aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-17dmg: use preadChristoph Hellwig1-37/+51
Use pread instead of lseek + read in preparation of using the qemu block API. Note that dmg actually uses the implicit file offset a lot in dmg_open, and we had to replace it with an offset variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17dmg: fix reading of uncompressed chunksChristoph Hellwig1-1/+2
When dmg_read_chunk encounters an uncompressed chunk it currently calls read without any previous adjustment of the file postion. This seems very wrong, and the "reference" implementation in dmg2img does a search to the same offset as done in the various compression cases, so do the same here. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block/vpc: Fix conversion from size to disk geometryStefan Weil1-9/+12
The VHD algorithm calculates a disk geometry which is usually smaller than the requested size. QEMU tried to round up but failed for certain sizes: qemu-img create -f vpc disk.vpc 9437184 would create an image with 9435136 bytes (which is too small for qemu-img convert). Instead of hacking the geometry algorithm, the patch increases the number of sectors until we get enough sectors. Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17parallels: use qemu block APIChristoph Hellwig1-18/+6
Use bdrv_pwrite to access the backing device instead of pread, and convert the driver to implementing the bdrv_open method which gives it an already opened BlockDriverState for the underlying device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17parallels: use preadChristoph Hellwig1-22/+11
Use pread instead of lseek + read in preparation of using the qemu block API. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block/vdi: Allow disk images of size 0Stefan Weil1-2/+7
Even it is not very useful, users may create images of size 0. Without the special option CONFIG_ZERO_MALLOC, qemu_mallocz aborts execution when it is told to allocate 0 bytes, so avoid this kind of call. Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block: Fix bdrv_commitKevin Wolf1-3/+3
When reopening the image, don't guess the driver, but use the same driver as was used before. This is important if the format=... option was used for that image. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block: Fix protocol detection for Windows devicesKevin Wolf1-4/+6
We can't assume the file protocol for Windows devices, they need the same detection as other files for which an explicit protocol is not specified. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block: Avoid unchecked casts for AIOCBsKevin Wolf5-6/+7
Use container_of for one direction and &acb->common for the other one. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17bochs: use qemu block APIChristoph Hellwig1-21/+9
Use bdrv_pwrite to access the backing device instead of pread, and convert the driver to implementing the bdrv_open method which gives it an already opened BlockDriverState for the underlying device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17bochs: use preadChristoph Hellwig1-43/+20
Use pread instead of lseek + read in preparation of using the qemu block API. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17ide: Fix ide_dma_cancelKevin Wolf1-4/+4
When cancelling a request, bdrv_aio_cancel may decide that it waits for completion of a request rather than for cancellation. IDE therefore can't abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback of a completed request would use invalid data. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17cloop: use qemu block APIChristoph Hellwig1-14/+12
Use bdrv_pwrite to access the backing device instead of pread, and convert the driver to implementing the bdrv_open method which gives it an already opened BlockDriverState for the underlying device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17cloop: use preadChristoph Hellwig1-15/+17
Use pread instead of lseek + read in preparation of using the qemu block API. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17qemu-nbd: Improve error reportingRyota Ozaki1-10/+24
- use err(3) instead of errx(3) if errno is available to report why failed - let fail prior to daemon(3) if opening a nbd file is likely to fail after daemonizing to avoid silent failure exit - add missing 'ret = 1' when unix_socket_outgoing failed Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block: Remove semicolon in BDRV_SECTOR_MASK macroStefan Hajnoczi1-1/+1
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-16sparc: move DT and QT defines to op_helper.cBlue Swirl2-5/+5
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-16sparc64: fix TT_WOTHER valueIgor V. Kovalenko1-1/+1
- fix off by one error in spill trap number bit for other window (must be bit 5) - fixes invalid instruction issue with HelenOS Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-16sparc64: fix mmu demap operand typoIgor V. Kovalenko1-2/+2
- must use store address operand to demap, not store value Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15Update to a hopefully more future proof FSF addressBlue Swirl3-10/+8
See also 70539e1850ddd3a7ee6f9a8db7bd8e81b85225a4, 8167ee883931cb20c6264fc19d040ce2dc6ceaaa, 530e7615ce3c01882e582c84dc6304ab98a3d5c5 and fad6cb1a565bb73f83fc0e2654489457b489e436. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15Trim unnecessary includesBlue Swirl4-11/+0
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15mc146818rtc: remove #ifdef DEBUG_CMOS.Isaku Yamahata1-8/+10
remove #ifdef DEBUG_CMOS by using macro. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15apm: remove #ifdef DEBUG.Isaku Yamahata1-6/+8
remove #ifdef DEBUG by using macro. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi_piix4: remove #ifdef DEBUG.Isaku Yamahata1-37/+18
removed #ifdef DEBUG by using macro. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pm_smbus: remove #ifdef DEBUG.Isaku Yamahata1-9/+12
remove #ifdef DEBUG by using macro. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pci hotadd, acpi_piix4: remove global variablesIsaku Yamahata3-43/+48
remove global variables, gpe and pci0_status by moving them into PIIX4PMState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pci hotplug: add argument to pci hot plug callback.Isaku Yamahata3-8/+10
Add argument, DeviceState*, to pci hot plug callback. The argument will be used later to remove global variable. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi_piix4: qdevfy.Isaku Yamahata1-15/+46
qdevfy acpi_piix4. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15rtc: make rtc_xxx accept/return ISADevice instead of RTCState.Isaku Yamahata9-26/+34
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice instead of RTCState. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: move rtc declarations from pc.h into a dedicated header file.Isaku Yamahata2-8/+11
Move rtc_xxx declarations from pc.h into mc146818rtc.h. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: split out piix specific part from pc.c into pc_piix.cIsaku Yamahata5-327/+381
Finally, we can safely split out the piix specific part from pc.c into pc_piix.c. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: split out pci device init from pc_init1() into pc_pci_device_init()Isaku Yamahata1-7/+12
Split out pci device initialization from pc_init1() into pc_pci_device_init(). and removed unnecessary braces. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: split out basic device init from pc_init1() into pc_basic_device_init()Isaku Yamahata1-38/+48
Split out basic device, i.e. legacy devices like floppy, initialization from pc_init1() into pc_basic_device_init(). Later it will be used. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: split out vga initialization from pc_init1() into pc_vga_init().Isaku Yamahata1-18/+23
Split out vga initialization which is independent of piix from pc_init1() as pc_vga_init(). Later it will be used. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: split out memory allocation from pc_init1() into pc_memory_init()Isaku Yamahata1-28/+45
Split out memory allocation and rom/bios loading which doesn't depend on piix from pc_init1() into pc_memory_init(). Later it will be used. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: split out cpu initialization from pc_init1() into pc_cpus_init().Isaku Yamahata1-12/+19
split out cpu initialization which is piix independent from pc_init1() into pc_cpus_init(). Later it will be used. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: make pc_init1() not refer ferr_irq directly.Isaku Yamahata2-1/+9
By introducing a registering function, make pc_init1() not refer to ferr_irq directly in order to make ferr_irq piix independent. Later pc_init1() will be split out into another file keeping ferr_irq static. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: introduce a function to allocate cpu irq.Isaku Yamahata1-1/+6
Introduce a function, pc_allocate_cpu_irq(), to allocate cpu irq in order to make pic_irq_request() piix independent. Later piix code will be split out to another file keeping pic_irq_request() static. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: remove global variable rtc_state by using qemu_irq.Isaku Yamahata1-9/+7
Remove the reference to the global variable, rtc_state, by passing function argument to cmos_init_hd(), cmos_init(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Paolo Bonzini <bonzini@gnu.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: remove a global variable, floppy_controller.Isaku Yamahata1-3/+5
Remove a global variable, floppy_controller. Since it is unnecessarily global, make it local and pass it as a function argument. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: make an unnecessary global variable, pit, local.Isaku Yamahata1-1/+1
remove unnecessary global static variables, pit. Make it local. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc, i440fx: Make smm enable/disable function i440fx independent.Isaku Yamahata3-5/+22
make cpu_smm_update() generic to be independent on i440fx by registering a callback. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: initialize ioapic before use.Isaku Yamahata1-3/+3
The changeset of 2c8d9340203c7f19265fd4cb2341f568217a3af6 prevents isa_irq_handler() from NULL refering of IsaIrqState::ioapic. However it would be better to initialize the member before reference. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: split acpi.c into the common part and the piix4 part.Isaku Yamahata3-564/+585
Split acpi.c into the common part and the piix4 specific part. The common part will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: add acpi constants from linux header files and use them.Isaku Yamahata2-31/+103
add acpi constants from linux header files and replace the old constants with them. The acpi constants will be used by other file. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: split out apm register emulation from acpi.cIsaku Yamahata4-45/+127
Split out apm register emulation for acpi.c into apm.c. The apm emulation will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: split out piix4 smbus routines from acpi.c into pm_smbus.cIsaku Yamahata4-156/+209
Split out piix4 smbus routines from acpi.c into pm_smbus.c and use it. The split out smbus emulation will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15mc146818rtc: Register vmstate via qdevJan Kiszka1-1/+2
After defining the required alias ID, we can push vmstate registration of mc146818rtc to qdev. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15fdc: Register vmstate via qdevJan Kiszka1-5/+30
Establish vmstate containers for ISA and sysbus variant, define the iobase as instance ID alias, and let qdev do the vmstate registration work. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15serial: Register vmstate via qdevJan Kiszka1-1/+12
At least for isa-serial, we can already let qdev do the vmstate registration for us. It just takes wrapping vmstate for the encapsulating ISASerialState and defining the proper instance ID aliases. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2025-02-07 15:03:40 +0000