aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-08-10qdev-ify virtio-blk.Gerd Hoffmann8-44/+25
First user of the new drive property. With this patch applied host and guest config can be specified separately, like this: -drive if=none,id=disk1,file=/path/to/disk.img -device virtio-blk-pci,drive=disk1 You can set any property for virtio-blk-pci now. You can set the pci address via addr=. You can switch the device into 0.10 compat mode using class=0x0180. As this is per device you can have one 0.10 and one 0.11 virtio block device in a single virtual machine. Old syntax continues to work. Internally it does the same as the two lines above though. One side effect this has is a different initialization order, which might result in a different pci address being assigned by default. Long term plan here is to have this working for all block devices, i.e. once all scsi is properly qdev-ified you will be able to do something like this: -drive if=none,id=sda,file=/path/to/disk.img -device lsi,id=lsi,addr=<pciaddr> -device scsi-disk,drive=sda,bus=lsi.0,lun=<n> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10qdev/prop: add drive property.Gerd Hoffmann2-0/+36
Adds a (host) drive property, intended to be used by virtual disk backend drivers. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10add -drive if=noneGerd Hoffmann2-0/+5
This adds a host drive, but doesn't implicitly add a guest drive for it. First step in splitting host and guest configuration, check the following patches to see how this can be used ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10constify drive_get_by_id argGerd Hoffmann2-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10QemuOpts: switch over -device.Gerd Hoffmann5-56/+73
Make -device switch use the QemuOpts framework. Everything should continue to work like it did before. New: "-set device.$id.$property=$value" works. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10QemuOpts: add -set optionGerd Hoffmann4-1/+52
One use case will be file for drives (no filename quoting issues), i.e. -drive id=test,if=virtio -set drive.test.file=/vmdisk/test-virtio.img It will work for any other option (assuming handled by QemuOpts) though. Except for id= for obvious reasons ;). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10QemuOpts: create qemu-config.hGerd Hoffmann4-73/+79
Move drive option description there. Rename it, give it a qemu_ prefix. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10QemuOpts: make the drive id actually show up in "info block".Gerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10QemuOpts: qemu_opts_parse: fix id= parsingGerd Hoffmann1-1/+6
We can't use get_param_value(), it can't handle parameters without '=' in there. Examples not working because of that: -device foo,id=bar -device file=/path/image,format=qcow2,snapshot,id=disk0 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10QemuOpts: add some functionsGerd Hoffmann2-0/+23
qemu_opt_foreach: loop over all QemuOpts entries. qemu_opts_id: return QemuOpts id. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10Fix symfind.Laurent Desnogues2-2/+2
this patch fixes an issue in symfind. Assume you have the following symbols: Address Size 0045bca0 00000080 T s0 0045bd20 00000112 T s1 You'll notice that s1 is s0 + size. So the current symfind will find that address 0045bd20 belongs to s0 instead of s1. Laurent Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10configure: let it find xen headers and libsChristoph Egger1-1/+1
Attached patch lets configure find xen headers and libs with --extra-cflags and --extra-ldlfags option. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10tolower -> qemu_tolowerChristoph Egger1-1/+1
Use qemu_tolower() instead of tolower(). Fixes warning on NetBSD. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10Do not try to invoke shebang scripts directly (NFS issues)malc2-3/+3
Signed-off-by: malc <av1474@comtv.ru>
2009-08-09Use qemu_irq for system_powerdownBlue Swirl5-34/+23
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-09Sparc32: use qemu_irq for system_powerdownBlue Swirl3-22/+19
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc32: move sparc32_dma init to sun4m.cBlue Swirl4-42/+42
Also connect ESP and Lance reset signals to DMA. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc32: remove VRAM and NVRAM sizes from hwdefBlue Swirl1-36/+6
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc32: remove IRQ numbers from hwdefBlue Swirl1-135/+25
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc32: move intbit_to_level table back to slavio_intctl.cBlue Swirl2-50/+8
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc32: move device instantiation to sun4m.cBlue Swirl10-245/+217
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc32: Refactor slavio timerBlue Swirl1-181/+209
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08ppc_newworld: configure screen size from QEMU command line optionsBlue Swirl1-0/+5
Use the FW_CFG interface to send user requested screen size and depth to OpenBIOS like 7f1aec5f93382eef75920899f4065613aeaf02a2 for ppc_oldworld. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc64: configure screen size from QEMU command line optionsBlue Swirl1-0/+8
Use the FW_CFG interface to send user requested screen size and depth to OpenBIOS like 7f1aec5f93382eef75920899f4065613aeaf02a2 for ppc_oldworld. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08ppc_oldworld: configure screen size from qemu command line optionsLaurent Vivier2-0/+8
This patch uses the FW_CFG interface to send user requested screen size and depth to openbios. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-04Sparc64: replace tsptr with helper routineIgor Kovalenko6-40/+69
tl and tsptr of members sparc64 cpu state must be changed simultaneously to keep trap state window in sync with current trap level. Currently translation of store to tl does not change tsptr, which leads to corrupt trap state on corresponding trap level. This patch removes tsptr from sparc64 cpu state and replaces all uses with call to helper routine. Changes v0->v1: - reimplemented helper routine with tcg generator - on cpu reset trap type and pstate are populated with power-on reset values, including tl=maxtl Signed-off-by: igor.v.kovalenko@gmail.com Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-03linux-user: make FUTEX_* calls honor timeout parameterNathan Froyd1-8/+16
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-08-03enable NPTL for ppc-linux-user targets in configureNathan Froyd1-0/+2
Enabling support for ppc64-linux-user should be easy enough to do later. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-08-03linux-user: handle POWERPC_EXCP_STCXNathan Froyd1-0/+68
We handle conditional stores as an exception so we can ensure that no other thread is changing memory out from underneath us. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-08-03target-ppc: add exceptions for conditional storesNathan Froyd2-20/+56
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-08-03target-ppc: retain l{w,d}arx loaded valueNathan Froyd5-10/+17
We do this so we can check on the corresponding stc{w,d}x. whether the value has changed. It's a poor man's form of implementing atomic operations and is valid only for NPTL usermode Linux emulation. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-08-03target-ppc: add cpu_set_tlsNathan Froyd1-0/+11
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-08-03target-ppc: fix cpu_clone_regsNathan Froyd1-3/+1
We only need to make sure that the clone syscall looks like it succeeded, not clobber 60% of the register set. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-08-01Fix Sparse warning about missing prototypeBlue Swirl2-2/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-01Fix Sparse warning about "expression using sizeof on a function"Blue Swirl1-3/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-01Add missing "static"Blue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-01More NULL pointer fixesBlue Swirl7-11/+13
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31Fix Sparse warnings: "Using plain integer as NULL pointer"Blue Swirl20-58/+59
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31PPC: convert Uni-north to qdev: also fixes Mac99 machine crashBlue Swirl1-55/+166
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31PPC: convert Grackle to qdevBlue Swirl1-20/+86
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31Option rom makefile fixesPaul Brook3-9/+13
Fix toplevel option rom makefile rules. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-07-31Save/restore ARMv6 MMU statePaul Brook2-2/+22
Correctly save/restore ARMV6 MMU state. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-07-31esp: fix interrupt register readBlue Swirl1-4/+9
Read of interrupt register should clear it and also sequence step and status. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31sparc64 flush pending conditional evaluations before exposing cpu stateIgor Kovalenko1-0/+5
If translation block is interrupted by e.g. mmu exception we need to compute conditional flags for inclusion into saved cpu state. Otherwise after return from trap conditional instructions would use stale psr/xcc data. Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
2009-07-31Fix SDL zooming with pl110 (cf. d3ffcafe25b5966b351ea6100160c2156688f22f)Blue Swirl1-0/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-30e1000.c doesn't properly emulate EERD and ICS registersBill Paul1-4/+9
Once again, the emulation of the EERD and ICS registers in e1000.c is incorrect. Nobody has noticed this before because none of the Intel-written e1000 drivers use these registers, and all of the independently written open source drivers copy Intel's example, so they don't use them either. Regardless, these registers are documented in the programmer's manuals, and their emulated behavior doesn't match the verified behavior of real hardware, so any software that does use them doesn't function correctly. -Bill Signed-off-by: Bill Paul <wpaul@windriver.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-30qemu-option: fix parse_option_number().Gerd Hoffmann1-0/+1
It works much better when parse_option_number actually returns the number parsed ... Common breakage resulting from this bug is that 'qemu -hda foo.img -cdrom bar.iso' stops working (cdrom isn't there). Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-30qdev: convert all vga devices.Gerd Hoffmann3-81/+130
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-30qdev/core: add monitor command to list all driversGerd Hoffmann3-0/+14
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-30qdev: factor out qdev_print_devinfo.Gerd Hoffmann1-1/+18
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2025-01-20 08:41:49 +0000