aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-20ioh3420: pcie root port in X58 iohIsaku Yamahata3-0/+199
Implements pcie root port switch in intel X58 ioh whose device id is 0x3420. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20pcie port: define struct PCIEPort/PCIESlot and helper functionsIsaku Yamahata4-1/+170
define struct PCIEPort which represents common part of pci express port.(root, upstream and downstream.) add a helper function for pcie port which can be used commonly by root/upstream/downstream port. define struct PCIESlot which represents common part of pcie slot.(root and downstream.) and helper functions for it. helper functions for chassis, slot -> PCIESlot conversion. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20pci/bridge: fix pci_bridge_reset()Isaku Yamahata2-6/+43
The lower bits of base/limit registers is RO and shouldn't be zero cleared on reset. This patch fixes it. In fact, the default value of base/limit registers aren't specified in the spec. And some bridges disable forwarding on reset instead of zeroing base/limit registers. So introduce one function to disable bridge forwarding so that such bridges can use it. It will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20pcie: comment on hpev_intxIsaku Yamahata1-1/+9
document hpev_intx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pcie: helper functions for pcie capability and extended capabilityIsaku Yamahata5-0/+654
This patch implements helper functions for pci express capability and pci express extended capability allocation. NOTE: presence detection depends on pci_qdev_init() change. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pcie: add pcie constants to pcie_regs.hIsaku Yamahata1-0/+154
add pcie constants to pcie_regs.h. Those constants should go to Linux pci_regs.h and then the file should go away eventually. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19msi: implements msiIsaku Yamahata4-4/+401
implements msi related functions. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pci: use pci_word_test_and_clear_mask() in pci_device_reset()Isaku Yamahata1-3/+2
use pci_clear_bit_word() in pci_device_reset() where appropriate. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pci: introduce helper function to handle msi-x and msi.Isaku Yamahata2-0/+22
this patch implements helper functions to handle msi-x and msi uniformly. They will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pci: introduce helper functions to test-and-{clear, set} mask in ↵Isaku Yamahata1-0/+70
configuration space This patch introduces helper functions to test-and-{clear, set} mask in configuration space. pci_{byte, word, long, quad}_test_and_{clear, set}_mask(). They will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-18pci: make pci_del_capability() update for w1cmaskIsaku Yamahata1-0/+1
Clear w1cmask when deleting a pci capability. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-20msix: clear not only INTA, but all INTx when MSI-X is enabled.Isaku Yamahata1-1/+4
clear not only INTA, but all INTx when MSI-X is enabled. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-20pci: implement RW1C register framework.Isaku Yamahata2-0/+8
Implement RW1C register framework. With this patch, it would be easy to implement W1C(Write 1 to Clear) register by just setting w1cmask. Later RW1C register will be used by pcie. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-13pci: improve signature of pci_register_bar().Isaku Yamahata2-2/+2
Make type uint8_t from int because PCIIORegion::type is uint8_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-09-13pci: don't ignore invalid parameter for pci_register_bar().Isaku Yamahata1-3/+2
Abort when invalid value for region_num is passed to pci_register_bar. That is caller's bug. Abort instead of silently ignoring invalid value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-13pci: sorting out type confusion in pci_register_bar().Isaku Yamahata1-1/+1
This patch sorts out invalid use of pcibus_t. In pci_register_bar(), pcibus_t wmask is used. It should, however, be uint64_t because it is used to set pci configuration space value(PCIDevice::wmask) by pci_set_quad() or pci_set_long(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-13pci_ids.h: add vendor id of Texas IntesrumentsIsaku Yamahata1-0/+2
add vendor id of Texas Intesruments. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci: make pci_parse_devfn() aware of func.Isaku Yamahata2-8/+28
make pci_parse_devfn() aware of func. With func = NULL it behave as before. This will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci: call hotplug callback even when not hotplug case for later use.Isaku Yamahata2-1/+5
call hotplug callback even when not hotplug case for later use. And move hotplug check into hotplug callback. PCIE slot needs this for card presence detection. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci bridge: add helper function for ssvid capability.Isaku Yamahata2-0/+22
helper function to add ssvid capability. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci: consolidate pci_add_capability_at_offset() into pci_add_capability().Isaku Yamahata4-21/+24
By making pci_add_capability() the special case of pci_add_capability_at_offset() of offset = 0, consolidate pci_add_capability_at_offset() into pci_add_capability(). Cc: Stefan Weil <weil@mail.berlios.de> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci_bridge: introduce pci bridge library.Isaku Yamahata6-84/+178
introduce pci bridge library. convert apb bridge and dec p2p bridge to use new pci bridge library. save/restore is supported as a side effect. This is also preparation for pci express root/upstream/downstream port. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-22pci_bridge: clean up: remove pci_{register, unregister}_secondary_bus()Isaku Yamahata1-22/+10
Remove pci_{register, unregister}_secondary_bus() by open code. They are old stype API and aren't used any more by others. So eliminate it. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-22pci_bridge: rename PCIBridge::bus -> PCIBridge::sec_bus.Isaku Yamahata2-7/+5
To avoid confusion of primary bus with secondary bus, rename PCIBridge::bus to PCIBridge::sec_bus. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-22pci/bridge: split out pci bridge code into pci_bridge.c from pci.cIsaku Yamahata7-180/+262
Move pci bridge related code into pci_bridge.c from pci.c for further enhancement. pci.c is big enough now, so split it out. No code change but exporting some accesser functions. In fact, few pci bridge functions stays in pci.c. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19pci: move out pci internal structures, PCIBus, PCIBridge, and pci_bus_info.Isaku Yamahata2-30/+42
move out pci internal structures, PCIBus, PCIBridge and pci_bus_info into private header file, pci_internals.h. This is a preparation. Later pci bridge implementation will be split out form pci.c into pci_bridge.c. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19vhost: fix miration during device startMichael S. Tsirkin1-10/+11
We need to know ring layout to allocate log buffer. So init rings first. Also fixes a theoretical memory-leak-on-error. https://bugzilla.redhat.com/show_bug.cgi?id=615228 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com>
2010-07-19e1000: secrc supportMichael S. Tsirkin1-1/+10
Add support for secrc field. Reportedly needed by old RHEL guests. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19e1000: fix access 4 bytes beyond buffer endMichael S. Tsirkin1-2/+1
We do range check for size, and get size as buffer, but copy size + 4 bytes (4 is for FCS). Let's copy size bytes but put size + 4 in length. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-12Merge branch 'master' into pciMichael S. Tsirkin1-2/+8
2010-07-12target-sh4: Add support for ldc & stc with sgrAlexandre Courbot1-0/+2
Add support for the following missing priviledged intructions: For SH4: - stc sgr, Rn - stc.l sgr, @-Rn For SH4A: - ldc Rm, sgr - ldc.l @Rm+, sgr Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-12target-sh4: Split the LDST macro into 2 sub-macrosAlexandre Courbot1-2/+6
The LDST macro is used to generate ldc and stc instructions that work with a specific register. However, the SGR register only supports stc up to SH4A, which supports both stc and ldc. This patch creates two sub-macros named LD and ST that handle generating ldc and stc instructions separately, and redeclares LDST to use these sub-macro. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-11pci: fix bridge updateMichael S. Tsirkin1-1/+3
bridge config write should trigger updates on the secondary bus. never on the primary bus. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11virtio-net: correct packet length mathMichael S. Tsirkin1-13/+28
We were requesting too much when checking buffer length: size already includes host header length. Further, we should not exit if we get a packet that is too long, since this might not be under control of the guest. Just drop the packet. Red Hat bz 591494 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pci hotplug: make pci hotplug return value to callerIsaku Yamahata1-4/+9
make pci hotplug callback return value to caller. And when returning error, allocated resources are freed. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11vmware_vga: fix reset value for command registerMichael S. Tsirkin1-3/+0
Make init value for this register match the spec. BAR address is 0 at init, so enabling it only works by chance. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11rtl8139: address TODOsMichael S. Tsirkin1-3/+0
Make rtl8139 spec compliant, fixing reset values for command register. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pci hotplug: make pci_device_hot_remove() staticIsaku Yamahata2-2/+1
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pcnet: address TODOsMichael S. Tsirkin1-14/+2
pcnet enables memory/io on init, which does not make sense as BAR values are wrong. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-07-11pci: fix pci_device_resetIsaku Yamahata1-4/+13
Clear interrupt disable bit on reset, according to PCI spec. Fix pci_device_reset() with 64bit BAR. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11AppleSMC device emulationAlexander Graf2-1/+242
Intel Macs have a chip called the "AppleSMC" which they use to control certain Apple specific parts of the hardware, like the keyboard background light. That chip is also used to store a key that Mac OS X uses to decrypt binaries. This patch adds emulation for that chip, so we're getting one step further to having Mac OS X run natively on Qemu. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11Documentation: Fix spelling bugsStefan Weil1-2/+2
rewuired -> required ths -> this Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11Makefile: Not every shell support {}Hidetoshi Seto1-1/+2
So interpret it by hand. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11Makefile: add fsdev/*.{o,d} to cleanHidetoshi Seto1-1/+1
There were fsdev/qemu-fsdev.{o,d} not removed at "make clean". Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: set PCI multi-function bit appropriately.Isaku Yamahata4-7/+52
Set PCI multi-function bit according to multifunction property. PCI address, devfn ,is exported to users as addr property, so users can populate pci function(PCIDevice in qemu) at arbitrary devfn. It means each function(PCIDevice) don't know whether pci device (PCIDevice[8]) is multi function or not. So this patch allows user to set multifunction bit via property and checks whether multifunction bit is set correctly. Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci_bridge: make pci bridge aware of pci multi function bit.Isaku Yamahata4-6/+8
make pci bridge aware of pci multi function property and let pci generic code to set the bit. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: set multifunction property for normal device.Isaku Yamahata2-2/+2
use pci_create_simple_multifunction() for normal device which sets multifunction bit. At the moment, only pc_piix.c and mips_malta.c uses multifunction devices with piix3/4 pci-isa bridge. And other boards don't populate those devices. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: introduce multifunction property.Isaku Yamahata2-3/+28
introduce multifunction property. Also introduce new convenient device creation function which will be used later. For bisectability this patch doesn't do anything, but sets the property resulting in no functional changes. Actual changes will be introduced by later patch. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11qdev: implement qdev_prop_set_bit().Isaku Yamahata2-0/+6
implement qdev_prop_set_bit(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: remove PCIDeviceInfo::header_typeIsaku Yamahata4-11/+16
replace PCIDeviceInfo::header_type with is_bridge as suggested by Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-28 15:00:50 +0000