aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-27hw/arm/boot: Fix MTE for EL3 direct kernel bootRichard Henderson1-0/+3
When booting an EL3 cpu with -kernel, we set up EL3 and then drop down to EL2. We need to enable access to v8.5-MemTag tag allocation at EL3 before doing so. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200724163853.504655-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27hw/arm/boot: Fix PAUTH for EL3 direct kernel bootRichard Henderson1-0/+3
When booting an EL3 cpu with -kernel, we set up EL3 and then drop down to EL2. We need to enable access to v8.3-PAuth keys and instructions at EL3 before doing so. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200724163853.504655-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27docs/system/arm/virt: Document 'mte' machine optionPeter Maydell1-0/+4
Commit 6a0b7505f1fd6769c which added documentation of the virt board crossed in the post with commit 6f4e1405b91da0d0 which added a new 'mte' machine option. Update the docs to include the new option. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-07-27target/arm: Always pass cacheattr in S1_ptw_translateRichard Henderson1-13/+6
When we changed the interface of get_phys_addr_lpae to require the cacheattr parameter, this spot was missed. The compiler is unable to detect the use of NULL vs the nonnull attribute here. Fixes: 7e98e21c098 Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Jan Kiszka <jan.kiskza@siemens.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27hw/misc/aspeed_sdmc: Fix incorrect memory sizePhilippe Mathieu-Daudé1-3/+4
The SDRAM Memory Controller has a 32-bit address bus, thus supports up to 4 GiB of DRAM. There is a signed to unsigned conversion error with the AST2600 maximum memory size: (uint64_t)(2048 << 20) = (uint64_t)(-2147483648) = 0xffffffff40000000 = 16 EiB - 2 GiB Fix by using the IEC suffixes which are usually safer, and add an assertion check to verify the memory is valid. This would have caught this bug: $ qemu-system-arm -M ast2600-evb qemu-system-arm: hw/misc/aspeed_sdmc.c:258: aspeed_sdmc_realize: Assertion `asc->max_ram_size < 4 * GiB' failed. Aborted (core dumped) Fixes: 1550d72679 ("aspeed/sdmc: Add AST2600 support") Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27ACPI: Assert that we don't run out of the preallocated memoryDongjiu Geng1-8/+4
data_length is a constant value, so we use assert instead of condition check. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Message-id: 20200622113146.33421-1-gengdongjiu@huawei.com Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200727' ↵Peter Maydell3-5/+4
into staging ppc patch queue 2020-07-27 Only one patch in this batch, but it fixes a fairly important regression, so we want it in qemu-5.1 # gpg: Signature made Mon 27 Jul 2020 06:51:57 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-5.1-20200727: pseries: fix kvmppc_set_fwnmi() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27pseries: fix kvmppc_set_fwnmi()Laurent Vivier3-5/+4
QEMU issues the ioctl(KVM_CAP_PPC_FWNMI) on the first vCPU. If the first vCPU is currently running, the vCPU mutex is held and the ioctl() cannot be done and waits until the mutex is released. This never happens and the VM is stuck. To avoid this deadlock, issue the ioctl on the same vCPU doing the RTAS call. The problem can be reproduced by booting a guest with several vCPUs (the probability to have the problem is (n - 1) / n, n = # of CPUs), and then by triggering a kernel crash with "echo c >/proc/sysrq-trigger". On the reboot, the kernel hangs after: ... [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x48000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0001c06f8f4f91a7 [ 0.000000] possible = 0x0003fbffcf5fb1a7 [ 0.000000] always = 0x00000003800081a1 [ 0.000000] cpu_user_features = 0xdc0065c2 0xaee00000 [ 0.000000] mmu_features = 0x3c006041 [ 0.000000] firmware_features = 0x00000085455a445f [ 0.000000] physical_start = 0x8000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] numa: NODE_DATA [mem 0x47f33c80-0x47f3ffff] Fixes: ec010c00665b ("ppc/spapr: KVM FWNMI should not be enabled until guest requests it") Cc: npiggin@gmail.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200724083533.281700-1-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-07-26Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200725' into stagingPeter Maydell3-6/+8
Fix some cputlb commentary Fix an hppa temporary leak Fix an i386 translation issue with loop insns # gpg: Signature made Sat 25 Jul 2020 17:03:59 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20200725: target/i386: Save cc_op before loop insns target/hppa: Free some temps in do_sub tcg: update comments for save_iotlb_data in cputlb Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-25Merge remote-tracking branch ↵Peter Maydell5-31/+59
'remotes/stefanberger/tags/pull-tpm-2020-07-24-1' into staging Merge tpm 2020/07/24 v1 # gpg: Signature made Sat 25 Jul 2020 01:13:22 BST # gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2020-07-24-1: tpm_emulator: Report an error if chardev is missing tpm: Improve help on TPM types when none are available Revert "tpm: Clean up error reporting in tpm_init_tpmdev()" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-25Merge remote-tracking branch ↵Peter Maydell4-3/+2
'remotes/kraxel/tags/fixes-20200724-pull-request' into staging bugfixes: virtio-input, usb-dwc2, pixman. # gpg: Signature made Fri 24 Jul 2020 17:42:43 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/fixes-20200724-pull-request: configure: Allow to build tools without pixman hw/input/virtio-input-hid.c: Don't undef CONFIG_CURSES hw: Only compile the usb-dwc2 controller if it is really needed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-25python/machine: Change default timeout to 30 secondsJohn Snow1-15/+15
3 seconds is too short for some tests running inside busy VMs. Build it out to a rather generous 30 seconds to find out conclusively if there are more severe problems in the merge/CI tests. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20200720160252.104139-2-jsnow@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-24target/i386: Save cc_op before loop insnsRichard Henderson1-0/+1
We forgot to update cc_op before these branch insns, which lead to losing track of the current eflags. Buglink: https://bugs.launchpad.net/qemu/+bug/1888165 Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200720154028.477457-1-richard.henderson@linaro.org>
2020-07-24target/hppa: Free some temps in do_subRichard Henderson1-0/+2
Two temps allocated but not freed. Do enough subtractions within a single TB and one can run out of temps entirely. Fixes: b2167459ae ("target-hppa: Implement basic arithmetic") Buglink: https://bugs.launchpad.net/qemu/+bug/1880287 Tested-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200720174039.517902-1-richard.henderson@linaro.org>
2020-07-24tcg: update comments for save_iotlb_data in cputlbAlex Bennée1-6/+5
I missed Emilio's review comments: Message-ID: <20200718205107.GA994221@sff> and the patch got merged. Correcting the comments now. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200720122358.26881-1-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-07-24tpm_emulator: Report an error if chardev is missingStefan Berger1-15/+23
This patch fixes the odd error reporting when trying to send a file descriptor to the TPM emulator if one has not passed a valid chardev. $ x86_64-softmmu/qemu-system-x86_64 -tpmdev emulator,id=tpm0 qemu-system-x86_64: -tpmdev emulator,id=tpm0: tpm-emulator: Failed to send CMD_SET_DATAFD: Success qemu-system-x86_64: -tpmdev emulator,id=tpm0: tpm-emulator: Could not cleanly shutdown the TPM: Success This is the new error report: $ x86_64-softmmu/qemu-system-x86_64 -tpmdev emulator,id=tpm0 qemu-system-x86_64: -tpmdev emulator,id=tpm0: tpm-emulator: parameter 'chardev' is missing This change does not hide the display of supported TPM types if a non-existent type is passed: $ x86_64-softmmu/qemu-system-x86_64 -tpmdev nonexistent,id=tpm0 qemu-system-x86_64: -tpmdev nonexistent,id=tpm0: Parameter 'type' expects a TPM backend type Supported TPM types (choose only one): passthrough Passthrough TPM backend driver emulator TPM emulator backend driver Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2020-07-24tpm: Improve help on TPM types when none are availableMarkus Armbruster1-4/+9
Help is a bit awkward when no TPM types are built into QEMU: $ qemu-system-x86_64 -tpmdev nonexistent,id=tpm0 qemu-system-x86_64: -tpmdev nonexistent,id=tpm0: Parameter 'type' expects a TPM backend type Supported TPM types (choose only one): Improve to qemu-system-x86_64: -tpmdev nonexistent,id=tpm0: Parameter 'type' expects a TPM backend type No TPM backend types are available Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2020-07-24Revert "tpm: Clean up error reporting in tpm_init_tpmdev()"Markus Armbruster4-12/+27
This reverts commit d10e05f15d5c3dd5e5cc59c5dfff460d89d48580. We report some -tpmdev failures, but then continue as if all was fine. Reproducer: $ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -chardev null,id=tpm0 -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: tpm chardev 'chrtpm' not found. qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: Could not cleanly shutdown the TPM: No such file or directory QEMU 5.0.90 monitor - type 'help' for more information (qemu) qemu-system-x86_64: -device tpm-tis,tpmdev=tpm0: Property 'tpm-tis.tpmdev' can't find value 'tpm0' $ echo $? 1 This is a regression caused by commit d10e05f15d "tpm: Clean up error reporting in tpm_init_tpmdev()". It's incomplete: be->create(opts) continues to use error_report(), and we don't set an error when it fails. I figure converting the create() methods to Error would make some sense, but I'm not sure it's worth the effort right now. Revert the broken commit instead, and add a comment to tpm_init_tpmdev(). Straightforward conflict in tpm.c resolved. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2020-07-24configure: Allow to build tools without pixmanThomas Huth1-1/+1
If pixman is not installed, it is currently not possible to run: .../configure --disable-system --enable-tools Seems like there was a dependency from one of the required source files to pixman in the past, but since commit 1ac0206b2ae1ffaeec56 ("qemu-timer.c: Trim list of included headers"), this dependency should be gone. Thus allow to compile the tools without pixman now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20200723141123.14765-1-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-07-24Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-24' ↵Peter Maydell5-9/+31
into staging Error reporting patches patches for 2020-07-24 # gpg: Signature made Fri 24 Jul 2020 14:03:44 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2020-07-24: qapi/error: Check format string argument in error_*prepend() sd/milkymist-memcard: Fix format string error: Strip trailing '\n' from error string arguments (again) coccinelle/err-bad-newline: Fix for Python 3, and add patterns Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-24hw/input/virtio-input-hid.c: Don't undef CONFIG_CURSESPeter Maydell1-1/+0
virtio-input-hid.c undefines CONFIG_CURSES before including ui/console.h. However since commits e2f82e924d057935 and b0766612d16da18 that header does not have behaviour dependent on CONFIG_CURSES. Remove the now-unneeded undef. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200723192457.28136-1-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-07-24hw: Only compile the usb-dwc2 controller if it is really neededThomas Huth2-1/+1
The USB_DWC2 switch is currently "default y", so it is included in all qemu-system-* builds, even if it is not needed. Even worse, it does a "select USB", so USB devices are now showing up as available on targets that do not support USB at all. This sysbus device should only be included by the boards that need it, i.e. by the Raspi machines. Fixes: 153ef1662c ("dwc-hsotg (dwc2) USB host controller emulation") Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200722154719.10130-1-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-07-24qapi/error: Check format string argument in error_*prepend()Philippe Mathieu-Daudé1-2/+4
error_propagate_prepend() "behaves like error_prepend()", and error_prepend() uses "formatting @fmt, ... like printf()". error_prepend() checks its format string argument, but error_propagate_prepend() does not. Fix by addint the format attribute to error_propagate_prepend() and error_vprepend(). This would have caught the bug fixed in the previous commit. Missed in commit 4b5766488f "error: Fix use of error_prepend() with &error_fatal, &error_abort". Inspired-by: Stefan Weil <sw@weilnetz.de> Suggested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200723171205.14949-1-philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-07-24sd/milkymist-memcard: Fix format stringStefan Weil1-1/+1
Fixes: b98e8d1230ff7023bb34ddeb7194424dfcbaf789 Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20200722204054.1400555-1-sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-07-24error: Strip trailing '\n' from error string arguments (again)Markus Armbruster2-4/+4
Tracked down with scripts/coccinelle/err-bad-newline.cocci. Cc: Peter Xu <peterx@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200722084048.1726105-3-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Xu <peterx@redhat.com>
2020-07-24coccinelle/err-bad-newline: Fix for Python 3, and add patternsMarkus Armbruster1-2/+22
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200722084048.1726105-2-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-07-24Merge remote-tracking branch ↵Peter Maydell1-5/+11
'remotes/ehabkost/tags/x86-next-for-5.1-pull-request' into staging x86 bug fix for -rc2 A fix from Vitaly Kuznetsov for a CPU reset bug reported by Jan Kiszka. # gpg: Signature made Thu 23 Jul 2020 20:10:40 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-next-for-5.1-pull-request: KVM: fix CPU reset wrt HF2_GIF_MASK Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-23KVM: fix CPU reset wrt HF2_GIF_MASKVitaly Kuznetsov1-5/+11
HF2_GIF_MASK is set in env->hflags2 unconditionally on CPU reset (see x86_cpu_reset()) but when calling KVM_SET_NESTED_STATE, KVM_STATE_NESTED_GIF_SET is only valid for nSVM as e.g. nVMX code looks like if (kvm_state->hdr.vmx.vmxon_pa == -1ull) { if (kvm_state->flags & ~KVM_STATE_NESTED_EVMCS) return -EINVAL; } Also, when adjusting the environment after KVM_GET_NESTED_STATE we need not reset HF2_GIF_MASK on VMX as e.g. x86_cpu_pending_interrupt() expects it to be set. Alternatively, we could've made env->hflags2 SVM-only. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Fixes: b16c0e20c742 ("KVM: add support for AMD nested live migration") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200723142701.2521161-1-vkuznets@redhat.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-07-23Merge remote-tracking branch ↵Peter Maydell5-6/+27
'remotes/alistair/tags/pull-riscv-to-apply-20200722-1' into staging This PR contains a few RISC-V fixes. The main fix is the correction of the goldfish RTC time. On top of that some small fixes to the recently added vector extensions have been added (including an assert that fixed a coverity report). There is a change in the SiFive E debug memory size to match hardware. Finally there is a fix for PMP accesses. # gpg: Signature made Wed 22 Jul 2020 17:43:59 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200722-1: target/riscv: Fix the range of pmpcfg of CSR funcion table hw/riscv: sifive_e: Correct debug block size target/riscv: fix vector index load/store constraints target/riscv: Quiet Coverity complains about vamo* goldfish_rtc: Fix non-atomic read behaviour of TIME_LOW/TIME_HIGH Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-23Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell13-73/+127
acpi,virtio,pc: bugfixes Fix bug in ACPI which were tripping up guests. Fix a use-after-free with hotplug of virtio devices. Block ability to create legacy devices which shouldn't have been there in the first place. Fix migration error handling with balloon. Drop some dead code in virtio. vtd emulation fixup. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 22 Jul 2020 13:07:26 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: virtio-pci: Changed vdev to proxy for VirtIO PCI BAR callbacks. intel_iommu: Use correct shift for 256 bits qi descriptor virtio: verify that legacy support is not accidentally on virtio: list legacy-capable devices virtio-balloon: Replace free page hinting references to 'report' with 'hint' virtio-balloon: Add locking to prevent possible race when starting hinting virtio-balloon: Prevent guest from starting a report when we didn't request one virtio: Drop broken and superfluous object_property_set_link() acpi: accept byte and word access to core ACPI registers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-23Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-20200721' into ↵Peter Maydell5-3/+31
staging AVR patches Fixes a memory leak reported by Coverity (CID 1430449). CI jobs result: . https://gitlab.com/philmd/qemu/-/pipelines/168722631 # gpg: Signature made Tue 21 Jul 2020 19:00:03 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/avr-20200721: hw/avr/boot: Fix memory leak in avr_load_firmware() qemu-common: Document qemu_find_file() qemu/osdep: Reword qemu_get_exec_dir() documentation qemu/osdep: Document os_find_datadir() return value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-22target/riscv: Fix the range of pmpcfg of CSR funcion tableZong Li1-1/+1
The range of Physical Memory Protection should be from CSR_PMPCFG0 to CSR_PMPCFG3, not to CSR_PMPADDR9. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-Id: <eae49e9252c9596e4f3bdb471772f79235141a87.1595335112.git.zong.li@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-22hw/riscv: sifive_e: Correct debug block sizeBin Meng1-1/+1
Currently the debug region size is set to 0x100, but according to FE310-G000 and FE310-G002 manuals: FE310-G000: 0x100 - 0xFFF FE310-G002: 0x0 - 0xFFF Change the size to 0x1000 that applies to both. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1594891856-15474-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-22target/riscv: fix vector index load/store constraintsLIU Zhiwei1-1/+9
Although not explicitly specified that the the destination vector register groups cannot overlap the source vector register group, it is still necessary. And this constraint has been added to the v0.8 spec. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200721133742.2298-2-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-22target/riscv: Quiet Coverity complains about vamo*LIU Zhiwei1-0/+1
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200721133742.2298-1-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-22goldfish_rtc: Fix non-atomic read behaviour of TIME_LOW/TIME_HIGHJessica Clarke2-3/+15
The specification says: 0x00 TIME_LOW R: Get current time, then return low-order 32-bits. 0x04 TIME_HIGH R: Return high 32-bits from previous TIME_LOW read. ... To read the value, the kernel must perform an IO_READ(TIME_LOW), which returns an unsigned 32-bit value, before an IO_READ(TIME_HIGH), which returns a signed 32-bit value, corresponding to the higher half of the full value. However, we were just returning the current time for both. If the guest is unlucky enough to read TIME_LOW and TIME_HIGH either side of an overflow of the lower half, it will see time be in the future, before jumping backwards on the next read, and Linux currently relies on the atomicity guaranteed by the spec so is affected by this. Fix this violation of the spec by caching the correct value for TIME_HIGH whenever TIME_LOW is read, and returning that value for any TIME_HIGH read. Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200718004934.83174-1-jrtc27@jrtc27.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-22virtio-pci: Changed vdev to proxy for VirtIO PCI BAR callbacks.Andrew Melnychenko1-10/+24
There is an issue when callback may be called with invalid vdev. It happens on unplug when vdev already deleted and VirtIOPciProxy is not. So now, callbacks accept proxy device, and vdev retrieved from it. Technically memio callbacks should be removed during the flatview update, but memoryregions remain til PCI device(and it's address space) completely deleted. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1716352 Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Message-Id: <20200706112123.971087-1-andrew@daynix.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22intel_iommu: Use correct shift for 256 bits qi descriptorLiu Yi L2-2/+8
In chapter 10.4.23 of VT-d spec 3.0, Descriptor Width bit was introduced in VTD_IQA_REG. Software could set this bit to tell VT-d the QI descriptor from software would be 256 bits. Accordingly, the VTD_IQH_QH_SHIFT should be 5 when descriptor size is 256 bits. This patch adds the DW bit check when deciding the shift used to update VTD_IQH_REG. Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Message-Id: <1593850035-35483-1-git-send-email-yi.l.liu@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22virtio: verify that legacy support is not accidentally onCornelia Huck2-0/+10
If a virtio device does not have legacy support, make sure that it is actually off, and bail out if not. For virtio-pci, this means that any device without legacy support that has been specified to modern-only (or that has been forced to it) will work. For virtio-ccw, this duplicates the check that is currently done prior to realization for any device that explicitly specified no support for legacy. This catches devices that have not been fenced properly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200707105446.677966-3-cohuck@redhat.com> Cc: qemu-stable@nongnu.org Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22virtio: list legacy-capable devicesCornelia Huck2-0/+27
Several types of virtio devices had already been around before the virtio standard was specified. These devices support virtio in legacy (and transitional) mode. Devices that have been added in the virtio standard are considered non-transitional (i.e. with no support for legacy virtio). Provide a helper function so virtio transports can figure that out easily. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200707105446.677966-2-cohuck@redhat.com> Cc: qemu-stable@nongnu.org Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22virtio-balloon: Replace free page hinting references to 'report' with 'hint'Alexander Duyck2-48/+48
Recently a feature named Free Page Reporting was added to the virtio balloon. In order to avoid any confusion we should drop the use of the word 'report' when referring to Free Page Hinting. So what this patch does is go through and replace all instances of 'report' with 'hint" when we are referring to free page hinting. Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Message-Id: <20200720175128.21935.93927.stgit@localhost.localdomain> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22virtio-balloon: Add locking to prevent possible race when starting hintingAlexander Duyck1-0/+4
There is already locking in place when we are stopping free page hinting but there is not similar protections in place when we start. I can only assume this was overlooked as in most cases the page hinting should not be occurring when we are starting the hinting, however there is still a chance we could be processing hints by the time we get back around to restarting the hinting so we are better off making sure to protect the state with the mutex lock rather than just updating the value with no protections. Based on feedback from Peter Maydell this issue had also been spotted by Coverity: CID 1430269 Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Message-Id: <20200720175122.21935.78013.stgit@localhost.localdomain> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22virtio-balloon: Prevent guest from starting a report when we didn't request oneAlexander Duyck1-1/+2
Based on code review it appears possible for the driver to force the device out of a stopped state when hinting by repeating the last ID it was provided. Prevent this by only allowing a transition to the start state when we are in the requested state. This way the driver is only allowed to send one descriptor that will transition the device into the start state. All others will leave it in the stop state once it has finished. Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Message-Id: <20200720175115.21935.99563.stgit@localhost.localdomain> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22virtio: Drop broken and superfluous object_property_set_link()Markus Armbruster4-11/+0
virtio_crypto_pci_realize() and copies the value of vcrypto->vdev's property "cryptodev" to vcrypto's property: object_property_set_link(OBJECT(vrng), "rng", OBJECT(vrng->vdev.conf.rng), NULL); Since it does so only after realize, this always fails, but the error is ignored. It's actually superfluous: vcrypto's property is an alias of vcrypto->vdev's property, created by virtio_instance_init_common(). Drop the call. Same for virtio_ccw_crypto_realize(), virtio_rng_pci_realize(), virtio_ccw_rng_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200721121153.1128844-1-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22acpi: accept byte and word access to core ACPI registersMichael Tokarev1-3/+6
All ISA registers should be accessible as bytes, words or dwords (if wide enough). Fix the access constraints for acpi-pm-evt, acpi-pm-tmr & acpi-cnt registers. Fixes: 5d971f9e67 (memory: Revert "memory: accept mismatching sizes in memory_region_access_valid") Fixes: afafe4bbe0 (apci: switch cnt to memory api) Fixes: 77d58b1e47 (apci: switch timer to memory api) Fixes: b5a7c024d2 (apci: switch evt to memory api) Buglink: https://lore.kernel.org/xen-devel/20200630170913.123646-1-anthony.perard@citrix.com/T/ Buglink: https://bugs.debian.org/964793 BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=964247 BugLink: https://bugs.launchpad.net/bugs/1886318 Reported-By: Simon John <git@the-jedi.co.uk> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-Id: <20200720160627.15491-1-mjt@msgid.tls.msk.ru> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200721' ↵Peter Maydell3-13/+14
into staging fw_cfg patches Fixes the DEADCODE issue reported by Coverity (CID 1430396). CI jobs result: . https://gitlab.com/philmd/qemu/-/pipelines/169086301 # gpg: Signature made Tue 21 Jul 2020 18:52:46 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/fw_cfg-20200721: hw/nvram/fw_cfg: Let fw_cfg_add_from_generator() return boolean value hw/nvram/fw_cfg: Simplify fw_cfg_add_from_generator() error propagation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-22Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2020-07-21' ↵Peter Maydell1-1/+1
into staging Monitor patches for 2020-07-21 # gpg: Signature made Tue 21 Jul 2020 16:23:27 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2020-07-21: qdev: Fix device_add DRIVER,help to print to monitor Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-21Update version for v5.1.0-rc1 releasev5.1.0-rc1Peter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-21Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell4-2/+60
Block layer patches: - file-posix: Handle `EINVAL` fallocate return value - qemu-img convert -n: Keep qcow2 v2 target sparse # gpg: Signature made Tue 21 Jul 2020 16:45:28 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: iotests: Test sparseness for qemu-img convert -n qcow2: Implement v2 zero writes with discard if possible file-posix: Handle `EINVAL` fallocate return value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-21Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-07-21' into ↵Peter Maydell23-73/+55
staging QOM patches for 2020-07-21 # gpg: Signature made Tue 21 Jul 2020 16:40:27 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qom-2020-07-21: qom: Make info qom-tree sort children more efficiently qom: Document object_get_canonical_path() returns malloced string qom: Change object_get_canonical_path_component() not to malloc Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-01-19 11:38:32 +0000