aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-14qapi: Fix enumeration typo errorLei Li2-3/+3
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-14console: Clean up bytes per pixel calculationBALATON Zoltan1-3/+2
Division with round up is the correct way to compute this even if the only case where division with round down gives incorrect result is probably 15 bpp. This case was explicitely patched up in one of these functions but was unhandled in the other. (I'm not sure about setting 16 bpp for the 15bpp case either but I left that there for now.) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14Fix copy&paste typos in documentation commentsBALATON Zoltan1-5/+6
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14linux-user: Remove #if 0'd cpu_get_real_ticks() definitionPeter Maydell1-13/+0
Remove the cpu_get_real_ticks() definition from linux-user/main.c. This has been disabled via #if 0 and unused since commit 1dce7c3c22 in 2006; the definitions we actually use are in qemu-timer.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14ui: Fix spelling in comment (ressource -> resource)Stefan Weil1-1/+1
The function is called interface_release_resource. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14Spelling fixes in comments and macro names (ressource -> resource)Stefan Weil1-3/+3
Macro XEN_HOST_PCI_RESOURCE_BUFFER_SIZE is only used locally, so the change should be safe. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14Fix spelling (licenced -> licensed) in GPLStefan Weil3-5/+5
The patch also fixes the case of "written". Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14Spelling fixes in comments and documentationStefan Weil6-14/+14
These wrong spellings were detected by codespell: * successully -> successfully * alot -> a lot * wanna -> want to * infomation -> information * occured -> occurred ["also is" -> "is also" and "ressources" -> "resources" suggested by Peter Maydell <peter.maydell@linaro.org>] Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14srp: Don't use QEMU_PACKED for single elements of a structured typeStefan Weil1-4/+4
QEMU_PACKED results in a MinGW compiler warning when it is used for single structure elements: warning: 'gcc_struct' attribute ignored Using QEMU_PACKED for the whole structure avoids the compiler warning without changing the memory layout. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-11Merge branch 'usb.64' of git://git.kraxel.org/qemuAurelien Jarno13-1042/+1376
* 'usb.64' of git://git.kraxel.org/qemu: (54 commits) xhci: allow bytewise capability register reads xhci: kill xhci_mem_{read,write} dispatcher functions xhci: support multiple interrupters xhci: pick target interrupter xhci: prepare xhci_runtime_{read,write} for multiple interrupters xhci: add XHCIInterrupter xhci: move register update into xhci_intr_raise xhci: add msix support xhci: rework interrupt handling xhci: fix & cleanup msi. usb-storage: usb3 support usb3: bos decriptor usb3: superspeed endpoint companion usb3: superspeed descriptors xhci: update port handling xhci: update register layout xhci: fix runtime write tracepoint xhci: add trace_usb_xhci_ep_set_dequeue xhci: trace cc codes in cleartext xhci: iso xfer support ...
2012-09-11tcg/optimize: fix if/else/break coding styleAurelien Jarno1-23/+11
optimizer.c contains some cases were the break is appearing in both the if and the else parts. Fix that by moving it to the outer part. Also move some common code there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg/optimize: add constant folding for brcondAurelien Jarno1-1/+26
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg/optimize: add constant folding for setcondAurelien Jarno1-0/+81
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg/optimize: swap brcond/setcond arguments when possibleAurelien Jarno1-0/+18
brcond and setcond ops are not commutative, but it's easy to compute the new condition after swapping the arguments. Try to always put the constant argument in second position like for commutative ops, to help backends to generate better code. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg/optimize: simplify shift/rot r, 0, a => movi r, 0 casesAurelien Jarno1-0/+20
shift/rot r, 0, a is equivalent to movi r, 0. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg/optimize: simplify and r, a, 0 casesAurelien Jarno1-0/+1
and r, a, 0 is equivalent to a movi r, 0. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg/optimize: simplify or/xor r, a, 0 casesAurelien Jarno1-0/+2
or/xor r, a, 0 is equivalent to a mov r, a. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg/optimize: split expression simplificationAurelien Jarno1-1/+13
Split expression simplification in multiple parts so that a given op can appear multiple times. This patch should not change anything. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11tcg: improve profilerAurelien Jarno2-1/+12
Now that there are two passes of optimization (optimize.c, liveness) there is no point of outputing the statistics of the liveness part only. Update the code to take into account both optimizations. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-11xhci: allow bytewise capability register readsGerd Hoffmann1-1/+3
Some guests need this according to Alejandro Martinez Ruiz <alex@securiforest.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: kill xhci_mem_{read,write} dispatcher functionsGerd Hoffmann1-65/+75
... and register subregions instead, so we offload the dispatching to the the memory subsystem which is designed to handle it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: support multiple interruptersGerd Hoffmann1-5/+1
Everything is in place, flip the big switch now and enable support for multiple interrupters. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: pick target interrupterGerd Hoffmann1-6/+16
Pick the correct interrupter when queuing an event. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: prepare xhci_runtime_{read,write} for multiple interruptersGerd Hoffmann1-43/+57
Prepare xhci runtime register access function for multiple interrupters. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: add XHCIInterrupterGerd Hoffmann2-148/+161
Move all state belonging to the (single) interrupter into a separate struct. First step in adding support for multiple interrupters. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: move register update into xhci_intr_raiseGerd Hoffmann1-9/+5
Now that we have a separate function to raise an IRQ we can move some comon code into the function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: add msix supportGerd Hoffmann2-1/+49
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: rework interrupt handlingGerd Hoffmann1-14/+33
Split xhci_irq_update into a function which handles intx updates (including lowering the irq line once the guests acks the interrupt) and one which is used for raising an irq only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: fix & cleanup msi.Gerd Hoffmann1-18/+9
Drop custom write_config function which isn't needed any more. Make the msi property a bit property so it accepts 'on' & 'off'. Enable MSI by default. TODO: add compat property to disable on old machine types. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-storage: usb3 supportGerd Hoffmann1-3/+43
Add usb3 descriptors to usb-storage, so it shows up as superspeed device when connected to xhci. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb3: bos decriptorGerd Hoffmann4-0/+141
Add support for creating BOS descriptor and device cappability descriptors. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb3: superspeed endpoint companionGerd Hoffmann3-20/+62
Add support for building superspeed endpoint companion descriptors, create them for superspeed usb devices. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb3: superspeed descriptorsGerd Hoffmann2-1/+10
Add superspeed descriptor entry to USBDesc, advertise superspeed support when present. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: update port handlingGerd Hoffmann1-40/+97
This patch changes the way xhci ports are linked to USBPorts. The fixed 1:1 relationship between xhci ports and USBPorts is gone. Now each USBPort represents a physical plug which has usually two xhci ports assigned: one usb2 and ond usb3 port. usb devices show up at one or the other, depending on whenever they support superspeed or not. This patch also makes the number of usb2 and usb3 ports runtime configurable by adding 'p2' and 'p3' properties. It is allowed to have different numbers of usb2 and usb3 ports. Specifying p2=4,p3=2 will give you an xhci adapter which supports all speeds on physical ports 1+2 and usb2 only on ports 3+4.
2012-09-11xhci: update register layoutGerd Hoffmann1-8/+13
Change the register layout to be a bit more sparse and also not depend on the number of ports. Useful when for making the number of ports runtime-configurable.
2012-09-11xhci: fix runtime write tracepointGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: add trace_usb_xhci_ep_set_dequeueGerd Hoffmann2-1/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: trace cc codes in cleartextGerd Hoffmann2-2/+48
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: iso xfer supportGerd Hoffmann1-16/+101
Add support for iso transfers. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: implement mfindexGerd Hoffmann1-7/+46
Implement mfindex register and mfindex wrap event. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: move device lookup into xhci_setup_packetGerd Hoffmann1-36/+38
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: drop bufferingGerd Hoffmann2-115/+72
This patch splits the xhci_xfer_data function into three. The xhci_xfer_data function used to do does two things: (1) copy transfer data between guest memory and a temporary buffer. (2) report transfer results to the guest using events. Now we three functions to handle this: (1) xhci_xfer_map creates a scatter list for the transfer and uses that (instead of the temporary buffer) to build a USBPacket. (2) xhci_xfer_unmap undoes the mapping. (3) xhci_xfer_report sends out events. The patch also fixes reporting of transaction errors which must be reported unconditinally, not only in case the guest asks for it using the ISP flag. [ v2: fix warning ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: rip out background transfer codeGerd Hoffmann1-219/+4
original xhci code (the one which used libusb directly) used to use 'background transfers' for iso streams. In upstream qemu the iso stream buffering is handled by usb-host & usb-redir, so we will never ever need this. It has been left in as reference, but is dead code anyway. Rip it out. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-audio: fix usb versionGerd Hoffmann1-1/+1
usb-audio is a full speed (1.1) device, but bcdUSB claims it is usb 2.0. Fix it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11Better name usb braille deviceSamuel Thibault1-1/+1
Windows users need to know that they have to use the Baum driver to make the qemu braille device work. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Enable pipelining for bulk endpointsHans de Goede1-0/+3
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Ensure our peer has the necessary caps when redirecting to XHCIHans de Goede1-0/+11
In order for redirection to work properly when redirecting to an emulated XHCI controller, the usb-redir-host must support both usb_redir_cap_ep_info_max_packet_size and usb_redir_cap_64bits_ids, reject any devices redirected to an XHCI controller when these are not supported. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Add a usbredir_reject_device helper functionHans de Goede1-10/+11
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Set ep max_packet_size if availableHans de Goede1-0/+5
This is needed for usb-redir to work properly with the xhci emulation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Convert to new libusbredirparser 0.5 APIHans de Goede2-32/+32
This gives us support for 64 bit ids which is needed for using XHCI with the new hcd generated ids. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.1 at 2025-01-29 22:59:24 +0000