aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-10-14acpi/piix: add macros for acpi property namesMichael S. Tsirkin2-3/+13
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14i386: define pc guest infoMichael S. Tsirkin2-0/+30
This defines a structure that will be used to fill in acpi tables where relevant properties are not yet available using QOM. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14loader: allow adding ROMs in done callbacksMichael S. Tsirkin3-1/+9
Don't abort if machine done callbacks add ROMs. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14i386: add bios linker/loaderMichael S. Tsirkin3-0/+186
This adds a dynamic bios linker/loader. This will be used by acpi table generation code to: - load each table in the appropriate memory segment - link tables to each other - fix up checksums after said linking Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14loader: use file path size from fw_cfg.hMichael S. Tsirkin2-2/+4
Avoid a bit of code duplication, make max file path constant reusable. Suggested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14acpi: ssdt pcihp: updat generated fileMichael S. Tsirkin1-4/+4
update generated file, not sure what changed Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14acpi: pre-compiled ASL filesMichael S. Tsirkin5-0/+12383
Add pre-compiled ASL files. Useful for systems that do not have IASL. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14acpi: add rules to compile ASL sourceMichael S. Tsirkin3-1/+34
Detect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files. Note: distros are known to silently update iasl so detect correct iasl flags for the installed version on each run as opposed to at configure time. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14i386: add ACPI table files from seabiosMichael S. Tsirkin12-0/+1848
This adds ASL code as well as scripts for processing it, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Will be used for runtime acpi table generation. Note: This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14q35: expose mmcfg size as a propertyMichael S. Tsirkin2-0/+15
Address is already exposed, expose size for symmetry. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14q35: use macro for MCFG property nameMichael S. Tsirkin2-1/+3
Useful to make it accessible through QOM. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pcie_host: expose address formatMichael S. Tsirkin2-21/+21
Callers pass in the address so it's helpful for them to be able to decode it. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pcie_host: expose UNMAPPED macroMichael S. Tsirkin2-3/+3
Make it possible to test unmapped status through QMP. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14loader: support for unmapped ROM blobsMichael S. Tsirkin3-7/+25
Support ROM blobs not mapped into guest memory: same as ROM files really but use caller's buffer. Support invoking callback on access and return memory pointer making it easier for caller to update memory if necessary. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14fw_cfg: interface to trigger callback on readMichael S. Tsirkin2-5/+32
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pci: fix up w64 size calculation helperMichael S. Tsirkin1-8/+12
BAR base was calculated incorrectly. Use existing pci_bar_address to get it right. Tested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14qom: add pointer to int property helpersMichael S. Tsirkin2-0/+81
Make it easy to add read-only helpers for simple integer properties in memory. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14qom: cleanup struct Error referencesMichael S. Tsirkin1-25/+25
now that a typedef for struct Error is available, use it in qom/object.h to match coding style rules. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14cleanup object.h: include error.h directlyIgor Mammedov1-1/+1
qapi/error.h is simple enough to be included in qom/object.h direcly and prepares qom/object.h to use Error typedef. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: removed irq field from PCIDeviceMarcel Apfelbaum2-5/+0
Instead of exposing the the irq field, pci wrappers to qemu_set_irq or qemu_irq_* can be used. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pcie: AER and hot-plug events must use device's interruptMarcel Apfelbaum3-22/+4
The fields hpev_intx and aer_intx were removed because both AER and hot-plug events must use device's interrupt. Assert/deassert interrupts using pci irq wrappers instead. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw: set interrupts using pci irq wrappersMarcel Apfelbaum26-43/+43
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/vfio: set interrupts using pci irq wrappersMarcel Apfelbaum1-5/+6
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. save INTX pin into the config register before calling pci_set_irq Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/vmxnet3: set interrupts using pci irq wrappersMarcel Apfelbaum1-2/+11
pci_set_irq uses PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An assert is used to ensure that intx received from the quest OS corresponds to PCI_INTERRUPT_PIN. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci-bridge: set PCI_INTERRUPT_PIN register before shpc initMarcel Apfelbaum1-1/+1
The PCI_INTERRUPT_PIN will be used by shpc init, so was moved before the call to shpc_init. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: add pci wrappers for allocating and asserting irqsMarcel Apfelbaum2-4/+45
Interrupt pin is selected and saved into PCI_INTERRUPT_PIN register during device initialization. Devices should not call directly qemu_set_irq and specify the INTx pin on each call. Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise, qemu_irq_lower and qemu_irq_pulse, setting the irq based on PCI_INTERRUPT_PIN. Added pci_allocate_irq wrapper to be used by devices that still need PCIDevice infrastructure to assert irqs. Renamed a static method which was named already pci_set_irq. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/core: Add interface to allocate and free a single IRQMarcel Apfelbaum2-0/+23
qemu_allocate_irq returns a single qemu_irq. The interface allows to specify an interrupt number. qemu_free_irq frees it. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: partially handle pci master abortMarcel Apfelbaum2-0/+27
A MemoryRegion with negative priority was created and it spans over all the pci address space. It "intercepts" the accesses to unassigned pci address space and will follow the pci spec: 1. returns -1 on read 2. does nothing on write Note: setting the RECEIVED MASTER ABORT bit in the STATUS register of the device that initiated the transaction will be implemented in another series Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14docs/memory: Explictly state that MemoryRegion priority is signedMarcel Apfelbaum1-0/+4
When memory regions overlap, priority can be used to specify which of them takes priority. By making the priority values signed rather than unsigned, we make it more convenient to implement a situation where one "background" region should appear only where no other region exists: rather than having to explicitly specify a high priority for all the other regions, we can let them take the default (zero) priority and specify a negative priority for the background region. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14memory: Change MemoryRegion priorities from unsigned to signedMarcel Apfelbaum4-7/+7
When memory regions overlap, priority can be used to specify which of them takes priority. By making the priority values signed rather than unsigned, we make it more convenient to implement a situation where one "background" region should appear only where no other region exists: rather than having to explicitly specify a high priority for all the other regions, we can let them take the default (zero) priority and specify a negative priority for the background region. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Factor out smbios_maybe_add_str()Markus Armbruster1-36/+25
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Make multiple -smbios type= accumulate sanelyMarkus Armbruster5-65/+94
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with value VAL to fw_cfg for each unique NAME. If NAME occurs multiple times, the last one's VAL is used (before the QemuOpts conversion, the first one was used). Multiple -smbios can add multiple fields with the same (T, NAME). SeaBIOS reads all of them from fw_cfg, but uses only the first field (T, NAME). The others are ignored. "First one wins, subsequent ones get ignored silently" isn't nice. We commonly let the last option win. Useful, because it lets you -readconfig first, then selectively override with command line options. Clean up -smbios to work the common way. Accumulate the settings, with later ones overwriting earlier ones. Put the result into fw_cfg (no more useless duplicates). Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by side effect. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Improve diagnostics for conflicting entriesMarkus Armbruster1-26/+17
We allow either tables or fields for the same type. Makes sense, because SeaBIOS uses fields only when no tables are present. We do this by searching the SMBIOS blob for a previously added table or field. Error messages look like this: qemu-system-x86_64: -smbios type=1,serial=42: SMBIOS type 1 table already defined, cannot add field User needs to know that "table" is defined by -smbios file=..., and "field" by -smbios type=... Instead of searching the blob, record additions of interest, and check that. Simpler, and makes better error messages possible: qemu-system-x86_64: -smbios file=smbios_type_1.bin: Can't mix file= and type= for same type qemu-system-x86_64: -smbios type=1,serial=42,serial=99: This is the conflicting setting Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Convert to QemuOptsMarkus Armbruster5-43/+179
So that it can be set in config file for -readconfig. This tightens parsing of -smbios, and makes it more consistent with other options: unknown parameters are rejected, numbers with trailing junk are rejected, when a parameter is given multiple times, last rather than first wins, ... MST: drop one chunk to fix build errors Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Normalize smbios_entry_add()'s error handling to exit(1)Markus Armbruster3-9/+7
It exits on all error conditions but one, where it returns -1. Normalize, and return void. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-22virtio-net: fix up HMP NIC info string on resetMichael S. Tsirkin1-0/+1
When mac is updated on reset, info string has stale data. Fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15pci: remove explicit check to 64K ioport sizeHervé Poussineau1-2/+4
This check is useless, as bigger addresses will be ignored when added to 'io' MemoryRegion, which has a size of 64K. However, some architectures don't use the 'io' MemoryRegion, like the alpha and versatile platforms. They create a PCI I/O region bigger than 64K, so let them handle PCI I/O BARs in the higher range. MST: reinstated work-around for BAR sizing. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15piix4: disable io on resetMichael S. Tsirkin1-0/+1
io base register at 0x40 is cleared on reset, but io is not disabled until some other event happens to call pm_io_space_update. Invoke pm_io_space_update directly to make this consistent. Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15piix: use 64 bit window programmed by guestMichael S. Tsirkin1-4/+10
Detect the 64 bit window programmed by firmware and configure properties accordingly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15q35: use 64 bit window programmed by guestMichael S. Tsirkin1-4/+10
Detect the 64 bit window programmed by firmware and configure properties accordingly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15pci: add helper to retrieve the 64-bit rangeMichael S. Tsirkin2-0/+51
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15range: add min/max operations on rangesMichael S. Tsirkin1-0/+18
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15range: add Range to typedefsMichael S. Tsirkin2-1/+2
will help simplify header dependencies. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15q35: make pci window address/size match guest cfgMichael S. Tsirkin1-0/+10
For Q35, MMCFG address and size are guest configurable. Update w32 property to make it behave accordingly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-11Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into ↵Anthony Liguori27-267/+1988
staging ARM queue: * aarch64 preparation patchset (excluding the defconfigs, so this doesn't actually enable the new targets yet) * minor bugfixes and cleanups * disable "-cpu any" in system emulation mode * fix ARMv7M stack alignment on reset # gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Alexander Graf (13) and others # Via Peter Maydell * pmaydell/tags/pull-target-arm-20130910: (28 commits) configure: Add handling code for AArch64 targets linux-user: Add AArch64 support linux-user: Allow targets to specify a minimum uname release linux-user: Add AArch64 termbits.h definitions linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64 linux-user: Make sure NWFPE code is 32 bit ARM only linux-user: Add signal handling for AArch64 linux-user: Fix up AArch64 syscall handlers linux-user: Add syscall number definitions for AArch64 linux-user: Add cpu loop for AArch64 linux-user: Don't treat AArch64 cpu names specially target-arm: Add AArch64 gdbstub support target-arm: Add AArch64 translation stub target-arm: Prepare translation for AArch64 code target-arm: Disable 32 bit CPUs in 64 bit linux-user builds target-arm: Add new AArch64CPUInfo base class and subclasses target-arm: Pass DisasContext* to gen_set_pc_im() target-arm: Fix target_ulong/uint32_t confusions target-arm: Export cpu_env target-arm: Extract the disas struct to a header file ... Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori1-1/+4
# By Cole Robinson # Via Luiz Capitulino * luiz/queue/qmp: qapi-types.py: Fix enum struct sizes on i686 Message-id: 1378822364-13887-1-git-send-email-lcapitulino@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11Merge remote-tracking branch 'spice/spice.v73' into stagingAnthony Liguori4-22/+28
# By Gerd Hoffmann (2) and Christophe Fergeau (1) # Via Gerd Hoffmann * spice/spice.v73: qxl: fix local renderer qxl: trace io port name spice-core: Use g_strdup_printf instead of snprintf Message-id: 1378807572-27902-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11Merge remote-tracking branch 'kraxel/usb.89' into stagingAnthony Liguori10-89/+95
# By Gerd Hoffmann (2) and Miroslav Rezanina (2) # Via Gerd Hoffmann * kraxel/usb.89: ehci: save device pointer in EHCIState Remove dev-bluetooth.c dependency from vl.c Preparation for usb-bt-dongle conditional build usb: sanity check setup_index+setup_len in post_load Message-id: 1378806073-25197-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11Merge remote-tracking branch 'mdroth/qga-pull-2013-9-9' into stagingAnthony Liguori28-30/+2257
# By Tomoki Sekiyama (10) and Paul Burton (1) # Via Michael Roth * mdroth/qga-pull-2013-9-9: QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command qemu-ga: Install Windows VSS provider on `qemu-ga -s install' qemu-ga: Call Windows VSS requester in fsfreeze command handler qemu-ga: Add Windows VSS provider and requester as DLL error: Add error_set_win32 and error_setg_win32 qemu-ga: Add configure options to specify path to Windows/VSS SDK Add a script to extract VSS SDK headers on POSIX system checkpatch.pl: Check .cpp files Add c++ keywords to QAPI helper script configure: Support configuring C++ compiler mips_malta: support up to 2GiB RAM Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11Merge remote-tracking branch 'sstabellini/xen-2013-09-09' into stagingAnthony Liguori5-8/+12
# By Anthony PERARD # Via Stefano Stabellini * sstabellini/xen-2013-09-09: pc_q35: Initialize Xen. pc: Initializing ram_memory under Xen. Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
generated by cgit v1.1 at 2024-12-29 04:16:36 +0000