aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-03-05target-ppc: Fix htab_mask calculationAneesh Kumar K.V8-14/+40
Correctly update the htab_mask using the return value of KVM_PPC_ALLOCATE_HTAB ioctl. Also we don't update sdr1 on GET_SREGS for HV. We check for external htab and if found true, we don't need to update sdr1 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [ fixed pte group offset computation in ppc_hash64_htab_lookup() that caused TCG to fail, Greg Kurz <gkurz@linux.vnet.ibm.com> ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Use Additional Temporary in stqcx CaseTom Musta1-3/+5
Per Alex Graf's suggestion, the recently added case to gen_conditional_store for stqcx should use an additional temporary when accessing the second doubleword. This avoids the mutation of the EA argument to the function, which is counter intuitive. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Fix Compiler Warnings Due to 64-Bit Constants Declared as ULTom Musta1-22/+22
This patch fixes 64 bit constants that were erroneously declared as "ul" instead of "ull". The preferred form "ULL" is used. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05PPC: sPAPR: Only use getpagesize() when we run with kvmAlexander Graf1-1/+12
We currently size the msi window trap page according to the host's page size so that we poke a working hole into a memory slot in case we overlap. However, this is only ever necessary with KVM active. Without KVM, we should rather try to be host platform agnostic and use a constant size: 4k. This fixes a build breakage on win32 hosts. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc/translate.c: Use ULL suffix for 64 bit constantsPeter Maydell1-2/+2
64 bit constants need the "ULL" suffix, not just "UL", because on 32 bit platforms 'long' is not large enough and this will cause a compiler warning. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05spapr-vlan: flush queue whenever can_receive can go from false to trueAlexey Kardashevskiy1-0/+2
When the guests adds buffers to receive queue, the network device should flush its queue of pending packets. This is done with qemu_flush_queued_packets. This adds a call to qemu_flush_queued_packets() which wakes up the main loop and let QEMU update the network device status which now is "can receive". The patch basically does the same thing as e8b4c68 does. Suggested-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Permute and Exclusive ORTom Musta3-1/+21
This patch adds the Vector Permuate and Exclusive OR (vpermxor) instruction introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector SHA Sigma InstructionsTom Musta3-0/+108
This patch adds the Vector SHA Sigma instructions introduced in Power ISA Version 2.07: - Vector SHA-512 Sigma Doubleword (vshasigmad) - Vector SHA-256 Sigma Word (vshasigmaw) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: AES InstructionsTom Musta3-0/+315
This patch adds the Vector AES instructions introduced in Power ISA Version 2.07: - Vector AES Cipher (vcipher) - Vector AES Cipher Last (vcipherlast) - Vector AES Inverse Cipher (vncipher) - Vector AES Inverse Cipher Last (vncipherlast) - Vector AES SubBytes (vsbox) Note that the implementation of vncipher deviates from the RTL in ISA V2.07. However it does match the verbal description in the third paragraph. The RTL will be fixed in ISA V2.07B. The implementation here has been tested against actual P8 hardware. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Binary Coded Decimal InstructionsTom Musta3-4/+245
This patch add the Binary Coded Decimal instructions bcdadd. and bcdsub. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Polynomial Multiply SumTom Musta3-0/+82
This patch adds the Vectory Polynomial Multiply Sum instructions introduced in Power ISA Version 2.07: - Vectory Polynomial Multiply Sum Byte (vpmsumb) - Vectory Polynomial Multiply Sum Halfword (vpmsumh) - Vectory Polynomial Multiply Sum Word (vpmsumw) - Vectory Polynomial Multiply Sum Doubleword (vpmsumd) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Gather Bits by BytesTom Musta3-0/+279
This patch adds the Vector Gather Bits by Bytes Doubleword (vgbbd) instruction which is introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Doubleword ComparesTom Musta3-7/+29
This patch adds the Vector Compare Doubleword instructions introduced by Power ISA Version 2.07: - Vector Compare Equal to Unsigned Doubleword (vcmpequd) - Vector Compare Greater Than Signed Doubleword (vcmpgtsd) - Vector Compare Greater Than Unsigned Doubleword (vcmpgtud) These instructions are encoded with bit 31 set to 1 and so are duals with vcmpeqfp, vcmpgtfp and vcmpbfp respectively. The helper macro for integer compares is enhanced to account for 64-bit operands. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: vbpermq InstructionTom Musta3-0/+34
This patch adds the Vector Bit Permute Quadword (vbpermq) instruction introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Quadword Addition and SubtracationTom Musta3-0/+211
This patch adds the Vector Quadword Addition and Subtraction instructions introduced in Power ISA Version 2.07: - Vector Add Unsigned Quadword Modulo (vadduqm) - Vector Add & Write Carry Unsigned Quadword (vaddcuq) - Vector Add Extended Unsigned Quadword (vaddeuqm) - Vector Add Extended & Write Carry Unsigned Quadword (vaddecuq) - Vector Subtract Unsigned Quadword Modulo (vsubuqm) - Vector Subtract & Write Carry Unsigned Quadword (vsubcuq) - Vector Subtract Extended Unsigned Quadword (vsubeuqm) - Vector Subtract Extended & Write Carry Unsigned Quadword (vsubecuq) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Doubleword Rotate and Shift InstructionsTom Musta3-0/+16
This patch adds the vector doublword rotate and shift instructions introduced in Power ISA Version 2.07: - Vector Rotate Left Doubleword instruction (vrld) - Vector Shift Left Doubleword (vsld) - Vector Shift Right Doubleword (vsrd) - Vector Shift Right Algegbraic Doubleword (vsrad) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Change Bit Masks to Support 64-bit Rotates and ShiftsTom Musta1-25/+15
Existing code in the VROTATE, VSL and VSR macros for the Altivec rotate and shift helpers uses a formula to compute a bit mask used to extract the rotate/shift amount from the VRB register. What is desired is: mask = (1 << (3 + log2(sizeof(element)))) - 1 but what is implemented is: mask = (1 << (3 + (sizeof(element)/2))) - 1 This produces correct answers when "element" is uint8_t, uint16_t or uint_32t. But it breaks down when element is uint64_t. This patch corrects the situation. Since the mask is known at compile time, the macros are changed to simply accept the mask as an argument. Subsequent patches in this series will add double-word variants of rotates and shifts and thus take advantage of this fix. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Merge InstructionsTom Musta1-0/+37
This patch adds the Vector Merge Even Word (vmrgew) and Vector Merge Odd Word (vmrgow) instructions introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Unpack Signed Word InstructionsTom Musta3-0/+8
This patch adds the Unpack Signed Word instructions introduced in Power ISA Version 2.07: - Vector Unpack High Signed Word (vupkusw) - Vector Unpack Low Signed Word (vupklsw) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Pack Doubleword InstructionsTom Musta3-0/+16
This patch adds the Vector Pack Doubleword instructions introduced in Power ISA Version 2.07: - Vector Pack Signed Doubleword Signed Saturate (vpksdss) - Vector Pack Signed Doubleword Unsigned Saturate (vpksdus) - Vector Pack Unsigned Doubleword Unsigned Modulo (vpkudum) - Vector Pack Unsigned Doubleword Unsigned Saturate (vpkudus) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Min/Max Doubleword InstructionsTom Musta3-0/+14
This patch adds the Vector Minimum and Maximum Doubleword instructions that are introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Population Count InstructionsTom Musta3-4/+36
This patch adds the Vector Population Count instructions introduced in Power ISA Version 2.07: vpopcntb, vpopcnth, vpopcntw and vpopcntd. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Add Vector Count Leading ZeroesTom Musta3-0/+43
This patch adds the Vector Count Leading Zeroes instructions introduced in Power ISA Version 2.07 - vclzb, vclzh, vclzw and vclzd. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: vmuluw InstructionTom Musta3-1/+6
This patch adds the Vector Multiply Unsigned Word Modulo (vmuluwm) instruction. The existing VARITH_DO macro is re-used to (trivially) instantiate the helper code. Since bits 21-31 of any vmuluwm instruction is 137, the instruction is coded as a dual to vmulouw (bits 21-31 = 136). Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Multiply Even/Odd Word InstructionsTom Musta3-0/+14
This patch adds the Multilpy Even/Odd Word instructions that are introduced in Power ISA Version 2.07: - Vector Multiply Even Unsigned Word (vmuleuw) - Vector Multiply Even Signed Word (vmulesw) - Vector Multiply Odd Unsigned Word (vmulouw) - Vector Multiply Odd Signed Word (vmulosw) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Change VMUL_DO to Support 64-bit IntegersTom Musta1-12/+14
This VMUL_DO macro provides support for the various vmule* and vmulo* instructions. These instructions multiply vector elements, producing products that are one size larger; e.g. vmuleub multiplies unsigned 8-bit elements and produces a 16 bit unsigned element. The existing macro works correctly for the existing instructions (8-bit, and 16-bit source elements) but does not work correctly for 32-bit source elements. This patch adds an explicit cast to the multiplicands, forcing them to be of the target element type. This is required for the forthcoming patches that add the vmul[eo][us]w instructions. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Add/Subtract Unsigned Doubleword ModuloTom Musta3-0/+7
This patch adds two Altivec unsigned doublword modulo instructions that are introduced in Power ISA Version V2.07: - vaddudm : Vector Add Unsigned Doubleword Modulo - vsubudm : Vector Subtrace Unsigned Doubleword Modulo Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Logical InstructionsTom Musta1-0/+11
This patch adds the Vector Logical Instructions that are introduced in Power ISA Version 2.07: veqv, vnand and vorc. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Add Support for R-Form Dual InstructionsTom Musta1-0/+35
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31 (aka the "Rc" bit) as an opcode but also use bit 21 as an actual Rc bit. QEMU for PowerPC typically uses bits 0-5 and 21-30 for opcodes. This patch introduces a generator macro that injects an auxiliary handler which decodes both bits 21 and 31 and invokes one of four standard handlers. Since the instructions are not, in general, from the same version of the ISA, two sets of PPC_*/PPC2_* flags are supported. This patch also introduces a macro to insert two entries into the opcode table -- one for bit 21 equal to 0 and one for bit 21 equal to 1. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Add Opcode Macro for VX Form InstructionsTom Musta1-0/+5
This patch adds a macro to insert an entry into the opcode table for Altivec Power ISA Version 2.07 instructions. The macro is similar to the GEN_VXFORM macro except that it tags the entry with the PPC2_ALTIVEC_207 flag rather than PPC_ALTIVEC. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Add Support for Dual Altivec InstructionsTom Musta1-0/+24
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31 (aka the "Rc" bit) as an opcode bit. However, QEMU for PowerPC uses bits 0-5 and 21-30 for opcodes and not bit 31. This patch introduces macros that will handle this situation by injecting an auxiliary handler which decodes bit 31 in invokes one of two standard handlers. Since the instructions are not, in general, from the same version of the ISA, two sets of PPC_*/PPC2_* instruction tags are supported. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Add GEN_VXFORM3Tom Musta1-0/+19
This patch adds generator macro for Altivec instructions that have 3 source AVR operands. The macro is similar to the 2 operand form. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Update AVR StructureTom Musta1-0/+4
This patch updates the ppc_avr_t data structure to include elements for signed 64-bit integers and (conditionally) unsigned 128 bit integers. These elements will be in instructions models later on in this patch series. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Add Instruction FlagTom Musta2-2/+5
This patch adds a flag that will be used to tag the Altivec instructions introduced in Power ISA Version 2.07. The flag is added to Power8 model since P8 supports these instructions. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add Store Quadword ConditionalTom Musta2-1/+38
This patch adds the Store Quadword Conditionl (stqcx.) instruction which is introduced in Power ISA 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: fix compile error when !TARGET_PPC64] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add Load Quadword and ReserveTom Musta2-0/+38
This patch adds the Load Quadword and Reserve (lqarx) instruction, which is new in Power ISA 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Store QuadwordTom Musta1-16/+23
This patch adds support for the Store Quadword instruction in user mode. Prior to Power ISA 2.07, stq was legal only in privileged mode. Support for Little Endian mode is also new in ISA 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Load QuadwordTom Musta2-15/+23
This patch adds the Book I (user space) Load Quadword (lq) instruction. This instruction was introduced into Book I in Power ISA V2.07. Previous versions of the architecture supported this as a privileged instruction. Previous versions of the architecture also did not support Little Endian mode. Note that this patch also adds the PPC_64BX flag to the Power8 model, which enables the lq instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add is_user_mode Utility RoutineTom Musta1-0/+14
This patch adds a boolean function is_user_mode that can be re-used in translation code that is sensitive to the MSR[PR] (user-mode) state. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add Flag for ISA 2.07 Load/Store Quadword InstructionsTom Musta2-2/+5
This patch adds a flag to identify the load/store quadword instructions that are introduced with Power ISA 2.07. The flag is added to the Power8 model since P8 supports these instructions. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add bctar InstructionTom Musta1-1/+10
This patch adds the Branch Conditional to Address Register (bctar) instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add Target Address SPR (TAR) to Power8Tom Musta2-1/+14
This patch adds support for the Target Address Register (TAR) to the Power8 model. Because supported SPRs are typically identified in an init_proc_*() function and because the Power8 model is currently just using the init_proc_POWER7() function, a new init_proc_POWER8() function is added and plugged into the P8 model. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add Flag for bctarTom Musta2-3/+5
This patch adds a flag for the bctar instruction. This instruction is being introduced via Power ISA 2.07. Also, the flag is added to the Power8 machine model since the P8 processor supports this instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Fix xxpermdi When T==A or T==BTom Musta1-8/+33
The existing implementation of xxpermdi is defective if the target VSR is also a source VSR. This patch fixes the defect in this case but also preserves the simpler, two TCG operation implementation when the target is not once of the two sources. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: add extended opcodes for dcbt/dcbtstCédric Le Goater1-2/+2
The latest glibc provides a memrchr routine using an extended opcode of the 'dcbt' instruction : 00000000000a7cc0 <memrchr>: a7cc0: 11 00 4c 3c addis r2,r12,17 a7cc4: b8 f8 42 38 addi r2,r2,-1864 a7cc8: 14 2a e3 7c add r7,r3,r5 a7ccc: d0 00 07 7c neg r0,r7 a7cd0: ff ff e7 38 addi r7,r7,-1 a7cd4: 78 1b 6a 7c mr r10,r3 a7cd8: 24 06 e6 78 rldicr r6,r7,0,56 a7cdc: 60 00 20 39 li r9,96 a7ce0: 2c 32 09 7e dcbtt r9,r6 .... which breaks grep, and other commands, in TCG mode : invalid bits: 02000000 for opcode: 1f - 16 - 08 (7e09322c) 00003fff799feca0 This patch adds the extended opcodes for dcbt/dcbtst as no-ops just like the 'dcbt' instruction. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05qdev: Keep global allocation counter per busAlexander Graf3-8/+22
When we have 2 separate qdev devices that both create a qbus of the same type without specifying a bus name or device name, we end up with two buses of the same name, such as ide.0 on the Mac machines: dev: macio-ide, id "" bus: ide.0 type IDE dev: macio-ide, id "" bus: ide.0 type IDE If we now spawn a device that connects to a ide.0 the last created bus gets the device, with the first created bus inaccessible to the command line. After some discussion on IRC we concluded that the best quick fix way forward for this is to make automated bus-class type based allocation count a global counter. That's what this patch implements. With this we instead get dev: macio-ide, id "" bus: ide.1 type IDE dev: macio-ide, id "" bus: ide.0 type IDE on the example mentioned above. This also means that if you did -device ...,bus=ide.0 you got a device on the first bus (the last created one) before this patch and get that device on the second one (the first created one) now. Breaks migration unless you change bus=ide.0 to bus=ide.1 on the destination. This is intended and makes the bus enumeration work as expected. As per review request follows a list of otherwise affected boards and the reasoning for the conclusion that they are ok: target machine bus id times ------ ------- ------ ----- aarch64 n800 i2c-bus.0 2 aarch64 n810 i2c-bus.0 2 arm n800 i2c-bus.0 2 arm n810 i2c-bus.0 2 -> Devices are only created explicitly on one of the two buses, using s->mpu->i2c[0], so no change to the guest. aarch64 vexpress-a15 virtio-mmio-bus.0 4 aarch64 vexpress-a9 virtio-mmio-bus.0 4 aarch64 virt virtio-mmio-bus.0 32 arm vexpress-a15 virtio-mmio-bus.0 4 arm vexpress-a9 virtio-mmio-bus.0 4 arm virt virtio-mmio-bus.0 32 -> Makes -device bus= work for all virtio-mmio buses. Breaks migration. Workaround for migration from old to new: specify virtio-mmio-bus.4 or .32 respectively rather than .0 on the destination. aarch64 xilinx-zynq-a9 usb-bus.0 2 arm xilinx-zynq-a9 usb-bus.0 2 mips64el fulong2e usb-bus.0 2 -> Normal USB operation not affected. Migration driver needs command line to use the other bus. i386 isapc ide.0 2 x86_64 isapc ide.0 2 mips mips ide.0 2 mips64 mips ide.0 2 mips64el mips ide.0 2 mipsel mips ide.0 2 ppc g3beige ide.0 2 ppc mac99 ide.0 2 ppc prep ide.0 2 ppc64 g3beige ide.0 2 ppc64 mac99 ide.0 2 ppc64 prep ide.0 2 -> Makes -device bus= work for all IDE buses. Breaks migration. Workaround for migration from old to new: specify ide.1 rather than ide.0 on the destination. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Update external_htab even when HTAB is managed by kernelAneesh Kumar K.V1-0/+7
We will use this in later patches to make sure we use the right load functions when copying hpte entries. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05spapr: print more detailed error message on failed load_elf()Alexey Kardashevskiy1-3/+3
This makes use of new error codes which load_elf() can return and prints more informative error message. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05elf-loader: add more return codesAlexey Kardashevskiy4-13/+46
The existing load_elf() just returns -1 if it fails to load ELF. However it could be smarter than this and tell more about the failure such as wrong endianness or incompatible platform. This adds additional return codes for wrong architecture, wrong endianness and if the image is not ELF at all. This adds a load_elf_strerror() helper to convert return codes into string messages. This fixes handling of what load_elf() returns for s390x, other callers just check the return value for <0 and this remains unchanged. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05moxie: fix load_elf() usageAlexey Kardashevskiy1-1/+1
At the moment in the case of error, load_elf() returns -1 so load_kernel() will not signal error at all. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.1 at 2024-12-24 13:41:23 +0000