aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-01-21PPC: Bamboo: fold ppc440.c and ppc440_bamboo.c into a single fileAlexander Graf5-131/+90
The separation of ppc440 and ppc440_bamboo makes some sense, since ppc440 is the SoC while ppc440_bamboo is the actual board. But the separation makes things harder for us for no good reason, so let's just fold them in together with each other. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: 4xx: Qdevify the 440 PCI host controllerAlexander Graf2-60/+74
Due to popular demand, this qdevifies the PCI host controller of 4xx SoCs the same way as e500. We have to introduce a small stub function for pci init that will be removed in a later patch, once we qdev'ified the board, to keep the build working. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: bamboo: fix whitespaceAlexander Graf1-3/+3
Tabs followed by spaces are a no-go. My editor shows it red, distracting me from actual work! :) Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: bamboo: remove old machine descriptionsAlexander Graf1-21/+1
Nobody needs to run bamboo in 0.12 compat mode. Remove the machine. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: Enable 440EP CPU targetAlexander Graf1-11/+5
Now that we have 440 TLB emulation, we can also support running the 440EP CPU target in system emulation mode. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: 440: Default to 440EP CPUAlexander Graf1-1/+1
Today we're exposing a Virtex 440 CPU to the guest despite the fact that we're telling the guest that we're running on a 440EP one in the device tree. So let's better default to a real 440EP to make things synced again. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: Bamboo: recompile device treeAlexander Graf2-81/+47
Recent dtc doesn't compile our dts anymore. Change all hex numbers to have 0x prefixes, indicate the old version and recompile using recent dtc. This doesn't change any semantics in the device tree. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: 440: Ignore invalid PCI IRQsAlexander Graf1-0/+4
When running a 440 target, we currently get invalid irq_num values (-1) which completely confuse the IRQ setting code. This is most likely due to the missing qdev conversion. While this shouldn't happen in the first place and should really rather be fixed by converting the target, I dislike segfaults. So for now, let's just print a warning and ignore invalid irq_num values. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: Bamboo: Set initial TLB entryAlexander Graf1-1/+26
Back in the day when the bamboo target got introduced, the initial TLB was dictated by KVM. TCG has been missing initial TLB values ever since, rendering the target unusable for TCG usage. This patch adds linear TLB maps the way Linux expects them, making the target work. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: Bamboo: Register CPU resetAlexander Graf1-6/+13
To be able to support CPU reset, we need to put all register initialization and initial state into a CPU reset hook instead of a function that is only called once on bootup. This is a preparation step for the initial TLB setting code and brings bamboo more in line with what e500 and virtex already do. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-21PPC: 440EP: Initialize timerAlexander Graf1-0/+1
When using TCG with a BookE PowerPC core, we need to explicitly initialize the BookE timers with the correct frequencies. This was missing for 440EP, since that code came from KVM and was never used with TCG. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-19Merge remote-tracking branch 'spice/spice.v47' into stagingAnthony Liguori1-1/+1
* spice/spice.v47: qxl: Slot sanity check in qxl_phys2virt() is off by one, fix
2012-01-19Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori4-4/+7
* stefanha/trivial-patches: Makefile: Remove generated headers on clean Makefile: Exclude tests/Makefile in unconfigured tree lm32: Fix mixup of uint32 and uint32_t tests: Silence gtester in Makefile qemu-tool: Fix mixup of int64 and int64_t
2012-01-19Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori16-371/+657
* qmp/queue/qmp: block: use proper qerrors in qmp_block_resize qerror: restore alphabetical order over qerrors qerror: add check-qerror.sh to verify alphabetical order qmp: Add missing gcc format attribute and fix format string qapi: Convert block_set_io_throttle qapi: Convert change qerror: Extend QERR_DEVICE_ENCRYPTED qapi: Introduce change-vnc-password monitor: expose readline state qapi: Convert eject block: eject_device(): Use error_set() qapi: Convert expire_password qapi: Convert set_password vnc: Simplify vnc_display_password()
2012-01-19Merge remote-tracking branch 'pmaydell/arm-devs.for-upstream' into stagingAnthony Liguori9-75/+193
* pmaydell/arm-devs.for-upstream: arm: make the number of GIC interrupts configurable hw/lan9118: Add save/load support arm: Remove incorrect comment in arm_timer vexpress, realview: Add (dummy) L2 cache controller
2012-01-19Merge remote-tracking branch 'kraxel/usb.37' into stagingAnthony Liguori25-471/+3973
* kraxel/usb.37: usb-redir: Improve some debugging messages usb-redir: Try to keep our buffer size near the target size usb-redir: Pre-fill our isoc input buffer before sending pkts to the host usb-redir: Dynamically adjust iso buffering size based on ep interval usb-redir: Clear iso / irq error when stopping the stream usb: link packets to endpoints not devices usb: add max_packet_size to USBEndpoint usb/debug: add usb_ep_dump usb-desc: USBEndpoint support usb: add ifnum to USBEndpoint usb: add USBEndpoint xhci: Initial xHCI implementation usb: add audio device model usb-desc: audio endpoint support usb: track altsetting in USBDevice usb: track configuration and interface count in USBDevice. usb-host: rip out legacy procfs support
2012-01-19Makefile: Remove generated headers on cleanAndreas Färber1-0/+1
Running `make distclean' followed by a new out-of-tree build would fail due to stale generated QMP headers in the tree. Commit 611b727374ad76fb0078ea65bc1387194913980e (Makefile: remove more generated files on clean) made sure generated sources are removed. Also remove generated headers introduced in commit e3193601c84558c303b1773379da76fce80c0a56 (qapi: use middle mode in QMP server). Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-19Makefile: Exclude tests/Makefile in unconfigured treeAndreas Färber1-0/+2
Since commit dbfe06c62ccedc5b64e1c6466445133dd50f6de1 (build: split unit test builds to a separate makefile fragment), in absence of config-host.mak an undefined $(SRC_PATH) breaks `make distclean' due to /tests/Makefile not being include'able. Fix by only including when config-host.mak is present. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-19lm32: Fix mixup of uint32 and uint32_tAndreas Färber1-1/+1
Commit d23948b15a9920fb7f6374b55a6db1ecff81f3ee (lm32: add Milkymist VGAFB support) introduced a stray usage of the softfloat uint32 type. Use uint32_t instead. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-19tests: Silence gtester in MakefileStefan Weil1-1/+1
This prettifies make output a little by avoiding a very long line. As gtester prints the checks when they are run, no information is lost. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-19qemu-tool: Fix mixup of int64 and int64_tAndreas Färber1-2/+2
Commit cbcfa0418f0c196afa765f5c9837b9344d1adcf3 (link the main loop and its dependencies into the tools) introduced stray usages of int64. Use int64_t instead. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-18block: use proper qerrors in qmp_block_resizeStefan Hajnoczi4-10/+37
Let's report specific errors so that management tools and users can identify the problem. Two new qerrors are needed: * QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM * QERR_DEVICE_IS_READ_ONLY for EACCES Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qerror: restore alphabetical order over qerrorsStefan Hajnoczi2-78/+78
Over time these must have gotten out of order. Put everything back in alphabetical order. This is purely a clean up. In practice nothing depends on the order. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qerror: add check-qerror.sh to verify alphabetical orderStefan Hajnoczi3-3/+24
We're supposed to keep qerror definitions and table entries in alphabetical order. In practice this is not checked. I haven't found a nice way to integrate this into the makefile yet but we can at least have this script which verifies that qerrors are in alphabetical order. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qmp: Add missing gcc format attribute and fix format stringStefan Weil1-3/+4
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert block_set_io_throttleLuiz Capitulino7-41/+60
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert changeLuiz Capitulino9-98/+181
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qerror: Extend QERR_DEVICE_ENCRYPTEDLuiz Capitulino3-3/+5
Include the name of the encrypted file. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Introduce change-vnc-passwordLuiz Capitulino3-0/+27
New QMP command to change the VNC password. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18monitor: expose readline stateAnthony Liguori2-3/+13
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to deal with HMP right now like readline support. Export it from the monitor so we can consume it in hmp.c. In short time, hmp.c will take over all of the readline bits. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert ejectLuiz Capitulino7-22/+39
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18block: eject_device(): Use error_set()Luiz Capitulino1-8/+22
Also drops the leftover 'mon' argument. This is a preparation for the next commits which will port the eject and change commands to the QAPI. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert expire_passwordLuiz Capitulino8-47/+80
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert set_passwordLuiz Capitulino7-63/+97
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18vnc: Simplify vnc_display_password()Luiz Capitulino3-12/+10
Drop the qerror_report() call from it and let its callers set the error themselves. This also allows for dropping the 'ret' variable. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-17qxl: Slot sanity check in qxl_phys2virt() is off by one, fixMarkus Armbruster1-1/+1
Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17arm: make the number of GIC interrupts configurableMark Langsdorf5-49/+87
Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020, and create a configurable property for each defaulting to 96 and 64 (respectively) so that device modelers can set the value appropriately for their SoC. Other ARM processors also set their maximum number of used IRQs appropriately. Set the maximum theoretical number of GIC interrupts to 1020 and update the save/restore code to only use the appropriate number for each SoC. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Reviewed-by: Andreas Färber <afaerber@suse.de> [Peter Maydell: fixed minor whitespace snafu] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-17hw/lan9118: Add save/load supportPeter Maydell1-23/+103
Implement save/load for the LAN9118. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-01-17arm: Remove incorrect comment in arm_timerMark Langsdorf1-3/+0
The current comment says that the arm_timers are restricted to between 32 KHz and 1 MHz, but sp804 TRM does not specify those limits. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-17vexpress, realview: Add (dummy) L2 cache controllerPeter Maydell2-0/+3
Instantiate the L2 cache controller on the ARM devboards which have one, since we have a dummy model of it now. Note that the only non-MP board with an L2x0 is the PB1176, which we don't model. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-17usb-redir: Improve some debugging messagesHans de Goede1-5/+8
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb-redir: Try to keep our buffer size near the target sizeHans de Goede1-3/+27
Before this patch we would allow the (iso) buffer to grow unlimited (and it would under certain circumstances) leading to way too high latencies for iso data streams. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb-redir: Pre-fill our isoc input buffer before sending pkts to the hostHans de Goede1-0/+16
This is something which should have been done from the first version of usb-redir, but wasn't. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb-redir: Dynamically adjust iso buffering size based on ep intervalHans de Goede1-5/+48
Note the bufpq_target_size id stored in the endpoint info struct, even though it only used once. This is done because it will be referenced from other code in a follow up patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb-redir: Clear iso / irq error when stopping the streamHans de Goede1-2/+4
And ignore status messages from the client which arrive after stream stop (the stream stop send to the client and an error status reported by the client my cross each other due to network latency). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb: link packets to endpoints not devicesGerd Hoffmann6-7/+22
Add USBEndpoint for the control endpoint to USBDevices. Link async packets to the USBEndpoint instead of the USBDevice. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb: add max_packet_size to USBEndpointGerd Hoffmann4-30/+44
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb/debug: add usb_ep_dumpGerd Hoffmann3-0/+44
Add function to dump endpoint data, for debugging purposes. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb-desc: USBEndpoint supportGerd Hoffmann1-0/+22
Initialize USBEndpoint structs from USBDesc* data. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17usb: add ifnum to USBEndpointGerd Hoffmann3-0/+18
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.1 at 2025-02-05 10:21:33 +0000