aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-10-13migrate: Fix cpu-throttle-increment regression in HMPEric Blake1-0/+1
Commit 69ef1f3 accidentally broke migrate_set_parameter's ability to set the cpu-throttle-increment to anything other than the default, because it forgot to parse the user's string into an integer. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration/rdma: Don't flag an error when we've been told about oneDr. David Alan Gilbert1-1/+5
If the other side tells us there's been an error and we fail the migration, we don't need to signal that failure to the other side because it already knew. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael R. Hines <michael@hinespot.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration: Make failed migration load set file errorDr. David Alan Gilbert1-7/+12
If an error occurs in a section load, set the file error flag so that the transport can get notified to do a cleanup. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael R. Hines <michael@hinespot.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration/rdma: Pass qemu_file errors across linkDr. David Alan Gilbert1-0/+3
If we fail for some reason (e.g. a mismatched RAMBlock) and it's set the qemu_file error flag, pass that error back to the peer so it can clean up rather than waiting for some higher level progress. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael R. Hines <michael@hinespot.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration: Report values for comparisonsDr. David Alan Gilbert1-0/+8
Report the values when a comparison fails; together with the previous patch that prints the device and field names this should give a good idea of why loading the migration failed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migration: report an error giving the failed fieldDr. David Alan Gilbert1-0/+2
When a field fails to load (typically due to a limit check, or a call to a get/put) report the device and field to give an indication of the cause. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20161013-1' into ↵Peter Maydell4-232/+202
staging ui: vnc cleanups, input-linux kbd fix. # gpg: Signature made Thu 13 Oct 2016 09:47:43 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-ui-20161013-1: input-linux: initialize key state ui: rename vnc_init_state to vnc_start_protocol ui: move some initialization out of vnc_init_state ui: remove bogus call to reset_keys() in vnc_init_state ui: remove bogus call to graphic_hw_update() in vnc_listen_io ui: refactor method for setting up VncDisplay auth types ui: rename misleading 'VncDisplay' variables ui: remove 'ws_tls' field from VncState ui: remove 'enabled' and 'ws_enabled' fields from VncState ui: remove misleading comment from vnc_init_state Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-13Revert "char: use a fixed idx for child muxed chr"Marc-André Lureau2-16/+7
That commit mis-used mux char: the frontend are multiplexed, not the backend. Fix the regression preventing "c-a c" to switch the focus. The following patches will fix the crash (when leaving or removing frontend) by tracking frontends with handler tags. This reverts commit 949055a2549afc4cde06b7972072c7288bb43722. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-13Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20161013' ↵Peter Maydell0-0/+0
into staging [stable] ppc-for-2.7 queue # gpg: Signature made Thu 13 Oct 2016 06:03:37 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.7-20161013: ppc: Check the availability of transactional memory hw/ppc/spapr: Fix the selection of the processor features hw/ppc/spapr: Move code related to "ibm,pa-features" to a separate function linux-headers: update Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-13input-linux: initialize key stateGerd Hoffmann1-2/+13
Query input device keys, initialize state accordingly, so the correct state is reflected in case any key is pressed at initialization time. There is a high chance for this to actually happen for the 'enter' key in case you start qemu with a terminal command (directly or virsh). When finding any pressed keys the input grab is delayed until all keys are lifted, to avoid confusing guest and host with appearently stuck keys. Reported-by: Muted Bytes <mutedbytes@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1476277384-30365-1-git-send-email-kraxel@redhat.com
2016-10-13ui: rename vnc_init_state to vnc_start_protocolDaniel P. Berrange3-4/+4
Rename the vnc_init_state method to reflect what its actual purpose is, to discourage future devs from using it for more general state initialization. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-10-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: move some initialization out of vnc_init_stateDaniel P. Berrange2-27/+23
Most of the fields in VncState are initialized in the vnc_connect() method, but some are done in vnc_init_state() instead. The purpose of having vnc_init_state() is to delay starting of the VNC wire protocol until after the websockets handshake has completed. As such the vnc_init_state() method only needs to be used for initialization that is dependant on the wire protocol running. This also lets us get rid of the initialized boolean flag from the VncState struct. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-9-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: remove bogus call to reset_keys() in vnc_init_stateDaniel P. Berrange1-1/+0
The vnc_init_state method calls reset_keys() to reset the modifier key state. This was originally added in commit 53762ddb277c690e486d0e17b10591774248c8cf Author: malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162> Date: Mon Dec 1 20:57:52 2008 +0000 Reset the key modifiers upon client connect This was valid at this time because there was only the single VncState object which was persistent across client connections and so needed resetting. The persistent data was later split off into VncDisplay and VncState was allocated at time of client connection: commit 753b4053311ff1437d99726970b1e7e6bf38249b Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162> Date: Mon Feb 16 14:59:30 2009 +0000 Support multiple VNC clients (Brian Kress) at which point the modifier state is always 0 due to use of g_new0. As such the reset_keys() call has been a no-op ever since. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-8-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: remove bogus call to graphic_hw_update() in vnc_listen_ioDaniel P. Berrange1-2/+0
Just before accepting a new client connection the vnc_listen_io method calls graphic_hw_update(). This is bogus because there is a call to this method already in vnc_state_init() and the client doesn't need up2date graphics console before reaching that. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-7-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: refactor method for setting up VncDisplay auth typesDaniel P. Berrange2-72/+53
There is a lot of repeated code in the auth type setup method, particularly around checking TLS credential types. Refactor it to reduce duplication and instead of having one method do both plain and websockets at once, call it separately for each. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-6-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: rename misleading 'VncDisplay' variablesDaniel P. Berrange1-136/+138
Normally code declares 'VncDisplay *vd' or 'VncState *vs' but there are a bunch of places which misleadingly declare 'VncDisplay *vs'. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-5-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: remove 'ws_tls' field from VncStateDaniel P. Berrange2-11/+1
The 'ws_tls' field in VncState is only ever representing the result of 'tlscreds != NULL' and is thus pointless. Replace use of 'ws_tls' with a direct check against 'tlscreds' Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-4-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: remove 'enabled' and 'ws_enabled' fields from VncStateDaniel P. Berrange2-15/+10
The 'ws_enabled' field is never used outside of the vnc_display_open method, so can be a local variable. The 'enabled' field is easily replaced by a check for whether 'lsock' is non-NULL. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-3-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ui: remove misleading comment from vnc_init_stateDaniel P. Berrange1-2/+0
The last line in vnc_init_state() says /* vs might be free()ed here */ This was added in commit 198a0039c5fca224a77e9761e2350dd9cc102ad0 Author: Gerd Hoffmann <kraxel@redhat.com> Date: Tue Jun 16 14:19:48 2009 +0200 vnc: rework VncState release workflow. because the preceeding 'vnc_update_client()' could indeed release the VncState instance. The call to vnc_update_client() was removed not long after though in commit 1fc624122fb923c7fc4c1f426541d953e7df13c9 Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Mon Aug 3 10:54:32 2009 +0100 single vnc server surface and so the comment has been wrong ever since Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475163940-26094-2-git-send-email-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-13ppc: Check the availability of transactional memoryThomas Huth3-1/+17
KVM-PR currently does not support transactional memory, and the implementation in TCG is just a fake. We should not announce TM support in the ibm,pa-features property when running on such a system, so disable it by default and only enable it if the KVM implementation supports it (i.e. recent versions of KVM-HV). These changes are based on some earlier work from Anton Blanchard (thanks!). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> (cherry picked from commit bac3bf287ab60e264b636f5f00c116a19b655762)
2016-10-13hw/ppc/spapr: Fix the selection of the processor featuresThomas Huth1-2/+9
The current code uses pa_features_206 for POWERPC_MMU_2_06, and for everything else, it uses pa_features_207. This is bad in some cases because there is also a "degraded" MMU version of ISA 2.06, called POWERPC_MMU_2_06a, which should of course use the flags for 2.06 instead. And there is also the possibility that the user runs the pseries machine with a POWER5+ or even 970 processor. In that case we certainly do not want to set the flags for 2.07, and rather simply skip the setting of the pa-features property instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> (cherry picked from commit 4cbec30d769a73853b60dc7f275e6e7da9ab5162)
2016-10-13hw/ppc/spapr: Move code related to "ibm,pa-features" to a separate functionThomas Huth1-30/+36
The function spapr_populate_cpu_dt() has become quite big already, and since we likely have to extend the pa-features property for every new processor generation, it is nicer if we put the related code into a separate function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> (cherry picked from commit 230bf719d3a3b144a4ffa441e5d6170ef0ad8999)
2016-10-13linux-headers: updateCornelia Huck12-7/+236
Update headers against 4.8-rc2. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-10-12Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20161012-1' into ↵Peter Maydell4-111/+142
staging various usb bugfixes some xhci cleanups # gpg: Signature made Wed 12 Oct 2016 13:38:27 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-usb-20161012-1: usb-redir: allocate buffers before waking up the host adapter usb: Fix incorrect default DMA offset. usb: fix serial generator xhci: make xhci_epid_to_usbep accept XHCIEPContext xhci: drop XHCITransfer->{slotid,epid} xhci: add & use xhci_kick_epctx() xhci: drop XHCITransfer->xhci xhci: use linked list for transfers xhci: drop unused comp_xfer field xhci: decouple EV_QUEUE from TD_QUEUE xhci: limit the number of link trbs we are willing to process Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-12usb-redir: allocate buffers before waking up the host adapterHans de Goede1-3/+7
Needed to make sure usb redirection is prepared to actually handle the callback from the usb host adapter. Without this interrupt endpoints don't work on xhci. Note: On ehci the usb_wakeup() call only schedules a BH for the actual work, which hides this bug because the allocation happens before ehci calls back even without this patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1476096313-7730-1-git-send-email-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-12usb: Fix incorrect default DMA offset.Vijay Kumar B1-1/+1
The default DMA offset is set to 3. When the property is not set by the consumer, the default causes DMA access to be shifted by 3 bytes. In PXA, this results in incorrect DMA access, leading to error notification in the USB controller driver. A better default would be 0, so that there is no offset, when the consumer does not specify one. Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Reviewed-by: Deepak S. <deepak@zilogic.com> Message-id: 1475060958-7760-1-git-send-email-vijaykumar@zilogic.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-12usb: fix serial generatorGerd Hoffmann1-6/+6
snprintf return value is *not* the number of chars written into the buffer, but the number of chars needed. So in case the buffer is too small you can go alloc a bigger one and try again. But that also means you can't simply use the return value for the next snprintf call without checking beforehand that things did actually fit. Problem is that usb_desc_create_serial didn't perform that check, so a loooong path string (can happen with deep pci-bridge nesting) results in the third snprintf call smashing the stack. Fix this by throwing out all the snpintf calls and use g_strdup_printf instead. https://bugzilla.redhat.com/show_bug.cgi?id=1381630 Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475659998-22045-1-git-send-email-kraxel@redhat.com
2016-10-12xhci: make xhci_epid_to_usbep accept XHCIEPContextGerd Hoffmann1-14/+15
All callsites have a XHCIEPContext pointer anyway, so we can just pass it directly instead of fiddeling with slotid and epid. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1474965172-30321-9-git-send-email-kraxel@redhat.com
2016-10-12xhci: drop XHCITransfer->{slotid,epid}Gerd Hoffmann1-9/+7
We can use XHCITransfer->epctx->{slotid,epid} instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1474965172-30321-8-git-send-email-kraxel@redhat.com
2016-10-12xhci: add & use xhci_kick_epctx()Gerd Hoffmann1-17/+26
xhci_kick_epctx is a xhci_kick_ep variant which takes an XHCIEPContext as input instead of slotid and epid. So in case we have a XHCIEPContext at hand at the callsite we can just pass it directly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1474965172-30321-7-git-send-email-kraxel@redhat.com
2016-10-12xhci: drop XHCITransfer->xhciGerd Hoffmann1-13/+9
Use XHCITransfer->epctx->xhci instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1474965172-30321-6-git-send-email-kraxel@redhat.com
2016-10-12xhci: use linked list for transfersGerd Hoffmann1-54/+68
xhci has a fixed number of 24 (TD_QUEUE) XHCITransfer structs per endpoint, which turns out to be a problem for usb3 devices with 32 (or more) bulk streams. xhci re-checks the trb rings on every finished transfer to make sure it'll pick up any pending work. But that scheme breaks in case the first transfer of a ring can't be started because we ran out of XHCITransfer structs already. So remove static XHCITransfer array from XHCIEPContext. Use a linked list instead, and allocate/free XHCITransfer as needed. Add helper functions to allocate & initialize and to cleanup & release XHCITransfer structs. That also simplifies trb management, we never have to realloc XHCITransfer->trbs because we don't reuse XHCITransfer structs any more. New dynamic limit for in-flight xhci transfers per endpoint is number-of-streams + 16. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1474965172-30321-5-git-send-email-kraxel@redhat.com
2016-10-12xhci: drop unused comp_xfer fieldGerd Hoffmann1-1/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1474965172-30321-4-git-send-email-kraxel@redhat.com
2016-10-12xhci: decouple EV_QUEUE from TD_QUEUEGerd Hoffmann1-1/+1
EV_QUEUE must not change because an array of that size is part of live migration data. Hard-code current value there, so we can touch TD_QUEUE without breaking live migration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1474965172-30321-3-git-send-email-kraxel@redhat.com
2016-10-12xhci: limit the number of link trbs we are willing to processGerd Hoffmann1-0/+10
Needed to avoid we run in circles forever in case the guest builds an endless loop with link trbs. Reported-by: Li Qiang <liqiang6-s@360.cn> Tested-by: P J P <ppandit@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1476096382-7981-1-git-send-email-kraxel@redhat.com
2016-10-12Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell51-461/+504
into staging # gpg: Signature made Wed 12 Oct 2016 09:43:03 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: Add missing execution mode of guest events trace: introduce a formal group name for trace events trace: pass trace-events to tracetool as a positional param trace: push reading of events up a level to tracetool main trace: rename _read_events to read_events trace: get rid of generated-events.h/generated-events.c trace: dynamically allocate event IDs at runtime trace: dynamically allocate trace_dstate in CPUState trace: provide mechanism for registering trace events trace: don't abort qemu if ftrace can't be initialized trace: emit name <-> ID mapping in simpletrace header trace: remove the TraceEventID and TraceEventVCPUID enums trace: give each trace event a named TraceEvent struct trace: break circular dependency in event-internal.h trace: remove duplicate control.h includes in generated-tracers.h trace: remove global 'uint16 dstate[]' array trace: remove some now unused functions trace: convert code to use event iterators trace: add trace event iterator APIs trace: move colo trace events to net/ sub-directory Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-12trace: Add missing execution mode of guest eventsLluís Vilanova1-0/+2
Add missing execution mode documentation for the 'guest_cpu_enter' and 'guest_cpu_reset' events. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147566900921.7708.656450813307396468.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: introduce a formal group name for trace eventsDaniel P. Berrange21-55/+73
The declarations in the generated-tracers.h file are assuming there's only ever going to be one instance of this header, as they are not namespaced. When we have one header per event group, if a single source file needs to include multiple sets of trace events, the symbols will all clash. This change thus introduces a '--group NAME' arg to the 'tracetool' program. This will cause all the symbols in the generated header files to be given a unique namespace. If no group is given, the group name 'common' is used, which is suitable for the current usage where there is only one global trace-events file used for code generation. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 1475588159-30598-21-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: pass trace-events to tracetool as a positional paramDaniel P. Berrange3-13/+16
Instead of reading the contents of 'trace-events' from stdin, accept the filename as a positional parameter. This also allows for reading from multiple files, though this facility is not used at this time. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-20-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: push reading of events up a level to tracetool mainDaniel P. Berrange2-6/+6
Move the reading of events out of the 'tracetool.generate' method and into tracetool.main, so that the latter is not tied to generating from a single source of events. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-19-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: rename _read_events to read_eventsDaniel P. Berrange2-5/+15
The _read_events method is used by callers outside of its module, so should be a public method, not private. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-18-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: get rid of generated-events.h/generated-events.cDaniel P. Berrange10-150/+70
Currently the generated-events.[ch] files contain the event dstates, constants and TraceEvent structs, while the generated-tracers.[ch] files contain the actual trace probe logic. With the removal of usage of the event enums from the API there is no longer any compelling reason for the separation between these files. The generated-events.h content is only ever needed from the generated-tracers.[ch] files. The enums/constants/structs from generated-events.[ch] are thus moved into the generated-tracers.[ch], so that there is one less file to be generated. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: dynamically allocate event IDs at runtimeDaniel P. Berrange3-13/+12
Instead of having the code generator assign event IDs and event VCPU IDs, assign them when the events are registered at runtime. This will allow code to be generated from individual trace-events without having to figure out globally unique numbering at build time. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-16-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: dynamically allocate trace_dstate in CPUStateDaniel P. Berrange4-5/+23
The CPUState struct has a bitmap tracking which VCPU events are currently active. This is indexed based on the event ID values, and sized according the maximum TraceEventVCPUID enum value. When we start dynamically assigning IDs at runtime, we can't statically declare a bitmap without making an assumption about the max event count. This problem can be solved by dynamically allocating the per-CPU dstate bitmap. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: provide mechanism for registering trace eventsDaniel P. Berrange11-3/+42
Remove the notion of there being a single global array of trace events, by introducing a method for registering groups of events. The module_call_init() needs to be invoked at the start of any program that wants to make use of the trace support. Currently this covers system emulators qemu-nbd, qemu-img and qemu-io. [Squashed the following fix from Daniel P. Berrange <berrange@redhat.com>: linux-user/bsd-user: initialize trace events subsystem The bsd-user/linux-user programs make use of the CPU emulation code and this now requires that the trace events subsystem is enabled, otherwise it'll crash trying to allocate an empty trace events bitmap for the CPU object. --Stefan] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: don't abort qemu if ftrace can't be initializedDaniel P. Berrange1-0/+6
If the ftrace backend is compiled into QEMU, any attempt to start QEMU while non-root will fail due to the inability to open /sys/kernel/debug/tracing/tracing_on. Add a fallback into the code so that it connects up the trace_marker_fd variable to /dev/null when getting EACCES on the 'trace_on' file. This allows QEMU to run, with ftrace turned into a no-op. [Fixed s/setting/getting/ and s/EACCESS/EACCES/ errors pointed out by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-13-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: emit name <-> ID mapping in simpletrace headerDaniel P. Berrange3-18/+89
Currently simpletrace assumes that events are given IDs starting from 0, based on the order in which they appear in the trace-events file, with no gaps. When the trace-events file is split up, this assumption becomes problematic. To deal with this, extend the simpletrace format so that it outputs a table of event name <-> ID mappings. That will allow QEMU to assign arbitrary IDs to events without breaking simpletrace parsing. The v3 simple trace format was FILE HEADER EVENT TRACE RECORD 0 EVENT TRACE RECORD 1 ... EVENT TRACE RECORD N The v4 simple trace format is now FILE HEADER EVENT MAPPING RECORD 0 EVENT MAPPING RECORD 1 ... EVENT MAPPING RECORD M EVENT TRACE RECORD RECORD 0 EVENT TRACE RECORD RECORD 1 ... EVENT TRACE RECORD N Although this shows all the mapping records being emitted upfront, this is not required by the format. While the main simpletrace backend will emit all mappings at startup, the systemtap simpletrace.stp script will emit the mappings at first use. eg FILE HEADER ... EVENT MAPPING RECORD 0 EVENT TRACE RECORD RECORD 0 EVENT TRACE RECORD RECORD 1 EVENT MAPPING RECORD 1 EVENT TRACE RECORD RECORD 2 ... EVENT TRACE RECORD N This is more space efficient given that most trace records only include a subset of events. In modifying the systemtap simpletrace code, a 'begin' probe was added to emit the trace event header, so you no longer need to add '--no-header' when running simpletrace.py for systemtap generated trace files. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-12-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: remove the TraceEventID and TraceEventVCPUID enumsDaniel P. Berrange11-65/+48
The TraceEventID and TraceEventVCPUID enums constants are no longer actually used for anything critical. The TRACE_EVENT_COUNT limit is used to determine the size of the TraceEvents array, and can be removed if we just NULL terminate the array instead. The TRACE_VCPU_EVENT_COUNT limit is used as a magic value for marking non-vCPU events, and also for declaring the size of the trace dstate mask in the CPUState struct. The former usage can be replaced by a dedicated constant TRACE_EVENT_VCPU_NONE, defined as (uint32_t)-1. For the latter usage, we can simply define a constant for the number of VCPUs, avoiding the need for the full enum. The only other usages of the enum values can be replaced by accesing the id/vcpu_id fields via the named TraceEvent structs. Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-11-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: give each trace event a named TraceEvent structDaniel P. Berrange5-11/+24
Currently we only expose a TraceEvent array, which must be indexed via the TraceEventID enum constants. This changes the generator to expose a named TraceEvent instance for each event, with an _EVENT suffix. Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-10-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: break circular dependency in event-internal.hDaniel P. Berrange1-5/+2
Currently event-internal.h includes generated-events.h, while generated-events.h includes event-internal.h causing a circular dependency. event-internal.h requires that the content of generated-events.h comes first, so that it can see the typedefs for TraceEventID and TraceEventVCPUID. Switching the TraceEvent struct to use uint32_t for the two ID fields removes the dependency on the typedef, allowing events-internal.h to be a self-contained header. This will then let the patch following this move event-internal.h to the top of generated-events.h, so we can expose TraceEvent struct variables in generated-events.h Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-9-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-12-29 08:46:36 +0000