aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-02-04hw/ppc: Don't include m48t59.h if it is not necessaryThomas Huth4-5/+0
These files don't use anything from m48t59.h, so no need to include this header here. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04spapr_pci: Fix endianness in assigned-addresses propertyAlexey Kardashevskiy1-1/+1
reg->phys_hi and assigned->phys_hi are big endian but we do an extra byteswap anyway when copying reg->phys_hi to assigned->phys_hi. To make things slightly more messy, we also add a relocatable bit (b_n()) although in the right endianness. This fixes endianness of assigned->phys_hi. This is unlikely to produce any visible difference though as we should end up there only in the case of PCI hotplug and even then I am not sure if (d->io_regions[i].addr == PCI_BAR_UNMAPPED) == true. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: remove various HOST_WORDS_BIGENDIAN hacks in int_helper.cMark Cave-Ayland1-110/+45
Following on from the previous work, there are numerous endian-related hacks in int_helper.c that can now be replaced with Vsr* macros. There are also a few places where the VECTOR_FOR_INORDER_I macro can be replaced with a normal iterator since the processing order is irrelevant. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: remove ROTRu32 and ROTRu64 macros from int_helper.cMark Cave-Ayland1-28/+20
Richard points out that these macros suffer from a -fsanitize=shift bug in that they improperly handle n == 0 turning it into a shift by 32/64 respectively. Replace them with QEMU's existing ror32() and ror64() functions instead. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: simplify VEXT_SIGNED macro in int_helper.cMark Cave-Ayland1-7/+7
As pointed out by Richard: it does not need the mask argument, nor does it need the recast argument. The masking is implied by the cast argument, and the recast is implied by the assignment. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: eliminate use of EL_IDX macros from int_helper.cMark Cave-Ayland1-39/+27
These macros can be eliminated by instead using the relavant Vsr* macros in the few locations where they appear. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: eliminate use of HI_IDX and LO_IDX macros from int_helper.cMark Cave-Ayland1-95/+85
The original purpose of these macros was to correctly reference the high and low parts of the VSRs regardless of the host endianness. Replace these direct references to high and low parts with the relevant VsrD macro instead, and completely remove the now-unused HI_IDX and LO_IDX macros. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: rework vmul{e,o}{s,u}{b,h,w} instructions to use Vsr* macrosMark Cave-Ayland1-21/+27
The current implementations make use of the endian-specific macros HI_IDX and LO_IDX directly to calculate array offsets. Rework the implementation to use the Vsr* macros so that these per-endian references can be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: rework vmrg{l,h}{b,h,w} instructions to use Vsr* macrosMark Cave-Ayland1-35/+19
The current implementations make use of the endian-specific macros MRGLO/MRGHI and also reference HI_IDX and LO_IDX directly to calculate array offsets. Rework the implementation to use the Vsr* macros so that these per-endian references can be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04hw/ppc/spapr: Add support for "-vga cirrus"Thomas Huth1-0/+1
The cirrus VGA card has been enabled in the PPC builds with commit 29f9cef39eb1ae55e82c ("ppc: Include vga cirrus card into the compiling process") last year. It also works on the pseries machine, even SLOF contains support for this card, so we can also support this for the "-vga" parameter here. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04QemuMacDrivers: update qemu_vga.ndrv to 90c488d built from submoduleMark Cave-Ayland2-0/+0
This update to qemu_vga.ndrv includes the following changes: - Build guest resolution list from QEMU EDID data if enabled - Fixes to re-enable 256 color mode Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04MAINTAINERS: add myself as maintainer for Mac Old World and New World machinesMark Cave-Ayland1-2/+4
I've unofficially been doing most of the work on the Mac machines for a while now, so update MAINTAINERS to reflect this. David is still happy to be listed as a reviewer as per our discussion at KVM forum. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04spapr: Drop unused parameters from fdt building helperAlexey Kardashevskiy1-5/+3
spapr_load_rtas() handles now RTAS address and size information in the FDT so drop them from spapr_build_fdt(). While we are here, fix a small typo. Fixes: 3f5dabceba24 "pseries: Consolidate construction of /rtas device tree node" Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04MAINTAINERS: Merge the two e500 sectionsThomas Huth1-10/+3
There is currently a "e500" machine section and a "ppce500" device section in the maintainers file - with some oddities: The wildcard in the device section also covers the files from the machine section. And hw/pci-host/ppce500.c is in the device section, while its header is in the machine section. This is really quite confusing, and I don't see a reason why we really need two sections here, so let's simply merge them. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04MAINTAINERS: XIVE is an interrupt controller, not a machineThomas Huth1-8/+8
The "XIVE" section is currently listed in the "PowerPC Machines" section, which is weird, since this is an interrupt controller device. Move it to the "Devices" section instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04hw/ppc: Move ppc40x_*reset() functions from ppc405_uc.c to ppc.cThomas Huth3-60/+57
Currently, it is not possible to build a QEMU binary without the ppc405_uc.c file, even if you do not want to have the embedded machines in the binary. This is bad since it's quite a bit of code and this code pulls in some more dependencies (e.g. via the usage of serial_mm_init()) which would not be needed otherwise - especially with the upcoming Kconfig-style configuration system for QEMU. The only functions from this file which are really always required for linking are the ppc40x_*reset() functions, so move these functions to ppc.c, close to the ppc40x_set_irq() function that calls them. Now we can flag ppc405_uc.c and ppc4xx_devs.c with the CONFIG_PPC4XX config switch, too. And while we're at it, replace the printf()s in these ppc40x_*reset() functions with proper calls to qemu_log_mask(). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04ppc: remove the interrupt presenters from under PowerPCCPUCédric Le Goater1-5/+0
These fields have now been replaced by equivalents under the machine data. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc: implement complete set of Vsr* macrosMark Cave-Ayland1-1/+8
This prepares us for eliminating the use of direct array access within the VMX instruction implementations. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04spapr: move the interrupt presenters under machine_dataCédric Le Goater6-18/+25
Next step is to remove them from under the PowerPCCPU Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04ppc/pnv: introduce a CPU machine_dataCédric Le Goater3-4/+24
Include the interrupt presenter under the machine_data as we plan to remove it from under PowerPCCPU Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04xive: add a get_tctx() method to the XiveRouterCédric Le Goater3-34/+47
It provides a mean to retrieve the XiveTCTX of a CPU. This will become necessary with future changes which move the interrupt presenter object pointers under the PowerPCCPU machine_data. The PowerNV machine has an extra requirement on TIMA accesses that this new method addresses. The machine can perform indirect loads and stores on the TIMA on behalf of another CPU. The PIR being defined in the controller registers, we need a way to peek in the controller model to find the PIR value. The XiveTCTX is moved above the XiveRouter definition to avoid forward typedef declarations. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04spapr/pci: Fix primary bus number for PCI bridgesDavid Hildenbrand1-4/+1
While looking at the s390x implementation, looks like spapr has a similar BUG when building the topology. The primary bus number corresponds always to the bus number of the bus the bridge is attached to. Right now, if we have two bridges attached to the same bus (e.g. root bus) this is however not the case. The first bridge will have primary bus 0, the second bridge primary bus 1, which is wrong. Fix the assignment. While at it, drop setting the PCI_SUBORDINATE_BUS temporarily to 0xff. Setting it temporarily to that value (as discussed e.g. in [1]), is only relevant for a running system that probes the buses. The value is effectively unused for us just doing a DFS. [1] http://www.science.unitn.it/~fiorella/guidelinux/tlk/node76.html Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04spapr: Forbid setting ic-mode for old machine typesGreg Kurz1-0/+5
Machine types 3.0 and older only know about the legacy XICS backend. Make it clear by erroring out if the user tries to set ic-mode on such machines. Signed-off-by: Greg Kurz <groug@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04hw/ppc/spapr: Encode the SCSI channel (bus) in the SRP LUNsThomas Huth1-3/+4
In hw/scsi/spapr_vio.c we declare that the controller supports multiple buses by specifying "max_channel = 7" there. So in the code that fixes up the device tree nodes, we must encode the channel number (a.k.a. bus number in the "Logical unit addressing format" table of SAM5) into the 64-bit LUN, too. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1663160 Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04spapr/vio: remove the "irq" property"Cédric Le Goater2-47/+6
commit efe2add7cb7f ("spapr/vio: deprecate the "irq" property") was merged in QEMU version 3.0. The "irq" property" can be removed for QEMU version 4.0. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04ppc440: Avoid reporting error when reading non-existent RAM slotBALATON Zoltan1-2/+4
When reading base register of RAM slot with no RAM we should not try to calculate register value because that will result printing an error due to invalid RAM size. Just return 0 without the error in this case. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04target/ppc/kvm: Drop useless include directiveGreg Kurz1-1/+0
It has been there since the enablement of PR KVM for PAPR, ie, commit f61b4bedaf35 in 2011. Not sure why at that time, but it is definitely not needed with the current code. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04ppc/xive: fix remaining XiveFabric namesCédric Le Goater2-4/+4
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04sam460ex: Fix support for memory larger than 1GBBALATON Zoltan2-12/+16
Fix the encoding of larger memory modules in the SoC registers which allows specifying more than 1GB memory for sam460ex. Well, only 2GB due to SoC and firmware restrictions which was the only missing value compared to what the real hardware supports. The SoC should support up to 4GB but when setting that the firmware hangs during memory test. This may be an overflow bug in the firmware which I did not try to debug but this may affect real hardware as well. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04ppc4xx: Pass array index to function instead of pointer into the arrayBALATON Zoltan2-44/+36
The sdram_set_bcr() function in ppc440_uc.c takes a pointer into an array then calculates its index from that. It's simpler and easier to just pass the index which simplifies both the function and its callers. Do similar cleanup in ppc4xx_devs.c to similar function. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04ppc4xx: Rename ppc4xx_sdram_t in ppc440_uc.c to ppc440_sdram_tBALATON Zoltan1-8/+8
There's already a struct with the same name in ppc4xx_devs.c. They are not used outside their files so don't clash but they are also not identical so rename the ppc440 specific one to distinguish them. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04ppc4xx: Use ram_addr_t in ppc4xx_sdram_adjust()BALATON Zoltan4-5/+5
To avoid overflow if larger values are added later use ram_addr_t for the sdram_bank_sizes parameter to match ram_size to which it is compared. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04sam460ex: Clean up SPD EEPROM creationBALATON Zoltan1-153/+20
Get rid of code from MIPS Malta board used to create SPD EEPROM data (parts of which was not even needed for sam460ex) and use the generic spd_data_generate() function to simplify this. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04smbus: Add a helper to generate SPD EEPROM dataBALATON Zoltan2-0/+132
There are several boards with SPD EEPROMs that are now using duplicated or slightly different hard coded data. Add a helper to generate SPD data for a memory module of given type and size that could be used by these boards (either as is or with further changes if needed) which should help cleaning this up and avoid further duplication. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04pseries: Update SLOF firmware imageAlexey Kardashevskiy3-1/+1
This includes spapr-vio and usb-storage fixes, phandles fix for NVLink2 pass through support and other compile improvements. The full list of changes is: * vio-vscsi: Support multiple channels / buses * board-qemu/slof/vio-vscsi: Scan up to 64 SCSI IDs * usb/storage: Implement block write support * usb/storage: Invert the logic of the IF-statements * fdt: Fix phandles for NVLink/NVLink2 * fdt: Factor out code to replace a phandle in place * pci: use appropriate base class ids * Makefile: Set a proper DRIVER_NAME when building from a git tree * romfs/tools: Silence more compiler warnings with GCC 8.1 * romfs/tools: Silence GCC 8.1 compiler warning with FLASHFS_MAGIC * romfs/tools: Remove superfluous union around the rom header struct * make.rules: Compile SLOF with -fno-asynchronous-unwind-tables Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-01Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell44-417/+1931
Block layer patches: - vmdk: Support for blockdev-create - block: Apply auto-read-only for ro-whitelist drivers - virtio-scsi: Fixes related to attaching/detaching iothreads - scsi-disk: Fixed erroneously detected multipath setup with multiple disks created with node-names. Added device_id property. - block: Fix hangs in synchronous APIs with iothreads - block: Fix invalidate_cache error path for parent activation - block-backend, mirror, qcow2, vpc, vdi, qemu-iotests: Minor fixes and code improvements # gpg: Signature made Fri 01 Feb 2019 15:23:10 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (27 commits) scsi-disk: Add device_id property scsi-disk: Don't use empty string as device id qtest.py: Wait for the result of qtest commands block: Fix invalidate_cache error path for parent activation iotests/236: fix transaction kwarg order iotests: Filter second BLOCK_JOB_ERROR from 229 virtio-scsi: Forbid devices with different iothreads sharing a blockdev scsi-disk: Acquire the AioContext in scsi_*_realize() virtio-scsi: Move BlockBackend back to the main AioContext on unplug block: Eliminate the S_1KiB, S_2KiB, ... macros block: Remove blk_attach_dev_legacy() / legacy_dev code block: Apply auto-read-only for ro-whitelist drivers uuid: Make qemu_uuid_bswap() take and return a QemuUUID block/vdi: Don't take address of fields in packed structs block/vpc: Don't take address of fields in packed structs vmdk: Reject excess extents in blockdev-create iotests: Add VMDK tests for blockdev-create iotests: Filter cid numbers in VMDK extent info vmdk: Implement .bdrv_co_create callback vmdk: Refactor vmdk_create_extent ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01Merge remote-tracking branch ↵Peter Maydell36-941/+2552
'remotes/pmaydell/tags/pull-target-arm-20190201' into staging target-arm queue: * New machine mps2-an521 -- this is a model of the AN521 FPGA image for the MPS2 devboard * Fix various places where we failed to UNDEF invalid A64 instructions * Don't UNDEF a valid FCMLA on 32-bit inputs * Fix some bugs in the newly-added PAuth implementation * microbit: Implement NVMC non-volatile memory controller # gpg: Signature made Fri 01 Feb 2019 16:06:03 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190201: (47 commits) tests/microbit-test: Add tests for nRF51 NVMC arm: Instantiate NRF51 special NVM's and NVMC hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories target/arm: fix decoding of B{,L}RA{A,B} target/arm: fix AArch64 virtual address space size linux-user: Initialize aarch64 pac keys aarch64-linux-user: Enable HWCAP bits for PAuth aarch64-linux-user: Update HWCAP bits from linux 5.0-rc1 target/arm: Always enable pac keys for user-only arm: Clarify the logic of set_pc() target/arm: Enable API, APK bits in SCR, HCR target/arm: Add a timer to predict PMU counter overflow target/arm: Send interrupts on PMU counter overflow target/arm/translate-a64: Fix mishandling of size in FCMLA decode target/arm/translate-a64: Fix FCMLA decoding error exec.c: Don't reallocate IOMMUNotifiers that are in use target/arm/translate-a64: Don't underdecode SDOT and UDOT target/arm/translate-a64: Don't underdecode FP insns target/arm/translate-a64: Don't underdecode add/sub extended register target/arm/translate-a64: Don't underdecode SIMD ld/st single ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01tests/microbit-test: Add tests for nRF51 NVMCSteffen Görtz1-0/+108
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190201023357.22596-4-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01arm: Instantiate NRF51 special NVM's and NVMCSteffen Görtz2-12/+31
Instantiates UICR, FICR, FLASH and NVMC in nRF51 SOC. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190201023357.22596-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01hw/nvram/nrf51_nvm: Add nRF51 non-volatile memoriesSteffen Görtz3-0/+453
The nRF51 contains three regions of non-volatile memory (NVM): - CODE (R/W): contains code - FICR (R): Factory information like code size, chip id etc. - UICR (R/W): Changeable configuration data. Lock bits, Code protection configuration, Bootloader address, Nordic SoftRadio configuration, Firmware configuration. Read and write access to the memories is managed by the Non-volatile memory controller. Memory schema: [ CPU ] -+- [ NVM, either FICR, UICR or CODE ] | | \- [ NVMC ] Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190201023357.22596-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01target/arm: fix decoding of B{,L}RA{A,B}Remi Denis-Courmont1-1/+1
A flawed test lead to the instructions always being treated as unallocated encodings. Fixes: https://bugs.launchpad.net/bugs/1813460 Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01target/arm: fix AArch64 virtual address space sizeRemi Denis-Courmont1-1/+1
Since QEMU does not support the ARMv8.2-LVA, Large Virtual Address, extension (yet), the VA address space is 48-bits plus a sign bit. User mode can only handle the positive half of the address space, so that makes a limit of 48 bits. (With LVA, it would be 53 and 52 bits respectively.) The incorrectly large address space conflicts with PAuth instructions, which use bits 48-54 and 56-63 for the pointer authentication code. This also conflicts with (as yet unsupported by QEMU) data tagging and with the ARMv8.5-MTE extension. Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01linux-user: Initialize aarch64 pac keysRichard Henderson2-2/+31
Initialize the keys to a non-zero value on process start. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01aarch64-linux-user: Enable HWCAP bits for PAuthRichard Henderson1-0/+1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01aarch64-linux-user: Update HWCAP bits from linux 5.0-rc1Richard Henderson1-0/+9
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01target/arm: Always enable pac keys for user-onlyRichard Henderson2-60/+3
Drop the pac properties. This approach cannot work as written because the properties are applied before arm_cpu_reset, which zeros SCTLR_EL1 (amongst everything else). We can re-introduce the properties if they turn out to be useful. But since linux 5.0 enables all of the keys, they may not be. Fixes: 1ae9cfbd470 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01arm: Clarify the logic of set_pc()Julia Suvorova5-25/+39
Until now, the set_pc logic was unclear, which raised questions about whether it should be used directly, applying a value to PC or adding additional checks, for example, set the Thumb bit in Arm cpu. Let's set the set_pc logic for “Configure the PC, as was done in the ELF file” and implement synchronize_with_tb hook for preserving PC to cpu_tb_exec. Signed-off-by: Julia Suvorova <jusual@mail.ru> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190129121817.7109-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01target/arm: Enable API, APK bits in SCR, HCRRichard Henderson1-0/+6
These bits become writable with the ARMv8.3-PAuth extension. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190129143511.12311-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01target/arm: Add a timer to predict PMU counter overflowAaron Lindsay OS3-2/+92
Make PMU overflow interrupts more accurate by using a timer to predict when they will overflow rather than waiting for an event to occur which allows us to otherwise check them. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190124162401.5111-3-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01target/arm: Send interrupts on PMU counter overflowAaron Lindsay OS1-10/+51
Whenever we notice that a counter overflow has occurred, send an interrupt. This is made more reliable with the addition of a timer in a follow-on commit. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190124162401.5111-2-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-02-06 01:18:30 +0000