aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-11stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFGAlistair Francis4-0/+223
This patch adds the stm32f2xx System Configuration Controller. This is used to configure what memory is mapped at address 0 (although that is not supported) as well as configure how the EXTI interrupts work (also not supported at the moment). This device is not required for basic examples, but more complex systems will require it (as well as the EXTI device) Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_USART: Add the stm32f2xx USART ControllerAlistair Francis4-0/+304
This patch adds the stm32f2xx USART controller (UART also uses the same controller). Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_timer: Add the stm32f2xx TimerAlistair Francis4-0/+432
This patch adds the stm32f2xx timers: TIM2, TIM3, TIM4 and TIM5 to QEMU. Signed-off-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 155091a323390f8da3cca496e4c611c493e62a77.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11hw/arm/virt: fix cmdline parsing bug with CPU options and smp > 1Ard Biesheuvel1-1/+3
The recently introduced feature that allows 32 bit guests to be executed under KVM on a 64-bit host incorrectly handles the case where more than 1 cpu is specified using '-smp N' For instance, this invocation of qemu qemu-system-aarch64 -M virt -cpu cortex-a57,aarch64=off -smp 2 produces the following error qemu-system-aarch64: Expected key=value format, found aarch64 which is caused by the destructive parsing performed by cpu_common_parse_features(), resulting in subsequent attempts to parse the CPU option string (for each additional CPU) to fail. So duplicate the string before parsing it, and free it directly afterwards. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1425402380-10488-1-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into ↵Peter Maydell8-94/+78
staging X86 patches queued in the last few weeks. Mostly code cleanup and changes on code assigning APIC ID. # gpg: Signature made Mon Mar 9 20:40:38 2015 GMT using RSA key ID 984DC5A6 # gpg: Can't check signature: public key not found * remotes/ehabkost/tags/x86-pull-request: target-i386: Require APIC ID to be explicitly set before CPU realize target-i386: Move APIC ID compatibility code to pc.c target-i386: Move CPUX86State::cpuid_apic_id to X86CPU::apic_id target-i386: Remove unused APIC ID default code target-i386: Eliminate unnecessary get_cpuid_vendor() function target-i386: Simplify listflags() function target-i386: Move topology.h to include/hw/i386 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into ↵Peter Maydell13-323/+463
staging qemu-sparc update # gpg: Signature made Tue Mar 10 13:39:51 2015 GMT using RSA key ID AE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" * remotes/mcayland/tags/qemu-sparc-signed: sun4u: switch m48t59 NVRAM to MMIO access MAINTAINERS: add myself as SPARC maintainer doc: minor updates to SPARC32 and SPARC64 documentation m48t59: add m48t59 sysbus device m48t59: introduce new base-year qdev property m48t59: let init functions return a Nvram object m48t59: add a Nvram interface m48t59: register a QOM type for each nvram type we support m48t59: move ISA ports/memory regions registration to QOM constructor Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20150310-1' into ↵Peter Maydell5-16/+18
staging vnc bugfixes. # gpg: Signature made Tue Mar 10 10:37:51 2015 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vnc-20150310-1: Fix crash when connecting to VNC through websocket vnc: -readconfig fix vnc: set id at parse time not init time Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell19-75/+152
- scsi: improvements to error reporting and conversion to realize, Coverity/sparse fix for iscsi driver - RCU fallout: fix -daemonize and s390x system emulation - KVM: kvm_stat improvements and new man page - x86: SYSRET fix for VxWorks # gpg: Signature made Tue Mar 10 10:18:45 2015 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: x86: fix SS selector in SYSRET scsi: Convert remaining PCI HBAs to realize() scsi: Improve error reporting for invalid drive property hw: Propagate errors through qdev_prop_set_drive() scsi: Clean up duplicated error in legacy if=scsi code cpus: initialize cpu->memory_dispatch rcu: handle forks safely qemu-thread: do not use PTHREAD_MUTEX_ERRORCHECK kvm_stat: add kvm_stat.1 man page kvm_stat: add column headers to text UI iscsi: Fix check for username Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell85-822/+2675
Block patches for 2.3 # gpg: Signature made Tue Mar 10 13:03:17 2015 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (73 commits) MAINTAINERS: Add jcody as blockjobs, block devices maintainer iotests: add O_DIRECT alignment probing test block/raw-posix: fix launching with failed disks MAINTAINERS: Add jsnow as IDE maintainer sheepdog: Fix misleading error messages in sd_snapshot_create() Add testcase for scsi-hd devices without drive property scsi-hd: fix property unset case block/vdi: Add locking for parallel requests iotests: Drop vpc from 004's and 104's format list iotests: Remove 006 iotests: Fix 051's reference output virtio-blk: Remove the stale FIXME comment tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c sheepdog: fix confused return values qtest/ahci: add fragmented dma test qtest/ahci: Add PIO and LBA48 tests qtest/ahci: Add DMA test variants libqos/ahci: add ahci command helpers qtest/ahci: Add a macro bootup routine ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10MAINTAINERS: Add jcody as blockjobs, block devices maintainerJeff Cody1-0/+43
The block layer maintainership is being split up into smaller, more manageable pieces. I propose that I take over / assist with the following areas: * blockjobs * archipelago * curl * gluster * nfs * rbd * sheepdog * ssh * vhdx As John Snow noted in a different patch: As we split out the block layer, we will begin using the qemu-block mailing list as a catchall for all of the block layer subcomponents. Please CC qemu-block@nongnu.org for all block layer patches, including any that touch the above listed areas. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10iotests: add O_DIRECT alignment probing testStefan Hajnoczi3-0/+88
This test case checks that image files can be opened even if I/O produces EIO errors. QEMU should not refuse opening failed disks since the guest may be configured for multipath I/O where accessing failed disks is expected. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10block/raw-posix: fix launching with failed disksStefan Hajnoczi1-2/+27
Since commit c25f53b06eba1575d5d0e92a0132455c97825b83 ("raw: Probe required direct I/O alignment") QEMU has failed to launch if image files produce I/O errors. Previously, QEMU would launch successfully and the guest would see the errors when attempting I/O. This is a regression and may prevent multipath I/O inside the guest, where QEMU must launch and let the guest figure out by itself which disks are online. Tweak the alignment probing code in raw-posix.c to explicitly look for EINVAL on Linux instead of bailing. The kernel refuses misaligned requests with this error code and other error codes can be ignored. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10MAINTAINERS: Add jsnow as IDE maintainerJohn Snow1-3/+17
It has been proposed that the block layer be split up into smaller, more manageable portions to help speed up the review and merging of block layer patches. As part of this process, I propose that I take over the IDE, ATA, ATAPI and FD devices. As we split out the block layer, we will begin using the qemu-block mailing list as a catchall for all of the block layer subcomponents. Please CC qemu-block@nongnu.org for all block layer patches, including any that touch the IDE/Floppy devices. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10sheepdog: Fix misleading error messages in sd_snapshot_create()Markus Armbruster1-3/+2
If do_sd_create() fails, it first reports the error returned, then reports a another one with strerror(errno). errno is meaningless at that point. Report just one error combining the valid information from both messages. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Liu Yuan <namei.unix@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10Add testcase for scsi-hd devices without drive propertyChristian Borntraeger2-0/+14
Lets add a test for scsi devices without a drive. This was broken by a recent block patch, thus indicating that we need a testcase. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10scsi-hd: fix property unset caseEkaterina Tumanova1-1/+6
Commit c53659f0 ("BlockConf: Call backend functions to detect geometry and blocksizes") causes a segmentation fault on the invalid configuration of a scsi device without a drive. Let's check for conf.blk before calling blkconf_blocksizes. The error will be handled later on in scsi_realize anyway. Reported-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10block/vdi: Add locking for parallel requestsMax Reitz1-0/+25
When allocating a new cluster, the first write to it must be the one doing the allocation, because that one pads its write request to the cluster size; if another write to that cluster is executed before it, that write will be overwritten due to the padding. See https://bugs.launchpad.net/qemu/+bug/1422307 for what can go wrong without this patch. Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10iotests: Drop vpc from 004's and 104's format listMax Reitz2-2/+2
Both tests require the test image to have a specific size; this cannot be guaranteed by vpc (unless tuning the test specifically for that format). It is safe to exclude vpc from 004 because what is tested there is implemented in a generic part in the block layer and not format-specific. It is safe to exclude vpc from 104 because for vpc basically every image size is "unaligned", so if that would break at some point in time, we would quickly notice just by running the generic tests. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10iotests: Remove 006Max Reitz3-61/+1
vpc does support images > 127 GB if done correctly. qemu does it correctly. Remove the test pretending otherwise. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10iotests: Fix 051's reference outputMax Reitz1-6/+3
Commit c4bacafb717de55538311b80a185ce9166b8daa2 changed (improved) qdev_init_nofail()'s error reporting, which affects iotest 051. Fix the reference output. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10virtio-blk: Remove the stale FIXME commentFam Zheng1-6/+0
By default, we have ioeventfd enabled, so the IO request processing is in IO thread; in the vcpu thread, guest mode is returned to as quickly as possible, and completion is delivered via irqfd. Therefore this comment from the initial implementation is barely relevant. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk testMarc Marí1-46/+52
Check the QVIRTIO_F_ANY_LAYOUT flag before performing operations with 2 descriptor layout. This is to follow the specification strictly. This patch depends on: [PATCH v5 0/5] libqos: Virtio MMIO driver Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Message-id: 1424815154-27243-1-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.cMarc Marí1-4/+12
The MSIX interrupt was always acked without checking its value, which caused a race condition. If the ISR was raised between the read and the acking, the ISR was never detected and it timed out. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com> Tested-by: John Snow <jsnow@redhat.com> Message-id: 1424795655-16952-1-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10sheepdog: fix confused return valuesLiu Yuan1-0/+11
These functions mix up -1 and -errno in return values and would might cause trouble error handling in the call chain. This patch let them return -errno and add some comments. Cc: qemu-devel@nongnu.org Cc: Markus Armbruster <armbru@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Yuan <liuyuan@cmss.chinamobile.com> Message-id: 1424231875-7131-1-git-send-email-namei.unix@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ahci: add fragmented dma testJohn Snow1-0/+59
Test what happens when we try to use extremely short PRDTs to accomplish a small data transfer. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ahci: Add PIO and LBA48 testsJohn Snow1-22/+134
In addition to DMA tests, test PIO and LBA48 command pathways in AHCI. To accomplish this, a primitive multiplexer for gtest is added. Though guests may prefer not to issue PIO commands directly except for single sector cases during early boot and shutdown, these pathways are still used for the transfer of ATAPI commands as well, and should be behaving well. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ahci: Add DMA test variantsJohn Snow1-6/+28
These test a few different pathways in the AHCI code. short: Test the minimum transfer size, exactly one sector. simple: Test a transfer using a single PRD, in this case, 4K. double: Test transferring 8K, which we will split up as two PRDs. long: Test transferring a lot of data using many PRDs, 256K. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos/ahci: add ahci command helpersJohn Snow2-0/+47
ahci_command_set_flags: Set additional flags in the command header. ahci_command_clr_flags: Clear flags from the command header. ahci_command_set_offset: Change the IO sector from 0. ahci_command_adjust: Adjust many values simultaneously. To be used to adjust the command header if the default values/guesses were incorrect or undesirable. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> [ kwolf: Fixed conflicting prototype for ahci_command_adjust() ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ahci: Add a macro bootup routineJohn Snow1-6/+17
Add a routine that can be used to engage the AHCI device at a not-granular level so that bringing up the functionality of the HBA is easy in future tests that are not concerned with testing the bring-up process. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos/ahci: Zero-fill AHCI headersJohn Snow1-1/+1
Even though it's just the reserved space, make sure they're zeroes. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ide: Test flush / retry for ISA and PCIJohn Snow1-5/+15
This patch adds tests for werror and rerror functionality for the PCI and ISA ide buses. Tests for the AHCI device are to be included at a later date after requisite patches have been merged upstream to support needed functionality by the tests. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1424708286-16483-18-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ahci: Recompute cur_cmd on migrate post loadJohn Snow1-0/+7
When the AHCI HBA device is migrated, all of the information that led to the request being created is stored in the AHCIDevice structures, except for pointers into guest data where return information needs to be stored. The "cur_cmd" field is usually responsible for this. To rebuild the cur_cmd pointer post-migration, we can utilize the busy_slot index to figure out where the command header we are still processing is. This allows a machine in a halted state from rerror=stop or werror=stop to be migrated and resume operations without issue. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-17-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ahci: add support for restarting non-queued commandsPaolo Bonzini1-8/+15
This is easy, since start_dma already restarts processing from the beginning of the PRDT. Migration is also easy to cover; the comment about busy_slot is wrong, busy_slot will only be set if there is an error. In this case we have nothing to do really. The core IDE code will restart the operation and command list processing will proceed after the erroring command has been completed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-16-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ahci: Migrate IDEStatusJohn Snow2-0/+4
Amazingly, we weren't doing this before. Make sure we migrate the IDEState structure that belongs to the AHCIDevice.IDEBus structure during migrations. No version numbering changes because AHCI is not officially migratable (and we can all see with good reason why) so we do not impact any official builds by altering the stream and leaving it at version 1. This fixes the rerror=stop/werror=stop test case where we wish to migrate a halted job. Previously, the error code would not migrate, so even if the job completed successfully, AHCI would report an error because it would still have the placeholder error code from initialization time. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: support PIO restart for the ISA controllerPaolo Bonzini1-1/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-14-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: make more functions staticPaolo Bonzini2-8/+8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: commonize io_buffer_index initializationPaolo Bonzini2-4/+2
Resetting the io_buffer_index to 0 is commonized, with the exception of the case within ide_atapi_cmd_reply, where we need to reset this index to 0 prior to the ide_atapi_cmd_reply_end call. Note that not all calls to ide_atapi_cmd_reply_end expect the index to be 0, so setting it there is not appropriate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: migrate initial request state via IDEBusPaolo Bonzini1-1/+4
This only breaks backwards migration compatibility if the bus is in an error state. It is in principle possible to avoid this by making two subsections (one for version 1, and one for version 2, but with the same name) with different "_needed" callbacks. The v1 callback would return true if error_status != 0 and the bus is PATA; the v2 callback would return true if error_status != 0 and the bus is AHCI. Forward migration keeps working. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: place initial state of the current request to IDEBusPaolo Bonzini4-12/+16
This moves more common restarting logic to the core IDE code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: replace set_unit callback with more IDEBus statePaolo Bonzini6-26/+15
Start moving the initial state of the current request to IDEBus, so that AHCI can use it. The set_unit callback is not used anymore once this is done. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: remove restart_cb callbackPaolo Bonzini4-16/+0
With restarts now handled by ide_restart_cb and the IDEDMAOps.restart_dma() member, remove the old restart_cb callback. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: move restart callback to common codePaolo Bonzini4-81/+81
With BMDMA specific excised from the restart functions, create a HBA-agnostic restart callback to be shared between the different HBAs. Change the callback registered with the vmstate_change handler to always point to ide_restart_cb instead of relying on the IDEDMAOps.restart_cb() member. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: pass IDEBus to the restart_cbPaolo Bonzini2-6/+6
Pass the containing IDEBus to the restart_cb instead of the more specific BMDMAState child. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: do not use BMDMA in restart callbackPaolo Bonzini1-3/+3
Whenever an error stops the VM, ide_handle_rw_error does "s->bus->dma->unit = s->unit". So we can just use idebus_active_if. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: introduce ide_register_restart_cbPaolo Bonzini5-6/+9
A helper is added that registers the IDEDMAOp .restart_cb() via qemu_add_vm_change_state_handler instead of requiring each HBA to register the callback themselves. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: prepare to move restart to common codePaolo Bonzini2-5/+8
This patch adds the restart_dma callback and adjusts the ide_restart_dma function to utilize this callback to call the BMDMA-specific restart code instead of statically executing BMDMA-specific code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: start extracting ide_restart_dma out of bmdma_restart_dmaPaolo Bonzini1-10/+18
This patch begins refactoring the restart dma functions out of bmdma to be shared with AHCI and other future IDE HBA implementations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10BlockConf: Call backend functions to detect geometry and blocksizesEkaterina Tumanova10-6/+46
geometry: hd_geometry_guess function autodetects the drive geometry. This patch adds a block backend call, that probes the backing device geometry. If the inner driver method is implemented and succeeds (currently only for DASDs), the blkconf_geometry will pass-through the backing device geometry. Otherwise will fallback to old logic. blocksize: This patch initializes blocksize properties to 0. In order to set the property a blkconf_blocksizes was introduced. If user didn't set physical or logical blocksize, it will retrieve its value from a driver (only succeeds for DASD), otherwise it will set default 512 value. The blkconf_blocksizes call was added to all users of BlkConf. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10block-backend: Add wrappers for blocksizes and geometry probingEkaterina Tumanova2-0/+12
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-5-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10block: Add driver methods to probe blocksizes and geometryEkaterina Tumanova2-0/+115
Introduce driver methods of defining disk blocksizes (physical and logical) and hard drive geometry. Methods are only implemented for "host_device". For "raw" devices driver calls child's method. For now geometry detection will only work for DASD devices. To check that a local check_for_dasd function was introduced. It calls BIODASDINFO2 ioctl and returns its rc. Blocksizes detection function will probe sizes for DASD devices. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-4-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-12-25 08:37:21 +0000