting QEMU_ARCH enum straight pc: Add missing 'static' attribute block: allow creation of fixed vhdx images vl: Print maxmem in hex format for error message configure: trivial fixes xen-hvm.c: Always return -1 when failure occurs in xen_hvm_init() rdma: Fix incorrect description in comments Fix typos and misspellings in comments qemu-char: Permit only a single "stdio" character device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-22block: Always compile virtio-blk dataplaneFam Zheng5-41/+6
Dataplane doesn't depend on linux-aio any more, so we don't need the compiling condition now. Configure options are kept but just print a message. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1410329871-28885-4-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22vring: Better error handling if num is too largeFam Zheng1-1/+2
To be more consistent inside this function. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1410329871-28885-3-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22virtio: Import virtio_vring.hFam Zheng4-3/+170
This header has no further dependencies. It only has some stable data types and primitive functions, so we can copy it to include/hw/virtio in order to allow vring code (and its user virtio-blk dataplane) to be built unconditionally, even for cross compiling. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1410329871-28885-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22async: aio_context_new(): Handle event_notifier_init failureChrysostomos Nanakos12-18/+78
On a system with a low limit of open files the initialization of the event notifier could fail and QEMU exits without printing any error information to the user. The problem can be easily reproduced by enforcing a low limit of open files and start QEMU with enough I/O threads to hit this limit. The same problem raises, without the creation of I/O threads, while QEMU initializes the main event loop by enforcing an even lower limit of open files. This commit adds an error message on failure: # qemu [...] -object iothread,id=iothread0 -object iothread,id=iothread1 qemu: Failed to initialize event notifier: Too many open files in system Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22block: vhdx - fix reading beyond pointer during image creationJeff Cody1-8/+8
In vhdx_create_metadata(), we allocate 40 bytes to entry_buffer for the various metadata table entries. However, we write out 64kB from that buffer into the new file. Only write out the correct 40 bytes. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22block: delete cow block driverStefan Hajnoczi12-462/+12
This patch removes support for the cow file format. Normally we do not break backwards compatibility but in this case there is no impact and it is the most logical option. Extraordinary claims require extraordinary evidence so I will show why removing the cow block driver is the right thing to do. The cow file format is the disk image format for Usermode Linux, a way of running a Linux system in userspace. The performance of UML was never great and it was hacky, but it enjoyed some popularity before hardware virtualization support became mainstream. QEMU's block/cow.c is supposed to read this image file format. Unfortunately the file format was underspecified: 1. Earlier Linux versions used the MAXPATHLEN constant for the backing filename field. The value of MAXPATHLEN can change, so Linux switched to a 4096 literal but QEMU has a 1024 literal. 2. Padding was not used on the header struct (both in the Linux kernel and in QEMU) so the struct layout varied across architectures. In particular, i386 and x86_64 were different due to int64_t alignment differences. Linux now uses __attribute__((packed)), QEMU does not. Therefore: 1. QEMU cow images do not conform to the Linux cow image file format. 2. cow images cannot be shared between different host architectures. This means QEMU cow images are useless and QEMU has not had bug reports from users actually hitting these issues. Let's get rid of this thing, it serves no purpose and no one will be affected. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22block/archipelago: Fix typo in qemu_archipelago_truncate()Chrysostomos Nanakos1-1/+1
Fix a typo introduced by 94c80a438c85f2c19698547fbb115ea46d80c5f1 Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: Add test_identify case to ahci-test.John Snow1-0/+304
Utilizing all of the bring-up code in pci_enable and hba_enable, this test issues a simple IDENTIFY command via the HBA and retrieves the response via the PIO receive mechanisms of the HBA. Bugs: The DPS interrupt (Descriptor Processed Status) does not currently get set. This will need to be adjusted in a future patch series when the AHCI DMA pathways are reworked to allow the feature, which may be utilized by OSX guests. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: Add test_hba_enable to ahci-test.John Snow1-0/+156
This test engages the HBA functionality and initializes values to sane defaults to allow for minimal HBA functionality. Buffers are allocated and pointers are updated to allow minimal I/O commands to complete as expected. Error registers and responses are sanity checked for specification adherence. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: Add test_hba_spec to ahci-test.John Snow1-1/+560
Add a test routine that checks the boot-up values of the HBA configuration memory space against the AHCI 1.3 specification and Intel ICH9 data sheet (for Q35 machines) for adherence and sane values. The HBA is not yet engaged or put into the idle state. [Replaced g_assert_false(...) with g_assert(!...) for glib <2.38 compatibility, reported by Peter Maydell <peter.maydell@linaro.org>. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1408643079-30675-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: properly shadow the TFD registerJohn Snow1-14/+28
In a real AHCI device, several S/ATA registers are mirrored or shadowed within the AHCI register set. These registers are not updated synchronously for each read access, but are instead updated after a Device-to-Host Register FIS packet is received. The D2H FIS contains the values from these registers on the device. In QEMU, by reaching directly into the device to grab these bits before they are "sent," we may introduce race conditions where unexpected values are present "before they are sent" which could cause issues for some guests, particularly if an attempt is made to read the PxTFD register prior to enabling the port, where incorrect values will be read. This patch also addresses the boot-time values for the PxTFD and PxSIG registers to bring them in line with the AHCI 1.3 specification. Lastly, several fields (PxTFD, PxSIG and PxSACT) are read-only, and any attempts to write to them should be ignored. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: add test_pci_enable to ahci-test.John Snow2-0/+59
This adds a test wherein we engage the PCI AHCI device and ensure that the memory region for the HBA functionality is now accessible. Under Q35 environments, additional PCI configuration is performed to ensure that the HBA functionality will become usable. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: Add test_pci_spec to ahci-test.John Snow1-6/+299
Adds a specification adherence test for AHCI where the boot-up values for the PCI configuration space are compared against the AHCI 1.3 specification. This test does not itself attempt to engage the device. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: MSI capability should be at 0x80, not 0x50.John Snow1-1/+6
In the Intel ICH9 data sheet, the MSI capability offset in the PCI configuration space for ICH9 AHCI devices is specified to be 0x80. Further, the PCI capability pointer should always point to 0x80 in ICH9 devices, despite the fact that AHCI 1.3 specifies that it should be pointing to PMCAP (Which in this instance would be 0x70) to maintain adherence to the Intel data sheet specifications and real observed behavior. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22ahci: Adding basic functionality qtest.John Snow2-0/+198
Currently, there is no qtest to test the functionality of the AHCI functionality present within the Q35 machine type. This patch adds a skeleton for an AHCI test suite, and adds a simple sanity-check test case where we identify that the AHCI device is present, then disengage the virtual machine. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22layout: Add generators for refcount table and blocksMaria Kustova1-1/+137
Refcount structures are placed in clusters randomly selected from all unallocated host clusters. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Maria Kustova <maria.k@catit.be> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 7e2f38608db6fba2da53997390b19400d445c45d.1408450493.git.maria.k@catit.be Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22fuzz: Add fuzzing functions for entries of refcount table and blocksMaria Kustova1-1/+15
Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Maria Kustova <maria.k@catit.be> Message-id: c9f4027b6f401c67e9d18f94aed29be445e81d48.1408450493.git.maria.k@catit.be Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22docs: List all image elements currently supported by the fuzzerMaria Kustova1-1/+2
Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Maria Kustova <maria.k@catit.be> Message-id: cb71485d0f55d1d8401eebaead8324eb78673060.1408450493.git.maria.k@catit.be Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qapi/block-core: Add "new" qcow2 optionsMax Reitz1-1/+78
qcow2 supports more than four options by now, add the new options (overlap check mode and metadata cache size) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1408557576-14574-5-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qcow2: Add overlap-check.template optionMax Reitz2-2/+23
Being able to set the overlap-check option to a string and then refine it via the overlap-check.* options is a nice idea for the command line but does not work so well for non-flattened dicts. In that case, one can only specify either but not both, so add a field to overlap-check.* which does the same as directly specifying overlap-check but can be used in conjunction with the other fields in non-flattened dicts. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1408557576-14574-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qapi: Allow enums in anonymous unionsMax Reitz2-1/+4
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1408557576-14574-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qcow2: Fix leak of QemuOpts in qcow2_open()Max Reitz1-2/+3
Currently, the QemuOpts object opts is leaked if anything fails from its creation up to and including the image repair block. Fix this by freeing that object in the fail path. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Message-id: 1408557576-14574-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22hmp: fix memory leak at hmp_info_block_jobs()Gonglei1-0/+2
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1410874615-14292-1-git-send-email-arei.gonglei@huawei.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22image-fuzzer: Trivial readability and formatting improvementsMaria Kustova2-31/+28
Signed-off-by: Maria Kustova <maria.k@catit.be> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22iotests: Add more tests for qcow2 corruptionMax Reitz2-2/+105
Add tests for unaligned L1/L2/reftable entries and non-fatal corruption reports. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1409926039-29044-6-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qcow2: Check L1/L2/reftable entries for alignmentMax Reitz2-5/+82
Offsets taken from the L1, L2 and refcount tables are generally assumed to be correctly aligned. However, this cannot be guaranteed if the image has been written to by something different than qemu, thus check all offsets taken from these tables for correct cluster alignment. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1409926039-29044-5-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qcow2: Use qcow2_signal_corruption() for overlapsMax Reitz2-26/+8
Use the new function in case of a failed overlap check. This changes output in case of corruption, so adapt iotest 060's reference output accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Message-id: 1409926039-29044-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qcow2: Add qcow2_signal_corruption()Max Reitz2-0/+53
Add a helper function for easily marking an image corrupt (on fatal corruptions) while outputting an informative message to stderr and via QAPI. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Message-id: 1409926039-29044-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-12-29 18:21:33 +0000