aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-08-31Add VMState support for ptimersBlue Swirl2-0/+28
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-31esp (sparc32) Extra scsi data.Artyom Tarasenko1-1/+2
> ESP: Message Accepted (12) > ESP: Transfer status (sense=0) > ESP: read reg[5]: 0x20 > ESP: read reg[4]: 0x07 > ESP: read reg[7]: 0x02 > Extra scsi data. Fatal error. It looks like "Message Accepted" shouldn't write a response. At least ESP_RFLAGS must definetely be 0. With the following fix OBP goes one step further: Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-31Fix compiler warningsStefan Weil1-2/+2
Starting with commit df7a86ed735eafefbd046c8cad7134652fe3f600, mingw32 builds result in a compiler warning for dns_addr: CC slirp/slirp.o /home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: missing braces around initializer /home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: (near initialization for ‘dns_addr.S_un’) Removing the assignment fixes the warning without the need of special code for mingw32 (and also saves some bytes in the resulting binary). To fix another potential compiler warning, the missing 'static' attribute was added. The same changes were applied to dns_addr_time. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-31Fix breakage due to __threadBlue Swirl1-1/+1
Thread-local storage is not supported on all hosts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-29Fix gcc 3 warning: comparison is always true due to limited range of data typeBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-29Fix gcc 3 warning about uninitialized variableBlue Swirl1-1/+1
If nb_sectors is 0, cluster_offset will not be initialized. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-29Sparc32: port Slavio misc devices to VMState designBlue Swirl1-38/+19
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-29Sparc32: port ECC memory controller to VMState designBlue Swirl1-33/+13
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Sparc32: port IOMMU to VMState designBlue Swirl1-25/+12
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Sparc32: port DMA controller to VMState designBlue Swirl1-22/+11
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Sparc32: port TCX to VMState designBlue Swirl1-33/+21
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Sparc32: port interrupt controller to VMState designBlue Swirl1-25/+28
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Update OpenBIOS images to r569Blue Swirl4-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Suppress kraxelismsBlue Swirl2-3/+5
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Fix Sparc64 breakage: add dummy ISA irqsBlue Swirl1-0/+8
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Fix merge of 59f2a78793b6d17634f39646d604e84af51e0919Blue Swirl1-2/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-28Don't compile aio code if CONFIG_LINUX_AIO is undefinedStefan Weil1-1/+7
This patch fixes linker errors when building QEMU without Linux AIO support. It is based on suggestions from malc and Kevin Wolf. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-28Fix sb16 breakage due to unassigned s->irqmalc1-0/+1
Signed-off-by: malc <av1474@comtv.ru>
2009-08-28Fix formattingmalc2-2/+2
Signed-off-by: malc <av1474@comtv.ru>
2009-08-27Merge commit 'linux-user/linux-user-for-upstream' into stagingAnthony Liguori5-59/+510
2009-08-27Relax pthreads check to avoid win32Anthony Liguori1-1/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27e1000 cleanupJuan Quintela1-5/+5
Remove un needed casts from void *. Use DO_UPCAST() instead of blind casts Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27pcnet: Add pci_pcnet_{save/load} functions, then remove PCNetState pci_dev fieldJuan Quintela1-13/+26
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27pcnet: remove useless casts This are casts to the very type of the functionJuan Quintela1-6/+6
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27pcnet: Change casts to DO_UPCAST() for PCIPCNetStateJuan Quintela1-4/+4
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add pci_cirrus_vga_{save/load} functions, then remove vga.pci_dev useJuan Quintela1-12/+27
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27cirrus_vga: Change casts to DO_UPCAST() for PCICirrusVGAStateJuan Quintela1-5/+5
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27cirrus_vga: remove pointless cast from void *Juan Quintela1-5/+5
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add pci_ne2000_{save/load} functions, then remove pci_dev NE2000State fieldJuan Quintela2-17/+30
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27We need PCINE2000State for save/load functionsJuan Quintela1-5/+5
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ne2000: Change casts to DO_UPCAST() for PCINE2000StateJuan Quintela1-2/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ne2000: pci_dev has this very value with the right typeJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ne2000: remove casts from void *Juan Quintela1-2/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27usb-ohci: Change casts to DO_UPCAST() for OHCIPCIStateJuan Quintela1-3/+4
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Everything outside of vga.c should use VGACommonStateJuan Quintela4-14/+14
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27vga: Rename vga_state -> vgaJuan Quintela1-6/+6
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Introduce vga_common_reset() to be able to typcheck vga_reset()Juan Quintela3-5/+9
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27lsi53c895a: LSIState is a DeviceHostJuan Quintela1-1/+1
Go figure. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27lsi53c895a: rename PCIDevice field from pci_dev to dev (consistence)Juan Quintela1-12/+12
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27lsi53c895a: use DO_UPCAST to cast from PCIDeviceJuan Quintela1-5/+5
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27lsi53c895a: remove pointless cast from void *Juan Quintela1-19/+19
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27rtl8139: remove pointless cast from void *Juan Quintela1-2/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27rtl8139: Remove unneeded double indirection of PCIRTL8139StateJuan Quintela1-25/+13
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27eepro100: Remove unused indirection of PCIDeviceJuan Quintela1-34/+23
Once there, there is no way that we don't have a PCI Device at save/load time. Remove the check Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27eepro100: cast a void * makes no senseJuan Quintela1-3/+3
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27eepro100: convert casts to DO_UPCAST()Juan Quintela1-4/+4
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27slirp: Read host DNS config on demandEd Swierk6-14/+44
Currently the qemu user-mode networking stack reads the host DNS configuration (/etc/resolv.conf or the Windows equivalent) only once when qemu starts. This causes name lookups in the guest to fail if the host is moved to a different network from which the original DNS servers are unreachable, a common occurrence when the host is a laptop. This patch changes the slirp code to read the host DNS configuration on demand, caching the results for at most 1 second to avoid unnecessary overhead if name lookups occur in rapid succession. On non-Windows hosts, /etc/resolv.conf is re-read only if the file has been replaced or if its size or mtime has changed. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27slirp: Remove our_addr codeEd Swierk2-18/+0
Three problems with our_addr: - It's determined only once when qemu starts, but the address can change (just like the DNS configuration can). - It's supposed to be the IP address of a host network interface, but there's no guarantee that gethostbyname(gethostname()) actually does that: the host might be a laptop that has only a loopback interface up, or the hostname might be localhost.localdomain, etc. - It's useless at best: get_dns_addr() calls it, there's no reason to send DNS requests to a different IP address if you're running a DNS server on the host and resolv.conf points to 127.0.0.1. These problems are easily solved by removing the code. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27switch balloon initialization to -device.Gerd Hoffmann3-25/+18
With that patch applied "-balloon virtio,args" becomes a shortcut for "-device virtio-balloon-pci,args". Side effects: - ballon device gains support for id=<tag>. - ballon device is off by default now. - initialization order changes, which may in different pci slot assignment depending on the VM configuration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: move code to hw/ide/Gerd Hoffmann9-30/+37
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2025-01-08 03:56:31 +0000