aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-25audio/jack: add JACK client audiodevGeoffrey McRae6-2/+746
This commit adds a new audiodev backend to allow QEMU to use JACK as both an audio sink and source. Signed-off-by: Geoffrey McRae <geoff@hostfission.com> Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-25hw/audio/gus: Use AUDIO_HOST_ENDIANNESS definition from 'audio/audio.h'Philippe Mathieu-Daudé1-7/+1
Use the generic AUDIO_HOST_ENDIANNESS definition instead of a custom one. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200505100750.27332-1-f4bug@amsat.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-25es1370: check total frame count against current framePrasad J Pandit1-2/+5
A guest user may set channel frame count via es1370_write() such that, in es1370_transfer_audio(), total frame count 'size' is lesser than the number of frames that are processed 'cnt'. int cnt = d->frame_cnt >> 16; int size = d->frame_cnt & 0xffff; if (size < cnt), it results in incorrect calculations leading to OOB access issue(s). Add check to avoid it. Reported-by: Ren Ding <rding@gatech.edu> Reported-by: Hanqing Zhao <hanqing@gatech.edu> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-id: 20200514200608.1744203-1-ppandit@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-22Merge remote-tracking branch ↵Peter Maydell2-37/+42
'remotes/philmd-gitlab/tags/pflash-next-20200522' into staging - Remove unused timer in CFI01 flash, - Clean up code documentation, - Silent a long-standing Coverity warning (2016-07-15). # gpg: Signature made Fri 22 May 2020 18:43:03 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/pflash-next-20200522: hw/block/pflash: Check return value of blk_pwrite() hw/block/pflash_cfi01: Rename 'reset_flash' label as 'mode_read_array' hw/block/pflash_cfi01: Document use of non-CFI compliant command '0x00' hw/block/pflash_cfi01: Removed an unused timer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-22hw/block/pflash: Check return value of blk_pwrite()Mansour Ahmadi2-2/+14
When updating the PFLASH file contents, we should check for a possible failure of blk_pwrite(). Similar to commit 3a688294e. Reported-by: Coverity (CID 1357678 CHECKED_RETURN) Signed-off-by: Mansour Ahmadi <mansourweb@gmail.com> Message-Id: <20200408003552.58095-1-mansourweb@gmail.com> [PMD: Add missing "qemu/error-report.h" include and TODO comment] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-22hw/block/pflash_cfi01: Rename 'reset_flash' label as 'mode_read_array'Philippe Mathieu-Daudé1-15/+15
Rename the 'reset_flash' as 'mode_read_array' to make explicit we do not reset the device, we simply set its internal state machine in the READ_ARRAY mode. We do not reset the status register error bits, as a device reset would do. Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190716221555.11145-5-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-22hw/block/pflash_cfi01: Document use of non-CFI compliant command '0x00'Philippe Mathieu-Daudé1-5/+13
The command 0x00 is used by this model since its origin (commit 05ee37ebf630). In this commit the command is described with a amusing '/* ??? */' comment, probably meaning 'FIXME'. switch (cmd) { case 0x00: /* ??? */ ... This comment survived 12 years because the 0x00 value is indeed not specified by the CFI open standard (as of this commit). The 'cmd' field is transfered during migration. To keep the migration feature working with older QEMU version, we have to take a lot of care with migrated field. We figured out it is too late to remove a non-specified value from this model (this would make migration review very complex). It is however not too late to improve the documentation. Add few comments to remember this is a special value related to QEMU, and we won't find information about it on the CFI spec. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190716221555.11145-3-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-22hw/block/pflash_cfi01: Removed an unused timerPhilippe Mathieu-Daudé1-15/+0
The 'CFI02' NOR flash was introduced in commit 29133e9a0fff, with timing modelled. One year later, the CFI01 model was introduced (commit 05ee37ebf630) based on the CFI02 model. As noted in the header, "It does not support timings". 12 years later, we never had to model the device timings. Time to remove the unused timer, we can still add it back if required. Suggested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Laszlo Ersek <lersek@redhat.com> [Laszlo Ersek: Regression tested EDK2 OVMF IA32X64, ArmVirtQemu Aarch64 https://lists.gnu.org/archive/html/qemu-devel/2019-07/msg04373.html] Message-Id: <20190716221555.11145-2-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-22Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-20200521' ↵Peter Maydell4-0/+0
into staging qemu-openbios queue # gpg: Signature made Thu 21 May 2020 21:02:44 BST # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-openbios-20200521: Update OpenBIOS images to 4704d9eb built from submodule. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Merge remote-tracking branch ↵Peter Maydell37-292/+855
'remotes/pmaydell/tags/pull-target-arm-20200521-1' into staging target-arm queue: * tests/acceptance: Add a test for the canon-a1100 machine * docs/system: Document some of the Arm development boards * linux-user: make BKPT insn cause SIGTRAP, not be a syscall * target/arm: Remove unused GEN_NEON_INTEGER_OP macro * fsl-imx25, fsl-imx31, fsl-imx6, fsl-imx6ul, fsl-imx7: implement watchdog * hw/arm: Use qemu_log_mask() instead of hw_error() in various places * ARM: PL061: Introduce N_GPIOS * target/arm: Improve clear_vec_high() usage * target/arm: Allow user-mode code to write CPSR.E via MSR * linux-user/arm: Reset CPSR_E when entering a signal handler * linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 # gpg: Signature made Thu 21 May 2020 22:05:48 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200521-1: (29 commits) linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 linux-user/arm: Reset CPSR_E when entering a signal handler target/arm: Allow user-mode code to write CPSR.E via MSR target/arm: Use clear_vec_high more effectively target/arm: Use tcg_gen_gvec_mov for clear_vec_high ARM: PL061: Introduce N_GPIOS hw/timer/exynos4210_mct: Replace hw_error() by qemu_log_mask() hw/char/xilinx_uartlite: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask() hw/arm/integratorcp: Replace hw_error() by qemu_log_mask() hw/arm/fsl-imx7: Connect watchdog interrupts hw/arm/fsl-imx7: Instantiate various unimplemented devices hw/arm/fsl-imx6ul: Connect watchdog interrupts hw/arm/fsl-imx6: Connect watchdog interrupts hw/arm/fsl-imx31: Wire up watchdog hw/arm/fsl-imx25: Wire up watchdog hw/watchdog: Implement full i.MX watchdog support hw: Move i.MX watchdog driver to hw/watchdog target/arm: Remove unused GEN_NEON_INTEGER_OP macro linux-user/arm: Fix identification of syscall numbers ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32Peter Maydell1-6/+0
The Arm signal-handling code has some parts ifdeffed with a TARGET_CONFIG_CPU_32, which is always defined. This is a leftover from when this code's structure was based on the Linux kernel signal handling code, where it was intended to support 26-bit Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit 4da8b8208eded0ba21e3 in 2009. QEMU has never had 26-bit CPU support and is unlikely to ever add it; we certainly aren't going to support 26-bit Linux binaries via linux-user mode. The ifdef is just unhelpful noise, so remove it entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518143014.20689-1-peter.maydell@linaro.org
2020-05-21linux-user/arm: Reset CPSR_E when entering a signal handlerAmanieu d'Antras1-1/+7
This fixes signal handlers running with the wrong endianness if the interrupted code used SETEND to dynamically switch endianness. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200511131117.2486486-1-amanieu@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21target/arm: Allow user-mode code to write CPSR.E via MSRPeter Maydell2-1/+2
Using the MSR instruction to write to CPSR.E is deprecated, but it is required to work from any mode including unprivileged code. We were incorrectly forbidding usermode code from writing it because CPSR_USER did not include the CPSR_E bit. We use CPSR_USER in only three places: * as the mask of what to allow userspace MSR to write to CPSR * when deciding what bits a linux-user signal-return should be able to write from the sigcontext structure * in target_user_copy_regs() when we set up the initial registers for the linux-user process In the first two cases not being able to update CPSR.E is a bug, and in the third case it doesn't matter because CPSR.E is always 0 there. So we can fix both bugs by adding CPSR_E to CPSR_USER. Because the cpsr_write() in restore_sigcontext() is now changing a CPSR bit which is cached in hflags, we need to add an arm_rebuild_hflags() call there; the callsite in target_user_copy_regs() was already rebuilding hflags for other reasons. (The recommended way to change CPSR.E is to use the 'SETEND' instruction, which we do correctly allow from usermode code.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518142801.20503-1-peter.maydell@linaro.org
2020-05-21target/arm: Use clear_vec_high more effectivelyRichard Henderson1-21/+32
Do not explicitly store zero to the NEON high part when we can pass !is_q to clear_vec_high. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21target/arm: Use tcg_gen_gvec_mov for clear_vec_highRichard Henderson1-8/+2
The 8-byte store for the end a !is_q operation can be merged with the other stores. Use a no-op vector move to trigger the expand_clr portion of tcg_gen_gvec_mov. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21ARM: PL061: Introduce N_GPIOSGeert Uytterhoeven1-5/+7
Add a definition for the number of GPIO lines controlled by a PL061 instance, and use it instead of the hardcoded magic value 8. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200519085143.1376-1-geert+renesas@glider.be Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/timer/exynos4210_mct: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé1-7/+5
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Per the datasheet "Exynos 4412 RISC Microprocessor Rev 1.00" Chapter 25 "Multi Core Timer (MCT)" figure 1 and table 4, the default value on the APB bus is 0. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/char/xilinx_uartlite: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé1-2/+3
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé3-11/+18
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/integratorcp: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé1-8/+15
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx7: Connect watchdog interruptsGuenter Roeck2-0/+16
i.MX7 supports watchdog pretimeout interupts. With this commit, the watchdog in mcimx7d-sabre is fully operational, including pretimeout support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-9-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx7: Instantiate various unimplemented devicesGuenter Roeck2-0/+40
Instantiating PWM, CAN, CAAM, and OCOTP devices is necessary to avoid crashes when booting mainline Linux. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-8-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx6ul: Connect watchdog interruptsGuenter Roeck1-0/+10
With this commit, the watchdog on mcimx6ul-evk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-7-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx6: Connect watchdog interruptsGuenter Roeck1-0/+9
With this patch applied, the watchdog in the sabrelite emulation is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-6-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx31: Wire up watchdogGuenter Roeck3-0/+11
With this patch, the watchdog on i.MX31 emulations is fully operational. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-5-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx25: Wire up watchdogGuenter Roeck3-0/+16
With this commit, the watchdog on imx25-pdk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Update OpenBIOS images to 4704d9eb built from submodule.Mark Cave-Ayland4-0/+0
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-05-21hw/watchdog: Implement full i.MX watchdog supportGuenter Roeck2-14/+285
Implement full support for the watchdog in i.MX systems. Pretimeout support is optional because the watchdog hardware on i.MX31 does not support pretimeouts. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added Property array terminator entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw: Move i.MX watchdog driver to hw/watchdogGuenter Roeck10-5/+13
In preparation for a full implementation, move i.MX watchdog driver from hw/misc to hw/watchdog. While at it, add the watchdog files to MAINTAINERS. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21target/arm: Remove unused GEN_NEON_INTEGER_OP macroPeter Maydell1-23/+0
The GEN_NEON_INTEGER_OP macro is no longer used; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-21linux-user/arm: Fix identification of syscall numbersPeter Maydell1-66/+77
Our code to identify syscall numbers has some issues: * for Thumb mode, we never need the immediate value from the insn, but we always read it anyway * bad immediate values in the svc insn should cause a SIGILL, but we were abort()ing instead (via "goto error") We can fix both these things by refactoring the code that identifies the syscall number to more closely follow the kernel COMPAT_OABI code: * for Thumb it is always r7 * for Arm, if the immediate value is 0, then this is an EABI call with the syscall number in r7 * otherwise, we XOR the immediate value with 0x900000 (ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel), which converts valid syscall immediates into the desired value, and puts all invalid immediates in the range 0x100000 or above * then we can just let the existing "value too large, deliver SIGILL" case handle invalid numbers, and drop the 'goto error' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-5-peter.maydell@linaro.org
2020-05-21linux-user/arm: Handle invalid arm-specific syscalls correctlyPeter Maydell1-4/+26
The kernel has different handling for syscalls with invalid numbers that are in the "arm-specific" range 0x9f0000 and up: * 0x9f0000..0x9f07ff return -ENOSYS if not implemented * other out of range syscalls cause a SIGILL (see the kernel's arch/arm/kernel/traps.c:arm_syscall()) Implement this distinction. (Note that our code doesn't look quite like the kernel's, because we have removed the 0x900000 prefix by this point, whereas the kernel retains it in arm_syscall().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200420212206.12776-4-peter.maydell@linaro.org
2020-05-21linux-user/arm: Remove bogus SVC 0xf0002 handlingPeter Maydell1-3/+1
We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a NOP for QEMU). This is the wrong syscall number, because in the svc-immediate OABI syscall numbers are all offset by the ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002. (This is handled further down in the code with the other Arm-specific syscalls like NR_breakpoint.) When this code was initially added in commit 6f1f31c069b20611 in 2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2) so the value in the comparison took account of the extra 0x900000 offset. In commit fbb4a2e371f2fa7 in 2008, the ARM_SYSCALL_BASE was removed from the definition of ARM_NR_cacheflush and handling for this group of syscalls was added below the point where we subtract ARM_SYSCALL_BASE from the SVC immediate value. However that commit forgot to remove the now-obsolete earlier handling code. Remove the spurious ARM_NR_cacheflush condition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-3-peter.maydell@linaro.org
2020-05-21linux-user/arm: BKPT should cause SIGTRAP, not be a syscallPeter Maydell1-22/+8
In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly to EXCP_SWI, which means that if the guest executes a BKPT insn then QEMU will perform a syscall for it (which syscall depends on what value happens to be in r7...). The correct behaviour is that the guest process should take a SIGTRAP. This code has been like this (more or less) since commit 06c949e62a098f in 2006 which added BKPT in the first place. This is probably because at the time the same code path was used to handle both Linux syscalls and semihosting calls, and (on M profile) BKPT with a suitable magic number is used for semihosting calls. But these days we've moved handling of semihosting out to an entirely different codepath, so we can fix this bug by simply removing this handling of EXCP_BKPT and instead making it deliver a SIGTRAP like EXCP_DEBUG (as we do already on aarch64). Reported-by: <omerg681@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200420212206.12776-2-peter.maydell@linaro.org Fixes: https://bugs.launchpad.net/qemu/+bug/1873898 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21docs/system: Document Musca boardsPeter Maydell3-0/+33
Provide a minimal documentation of the Musca boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-6-peter.maydell@linaro.org
2020-05-21docs/system: Document the various MPS2 modelsPeter Maydell3-0/+31
Add basic documentation of the MPS2 board models. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-5-peter.maydell@linaro.org
2020-05-21docs/system: Document Arm Versatile Express boardsPeter Maydell3-0/+62
Provide a minimal documentation of the Versatile Express boards (vexpress-a9, vexpress-a15). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-4-peter.maydell@linaro.org
2020-05-21docs/system: Sort Arm board index into alphabetical orderPeter Maydell1-6/+11
Sort the board index into alphabetical order. (Note that we need to sort alphabetically by the title text of each file, which isn't the same ordering as sorting by the filename.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-3-peter.maydell@linaro.org
2020-05-21docs/system: Add 'Arm' to the Integrator/CP document titlePeter Maydell1-2/+2
Add 'Arm' to the Integrator/CP document title, for consistency with the titling of the other documentation of Arm devboard models (versatile, realview). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-2-peter.maydell@linaro.org
2020-05-21tests/acceptance: Add a test for the canon-a1100 machineThomas Huth2-0/+36
The canon-a1100 machine can be used with the Barebox firmware. The QEMU Advent Calendar 2018 features a pre-compiled image which we can use for testing. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200514190422.23645-1-f4bug@amsat.org Message-Id: <20200129090420.13954-1-thuth@redhat.com> [PMD: Rebased MAINTAINERS] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Merge remote-tracking branch ↵Peter Maydell6-10/+148
'remotes/berrange/tags/socket-next-pull-request' into staging Add support for UNIX sockets in the abstract namespace # gpg: Signature made Wed 20 May 2020 13:58:43 BST # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/socket-next-pull-request: qemu-options: updates for abstract unix sockets tests/util-sockets: add abstract unix socket cases qemu-sockets: add abstract UNIX domain socket support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Merge remote-tracking branch 'remotes/kraxel/tags/ui-20200520-pull-request' ↵Peter Maydell10-109/+264
into staging ui: windows keyboard fixes for gtk & sdl. ui: require GTK 3.22 or newer. # gpg: Signature made Wed 20 May 2020 09:41:48 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20200520-pull-request: ui: increase min required GTK version to 3.22.0 ui/gtk: use native keyboard scancodes on Windows ui/gtk: don't pass on win keys without keyboard grab ui/sdl2-input: use trace-events to debug key events ui/sdl2: start in full screen with grab enabled ui/sdl2: fix handling of AltGr key on Windows ui/gtk: remove unused variable ignore_keys ui/gtk: remove unused code ui/gkt: release all keys on grab-broken-event ui/gtk: fix handling of AltGr key on Windows ui/win32-kbd-hook: handle AltGr in a hook procedure Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-05-18-v3' ↵Peter Maydell14-329/+671
into staging bitmaps patches for 2020-05-18 - update bitmaps maintainers - add 'qemu-img bitmap' subcommand # gpg: Signature made Tue 19 May 2020 18:53:59 BST # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-bitmaps-2020-05-18-v3: qemu-img: Add bitmap sub-command blockdev: Split off basic bitmap operations for qemu-img blockdev: Promote several bitmap functions to non-static block: Make it easier to learn which BDS support bitmaps qemu-img: Fix stale comments on doc location docs: Sort sections on qemu-img subcommand parameters bitmaps: Update maintainer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-20qemu-options: updates for abstract unix socketsxiaoqiang zhao1-2/+6
add options documents changes for -chardev Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-20tests/util-sockets: add abstract unix socket casesxiaoqiang zhao1-0/+92
add cases to test tight and non-tight for abstract address type Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-20qemu-sockets: add abstract UNIX domain socket supportxiaoqiang zhao4-8/+50
unix_listen/connect_saddr now support abstract address types two aditional BOOL switches are introduced: tight: whether to set @addrlen to the minimal string length, or the maximum sun_path length. default is TRUE abstract: whether we use abstract address. default is FALSE cli example: -monitor unix:/tmp/unix.socket,abstract,tight=off OR -chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-19Merge remote-tracking branch 'remotes/rth/tags/pull-fpu-20200519' into stagingPeter Maydell22-1395/+547
Misc cleanups # gpg: Signature made Tue 19 May 2020 16:51:38 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-fpu-20200519: softfloat: Return bool from all classification predicates softfloat: Inline floatx80 compare specializations softfloat: Inline float128 compare specializations softfloat: Inline float64 compare specializations softfloat: Inline float32 compare specializations softfloat: Name compare relation enum softfloat: Name rounding mode enum softfloat: Change tininess_before_rounding to bool softfloat: Replace flag with bool softfloat: Use post test for floatN_mul Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-19qemu-img: Add bitmap sub-commandEric Blake3-0/+279
Include actions for --add, --remove, --clear, --enable, --disable, and --merge (note that --clear is a bit of fluff, because the same can be accomplished by removing a bitmap and then adding a new one in its place, but it matches what QMP commands exist). Listing is omitted, because it does not require a bitmap name and because it was already possible with 'qemu-img info'. A single command line can play one or more bitmap commands in sequence on the same bitmap name (although all added bitmaps share the same granularity, and and all merged bitmaps come from the same source file). Merge defaults to other bitmaps in the primary image, but can also be told to merge bitmaps from a distinct image. While this supports --image-opts for the file being modified, I did not think it worth the extra complexity to support that for the source file in a cross-file merges. Likewise, I chose to have --merge only take a single source rather than following the QMP support for multiple merges in one go (although you can still use more than one --merge in the command line); in part because qemu-img is offline and therefore atomicity is not an issue. Upcoming patches will add iotest coverage of these commands while also testing other features. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-19softfloat: Return bool from all classification predicatesRichard Henderson2-41/+41
This includes *_is_any_nan, *_is_neg, *_is_inf, etc. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Inline floatx80 compare specializationsRichard Henderson2-265/+41
Replace the floatx80 compare specializations with inline functions that call the standard floatx80_compare{,_quiet} functions. Use bool as the return type. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2024-09-05 09:16:48 +0000