aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-10-28vmdk: Fix use of uninitialised valueKevin Wolf1-1/+1
In error cases, cid is never set. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28ide: Fix off-by-one error in array index checkKevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-28qcow: Fix bdrv_write_compressed error handlingKevin Wolf1-11/+19
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-28block: Fix bdrv_open use after freeKevin Wolf1-1/+1
tmp_filename was used outside the block it was defined in, i.e. after it went out of scope. Move its declaration to the top level. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28block: Remove dead codeKevin Wolf1-5/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28qcow2: fix some errors and typo in qcow2.txtZhi Yong Wu1-3/+3
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28Teach block/vdi about "discarded" (no longer allocated) blocksEric Sunshine1-9/+14
An entry in the VDI block map will hold an offset to the actual block if the block is allocated, or one of two specially-interpreted values if not allocated. Using VirtualBox terminology, value VDI_IMAGE_BLOCK_FREE (0xffffffff) represents a never-allocated block (semantically arbitrary content). VDI_IMAGE_BLOCK_ZERO (0xfffffffe) represents a "discarded" block (semantically zero-filled). block/vdi knows only about VDI_IMAGE_BLOCK_FREE. Teach it about VDI_IMAGE_BLOCK_ZERO. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28Documentation: Add iSCSI sectionRonnie Sahlberg1-0/+42
Add new section for device URL syntax for special files and describe the iSCSI URL with examples Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28iSCSI block driverRonnie Sahlberg4-0/+629
This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-27Merge branch 'rth/vis2' of git://repo.or.cz/qemu/rthBlue Swirl11-1043/+1400
* 'rth/vis2' of git://repo.or.cz/qemu/rth: target-sparc: Implement FALIGNDATA inline. target-sparc: Implement BMASK/BSHUFFLE. target-sparc: Implement ALIGNADDR* inline. target-sparc: Implement EDGE* instructions. target-sparc: Implement fpack{16,32,fix}. target-sparc: Implement PDIST. target-sparc: Do exceptions management fully inside the helpers. target-sparc: Change fpr representation to doubles. target-sparc: Undo cpu_fpr rename. target-sparc: Extract float128 move to a function. target-sparc: Extract common code for floating-point operations. target-sparc: Make FPU/VIS helpers const when possible. target-sparc: Pass float64 parameters instead of dt0/1 temporaries. target-sparc: Add accessors for double-precision fpr access. target-sparc: Mark fprs dirty in store accessor. target-sparc: Add accessors for single-precision fpr access.
2011-10-27Merge branch 'target-arm.for-upstream' of ↵Andrzej Zaborowski8-12/+760
git://git.linaro.org/people/pmaydell/qemu-arm
2011-10-26target-sparc: Implement FALIGNDATA inline.Richard Henderson3-19/+26
This is a relatively simple sequence of shifts. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement BMASK/BSHUFFLE.Richard Henderson3-4/+40
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement ALIGNADDR* inline.Richard Henderson3-14/+22
While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not implemeneted at all. However, this is a very simple operation so we're better off doing this inline. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement EDGE* instructions.Richard Henderson1-2/+175
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement fpack{16,32,fix}.Richard Henderson3-1/+96
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement PDIST.Richard Henderson3-2/+41
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Do exceptions management fully inside the helpers.Richard Henderson3-91/+146
This reduces the size of the individual translation blocks, since we only emit a single call for each FOP rather than three. In addition, clear_float_exceptions expands inline to a single byte store. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Change fpr representation to doubles.Richard Henderson8-211/+202
This allows a more efficient representation for 64-bit hosts. It should be about the same for 32-bit hosts, as we can still access the individual pieces of the double. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Undo cpu_fpr rename.Richard Henderson1-28/+28
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Extract float128 move to a function.Richard Henderson1-32/+18
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Extract common code for floating-point operations.Richard Henderson1-454/+381
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Make FPU/VIS helpers const when possible.Richard Henderson4-92/+78
This also removes the unused ENV parameter from these helpers. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Pass float64 parameters instead of dt0/1 temporaries.Richard Henderson6-449/+381
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Add accessors for double-precision fpr access.Richard Henderson1-112/+130
Begin using i64 quantities to manipulate double-precision values. On a 64-bit host this will, for the moment, generate less efficient code; on a 32-bit host code quality should be largely unchanged. Code quality for 64-bit will be adjusted with a subsequent patch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Mark fprs dirty in store accessor.Richard Henderson1-46/+8
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Add accessors for single-precision fpr access.Richard Henderson1-195/+337
Load, store, and "create destination". This version attempts to change the behaviour of the translator as little as possible. We previously used cpu_tmp32 as the temporary destination, and we continue to use that. This will eventually allow a change in representation of the fprs. Change the name of the cpu_fpr array to make certain that all instances are converted. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26Sparc: split load and store op helpersBlue Swirl3-2418/+2437
Move load and store op helpers top ldst_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert win_helper to trace frameworkBlue Swirl2-22/+16
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert interrupt helpers to trace frameworkBlue Swirl3-26/+23
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert mmu_helper to trace frameworkBlue Swirl2-44/+30
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: split MMU helpersBlue Swirl4-861/+880
Move MMU helpers to mmu_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: fix coding style in helper.cBlue Swirl1-43/+52
Before the next patch, fix coding style of the areas affected. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: avoid AREG0 for division op helpersBlue Swirl4-82/+88
Make [su]div{,cc} helpers take a parameter for CPUState instead of relying on global env. Move the functions to helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: avoid AREG0 for softint op helpers and Leon cache controlBlue Swirl6-107/+117
Make softint op helpers and Leon cache irq manager take a parameter for CPUState instead of relying on global env. Move the functions to int{32,64}_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: avoid AREG0 for CWP and PSTATE helpersBlue Swirl4-201/+90
Make CWP and PSTATE helpers take a parameter for CPUState instead of relying on global env. Remove wrapper functions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori36-292/+524
2011-10-25main-loop: Add missing include fileStefan Weil1-25/+5
stdint.h defines the POSIX data types and is needed for MinGW-w64 (and maybe other hosts). v2: Instead of adding stdint.h directly, qemu-common.h is now included and duplicate include statements were removed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-25target-sparc: Fix use of g_new0 / g_freeStefan Weil1-4/+4
g_malloc0 needs g_free instead of free. While fixing this, I also replaced g_malloc0 by g_new0 as was suggested by Stuart Brady. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-25target-sparc: Fix order of function parametersStefan Weil1-4/+4
The MinGW-w64 gcc complains about wrong parameters for gen_helper_fpadd16_s and three other functions. gen_helper_fpadd16_s is declared like this (hidden in lots of macros): static inline void gen_helper_fpadd16s(TCGv_i32 retval, TCGv_ptr arg1, TCGv_i32 arg2, TCGv_i32 arg3); So it looks like cpu_env should be the 2nd parameter. Please review this patch as I have no environment to test it (maybe the 1st parameter should be cpu_dst?). Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-25hda: do not mix output and input stream states, RHBZ #740493Marc-André Lureau3-12/+25
Windows 7 may use the same stream number for input and output. Current code will confuse streams. Changes since v1: - keep running_compat[] for migration version 1 - add running_real[] for migration version 2 Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2011-10-25hda: do not mix output and input streams, RHBZ #740493Marc-André Lureau1-4/+5
Windows 7 may use the same stream number for input and output. That will result in lot of garbage on playback. The hardcoded value of 4 needs to be in sync with GCAP streams description and IN/OUT registers. Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2011-10-24Merge remote-tracking branch 'bonzini/split-main-loop-for-anthony' into stagingAnthony Liguori23-1060/+1309
2011-10-23Add stdio char device on windowsFabien Chouteau1-2/+225
Simple implementation of an stdio char device on Windows. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: split CWP and PSTATE op helpersBlue Swirl4-491/+524
Move CWP and PSTATE op helpers to win_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: avoid AREG0 for lazy condition code helpersBlue Swirl5-50/+49
Make lazy condition code helpers take a parameter for CPUState instead of relying on global env. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: split lazy condition code handling op helpersBlue Swirl3-466/+488
Move lazy condition code handling op helpers to cc_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: avoid AREG0 for float and VIS opsBlue Swirl5-274/+281
Make floating point and VIS ops take a parameter for CPUState instead of relying on global env. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: split FPU and VIS op helpersBlue Swirl4-745/+800
Move FPU op helpers to fop_helper.c. Move VIS op helpers to vis_helper.c, compile it only for Sparc64. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: fix coding styleBlue Swirl1-452/+502
Before the next patches, fix coding style of the areas affected. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2025-02-07 01:56:17 +0000