aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-13Update version for v4.1.0-rc5 releasev4.1.0-rc5Peter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-13riscv: roms: Fix make rules for building sifive_u biosBin Meng1-1/+1
Currently the make rules are wrongly using qemu/virt opensbi image for sifive_u machine. Correct it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1564812484-20385-1-git-send-email-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-13Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190813' ↵Peter Maydell4-15/+50
into staging ppc patch queue 2019-08-13 (last minute qemu-4.1 fixes) Here's a very, very last minute pull request for qemu-4.1. This fixes two nasty bugs with the XIVE interrupt controller in "dual" mode (where the guest decides which interrupt controller it wants to use). One occurs when resetting the guest while I/O is active, and the other with migration of hotplugged CPUs. The timing here is very unfortunate. Alas, we only spotted these bugs very late, and I was sick last week, delaying analysis and fix even further. This series hasn't had nearly as much testing as I'd really like, but I'd still like to squeeze it into qemu-4.1 if possible, since definitely fixing two bad bugs seems like an acceptable tradeoff for the risk of introducing different bugs. # gpg: Signature made Tue 13 Aug 2019 07:56:42 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.1-20190813: spapr/xive: Fix migration of hot-plugged CPUs spapr: Reset CAS & IRQ subsystem after devices Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-13spapr/xive: Fix migration of hot-plugged CPUsCédric Le Goater3-3/+38
The migration sequence of a guest using the XIVE exploitation mode relies on the fact that the states of all devices are restored before the machine is. This is not true for hot-plug devices such as CPUs which state come after the machine. This breaks migration because the thread interrupt context registers are not correctly set. Fix migration of hotplugged CPUs by restoring their context in the 'post_load' handler of the XiveTCTX model. Fixes: 277dd3d7712a ("spapr/xive: add migration support for KVM") Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190813064853.29310-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-13spapr: Reset CAS & IRQ subsystem after devicesDavid Gibson1-12/+12
This fixes a nasty regression in qemu-4.1 for the 'pseries' machine, caused by the new "dual" interrupt controller model. Specifically, qemu can crash when used with KVM if a 'system_reset' is requested while there's active I/O in the guest. The problem is that in spapr_machine_reset() we: 1. Reset the CAS vector state spapr_ovec_cleanup(spapr->ov5_cas); 2. Reset all devices qemu_devices_reset() 3. Reset the irq subsystem spapr_irq_reset(); However (1) implicitly changes the interrupt delivery mode, because whether we're using XICS or XIVE depends on the CAS state. We don't properly initialize the new irq mode until (3) though - in particular setting up the KVM devices. During (2), we can temporarily drop the BQL allowing some irqs to be delivered which will go to an irq system that's not properly set up. Specifically, if the previous guest was in (KVM) XIVE mode, the CAS reset will put us back in XICS mode. kvm_kernel_irqchip() still returns true, because XIVE was using KVM, however XICs doesn't have its KVM components intialized and kernel_xics_fd == -1. When the irq is delivered it goes via ics_kvm_set_irq() which assert()s that kernel_xics_fd != -1. This change addresses the problem by delaying the CAS reset until after the devices reset. The device reset should quiesce all the devices so we won't get irqs delivered while we mess around with the IRQ. The CAS reset and irq re-initialize should also now be under the same BQL critical section so nothing else should be able to interrupt it either. We also move the spapr_irq_msi_reset() used in one of the legacy irq modes, since it logically makes sense at the same point as the spapr_irq_reset() (it's essentially an equivalent operation for older machine types). Since we don't need to switch between different interrupt controllers for those old machine types it shouldn't actually be broken in those cases though. Cc: Cédric Le Goater <clg@kaod.org> Fixes: b2e22477 "spapr: add a 'reset' method to the sPAPR IRQ backend" Fixes: 13db0cd9 "spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS" Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-12display/bochs: fix pcie supportGerd Hoffmann1-1/+6
Set QEMU_PCI_CAP_EXPRESS unconditionally in init(), then clear it in realize() in case the device is not connected to a PCIe bus. This makes sure the pci config space allocation is big enough, so accessing the PCIe extended config space doesn't overflow the pci config space buffer. PCI(e) config space is guest writable. Writes are limited by write mask (which probably is also filled with random stuff), so the guest can only flip enabled bits. But I suspect it still might be exploitable, so rather serious because it might be a host escape for the guest. On the other hand the device is probably not yet in widespread use. (For a QEMU version without this commit, a mitigation for the bug is available: use "-device bochs-display" as a conventional pci device only.) Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190812065221.20907-2-kraxel@redhat.com Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-06Update version for v4.1.0-rc4 releasev4.1.0-rc4Peter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-06compat: disable edid on virtio-gpu base deviceCornelia Huck1-1/+1
'edid' is a property of the virtio-gpu base device, so turning it off on virtio-gpu-pci is not enough (it misses -ccw). Turn it off on the base device instead. Fixes: 0a71966253c8 ("edid: flip the default to enabled") Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190806115819.16026-1-cohuck@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-06Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-08-06' ↵Peter Maydell9-14/+150
into staging Block patches for 4.1.0-rc4: - Fix the backup block job when using copy offloading - Fix the mirror block job when using the write-blocking copy mode - Fix incremental backups after the image has been grown with the respective bitmap attached to it # gpg: Signature made Tue 06 Aug 2019 12:57:07 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-08-06: block/backup: disable copy_range for compressed backup iotests: Test unaligned blocking mirror write mirror: Only mirror granularity-aligned chunks iotests: Test incremental backup after truncation util/hbitmap: update orig_size on truncate iotests: Test backup job with two guest writes backup: Copy only dirty areas Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-06block/backup: disable copy_range for compressed backupVladimir Sementsov-Ogievskiy1-1/+1
Enabled by default copy_range ignores compress option. It's definitely unexpected for user. It's broken since introduction of copy_range usage in backup in 9ded4a011496. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190730163251.755248-3-vsementsov@virtuozzo.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-06iotests: Test unaligned blocking mirror writeMax Reitz2-2/+27
Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190805113526.20319-1-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-06mirror: Only mirror granularity-aligned chunksMax Reitz1-0/+29
In write-blocking mode, all writes to the top node directly go to the target. We must only mirror chunks of data that are aligned to the job's granularity, because that is how the dirty bitmap works. Therefore, the request alignment for writes must be the job's granularity (in write-blocking mode). Unfortunately, this forces all reads and writes to have the same granularity (we only need this alignment for writes to the target, not the source), but that is something to be fixed another time. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190805153308.2657-1-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Fixes: d06107ade0ce74dc39739bac80de84b51ec18546 Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-06iotests: Test incremental backup after truncationMax Reitz2-6/+36
Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190805152840.32190-1-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-06util/hbitmap: update orig_size on truncateVladimir Sementsov-Ogievskiy1-1/+5
Without this, hbitmap_next_zero and hbitmap_next_dirty_area are broken after truncate. So, orig_size is broken since it's introduction in 76d570dc495c56bb. Fixes: 76d570dc495c56bb Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190805120120.23585-1-vsementsov@virtuozzo.com Reviewed-by: Max Reitz <mreitz@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-06iotests: Test backup job with two guest writesMax Reitz2-2/+41
Perform two guest writes to not yet backed up areas of an image, where the former touches an inner area of the latter. Before HEAD^, copy offloading broke this in two ways: (1) The target image differs from the reference image (what the source was when the backup started). (2) But you will not see that in the failing output, because the job offset is reported as being greater than the job length. This is because one cluster is copied twice, and thus accounted for twice, but of course the job length does not increase. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190801173900.23851-3-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-06backup: Copy only dirty areasMax Reitz1-2/+11
The backup job must only copy areas that the copy_bitmap reports as dirty. This is always the case when using traditional non-offloading backup, because it copies each cluster separately. When offloading the copy operation, we sometimes copy more than one cluster at a time, but we only check whether the first one is dirty. Therefore, whenever copy offloading is possible, the backup job currently produces wrong output when the guest writes to an area of which an inner part has already been backed up, because that inner part will be re-copied. Fixes: 9ded4a0114968e98b41494fc035ba14f84cdf700 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190801173900.23851-2-mreitz@redhat.com Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-05Merge remote-tracking branch 'remotes/philmd-gitlab/tags/edk2-next-20190803' ↵Peter Maydell1-1/+1
into staging A harmless build-sys patch that fixes a regression affecting Linux distributions packaging QEMU. # gpg: Signature made Sat 03 Aug 2019 09:24:15 BST # gpg: using RSA key E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/edk2-next-20190803: Makefile: remove DESTDIR from firmware file content Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-03Makefile: remove DESTDIR from firmware file contentOlaf Hering1-1/+1
The resulting firmware files should only contain the runtime path. Fixes commit 26ce90fde5c ("Makefile: install the edk2 firmware images and their descriptors") Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190530192812.17637-1-olaf@aepfle.de> Fixes: https://bugs.launchpad.net/qemu/+bug/1838703 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-02target/arm: Avoid bogus NSACR traps on M-profile without Security ExtensionPeter Maydell1-0/+8
In Arm v8.0 M-profile CPUs without the Security Extension and also in v7M CPUs, there is no NSACR register. However, the code we have to handle the FPU does not always check whether the ARM_FEATURE_M_SECURITY bit is set before testing whether env->v7m.nsacr permits access to the FPU. This means that for a CPU with an FPU but without the Security Extension we would always take a bogus fault when trying to stack the FPU registers on an exception entry. We could fix this by adding extra feature bit checks for all uses, but it is simpler to just make the internal value of nsacr 0xcff ("all non-secure accesses allowed"), since this is not guest visible when the Security Extension is not present. This allows us to continue to follow the Arm ARM pseudocode which takes a similar approach. (In particular, in the v8.1 Arm ARM the register is documented as reading as 0xcff in this configuration.) Fixes: https://bugs.launchpad.net/qemu/+bug/1838475 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20190801105742.20036-1-peter.maydell@linaro.org
2019-08-02Merge remote-tracking branch ↵Peter Maydell1-0/+0
'remotes/elmarco/tags/slirp-CVE-2019-14378-pull-request' into staging Slirp CVE-2019-14378 pull request # gpg: Signature made Fri 02 Aug 2019 12:17:24 BST # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/slirp-CVE-2019-14378-pull-request: slirp: update with CVE-2019-14378 fix Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-02slirp: update with CVE-2019-14378 fixMarc-André Lureau1-0/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-07-30Update version for v4.1.0-rc3 releasev4.1.0-rc3Peter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-30Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell3-1/+5
pci: bugfix A last minute fix to cross-version migration. Better late than never. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 30 Jul 2019 17:07:42 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: pcie_root_port: Disable ACS on older machines pcie_root_port: Allow ACS to be disabled Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-30pcie_root_port: Disable ACS on older machinesDr. David Alan Gilbert1-0/+1
ACS got added in 4.0 unconditionally, that broke older<->4.0 migration where there was a PCIe root port. Fix this by turning it off for 3.1 and older machines; note this fixes compatibility for older QEMUs but breaks compatibility with 4.0 for older machine types. machine type source qemu dest qemu 3.1 3.1 4.0 broken 3.1 3.1 4.1rc2 broken 3.1 3.1 4.1+this OK ++ 3.1 4.0 4.1rc2 OK 3.1 4.0 4.1+this broken -- 4.0 4.0 4.1rc2 OK 4.0 4.0 4.1+this OK So we gain and lose; the consensus seems to be treat this as a fix for older machine types. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190730093719.12958-3-dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-30pcie_root_port: Allow ACS to be disabledDr. David Alan Gilbert2-1/+4
ACS was added in 4.0 unconditionally, this breaks migration compatibility. Allow ACS to be disabled by adding a property that's checked by pcie_root_port. Unfortunately pcie-root-port doesn't have any instance data, so there's no where for that flag to live, so stuff it into PCIESlot. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190730093719.12958-2-dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-30target/arm: Deliver BKPT/BRK exceptions to correct exception levelPeter Maydell1-1/+15
Most Arm architectural debug exceptions (eg watchpoints) are ignored if the configured "debug exception level" is below the current exception level (so for example EL1 can't arrange to get debug exceptions for EL2 execution). Exceptions generated by the BRK or BPKT instructions are a special case -- they must always cause an exception, so if we're executing above the debug exception level then we must take them to the current exception level. This fixes a bug where executing BRK at EL2 could result in an exception being taken at EL1 (which is strictly forbidden by the architecture). Fixes: https://bugs.launchpad.net/qemu/+bug/1838277 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190730132522.27086-1-peter.maydell@linaro.org
2019-07-30Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell3-6/+15
Block layer patches: - fdc: Fix inserting read-only media in empty drive # gpg: Signature made Tue 30 Jul 2019 16:32:14 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: iotests/118: Test inserting a read-only medium fdc: Fix inserting read-only media in empty drive Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-30iotests/118: Test inserting a read-only mediumKevin Wolf2-3/+7
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2019-07-30fdc: Fix inserting read-only media in empty driveKevin Wolf1-3/+8
In order to insert a read-only medium (i.e. a read-only block node) to the BlockBackend of a floppy drive, we must not have taken write permissions on that BlockBackend, or the operation will fail with the error message "Block node is read-only". The device already takes care to remove all permissions when the medium is ejected, but the state isn't correct if the drive is initially empty: It uses blk_is_read_only() to check whether write permissions should be taken, but this function returns false for empty BlockBackends in the common case. Fix floppy_drive_realize() to avoid taking write permissions if the drive is empty. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2019-07-30Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-07-30' ↵Peter Maydell1-11/+11
into staging Block patch for 4.1.0-rc3: - Fix CID 1403771 in block/nvme.c # gpg: Signature made Tue 30 Jul 2019 13:51:52 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-07-30: nvme: Limit blkshift to 12 (for 4 kB blocks) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-30nvme: Limit blkshift to 12 (for 4 kB blocks)Max Reitz1-11/+11
Linux does not support blocks greater than 4 kB anyway, so we might as well limit blkshift to 12 and thus save us from some potential trouble. Reported-by: Peter Maydell <peter.maydell@linaro.org> Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190730114812.10493-1-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Coverity: CID 1403771 Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-30Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell4-19/+23
Block layer patches: - scsi-cd: Fix inserting read-only media in empty drive - block/copy-on-read: Fix permissions for inactive node - Test case fixes # gpg: Signature made Tue 30 Jul 2019 12:21:48 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: scsi-cd: Fix inserting read-only media in empty drive block/copy-on-read: Fix permissions for inactive node Fixes: add read-zeroes to 051.out tests/multiboot: Fix load address of test kernels Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-30scsi-cd: Fix inserting read-only media in empty driveKevin Wolf1-2/+8
scsi-disks decides whether it has a read-only device by looking at whether the BlockBackend specified as drive=... is read-only. In the case of an anonymous BlockBackend (with a node name specified in drive=...), this is the read-only flag of the attached node. In the case of an empty anonymous BlockBackend, it's always read-write because nothing prevented it from being read-write. This is a problem because scsi-cd would take write permissions on the anonymous BlockBackend of an empty drive created without a drive=... option. Using blockdev-insert-medium with a read-only node fails then with the error message "Block node is read-only". Fix scsi_realize() so that scsi-cd devices always take read-only permissions on their BlockBackend instead. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1733920 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2019-07-30block/copy-on-read: Fix permissions for inactive nodeKevin Wolf1-9/+7
The copy-on-read drive must not request the WRITE_UNCHANGED permission for its child if the node is inactive, otherwise starting a migration destination with -incoming will fail because the child cannot provide write access yet: qemu-system-x86_64: -blockdev copy-on-read,file=img,node-name=cor: Block node is read-only Earlier QEMU versions additionally ran into an abort() on the migration source side: bdrv_inactivate_recurse() failed to update permissions. This is silently ignored today because it was only supposed to loosen restrictions. This is the symptom that was originally reported here: https://bugzilla.redhat.com/show_bug.cgi?id=1733022 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2019-07-30Fixes: add read-zeroes to 051.outAndrey Shinkevich1-5/+5
The patch "iotests: Set read-zeroes on in null block driver for Valgrind" with the commit ID a6862418fec4072 needs the change in 051.out when compared against on the s390 system. Fixes: a6862418fec40727b392c86dc13d9ec980efcb15 Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-30tests/multiboot: Fix load address of test kernelsKevin Wolf1-3/+3
While older toolchains produced binaries where the physical load address of ELF segments was the same as the virtual address, newer versions seem to choose a different physical address if it isn't specified explicitly. The means that the test kernel doesn't use the right addresses to access e.g. format strings any more and the whole output disappears, causing all test cases to fail. Fix this by specifying the physical load address of sections explicitly. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-30Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell10-73/+36
virtio, pc: fixes A couple of last minute bugfixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 29 Jul 2019 22:13:22 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: pc-dimm: fix crash when invalid slot number is used Revert "hw: report invalid disable-legacy|modern usage for virtio-1-only devs" Revert "Revert "globals: Allow global properties to be optional"" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-29pc-dimm: fix crash when invalid slot number is usedIgor Mammedov1-0/+7
QEMU will crash with: Segmentation fault (core dumped) when negative slot number is used, ex: qemu-system-x86_64 -m 1G,maxmem=20G,slots=256 \ -object memory-backend-ram,id=mem1,size=1G \ -device pc-dimm,id=dimm1,memdev=mem1,slot=-2 fix it by checking that slot number is within valid range. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190723160859.27250-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Igor Mammedov &lt;<a href="mailto:imammedo@redhat.com" target="_blank">imammedo@redhat.com</a>&gt;<br></blockquote><div><br></div><div>Reviewed-by: Li Qiang &lt;<a href="mailto:liq3ea@gmail.com">liq3ea@gmail.com</a>&gt;<br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
2019-07-29Revert "hw: report invalid disable-legacy|modern usage for virtio-1-only devs"Dr. David Alan Gilbert7-73/+23
This reverts commit f2784eed306449c3d04a71a05ed6463b8289aedf since that accidentally removes the PCIe capabilities from virtio devices because virtio_pci_dc_realize is called before the new 'mode' flag is set. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190729162903.4489-3-dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-29Revert "Revert "globals: Allow global properties to be optional""Dr. David Alan Gilbert2-0/+6
This reverts commit 8fa70dbd8bb478d9483c1da3e9976a2d86b3f9a0. Because we're about to revert it's neighbour and thus uses an optional again. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190729162903.4489-2-dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-29Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' ↵Peter Maydell1-2/+1
into staging x86 queue for 4.1 * Rename and fix SnowRidge CPU model (Paul Lai) # gpg: Signature made Mon 29 Jul 2019 17:09:34 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-next-pull-request: i386: Fix Snowridge CPU model name and features Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-29i386: Fix Snowridge CPU model name and featuresPaul Lai1-2/+1
Changing the name to Snowridge from SnowRidge-Server. There is no client model of Snowridge, so "-Server" is unnecessary. Removing CPUID_EXT_VMX from Snowridge cpu feature list. Signed-off-by: Paul Lai <paul.c.lai@intel.com> Tested-by: Tao3 Xu <tao3.xu@intel.com> Message-Id: <20190716155808.25010-1-paul.c.lai@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-29Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell4-28/+50
staging # gpg: Signature made Mon 29 Jul 2019 09:30:48 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: net/colo-compare.c: Fix memory leak and code style issue. net: tap: replace snprintf with g_strdup_printf calls qemu-bridge-helper: move repeating code in parse_acl_file qemu-bridge-helper: restrict interface name to IFNAMSIZ e1000: don't raise interrupt in pre_save() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-29Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190728' ↵Peter Maydell2-11/+1
into staging ppc patch queue (for 4.1) 2019-07-28 Here's a pull request for qemu-4.1, which I hope will be the last from the ppc tree. This applies a couple of last minute fixes for the XIVE code. # gpg: Signature made Sun 28 Jul 2019 07:42:11 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.1-20190728: xics/kvm: Fix fallback to emulated XICS spapr/irq: Inform the user when falling back to emulated IC Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-29Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-rc3' ↵Peter Maydell1-4/+8
into staging RISC-V Patch for 4.1-rc3 This contains a single patch that fixes the warning introduced as part of the OpenSBI integration. # gpg: Signature made Sat 27 Jul 2019 00:04:19 BST # gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41 # gpg: issuer "palmer@dabbelt.com" # gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown] # gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41 * remotes/palmer/tags/riscv-for-master-4.1-rc3: riscv/boot: Fixup the RISC-V firmware warning Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-29net/colo-compare.c: Fix memory leak and code style issue.Zhang Chen1-7/+20
This patch to fix the origin "char *data" memory leak, code style issue and add necessary check here. Reported-by: Coverity (CID 1402785) Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-29net: tap: replace snprintf with g_strdup_printf callsPrasad J Pandit1-8/+11
When invoking qemu-bridge-helper in 'net_bridge_run_helper', instead of using fixed sized buffers, use dynamically allocated ones initialised and returned by g_strdup_printf(). Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-29qemu-bridge-helper: move repeating code in parse_acl_filePrasad J Pandit1-10/+9
Move repeating error handling sequence in parse_acl_file routine to an 'err' label. Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-29qemu-bridge-helper: restrict interface name to IFNAMSIZPrasad J Pandit1-0/+11
The network interface name in Linux is defined to be of size IFNAMSIZ(=16), including the terminating null('\0') byte. The same is applied to interface names read from 'bridge.conf' file to form ACL rules. If user supplied '--br=bridge' name is not restricted to the same length, it could lead to ACL bypass issue. Restrict interface name to IFNAMSIZ, including null byte. Reported-by: Riccardo Schirone <rschiron@redhat.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-29e1000: don't raise interrupt in pre_save()Jason Wang1-6/+2
We should not raise any interrupt after VM has been stopped but this is what e1000 currently did when mit timer is active in pre_save(). Fixing this by scheduling a timer in post_load() which can make sure the interrupt was raised when VM is running. Reported-and-tested-by: Longpeng <longpeng2@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
generated by cgit v1.1 at 2024-11-16 22:49:29 +0000