aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-02-06vnc: recognize Hungarian doubleacutesMichael Tokarev1-0/+4
As reported in http://bugs.debian.org/697641 , some Hungarian keys does not work with qemu when using vnc display. This is because while the Hungarian keymap mentions these symbols, qemu know nothing about them. So add them. This patch is applicable to -stable for all previous releases. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06qemu/9p: Don't ignore error in fid clunkAneesh Kumar K.V1-5/+7
We use the clunk request to do the actual xattr operation. So don't ignore the error value for fid clunk. Security model "none" don't support posix acl. Without this patch guest won't get EOPNOTSUPP error on setxattr("system.posix_acl_access") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06qemu/iovec: Don't assert if sbytes is zeroAneesh Kumar K.V1-0/+4
Since these values can possibly be sent from guest (for hw/9pfs), do a sanity check on them. A 9p write request with 0 bytes caused qemu to abort without this patch Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06e1000: fix link down handling with auto negotiationMichael S. Tsirkin1-6/+36
Fixes a couple of regression bugs introduced by b9d03e352cb6b31a66545763f6a1e20c9abf0c2c and related to auto-negotiation: - Auto-negotiation currently sets link up even if it was forced down from the monitor. - If Auto-negotiation was in progress during migration, link will never come up. As a fix, don't touch NC link_down field at all, instead add code on receive path to check guest link status. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06configure: Fix build with XFreeRichard Henderson1-1/+1
The build is broken on ppc64-linux, possibly only with new binutils: ld: hw/lm32/../milkymist-tmu2.o: undefined reference to symbol 'XFree' ld: note: 'XFree' is defined in DSO /lib64/libX11.so.6 so try \ adding it to the linker command line So let's follow the linker's advice. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06bswap: Fix width of swap in leul_to_cpuRichard Henderson1-2/+10
The misnamed HOST_LONG_BITS is really HOST_POINTER_BITS. Here we're explicitly using an unsigned long, rather than uintptr_t, so it is more correct to select the swap size via ULONG_MAX. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-05bios: recompile BIOSAnthony Liguori1-0/+0
SeaBIOS is really close to spilling over to 256k. Until we can better handle migration across RAM block size changes, recompile SeaBIOS with a compiler that causes the binary to still fit in 128k. This was built with: gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) On 64-bit Fedora 18. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04target-s390x: Fix wrong comparison in interrupt handlingStefan Weil1-1/+1
gcc with -Wextra complains about an ordered pointer comparison: target-s390x/helper.c:660:27: warning: ordered comparison of pointer with integer zero [-Wextra] Obviously the index was missing in the code. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04s390x: silence warning from GCC on uninitialized valuesAnthony Liguori1-1/+1
As best I can tell, this is a false positive. [aliguori@ccnode4 qemu-s390]$ make CC s390x-softmmu/target-s390x/helper.o /home/aliguori/git/qemu/target-s390x/helper.c: In function ‘do_interrupt’: /home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized] /home/aliguori/git/qemu/target-s390x/helper.c:620:20: note: ‘addr’ was declared here /home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized] /home/aliguori/git/qemu/target-s390x/helper.c:620:14: note: ‘mask’ was declared here cc1: all warnings being treated as errors make[1]: *** [target-s390x/helper.o] Error 1 make: *** [subdir-s390x-softmmu] Error 2 Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04acpi_piix4: fix segfault migrating from 1.2Michael Roth1-2/+2
b0b873a07872f7ab7f66f259c73fb9dd42aa66a9 bumped the vmstate version and introduced an old-style load function to handle migration from prior (<= 1.2) versions. The load function passes the top-level PIIX4PMState pointer to vmstate_load_state() to handle nested structs for APMState and pci_status, which leads to corruption of the top-level PIIX4PMState, since pointers to the nested structs are expected. A segfault can be fairly reliably triggered by migrating from 1.2 and issuing a reset, which will trigger a number of QOM operations which rely on the now corrupted ObjectClass/Object members. Fix this by passing in the expected pointers for vmstate_load_state(). Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04vl.c: validate -numa "cpus" parameter properlyEduardo Habkost1-5/+27
- Accept empty strings without aborting - Use parse_uint*() to parse numbers - Abort if anything except '-' or end-of-string is found after the first number. - Check for endvalue < value Also change the MAX_CPUMASK_BITS warning message from "A max of %d CPUs are supported in a guest" to "qemu: NUMA: A max of %d VCPUs are supported". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04vl.c: Extract -numa "cpus" parsing to separate functionEduardo Habkost1-18/+23
This will make it easier to refactor that code later. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04vl.c: Use parse_uint_full() for NUMA nodeidEduardo Habkost1-1/+4
This should catch many kinds of errors that the current code wasn't checking for: - Values that can't be parsed as a number - Negative values - Overflow - Empty string Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04vl.c: numa_add(): Validate nodeid before using itEduardo Habkost1-1/+6
Without this check, QEMU will corrupt memory if a too-large nodeid is provided in the command-line. e.g.: -numa node,mem=...,cpus=...,nodeid=65 This changes nodenr to unsigned long long, to avoid integer conversion issues when converting the strtoull() result to int. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04vl.c: Check for NUMA node limit inside numa_add()Eduardo Habkost1-4/+6
Instead of checking the limit before calling numa_add(), check the limit only when we already know we're going to add a new node. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04vl.c: Abort on unknown -numa option typeEduardo Habkost1-0/+3
Abort in case an invalid -numa option is provided, instead of silently ignoring it. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04vl.c: Fix off-by-one bug when handling "-numa node" argumentEduardo Habkost1-1/+4
The numa_add() code was unconditionally adding 1 to the get_opt_name() return value, making it point after the end of the string if no ',' separator is present. Example of weird behavior caused by the bug: $ qemu-img create -f qcow2 this-file-image-has,cpus=5,mem=1000,in-its-name.qcow2 5G Formatting 'this-file-image-has,cpus=5,mem=1000,in-its-name.qcow2', fmt=qcow2 size=5368709120 encryption=off cluster_size=65536 $ ./x86_64-softmmu/qemu-system-x86_64 -S -monitor stdio -numa node 'this-file-image-has,cpus=5,mem=1000,in-its-name.qcow2' QEMU 1.3.50 monitor - type 'help' for more information (qemu) info numa 1 nodes node 0 cpus: 0 node 0 size: 1000 MB (qemu) This changes the code to nove the pointer only if ',' is found. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04cutils: unsigned int parsing functionsEduardo Habkost4-0/+357
There are lots of duplicate parsing code using strto*() in QEMU, and most of that code is broken in one way or another. Even the visitors code have duplicate integer parsing code[1]. This introduces functions to help parsing unsigned int values: parse_uint() and parse_uint_full(). Parsing functions for signed ints and floats will be submitted later. parse_uint_full() has all the checks made by opts_type_uint64() at opts-visitor.c: - Check for NULL (returns -EINVAL) - Check for negative numbers (returns -EINVAL) - Check for empty string (returns -EINVAL) - Check for overflow or other errno values set by strtoll() (returns -errno) - Check for end of string (reject invalid characters after number) (returns -EINVAL) parse_uint() does everything above except checking for the end of the string, so callers can continue parsing the remainder of string after the number. Unit tests included. [1] string-input-visitor.c:parse_int() could use the same parsing code used by opts-visitor.c:opts_type_int(), instead of duplicating that logic. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04target-cris: Build fix for debug outputAndreas Färber1-1/+1
Around r3361 (81fdc5f8d2d681da8d255baf0713144f8656bac9) env->debug1 used to contain the address of an MMU fault. This is now written into env->pregs[PR_EDA] instead. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-02-02bitops: unify bitops_ffsl with the one in host-utils.h, call it bitops_ctzlPaolo Bonzini6-65/+28
We had two copies of a ffs function for longs with subtly different semantics and, for the one in bitops.h, a confusing name: the result was off-by-one compared to the library function ffsl. Unify the functions into one, and solve the name problem by calling the 0-based functions "bitops_ctzl" and "bitops_ctol" respectively. This also fixes the build on platforms with ffsl, including Mac OS X and Windows. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-02util: Fix compilation of envlist.c for MinGWStefan Weil2-6/+3
MinGW has no strtok_r, so we need a declaration in sysemu/os-win32.h. We must also fix the include statements in util/envlist.c to include that file. We currently don't need an implementation of strtok_r because the code is compiled but not linked for MinGW. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-01Update version for 1.4.0-rc0v1.4.0-rc0Anthony Liguori1-1/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: unbreak -netdev tap,fd=XAnthony Liguori1-1/+1
The multiqueue patch series broke -netdev tap,fd=X which manifests as libvirt not being able to start a guest. This was because it passed NULL for the netdev name which results in an anonymous netdev device regardless of what the user specified. Cc: Jason Wang <jasowang@redhat.com> Cc: Bruce Rogers <brogers@suse.com> Reported-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qom: remove object_deletePaolo Bonzini2-24/+10
This is now unused. Document the initial reference count of an object and when it will be freed/finalized. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01cpu: do not use object_deletePaolo Bonzini4-5/+5
CPUs are never added to the composition tree, so delete is achieved simply by removing the last references to them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: drop extra references at creation timePaolo Bonzini3-4/+7
qdev_free and qbus_free have to do unparent+unref, because nobody else drops the initial reference (the one included by object_initialize) before them. For device_init_func and do_device_add, this is trivially correct, since the DeviceState goes out of scope. For qdev_create, qdev_try_create and qbus_init, it is a bit more tricky. What we are doing here is just assuming that the caller knows what it's doing, and won't call qdev_free/qbus_free while the device is still there. This is a pretty reasonable assumption and (behind the scenes) is also what GObject/GTK does. GTK actually has a "floating reference" that goes away as soon as the caller does gtk_container_add or something like that, but in the end qbus_init and qdev_try_create are already adding the new object to its qdev parent! So in the end the two solutions are the same. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: inline object_delete into qbus_free/qdev_freePaolo Bonzini1-2/+4
We want object_delete to disappear, and we will do this one class at a time. Inline it for the qdev case, which we will tackle first. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: add reference for the bus while it is referred to by the DeviceStatePaolo Bonzini1-0/+3
Now that the unparent callbacks are complete, we can correctly account more missing references. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: move unrealization of devices from finalize to unparentPaolo Bonzini1-18/+17
Similarly, a bus holds a reference back to the device, and this will prevent the device from going away as soon as this reference is counted properly. To avoid this, move the unrealization of devices to the unparent callback. This includes recursively unparenting all the buses and (after the previous patch) the devices on those buses, which ensures that the web of references completely disappears for all devices that reside (in the qdev tree) below the one being unplugged. After this patch, the qdev tree and the bus<->child relationship is defined as "A is above B, iff unplugging A will automatically unplug B". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: move deletion of children from finalize to unparentPaolo Bonzini1-12/+25
A device will never be finalized as long as it has a reference from other devices that sit on its buses. To ensure that the references go away, deassociate a bus from its children in the unparent callback for the bus. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: add reference count to a device for the BusChildPaolo Bonzini1-0/+5
Each device has a reference through the BusChild. This reference was not accounted for, add it now. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qom: document reference counting of link propertiesPaolo Bonzini1-0/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qom: preserve object while unparenting itPaolo Bonzini1-0/+2
Avoid that the object disappears after it's deleted from the QOM composition tree, in case that was the only reference to it. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01pci: use qbus_create in pci_bus_newPaolo Bonzini1-6/+15
Remove knowledge of QOM innards. The common part of pci_bus_new and pci_bus_new_inplace is moved to a new function pci_bus_init. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: change first argument of qbus_create_inplace to void *Paolo Bonzini2-2/+2
Make it clear that no BUS() macro is needed in the callers (in fact it wouldn't work because the object has not been initialized yet with the right class). Suggested-by: Andreas Faerber <afaerber@suse.de> Acked-by: Andreas F=E4rber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: remove duplication between qbus_create and qbus_create_inplacePaolo Bonzini1-11/+7
Move the common part to qbus_realize. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01accel: change {xen, kvm, tcg, qtest}_allowed from int to boolliguang5-11/+11
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01vl: correct error message when fail to init kvmliguang1-5/+7
command: qemu-system-x86_64 -hda disk.img -smp 32 --enable-kvm error: Number of SMP cpus requested (32) exceeds max cpus supported by KVM (16) failed to initialize KVM: Invalid argument No accelerator found! well, it did find kvm, but failed to init, so message "No accelerator found!" is confusing, this commit remove the confusing error message. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01vl: skip init accelerator if it's not availableliguang1-8/+8
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01sparc: disable qtest in make checkAnthony Liguori1-2/+2
We've seen this repeatedly in buildbot but I can now reliably reproduce it myself too. With a few hundred runs of 'make check', qemu-system-sparc will hang consuming 100% CPU. I've attached GDB to the hung process and unfortunately, I can't get anything useful out of GDB (RIP is not a valid simple and there is nothing else on the stack). At any rate, since this only manifests in qemu-system-sparc and it doesn't appear to be a qtest specific problem, I think we should disable it until the problem is resolved. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori15-102/+379
# By Kevin Wolf (7) and others # Via Stefan Hajnoczi * stefanha/block: block/raw-posix: Build fix for O_ASYNC vmdk: Allow space in file name parallels: Fix bdrv_open() error handling dmg: Use g_free instead of free dmg: Fix bdrv_open() error handling vpc: Fix bdrv_open() error handling cloop: Fix bdrv_open() error handling bochs: Fix bdrv_open() error handling sheepdog: pass vdi_id to sheep daemon for sd_close() vmdk: Allow selecting SCSI adapter in image creation block: Adds mirroring tests for resized images block: Fix is_allocated_above with resized files qemu-iotests: Add regression test for b7ab0fea
2013-02-01xen: fix build problem introduced from per-queue peersAnthony Liguori1-2/+0
Reported-by Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01virtio-net: compat multiqueue supportJason Wang1-0/+4
Disable multiqueue support for pre 1.4. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01virtio-net: migration support for multiqueueJason Wang1-6/+29
This patch add migration support for multiqueue virtio-net. Instead of bumping the version, we conditionally send the info of multiqueue only when the device support more than one queue to maintain the backward compatibility. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01virtio-net: multiqueue supportJason Wang2-67/+263
This patch implements both userspace and vhost support for multiple queue virtio-net (VIRTIO_NET_F_MQ). This is done by introducing an array of VirtIONetQueue to VirtIONet. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01virtio-net: separate virtqueue from VirtIONetJason Wang1-81/+114
To support multiqueue virtio-net, the first step is to separate the virtqueue related fields from VirtIONet to a new structure VirtIONetQueue. The following patches will add an array of VirtIONetQueue to VirtIONet based on this patch. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01virtio: add a queue_index to VirtQueueJason Wang2-0/+9
Add a queue_index to VirtQueue and a helper to fetch it, this could be used by multiqueue supported device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01virtio: introduce virtio_del_queue()Jason Wang2-0/+11
Some device (such as virtio-net) needs the ability to destroy or re-order the virtqueues, this patch adds a helper to do this. Signed-off-by: Jason Wang <jasowang> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01vhost: multiqueue supportJason Wang5-58/+120
This patch lets vhost support multiqueue. The idea is simple, just launching multiple threads of vhost and let each of vhost thread processing a subset of the virtqueues of the device. After this change each emulated device can have multiple vhost threads as its backend. To do this, a virtqueue index were introduced to record to first virtqueue that will be handled by this vhost_net device. Based on this and nvqs, vhost could calculate its relative index to setup vhost_net device. Since we may have many vhost/net devices for a virtio-net device. The setting of guest notifiers were moved out of the starting/stopping of a specific vhost thread. The vhost_net_{start|stop}() were renamed to vhost_net_{start|stop}_one(), and a new vhost_net_{start|stop}() were introduced to configure the guest notifiers and start/stop all vhost/vhost_net devices. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: multiqueue supportJason Wang9-44/+139
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF for a signle device many times to create multiple file descriptors as independent queues. User could also enable/disabe a specific queue through TUNSETQUEUE. The patch adds the generic infrastructure to create multiqueue taps. To achieve this a new parameter "queues" were introduced to specify how many queues were expected to be created for tap by qemu itself. Alternatively, management could also pass multiple pre-created tap file descriptors separated with ':' through a new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file descriptors could also be passed in this way. Each TAPState were still associated to a tap fd, which mean multiple TAPStates were created when user needs multiqueue taps. Since each TAPState contains one NetClientState, with the multiqueue nic support, an N peers of NetClientState were built up. A new parameter, mq_required were introduce in tap_open() to create multiqueue tap fds. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-26 06:14:59 +0000