aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-03-07roms/openbios: update OpenBIOS images to 0e0afae6 built from submoduleMark Cave-Ayland4-0/+0
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-07Merge remote-tracking branch ↵Peter Maydell29-195/+1499
'remotes/hreitz-gitlab/tags/pull-block-2022-03-07' into staging Block patches for 7.0-rc0: - New fleecing backup scheme - iotest fixes - Fixes for the curl block driver - Fix for the preallocate block driver - IDE fix for zero-length TRIM requests # gpg: Signature made Mon 07 Mar 2022 10:33:31 GMT # gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF # gpg: issuer "hreitz@redhat.com" # gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF * remotes/hreitz-gitlab/tags/pull-block-2022-03-07: (23 commits) iotests/image-fleecing: test push backup with fleecing iotests/image-fleecing: add test case with bitmap iotests.py: add qemu_io_pipe_and_status() iotests/image-fleecing: add test-case for fleecing format node block: copy-before-write: realize snapshot-access API block: introduce snapshot-access block driver block/io: introduce block driver snapshot-access API block/reqlist: add reqlist_wait_all() block/dirty-bitmap: introduce bdrv_dirty_bitmap_status() block/reqlist: reqlist_find_conflict(): use ranges_overlap() block: intoduce reqlist block/block-copy: add block_copy_reset() block/copy-before-write: add bitmap open parameter block/block-copy: block_copy_state_new(): add bitmap parameter block/dirty-bitmap: bdrv_merge_dirty_bitmap(): add return value block/block-copy: move copy_bitmap initialization to block_copy_state_new() iotests: Write test output to TEST_DIR tests/qemu-iotests/testrunner: Quote "case not run" lines in TAP mode tests/qemu-iotests/040: Skip TestCommitWithFilters without 'throttle' block: fix preallocate filter: don't do unaligned preallocate requests ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-07iotests/image-fleecing: test push backup with fleecingVladimir Sementsov-Ogievskiy2-32/+156
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-17-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07iotests/image-fleecing: add test case with bitmapVladimir Sementsov-Ogievskiy2-9/+113
Note that reads zero areas (not dirty in the bitmap) fails, that's correct. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-16-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07iotests.py: add qemu_io_pipe_and_status()Vladimir Sementsov-Ogievskiy1-0/+3
Add helper that returns both status and output, to be used in the following commit Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-15-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07iotests/image-fleecing: add test-case for fleecing format nodeVladimir Sementsov-Ogievskiy2-19/+119
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-14-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block: copy-before-write: realize snapshot-access APIVladimir Sementsov-Ogievskiy2-1/+435
Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block: introduce snapshot-access block driverVladimir Sementsov-Ogievskiy5-1/+143
The new block driver simply utilizes snapshot-access API of underlying block node. In further patches we want to use it like this: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] This way, NBD client will be able to read snapshotted state of active disk, when active disk is continued to be written by guest. This is known as "fleecing", and currently uses another scheme based on qcow2 temporary image which backing file is active-disk. New scheme comes with benefits - see next commit. The other possible application is exporting internal snapshots of qcow2, like this: [guest] [NBD export] | | | root | root v file v [qcow2]<---------[snapshot-access] For this, we'll need to implement snapshot-access API handlers in qcow2 driver, and improve snapshot-access block driver (and API) to make it possible to select snapshot by name. Another thing to improve is size of snapshot. Now for simplicity we just use size of bs->file, which is OK for backup, but for qcow2 snapshots export we'll need to imporve snapshot-access API to get size of snapshot. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com> [hreitz: Rebased on block GS/IO split] Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/io: introduce block driver snapshot-access APIVladimir Sementsov-Ogievskiy3-0/+99
Add new block driver handlers and corresponding generic wrappers. It will be used to allow copy-before-write filter to provide reach fleecing interface in further commit. In future this approach may be used to allow reading qcow2 internal snapshots, for example to export them through NBD. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com> [hreitz: Rebased on block GS/IO split] Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/reqlist: add reqlist_wait_all()Vladimir Sementsov-Ogievskiy2-0/+16
Add function to wait for all intersecting requests. To be used in the further commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/dirty-bitmap: introduce bdrv_dirty_bitmap_status()Vladimir Sementsov-Ogievskiy4-0/+53
Add a convenient function similar with bdrv_block_status() to get status of dirty bitmap. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/reqlist: reqlist_find_conflict(): use ranges_overlap()Vladimir Sementsov-Ogievskiy1-1/+2
Let's reuse convenient helper. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-8-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block: intoduce reqlistVladimir Sementsov-Ogievskiy5-80/+184
Split intersecting-requests functionality out of block-copy to be reused in copy-before-write filter. Note: while being here, fix tiny typo in MAINTAINERS. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/block-copy: add block_copy_reset()Vladimir Sementsov-Ogievskiy2-8/+14
Split block_copy_reset() out of block_copy_reset_unallocated() to be used separately later. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/copy-before-write: add bitmap open parameterVladimir Sementsov-Ogievskiy2-2/+59
This brings "incremental" mode to copy-before-write filter: user can specify bitmap so that filter will copy only "dirty" areas. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-5-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/block-copy: block_copy_state_new(): add bitmap parameterVladimir Sementsov-Ogievskiy3-2/+15
This will be used in the following commit to bring "incremental" mode to copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/dirty-bitmap: bdrv_merge_dirty_bitmap(): add return valueVladimir Sementsov-Ogievskiy3-7/+9
That simplifies handling failure in existing code and in further new usage of bdrv_merge_dirty_bitmap(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/block-copy: move copy_bitmap initialization to block_copy_state_new()Vladimir Sementsov-Ogievskiy2-4/+1
We are going to complicate bitmap initialization in the further commit. And in future, backup job will be able to work without filter (when source is immutable), so we'll need same bitmap initialization in copy-before-write filter and in backup job. So, it's reasonable to do it in block-copy. Note that for now cbw_open() is the only caller of block_copy_state_new(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303194349.2304213-2-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07iotests: Write test output to TEST_DIRHanna Reitz4-16/+14
Drop the use of OUTPUT_DIR (test/qemu-iotests under the build directory), and instead write test output files (.out.bad, .notrun, and .casenotrun) to TEST_DIR. With this, the same test can be run concurrently without the separate instances interfering, because they will need separate TEST_DIRs anyway. Running the same test separately is useful when running the iotests with various format/protocol combinations in parallel, or when you just want to aggressively exercise a single test (e.g. when it fails only sporadically). Putting this output into TEST_DIR means that it will stick around for inspection after the test run is done (though running the same test in the same TEST_DIR will overwrite it, just as it used to be); but given that TEST_DIR is a scratch directory, it should be clear that users can delete all of its content at any point. (And if TEST_DIR is on tmpfs, it will just disappear on shutdown.) Contrarily, alternative approaches that would put these output files into OUTPUT_DIR with some prefix to differentiate between separate test runs might easily lead to cluttering OUTPUT_DIR. (This change means OUTPUT_DIR is no longer written to by the iotests, so we can drop its usage altogether.) Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220221172909.762858-1-hreitz@redhat.com> [hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as suggested by Vladimir; and rebased on 9086c7639822b6 ("tests/qemu-iotests: Rework the checks and spots using GNU sed")] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2022-03-07tests/qemu-iotests/testrunner: Quote "case not run" lines in TAP modeThomas Huth1-1/+4
In TAP mode, the stdout is reserved for the TAP protocol, so we have to make sure to mark other lines with a comment '#' character at the beginning to avoid that the TAP parser at the other end gets confused. To test this condition, run "configure" for example with: --block-drv-rw-whitelist=copy-before-write,qcow2,raw,file,host_device,blkdebug,null-co,copy-on-read so that iotest 041 will report that some tests are not run due to the missing "quorum" driver. Without this change, "make check-block" fails since the meson tap parser gets confused by these messages. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220223124353.3273898-1-thuth@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07tests/qemu-iotests/040: Skip TestCommitWithFilters without 'throttle'Thomas Huth1-0/+1
iotest 040 already has some checks for the availability of the 'throttle' driver, but some new code has been added in the course of time that depends on 'throttle' but does not check for its availability. Add a check to the TestCommitWithFilters class so that this iotest now also passes again if 'throttle' has not been enabled in the QEMU binaries. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220223123127.3206042-1-thuth@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block: fix preallocate filter: don't do unaligned preallocate requestsVladimir Sementsov-Ogievskiy3-4/+18
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in wait_serialising_requests() if request is unaligned. And this is possible for the only user of this flag (preallocate filter) if underlying file is unaligned to its request_alignment on start. So, we have to fix preallocate filter to do only aligned preallocate requests. Next, we should fix generic block/io.c somehow. Keeping in mind that preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to fix its behavior now, it seems more safe to just assert that we never use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding comment. Let's do so. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com> [hreitz: Rebased on block GS/IO split] Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/curl.c: Check error return from curl_easy_setopt()Peter Maydell1-33/+57
Coverity points out that we aren't checking the return value from curl_easy_setopt() for any of the calls to it we make in block/curl.c. Some of these options are documented as always succeeding (e.g. CURLOPT_VERBOSE) but others have documented failure cases (e.g. CURLOPT_URL). For consistency we check every call, even the ones that theoretically cannot fail. Fixes: Coverity CID 1459336, 1459482, 1460331 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220222152341.850419-3-peter.maydell@linaro.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/curl.c: Set error message string if curl_init_state() failsPeter Maydell1-0/+2
In curl_open(), the 'out' label assumes that the state->errmsg string has been set (either by curl_easy_perform() or by manually copying a string into it); however if curl_init_state() fails we will jump to that label without setting the string. Add the missing error string setup. (We can't be specific about the cause of failure: the documentation of curl_easy_init() just says "If this function returns NULL, something went wrong".) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220222152341.850419-2-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07ide: Increment BB in-flight counter for TRIM BHHanna Reitz1-0/+7
When we still have an AIOCB registered for DMA operations, we try to settle the respective operation by draining the BlockBackend associated with the IDE device. However, this assumes that every DMA operation is associated with an increment of the BlockBackend’s in-flight counter (e.g. through some ongoing I/O operation), so that draining the BB until its in-flight counter reaches 0 will settle all DMA operations. That is not the case: For TRIM, the guest can issue a zero-length operation that will not result in any I/O operation forwarded to the BlockBackend, and also not increment the in-flight counter in any other way. In such a case, blk_drain() will be a no-op if no other operations are in flight. It is clear that if blk_drain() is a no-op, the value of s->bus->dma->aiocb will not change between checking it in the `if` condition and asserting that it is NULL after blk_drain(). The particular problem is that ide_issue_trim() creates a BH (ide_trim_bh_cb()) to settle the TRIM request: iocb->common.cb() is ide_dma_cb(), which will either create a new request, or find the transfer to be done and call ide_set_inactive(), which clears s->bus->dma->aiocb. Therefore, the blk_drain() must wait for ide_trim_bh_cb() to run, which currently it will not always do. To fix this issue, we increment the BlockBackend's in-flight counter when the TRIM operation begins (in ide_issue_trim(), when the ide_trim_bh_cb() BH is created) and decrement it when ide_trim_bh_cb() is done. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2029980 Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220120142259.120189-1-hreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Tested-by: John Snow <jsnow@redhat.com>
2022-03-05Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220305' into ↵Peter Maydell9-196/+190
staging ppc-7.0 queue : * Clang fixes * Vector/VSX instruction batch fixes # gpg: Signature made Sat 05 Mar 2022 08:18:06 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-ppc-20220305: target/ppc: Add missing helper_reset_fpstatus to helper_XVCVSPBF16 target/ppc: Add missing helper_reset_fpstatus to VSX_MAX_MINC target/ppc: split XXGENPCV macros for readability target/ppc: use andc in vrlqmi target/ppc: use extract/extract2 to create vrlqnm mask target/ppc: use ext32u and deposit in do_vx_vmulhw_i64 target/ppc: Fix vmul[eo]* instructions marked 2.07 tests/tcg/ppc64le: Use Altivec register names in clobber list tests/tcg/ppc64le: emit bcdsub with .long when needed tests/tcg/ppc64le: drop __int128 usage in bcdsub target/ppc: change xs[n]madd[am]sp to use float64r32_muladd tests/tcg/ppc64le: use inline asm instead of __builtin_mtfsf Use long endian options for ppc64 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-05Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220304' ↵Peter Maydell17-93/+440
into staging Reorder do_constant_folding_cond test to satisfy valgrind. Fix value of MAX_OPC_PARAM_IARGS. Add opcodes for vector nand, nor, eqv. Support vector nand, nor, eqv on PPC and S390X hosts. Support AVX512VL, AVX512BW, AVX512DQ, and AVX512VBMI2. # gpg: Signature made Fri 04 Mar 2022 18:59:08 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-tcg-20220304: (21 commits) tcg/i386: Implement bitsel for avx512 tcg/i386: Implement more logical operations for avx512 tcg/i386: Implement avx512 multiply tcg/i386: Implement avx512 min/max/abs tcg/i386: Expand scalar rotate with avx512 insns tcg/i386: Remove rotls_vec from tcg_target_op_def tcg/i386: Expand vector word rotate as avx512vbmi2 shift-double tcg/i386: Support avx512vbmi2 vector shift-double instructions tcg/i386: Implement avx512 variable rotate tcg/i386: Implement avx512 immediate rotate tcg/i386: Implement avx512 immediate sari shift tcg/i386: Implement avx512 scalar shift tcg/i386: Implement avx512 variable shifts tcg/i386: Use tcg_can_emit_vec_op in expand_vec_cmp_noinv tcg/i386: Add tcg_out_evex_opc tcg/i386: Detect AVX512 tcg/s390x: Implement vector NAND, NOR, EQV tcg/ppc: Implement vector NAND, NOR, EQV tcg: Add opcodes for vector nand, nor, eqv tcg: Set MAX_OPC_PARAM_IARGS to 7 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-05Merge remote-tracking branch 'remotes/kwolf-gitlab/tags/for-upstream' into ↵Peter Maydell75-2823/+4860
staging Block layer patches - qemu-storage-daemon: Add --daemonize - Fix x-blockdev-amend and block node activation code which incorrectly executed code in the iothread that must run in the main thread. - Add macros for coroutine-safe TLS variables (required for correctness with LTO) - Fix crashes with concurrent I/O and bdrv_refresh_limits() - Split block APIs in global state and I/O - iotests: Don't refuse to run at all without GNU sed, just skip tests that need it # gpg: Signature made Fri 04 Mar 2022 17:18:31 GMT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kwolf-gitlab/tags/for-upstream: (50 commits) block/amend: Keep strong reference to BDS block/amend: Always call .bdrv_amend_clean() tests/qemu-iotests: Rework the checks and spots using GNU sed iotests/graph-changes-while-io: New test iotests: Allow using QMP with the QSD block: Make bdrv_refresh_limits() non-recursive job.h: assertions in the callers of JobDriver function pointers job.h: split function pointers in JobDriver block-backend-common.h: split function pointers in BlockDevOps block_int-common.h: assertions in the callers of BdrvChildClass function pointers block_int-common.h: split function pointers in BdrvChildClass block_int-common.h: assertions in the callers of BlockDriver function pointers block_int-common.h: split function pointers in BlockDriver block/coroutines: I/O and "I/O or GS" API block/copy-before-write.h: global state API + assertions include/block/snapshot: global state API + assertions assertions for blockdev.h global state API include/sysemu/blockdev.h: global state API assertions for blockjob.h global state API include/block/blockjob.h: global state API ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-05target/ppc: Add missing helper_reset_fpstatus to helper_XVCVSPBF16Víctor Colombo1-0/+2
Fixes: 3909ff1fac ("target/ppc: Implement xvcvbf16spn and xvcvspbf16 instructions") Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220304175156.2012315-8-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05target/ppc: Add missing helper_reset_fpstatus to VSX_MAX_MINCVíctor Colombo1-0/+2
Fixes: da499405aa ("target/ppc: Refactor VSX_MAX_MINC helper") Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220304175156.2012315-7-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05target/ppc: split XXGENPCV macros for readabilityMatheus Ferst2-42/+57
Fixes: b090f4f1e3c9 ("target/ppc: Implement xxgenpcv[bhwd]m instruction") Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220304175156.2012315-6-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05target/ppc: use andc in vrlqmiMatheus Ferst1-4/+2
Fixes: 7e5947df6e94 ("target/ppc: implement vrlqmi") Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220304175156.2012315-5-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05target/ppc: use extract/extract2 to create vrlqnm maskMatheus Ferst1-7/+3
Fixes: 4e272668406b ("target/ppc: implement vrlqnm") Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220304175156.2012315-4-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05target/ppc: use ext32u and deposit in do_vx_vmulhw_i64Matheus Ferst1-7/+3
Fixes: 29e9dfcf755e ("target/ppc: vmulh* instructions without helpers") Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220304175156.2012315-3-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05target/ppc: Fix vmul[eo]* instructions marked 2.07Lucas Mateus Castro (alqotel)1-8/+8
Some ISA v2.03 Vector Multiply instructions marked to be ISA v2.07 only. This patch fixes it. Fixes: 80eca687c851 ("target/ppc: moved vector even and odd multiplication to decodetree") Reported-by: Howard Spoelstra <hsp.cat7@gmail.com> Suggested-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220304175156.2012315-2-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05tests/tcg/ppc64le: Use Altivec register names in clobber listMatheus Ferst1-8/+8
LLVM/Clang doesn't know the VSX registers when compiling with -mabi=elfv1. Use only registers >= 32 and list them with their Altivec name. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Message-Id: <20220304165417.1981159-6-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05tests/tcg/ppc64le: emit bcdsub with .long when neededMatheus Ferst1-31/+42
Based on GCC docs[1], we use the '-mpower8-vector' flag at config-time to detect the toolchain support to the bcdsub instruction. LLVM/Clang supports this flag since version 3.6[2], but the instruction and related builtins were only added in LLVM 14[3]. In the absence of other means to detect this support at config-time, we resort to __has_builtin to identify the presence of __builtin_bcdsub at compile-time. If the builtin is not available, the instruction is emitted with a ".long". [1] https://gcc.gnu.org/onlinedocs/gcc-8.3.0/gcc/PowerPC-AltiVec_002fVSX-Built-in-Functions.html [2] https://github.com/llvm/llvm-project/commit/59eb767e11d4ffefb5f55409524e5c8416b2b0db [3] https://github.com/llvm/llvm-project/commit/c933c2eb334660c131f4afc9d194fafb0cec0423 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Message-Id: <20220304165417.1981159-5-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05tests/tcg/ppc64le: drop __int128 usage in bcdsubMatheus Ferst1-68/+61
Using __int128 with inline asm constraints like "v" generates incorrect code when compiling with LLVM/Clang (e.g., only one doubleword of the VSR is loaded). Instead, use a GPR pair to pass the 128-bits value and load the VSR with mtvsrd/xxmrghd. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Message-Id: <20220304165417.1981159-4-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05target/ppc: change xs[n]madd[am]sp to use float64r32_muladdMatheus Ferst1-38/+20
Change VSX Scalar Multiply-Add/Subtract Type-A/M Single Precision helpers to use float64r32_muladd. This method should correctly handle all rounding modes, so the workaround for float_round_nearest_even can be dropped. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Message-Id: <20220304165417.1981159-3-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05tests/tcg/ppc64le: use inline asm instead of __builtin_mtfsfMatheus Ferst1-10/+9
LLVM/Clang does not support __builtin_mtfsf. Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Message-Id: <20220304165417.1981159-2-matheus.ferst@eldorado.org.br> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05Use long endian options for ppc64Miroslav Rezanina2-4/+4
GCC options pairs -mlittle/-mlittle-endian and -mbig/-mbig-endian are equivalent on ppc64 architecture. However, Clang supports only long version of the options. Use longer form in configure to properly support both GCC and Clang compiler. In addition, fix this issue in tcg test configure. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20220131091714.4825-1-mrezanin@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-04Merge remote-tracking branch ↵Peter Maydell27-364/+600
'remotes/kraxel/tags/kraxel-20220304-pull-request' into staging usb: fixes for ohci, xhci, mtp and redirect audio: latency fixes ui: opengl and cocoa fixes firmware: ovmf tabel aprser fixes # gpg: Signature made Fri 04 Mar 2022 14:18:47 GMT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/kraxel-20220304-pull-request: (35 commits) hw/display/vmware_vga: replace fprintf calls with trace events edid: Fix clock of Detailed Timing Descriptor softmmu/qdev-monitor: Add virtio-gpu-gl aliases ui/cocoa: Add Services menu ui/clipboard: fix use-after-free regression ui: do not create a surface when resizing a GL scanout ui/console: fix texture leak when calling surface_gl_create_texture() ui/console: fix crash when using gl context with non-gl listeners docs: Add spec of OVMF GUIDed table for SEV guests hw/i386: Replace magic number with field length calculation hw/i386: Improve bounds checking in OVMF table parsing coreaudio: Notify error in coreaudio_init_out hw/usb/redirect.c: Stop using qemu_oom_check() sdlaudio: fix samples vs. frames mix-up paaudio: fix samples vs. frames mix-up ossaudio: reduce effective playback buffer size dsoundaudio: reduce effective playback buffer size paaudio: reduce effective playback buffer size audio: restore mixing-engine playback buffer size Revert "audio: fix wavcapture segfault" ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-04tcg/i386: Implement bitsel for avx512Richard Henderson2-2/+20
The general ternary logic operation can implement BITSEL. Funnel the 4-operand operation into three variants of the 3-operand instruction, depending on input operand overlap. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg/i386: Implement more logical operations for avx512Richard Henderson2-5/+39
AVX512VL has a general ternary logic operation, VPTERNLOGQ, which can implement NOT, ORC, NAND, NOR, EQV. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg/i386: Implement avx512 multiplyRichard Henderson1-6/+6
AVX512DQ has VPMULLQ. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg/i386: Implement avx512 min/max/absRichard Henderson1-7/+11
AVX512VL has VPABSQ, VPMAXSQ, VPMAXUQ, VPMINSQ, VPMINUQ. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg/i386: Expand scalar rotate with avx512 insnsRichard Henderson1-20/+29
Expand 32-bit and 64-bit scalar rotate with VPRO[LR]V; expand 16-bit scalar rotate with VPSHLDV. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg/i386: Remove rotls_vec from tcg_target_op_defRichard Henderson1-1/+0
There is no such instruction on x86, so we should not be pretending it has arguments. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg/i386: Expand vector word rotate as avx512vbmi2 shift-doubleRichard Henderson1-1/+17
While there are no specific 16-bit rotate instructions, there are double-word shifts, which can perform the same operation. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg/i386: Support avx512vbmi2 vector shift-double instructionsRichard Henderson3-0/+42
We will use VPSHLD, VPSHLDV and VPSHRDV for 16-bit rotates. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2025-01-16 03:08:07 +0000