aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-05-30xhci: add usage info to docsGerd Hoffmann1-0/+15
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-30vnc: fix segfault in vnc_display_pw_expire()Gerd Hoffmann1-0/+4
NULL pointer dereference in case no vnc server is configured. Catch this and return -EINVAL like vnc_display_password() does. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-30Expose CPUID leaf 7 only for -cpu hostEduardo Habkost2-7/+17
Changes v2 -> v3; - Check for kvm_enabled() before setting cpuid_7_0_ebx_features Changes v1 -> v2: - Use kvm_arch_get_supported_cpuid() instead of host_cpuid() on cpu_x86_fill_host(). We should use GET_SUPPORTED_CPUID for all bits on "-cpu host" eventually, but I am not changing all the other CPUID leaves because we may not be able to test such an intrusive change in time for 1.1. Description of the bug: Since QEMU 0.15, the CPUID information on CPUID[EAX=7,ECX=0] is being returned unfiltered to the guest, directly from the GET_SUPPORTED_CPUID return value. The problem is that this makes the resulting CPU feature flags unpredictable and dependent on the host CPU and kernel version. This breaks live-migration badly if migrating from a host CPU that supports some features on that CPUID leaf (running a recent kernel) to a kernel or host CPU that doesn't support it. Migration also is incorrect (the virtual CPU changes under the guest's feet) if you migrate in the opposite direction (from an old CPU/kernel to a new CPU/kernel), but with less serious consequences (guests normally query CPUID information only once on boot). Fortunately, the bug affects only users using cpudefs with level >= 7. The right behavior should be to explicitly enable those features on [cpudef] config sections or on the "-cpu" command-line arguments. Right now there is no predefined CPU model on QEMU that has those features: the latest Intel model we have is Sandy Bridge. I would like to get this fixed on 1.1, so I am submitting this patch, that enables those features only if "-cpu host" is being used (as we don't have any pre-defined CPU model that actually have those features). After 1.1 is released, we can make those features properly configurable on [cpudef] and -cpu configuration. One problem is: with this patch, users with the following setup: - Running QEMU 1.0; - Using a cpudef having level >= 7; - Running a kernel that supports the features on CPUID leaf 7; and - Running on a CPU that supports some features on CPUID leaf 7 won't be able to live-migrate to QEMU 1.1. But for these users live-migration is already broken (they can't live-migrate to hosts with older CPUs or older kernels, already), I don't see how to avoid this problem. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29pci: call object_unparent() before free_qdev()Amos Kong2-1/+1
Start VM with 8 multiple-function block devs, hot-removing those block devs by 'device_del ...' would cause qemu abort. | (qemu) device_del virti0-0-0 | (qemu) ** |ERROR:qom/object.c:389:object_delete: assertion failed: (obj->ref == 0) It's a regression introduced by commit 57c9fafe The whole PCI slot should be removed once. Currently only one func is cleaned in pci_unplug_device(), if you try to remove a single func by monitor cmd. free_qdev() are called for all functions in slot, but unparent_delete() is only called for one function. Signed-off-by: XXXX Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29fix multiboot loading if load_end_addr == 0Scott Moser1-3/+9
The previous multiboot load code did not treat the case where load_end_addr was 0 specially. The multiboot specification says the following: * load_end_addr Contains the physical address of the end of the data segment. (load_end_addr - load_addr) specifies how much data to load. This implies that the text and data segments must be consecutive in the OS image; this is true for existing a.out executable formats. If this field is zero, the boot loader assumes that the text and data segments occupy the whole OS image file. Signed-off-by: Scott Moser <smoser@ubuntu.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29vga: fix vram double-mapping with -vga std and -M pc-0.12Avi Kivity2-1/+7
With pc-0.12, we map the video RAM both through the PCI BAR (the guest does this) and through a fixed mapping at 0xe0000000. The memory API doesn't allow this double map, and aborts. Fix by using an alias. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29Merge remote-tracking branch 'afaerber-or/cocoa-for-upstream' into stagingAnthony Liguori2-1/+6
* afaerber-or/cocoa-for-upstream: cocoa: Suppress Cocoa frontend for -qtest arch_init: Fix AltiVec build on Darwin/ppc
2012-05-29cocoa: Suppress Cocoa frontend for -qtestAndreas Färber1-1/+2
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-05-29arch_init: Fix AltiVec build on Darwin/ppcAndreas Färber1-0/+4
Commit f29a56147b66845914d0a645bf9b4c5bb9a6af57 (implement -no-user-config command-line option (v3)) introduced uses of bool in arch_init.c. Shortly before that usage is support code for AltiVec (conditional to __ALTIVEC__). GCC's altivec.h may in a !__APPLE_ALTIVEC__ code path redefine bool, leading to type mismatches. altivec.h recommends to #undef for C++ compatibility, but doing so in C leads to bool remaining undefined. Fix by redefining bool to _Bool as mandated for stdbool.h by POSIX. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-29Merge remote-tracking branch 'sstabellini/for_1.1_rc3' into stagingAnthony Liguori4-33/+56
* sstabellini/for_1.1_rc3: Call xc_domain_shutdown with the reboot flag when the guest requests a reboot. xen: Fix PV-on-HVM xen_disk: properly update stats in ioreq_release() xen_disk: use bdrv_aio_flush instead of bdrv_flush xen_disk: remove syncwrite option xen: disable rtc_clock xen: do not initialize the interval timer and PCSPK emulator
2012-05-29Merge remote-tracking branch 'mdroth/qga-pull-5-24-12' into stagingAnthony Liguori2-1/+24
* mdroth/qga-pull-5-24-12: qemu-ga: Fix missing environ declaration configure: check if environ is declared
2012-05-29Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori8-81/+159
* kwolf/for-anthony: fdc-test: introduced qtest no_media_on_start and cmos qtest for floppy fdc: fix media detection fdc: floppy drive should be visible after start without media qemu-iotests: mark 035 qcow2-only qcow2: Check qcow2_alloc_clusters_at() return value sheepdog: use heap instead of stack for BDRVSheepdogState sheepdog: return -errno on error sheepdog: mark image as snapshot when tag is specified qemu-img: Explain how rebase operation can be used to perform a 'diff' operation. qcow2: don't leak buffer for unexpected qcow_version in header
2012-05-29Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori3-17/+17
* kiszka/queues/slirp: slirp: Avoid redefining MAX_TCPOPTLEN slirp: Avoid statements without effect on Big Endian host slirp: Untangle TCPOLEN_* from TCPOPT_*
2012-05-29Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori3-40/+206
* bonzini/scsi-next: ISCSI: Switch to using READ16/WRITE16 for I/O to the LUN ISCSI: Only call READCAPACITY16 for SBC devices, use READCAPACITY10 for MMC ISCSI: get device type at connection time ISCSI: change num_blocks to 64-bit ISCSI: redo how we set up the events scsi: declare vmstate_info_scsi_requests to be static
2012-05-28slirp: Avoid redefining MAX_TCPOPTLENAndreas Färber1-0/+1
MAX_TCPOPTLEN is being defined as 32. Darwin already has it as 40, causing a warning. The value is only used to declare an array, into which currently 4 bytes are written at most. Therefore always override MAX_TCPOPTLEN for now. Suggested-by: Jan Kiszka <jan.kiszka@web.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-05-28slirp: Avoid statements without effect on Big Endian hostAndreas Färber1-12/+8
Darwin has HTON*/NTOH* macros that on BE simply return the argument. This is incompatible with SLIRP's use of these macros as a statement. Undefine the macros in the HOST_WORDS_BIGENDIAN code path to redefine these macros as no-op, as already done when they were undefined. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-05-28ISCSI: Switch to using READ16/WRITE16 for I/O to the LUNRonnie Sahlberg2-31/+85
This allows using LUNs bigger than 2TB. Keep using READ10 for other device types such as MMC. Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28ISCSI: Only call READCAPACITY16 for SBC devices, use READCAPACITY10 for MMCRonnie Sahlberg1-5/+59
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28ISCSI: get device type at connection timeRonnie Sahlberg1-2/+43
This is needed to avoid READ CAPACITY(16) for MMC devices. Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-28ISCSI: change num_blocks to 64-bitPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-28ISCSI: redo how we set up the eventsRonnie Sahlberg1-4/+21
Call qemu_notify_event() after updating events. Otherwise, If we add an event for -is-writeable but the socket is already writeable there may be a delay before the event callback is actually triggered. Those delays would in particular hurt performance during BIOS boot and when the GRUB bootloader reads the kernel and initrd. But first call out to the socket write functions directly, and only set up the write event if the socket is full. This will happen very rarely and this improves performance. Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28slirp: Untangle TCPOLEN_* from TCPOPT_*Andreas Färber1-5/+8
Commit b72210568ef0c0fb141a01cffb71a09c4efa0364 (slirp: clean up conflicts with system headers) enclosed TCPOLEN_MAXSEG with an #ifdef TCPOPT_EOL. This broke the build on illumos, which has TCPOPT_* but not TCPOLEN_*. Move them to their own #ifdef TCPOLEN_MAXSEG section to remedy this. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-05-27tcg/ppc: Handle _CALL_DARWIN being undefined on DarwinAndreas Färber1-6/+10
powerpc-apple-darwin9-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5577) does not define _CALL_DARWIN, leading to unexpected behavior w.r.t. register clobbering and stack frame layout. Since _CALL_DARWIN is a reserved identifier, define a custom TCG_TARGET_CALL_DARWIN based on either _CALL_DARWIN or __APPLE__. Signed-off-by: Andreas F?rber <andreas.faerber@web.de> Signed-off-by: malc <av1474@comtv.ru>
2012-05-25fdc-test: introduced qtest no_media_on_start and cmos qtest for floppyPavel Hrdina1-17/+48
As default a guest has always one floppy drive so 0x10 byte in CMOS has to have 0x40 value. Higher 4 bits means that the first floppy drive is 1.44 Mb 3"5 drive and lower 4 bits means the second drive is not present. After the guest starts DSKCHG bit in DIR register should be set. If there is no media in drive, this bit should be set all the time. Because we start the guest without media in drive, we have to swap 'eject' and 'change' in 'test_media_change'. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25fdc: fix media detectionPavel Hrdina1-6/+8
We have to set up 'media_changed' after guest start so floppy driver could detect that there is no media in drive. For this purpose we call 'fdctrl_change_cb' instead of 'fd_revalidate' in 'fdctrl_connect_drives'. 'fd_revalidate' is called inside 'fdctrl_change_cb'. We still have to set default drive geometry in 'fd_revalidate' even if there is no media in drive. When you try to open (windows) or mount (linux) floppy the driver tries to seek on track 1. Linux guest stuck in loop then kernel crashes and windows guest prints error message. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25fdc: floppy drive should be visible after start without mediaPavel Hrdina1-1/+1
If you start guest with floppy drive but without media inserted, guest still should see floppy drive pressent. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25qemu-iotests: mark 035 qcow2-onlyStefan Hajnoczi1-1/+1
The 035 parallel aio write test relies on knowledge of qcow2 metadata layout to stress parallel L2 table accesses. This only works for qcow2 unless we add additional calculations for qed or other formats. Mark this test as qcow2-only. Note that the test is strictly speaking non-deterministic although the output produced is reliable with qcow2. This is because the aio_write command returns before the aio write request has completed. Completions can occur at any time afterwards and cause a message to be printed. Therefore the exact output of this test is not deterministic but we seem to get away with it for qcow2 (maybe due to coroutine and main loop scheduling). Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25qcow2: Check qcow2_alloc_clusters_at() return valueKevin Wolf1-10/+13
When using qcow2_alloc_clusters_at(), the cluster allocation code checked the wrong variable for an error code. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25sheepdog: use heap instead of stack for BDRVSheepdogStateMORITA Kazutaka1-13/+22
bdrv_create() is called in coroutine context now, so we cannot use more stack than 1 MB in the function if we use ucontext coroutine. This patch allocates BDRVSheepdogState, whose size is 4 MB, on the heap in sd_create(). Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25sheepdog: return -errno on errorMORITA Kazutaka1-32/+46
On error, BlockDriver APIs should return -errno instead of -1. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25sheepdog: mark image as snapshot when tag is specifiedMORITA Kazutaka1-1/+1
When a snapshot tag is specified in the filename, the opened image is a snapshot. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25qemu-img: Explain how rebase operation can be used to perform a 'diff' ↵Richard W.M. Jones1-0/+18
operation. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25qcow2: don't leak buffer for unexpected qcow_version in headerJim Meyering1-1/+2
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25scsi: declare vmstate_info_scsi_requests to be staticJim Meyering1-1/+1
Signed-off-by: Jim Meyering <meyering@redhat.com>
2012-05-24qemu-ga: Fix missing environ declarationLuiz Capitulino1-1/+5
Commit 3674838cd05268954bb6473239cd7f700a79bf0f uses the environ global variable, but is relying on environ to be declared somewhere else. This worked for me because on F16 environ is declared in <unistd.h>, but that doesn't happen in OpenBSD for example, causing a build failure. This commit fixes the build error by declaring environ if it hasn't being declared yet. Also fixes a build warning due to a missing <sys/wait.h> include. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2012-05-24configure: check if environ is declaredLuiz Capitulino1-0/+19
Some systems may declare environ automatically, others don't. Check for it. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2012-05-24audio: Always call fini on exitJan Kiszka1-4/+8
Not only clean up enabled voices but any registered one. Backends like pulsaudio rely on unconditional fini handler invocations. This fixes "Memory pool destroyed but not all memory blocks freed!" warnings on VM shutdowns when pa is used and lockups of QEMU on shutdown as it got stuck on some pa-internal synchronization point. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: malc <av1474@comtv.ru>
2012-05-24es1370: Fix debug codeStefan Weil1-5/+6
When DEBUG_ES1370 is defined, the compiler shows these warnings: hw/es1370.c: In function ?es1370_update_voices?: hw/es1370.c:414: warning: format ?%d? expects type ?int?, but argument 3 has type ?size_t? hw/es1370.c: In function ?es1370_writel?: hw/es1370.c:582: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int? hw/es1370.c:592: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int? hw/es1370.c:609: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int? hw/es1370.c: In function ?es1370_readl?: hw/es1370.c:751: warning: suggest braces around empty body in an ?if? statement Fix the format strings and add the missing braces. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: malc <av1474@comtv.ru>
2012-05-22Update version for 1.1.0-rc3v1.1.0-rc3Anthony Liguori1-1/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21xen: Fix PV-on-HVMAnthony PERARD1-1/+4
In the context of PV-on-HVM under Xen, the emulated nics are supposed to be unplug before the guest drivers are initialized, when the guest write to a specific IO port. Without this patch, the guest end up with two nics with the same MAC, the emulated nic and the PV nic. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21qdev: Fix memory leakdunrong huang1-1/+5
The str allocated in visit_type_str was not freed. The visit_type_str function is an input visitor(<QMP/String/etc>-to-native) here, it will allocate memory for caller, so the caller is responsible for freeing the memory. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: dunrong huang <riegamaths@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio: check virtio_load return codeOrit Wassermann5-5/+27
Otherwise we crash on error. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: always enable VIRTIO_BLK_F_SCSIPaolo Bonzini4-7/+9
VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse* SCSI requests, not *execute* them. You could run QEMU with scsi=on and a file-backed disk, and QEMU would fail all SCSI requests even though it advertises VIRTIO_BLK_F_SCSI. Because we need to do this to fix a migration compatibility problem related to how QEMU is invoked by management, we must do this unconditionally even on older machine types. This more or less assumes that no one ever invoked QEMU with scsi=off. Here is how testing goes: - old QEMU, scsi=on -> new QEMU, scsi=on - new QEMU, scsi=on -> old QEMU, scsi=on - old QEMU, scsi=off -> new QEMU, scsi=on - new QEMU, scsi=off -> old QEMU, scsi=on ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine) - old QEMU, scsi=off -> new QEMU, scsi=off ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine) - old QEMU, scsi=on -> new QEMU, scsi=off ok, bug fixed - new QEMU, scsi=on -> old QEMU, scsi=off doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off) - new QEMU, scsi=off -> old QEMU, scsi=off broken by the patch Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: define VirtIOBlkConfPaolo Bonzini7-28/+32
We will have to add another field to the virtio-blk configuration in the next patch. Avoid a proliferation of arguments to virtio_blk_init. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: blockdev_mark_auto_del is transport-independentPaolo Bonzini2-1/+1
Move it from virtio_blk_exit_pci to virtio_blk_exit. This is included here because the next patch removes proxy->block. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: report non-zero status when failing SG_IO requestsPaolo Bonzini1-28/+23
Linux really looks only at scsi->errors for SG_IO requests; it does not look at the virtio request status at all. Because of this, when a SG_IO request is failed early with virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP), without writing hdr.status, it will look like a success to the guest. This is their bug, but we can make it safe for older guests now by forcing scsi->errors to have a non-zero value whenever a request has to be failed. But if we fix the bug in the guest driver, we will have another problem because QEMU returns VIRTIO_BLK_S_IOERR if the status is non-zero, and Linux translates that to -EIO. Rather, the guest should succeed the request and pass the non-zero status via the userspace-provided SG_IO structure. So, remove the case where virtio_blk_handle_scsi can return VIRTIO_BLK_S_IOERR. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21use an uint64_t for the max_sz parameter in load_image_targphysMark Langsdorf2-2/+3
Allow load_image_targphys to load files on systems with more than 2G of emulated memory by changing the max_sz parameter from an int to an uint64_t. Reviewed-by: Andreas F=E4rber <afaerber@suse.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21Merge remote-tracking branch 'mdroth/qga-pull-5-15-12' into stagingAnthony Liguori9-162/+174
* mdroth/qga-pull-5-15-12: qemu-ga: align versioning with QEMU_VERSION qemu-ga: fix segv after failure to open log file qemu-ga: guest-shutdown: use only async-signal-safe functions qemu-ga: guest-shutdown: become synchronous qemu-ga: guest-suspend: make the API synchronous qemu-ga: become_daemon(): reopen standard fds to /dev/null qemu-ga: make reopen_fd_to_null() public qemu-ga: guest-suspend-hybrid: don't emit a success response qemu-ga: guest-suspend-ram: don't emit a success response qemu-ga: guest-suspend-disk: don't emit a success response qemu-ga: guest-shutdown: don't emit a success response qemu-ga: don't warn on no command return qapi: add support for command options
2012-05-21tests: Add rtc-test (fix test regression)Stefan Weil1-1/+1
Commit 93e9eb6808c886f5f1c903b7ced1eed65de2ba39 added fdc-test, but accidentally removed rtc-test because check-qtest-i386-y was not enhanced but set twice. This patch adds rtc-test again (and sorts both tests alphabetically). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-19tests: Fix linker failure for fdc-testStefan Weil1-1/+1
When QEMU was built with the simple trace backend, linking failed: LINK tests/fdc-test oslib-posix.o: In function `trace_qemu_memalign': qemu/bin/debug/x86/./trace.h:31: undefined reference to `trace3' oslib-posix.o: In function `trace_qemu_vmalloc': qemu/bin/debug/x86/./trace.h:35: undefined reference to `trace2' oslib-posix.o: In function `trace_qemu_vfree': qemu/bin/debug/x86/./trace.h:39: undefined reference to `trace1' collect2: error: ld returned 1 exit status make: *** [tests/fdc-test] Fehler 1 Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-26 05:27:02 +0000