aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-07-03qmp qemu-ga: Fix qemu-ga not to accept "control"Markus Armbruster6-24/+24
Commit cf869d53172 "qmp: support out-of-band (oob) execution" accidentally made qemu-ga accept and ignore "control". Fix that. Out-of-band execution in a monitor that doesn't support it now fails with {"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}} instead of {"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}} The old description is suboptimal when out-of-band cannot not be enabled, or the command doesn't support out-of-band execution. The new description is a bit unspecific, but it'll do. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-12-armbru@redhat.com>
2018-07-03tests/test-qga: Demonstrate the guest-agent ignores "control"Markus Armbruster1-0/+17
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-11-armbru@redhat.com>
2018-07-03qmp qemu-ga: Revert change that accidentally made qemu-ga accept "id"Markus Armbruster3-16/+13
Commit cf869d53172 "qmp: support out-of-band (oob) execution" changed how we check "id": Note that in the patch I exported qmp_dispatch_check_obj() to be used to check the request earlier, and at the same time allowed "id" field to be there since actually we always allow that. The part after "and" is ill-advised: it makes qemu-ga accept and ignore "id". Revert. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-10-armbru@redhat.com>
2018-07-03tests/test-qga: Demonstrate the guest-agent ignores "id"Markus Armbruster1-0/+20
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-9-armbru@redhat.com>
2018-07-03qmp: Make "id" optional again even in "oob" monitorsMarkus Armbruster2-13/+7
Commit cf869d53172 "qmp: support out-of-band (oob) execution" made "id" mandatory for all commands when the client accepted capability "oob". This is rather onerous when you play with QMP by hand, and unnecessarily so: only out-of-band commands need an ID for reliable matching of response to command. Revert that part of commit cf869d53172 for now, but have documentation advise on the need to use "id" with out-of-band commands. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703085358.13941-8-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-07-03tests/qmp-test: Test in-band command doesn't overtakeMarkus Armbruster1-0/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-7-armbru@redhat.com>
2018-07-03qmp: Get rid of x-oob-test commandMarkus Armbruster3-64/+65
tests/qmp-test tests an out-of-band command overtaking a slow in-band command. To do that, it needs: 1. An in-band command that *reliably* takes long enough to be overtaken. 2. An out-of-band command to do the overtaking. 3. To avoid delays, a way to make the in-band command complete quickly after it was overtaken. To satisfy these needs, commit 469638f9cb3 provides the rather peculiar oob-capable QMP command x-oob-test: * With "lock": true, it waits for a global semaphore. * With "lock": false, it signals the global semaphore. To satisfy 1., the test runs x-oob-test in-band with "lock": true. To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false. Note that waiting for a semaphore violates the rules for oob-capable commands. Running x-oob-test with "lock": true hangs the monitor until you run x-oob-test with "lock": false on another monitor (which you might not have set up). Having an externally visible QMP command that may hang the monitor is not nice. Let's apply a little more ingenuity to the problem. Idea: have an existing command block on reading a FIFO special file, unblock it by opening the FIFO for writing. For 1., use {"execute": "blockdev-add", "id": ID1, "arguments": { "driver": "blkdebug", "node-name": ID1, "config": FIFO, "image": { "driver": "null-co"}}} where ID1 is an arbitrary string, and FIFO is the name of the FIFO. For 2., use {"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}} where ID2 is a different arbitrary string. Since there's no migration to pause, the command will fail, but that's fine; instant failure is still a test of out-of-band responses overtaking in-band commands. For 3., open FIFO for writing. Drop QMP command x-oob-test. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-6-armbru@redhat.com> [Error checking tweaked]
2018-07-03qmp: Document COMMAND_DROPPED design flawMarkus Armbruster2-0/+9
Events are broadcast to all monitors. If another monitor's client has a command with the same ID in flight, the event will incorrectly claim that command was dropped. This must be fixed before out-of-band execution can graduate from "experimental". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-5-armbru@redhat.com>
2018-07-03docs/interop/qmp: Improve OOB documentationMarkus Armbruster2-31/+56
OOB documentation is spread over qmp-spec.txt sections 2.2.1 Capabilities and 2.3 Issuing Commands. The amount of detail is a bit distracting there. Move the meat of the matter to new section 2.3.1 Out of band execution. Throw in a few other improvements while there: * 2.2 Server Greeting: Drop advice to search entire capabilities array; should be obvious. * 3. QMP Examples - 3.1 Server Greeting: Update greeting to the one we expect for the release. Now shows capability "oob". Update qmp-intro.txt likewise. - 3.2 Capabilities negotiation: Show client accepting capability "oob". - 3.7 Out-of-band execution: New. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-4-armbru@redhat.com> [Whitespace tidied up]
2018-07-03monitor: Spell "I/O thread" consistently in commentsMarkus Armbruster1-17/+17
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-3-armbru@redhat.com>
2018-07-03qmp: Say "out-of-band" instead of "Out-Of-Band"Markus Armbruster6-12/+12
Affects documentation and a few error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-2-armbru@redhat.com>
2018-07-02Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell129-440/+840
* IEC units series (Philippe) * Hyper-V PV TLB flush (Vitaly) * git archive detection (Daniel) * host serial passthrough fix (David) * NPT support for SVM emulation (Jan) * x86 "info mem" and "info tlb" fix (Doug) # gpg: Signature made Mon 02 Jul 2018 16:18:21 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (50 commits) tcg: simplify !CONFIG_TCG handling of tb_invalidate_* i386/monitor.c: make addresses canonical for "info mem" and "info tlb" target-i386: Add NPT support serial: Open non-block bsd-user: Use the IEC binary prefix definitions linux-user: Use the IEC binary prefix definitions tests/crypto: Use the IEC binary prefix definitions vl: Use the IEC binary prefix definitions monitor: Use the IEC binary prefix definitions cutils: Do not include "qemu/units.h" directly hw/rdma: Use the IEC binary prefix definitions hw/virtio: Use the IEC binary prefix definitions hw/vfio: Use the IEC binary prefix definitions hw/sd: Use the IEC binary prefix definitions hw/usb: Use the IEC binary prefix definitions hw/net: Use the IEC binary prefix definitions hw/i386: Use the IEC binary prefix definitions hw/ppc: Use the IEC binary prefix definitions hw/mips: Use the IEC binary prefix definitions hw/mips/r4k: Constify params_size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20180702' into stagingPeter Maydell6-57/+99
Assorted tlb and tb caching fixes # gpg: Signature made Mon 02 Jul 2018 17:03:07 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20180702: cpu: Assert asidx_from_attrs return value in range accel/tcg: Avoid caching overwritten tlb entries accel/tcg: Don't treat invalid TLB entries as needing recheck accel/tcg: Correct "is this a TLB miss" check in get_page_addr_code() tcg: Define and use new tlb_hit() and tlb_hit_page() functions translate-all: fix locking of TBs whose two pages share the same physical page Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02Merge remote-tracking branch ↵Peter Maydell20-20/+13
'remotes/kraxel/tags/seabios-1.11.2-20180702-pull-request' into staging seabios: update to release 1.11.2, add/update configuration. vgabios: remove (old unused lgpl'ed vgabios). ramfb,bochs-display: use new vgabios roms. # gpg: Signature made Mon 02 Jul 2018 16:42:06 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/seabios-1.11.2-20180702-pull-request: ramfb: enable vgabios bochs-display: enable vgabios seabios: update bios and vgabios binaries vgabios: remove submodule and build rules. seabios: enable ide dma seabios: add vga configs for bochs-display and ramfb seabios: update submodule to release 1.11.2 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02ramfb: enable vgabiosGerd Hoffmann1-0/+1
Add vgabios binary to fw_cfg vgaroms. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02bochs-display: enable vgabiosGerd Hoffmann1-0/+1
Add vgabios binary to pci rom bar. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02seabios: update bios and vgabios binariesGerd Hoffmann10-0/+0
Adds two new vgabios binaries, for ramfb and bochs-display. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02vgabios: remove submodule and build rules.Gerd Hoffmann3-19/+2
It's the old, lgpl vgabios implementation. Was left in as fallback when we switched to seavgabios, so we could easily switch back in case we see regressions. It's unused since years now, reportedly doesn't even build, and lacks support for recently (and not so recently) added display devices. Zap it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02seabios: enable ide dmaGerd Hoffmann2-0/+2
QNX reportedly requires this to boot. Should also speed up booting other guests. Note: Upstream seabios defaults this to 'n' to due to known problems on physical hardware (qemu not affected), and wouldn't flip the default to 'y'. So we adjust our local build config accordingly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02seabios: add vga configs for bochs-display and ramfbGerd Hoffmann3-1/+7
Both bochs-display and ramfb are devices with a simple framebuffer and no vga emulation or text mode. seavgabios has support for text mode emulation (at vgabios call level), we are using that to provide some vga compatibility support for these devices. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02seabios: update submodule to release 1.11.2Gerd Hoffmann1-0/+0
git shortlog rel-1.11.1..rel-1.11.2 ----------------------------------- Gerd Hoffmann (11): optionrom: enable non-vga display devices cbvga: factor out cbvga_setup_modes() qemu: add bochs-display support cbvga_setup_modes: use real mode number instead of 0x140 cbvga_list_modes: don't list current mode twice cbvga_set_mode: disable clearmem in windows x86 emulator. bochs_display_setup: return error on failure pmm: use tmp zone on oom vgasrc: add allocate_pmm() qemu: add qemu ramfb support cbvga_set_mode: refine clear display logic Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02cpu: Assert asidx_from_attrs return value in rangeRichard Henderson1-2/+4
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02accel/tcg: Avoid caching overwritten tlb entriesRichard Henderson1-26/+35
When installing a TLB entry, remove any cached version of the same page in the VTLB. If the existing TLB entry matches, do not copy into the VTLB, but overwrite it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02accel/tcg: Don't treat invalid TLB entries as needing recheckPeter Maydell1-1/+2
In get_page_addr_code() when we check whether the TLB entry is marked as TLB_RECHECK, we should not go down that code path if the TLB entry is not valid at all (ie the TLB_INVALID bit is set). Tested-by: Laurent Vivier <laurent@vivier.eu> Reported-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180629161731.16239-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02accel/tcg: Correct "is this a TLB miss" check in get_page_addr_code()Peter Maydell1-2/+1
In commit 71b9a45330fe220d1 we changed the condition we use to determine whether we need to refill the TLB in get_page_addr_code() to if (unlikely(env->tlb_table[mmu_idx][index].addr_code != (addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK)))) { This isn't the right check (it will falsely fail if the input addr happens to have the low bit corresponding to TLB_INVALID_MASK set, for instance). Replace it with a use of the new tlb_hit() function, which is the correct test. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180629162122.19376-3-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02tcg: Define and use new tlb_hit() and tlb_hit_page() functionsPeter Maydell4-22/+35
The condition to check whether an address has hit against a particular TLB entry is not completely trivial. We do this in various places, and in fact in one place (get_page_addr_code()) we have got the condition wrong. Abstract it out into new tlb_hit() and tlb_hit_page() inline functions (one for a known-page-aligned address and one for an arbitrary address), and use them in all the places where we had the condition correct. This is a no-behaviour-change patch; we leave fixing the buggy code in get_page_addr_code() to a subsequent patch. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180629162122.19376-2-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02translate-all: fix locking of TBs whose two pages share the same physical pageEmilio G. Cota1-7/+25
Commit 0b5c91f ("translate-all: use per-page locking in !user-mode", 2018-06-15) introduced per-page locking. It assumed that the physical pages corresponding to a TB (at most two pages) are always distinct, which is wrong. For instance, an xtensa test provided by Max Filippov is broken by the commit, since the test maps two virtual pages to the same physical page: virt1: 7fff, virt2: 8000 phys1 6000fff, phys2 6000000 Fix it by removing the assumption from page_lock_pair. If the two physical page addresses are equal, we only lock the PageDesc once. Note that the two callers of page_lock_pair, namely page_unlock_tb and tb_link_page, are also updated so that we do not try to unlock the same PageDesc twice. Fixes: 0b5c91f74f3c83a36f37740969df8c775c997e69 Reported-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1529944302-14186-1-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180702' into stagingPeter Maydell30-166/+543
s390x updates: - add bpb/ppa15 features to default cpu model for z196 and later - rework TOD handling and fix cpu hotplug under tcg - various fixes # gpg: Signature made Mon 02 Jul 2018 12:09:40 BST # gpg: using RSA key DECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cohuck@redhat.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20180702: s390x/tcg: fix locking problem with tcg_s390_tod_updated s390x/kvm: indicate alignment in legacy_s390_alloc() s390x/kvm: legacy_s390_alloc() only supports one allocation s390x/tcg: fix CPU hotplug with single-threaded TCG s390x/tcg: rearm the CKC timer during migration s390x/tcg: implement SET CLOCK s390x/tcg: SET CLOCK COMPARATOR can clear CKC interrupts s390x/tcg: properly implement the TOD s390x/tcg: drop tod_basetime s390x/tod: factor out TOD into separate device s390x/kvm: pass values instead of pointers to kvm_s390_set_clock_*() s390x/tcg: avoid overflows in time2tod/tod2time s390x/cpumodel: default enable bpb and ppa15 for z196 and later loader: Check access size when calling rom_ptr() to avoid crashes s390/ipl: fix ipl with -no-reboot Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02tcg: simplify !CONFIG_TCG handling of tb_invalidate_*Paolo Bonzini3-12/+8
There is no need for a stub, since tb_invalidate_phys_addr can be excised altogether when TCG is disabled. This is a bit cleaner since it avoids using code that is clearly specific to user-mode emulation (it calls mmap_lock/unlock) for the !CONFIG_TCG case. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02i386/monitor.c: make addresses canonical for "info mem" and "info tlb"Doug Gale1-32/+44
Correct the output of the "info mem" and "info tlb" monitor commands to correctly show canonical addresses. In 48-bit addressing mode, the upper 16 bits of linear addresses are equal to bit 47. In 57-bit addressing mode (LA57), the upper 7 bits of linear addresses are equal to bit 56. Signed-off-by: Doug Gale <doug16k@gmail.com> Message-Id: <20180617084025.29198-1-doug16k@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02target-i386: Add NPT supportJan Kiszka7-6/+281
This implements NPT suport for SVM by hooking into x86_cpu_handle_mmu_fault where it reads the stage-1 page table. Whether we need to perform this 2nd stage translation, and how, is decided during vmrun and stored in hflags2, along with nested_cr3 and nested_pg_mode. As get_hphys performs a direct cpu_vmexit in case of NPT faults, we need retaddr in that function. To avoid changing the signature of cpu_handle_mmu_fault, this passes the value from tlb_fill to get_hphys via the CPU state. This was tested successfully via the Jailhouse hypervisor. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-Id: <567473a0-6005-5843-4c73-951f476085ca@web.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02serial: Open non-blockDr. David Alan Gilbert1-1/+2
On a real serial device, the open can block if the handshake lines are in a particular state. If a QEMU is passing the serial device to the guest, the QEMU startup is blocked opening the device (with a symptom seen as a timeout from libvirt). Open the serial port with O_NONBLOCK. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02bsd-user: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-2/+3
It eases code review, unit is explicit. Patch generated using: $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-47-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02linux-user: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-2/+3
It eases code review, unit is explicit. Patch generated using: $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-46-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02tests/crypto: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé3-8/+9
It eases code review, unit is explicit. Patch generated using: $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-45-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02vl: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-2/+3
It eases code review, unit is explicit. Patch generated using: $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-44-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02monitor: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-1/+2
It eases code review, unit is explicit. Patch generated using: $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-43-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02cutils: Do not include "qemu/units.h" directlyPhilippe Mathieu-Daudé1-1/+0
All files using "qemu/units.h" definitions already include it directly, we can now remove it from "qemu/cutils.h". Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20180625124238.25339-41-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/rdma: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-1/+2
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20180625124238.25339-40-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/virtio: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-1/+2
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-39-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/vfio: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé2-5/+7
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-38-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/sd: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé2-5/+5
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-37-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/usb: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé4-7/+11
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-36-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/net: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé5-10/+13
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20180625124238.25339-35-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/i386: Use the IEC binary prefix definitionsPaolo Bonzini5-21/+22
It eases code review, unit is explicit. Patch generated using: $ git grep -E '[<>][<>]=? ?[1-5]0' hw/ include/hw/ and modified manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/ppc: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé20-70/+84
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20180625124238.25339-33-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/mips: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé7-24/+33
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20180625124238.25339-31-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/mips/r4k: Constify params_sizePhilippe Mathieu-Daudé1-3/+3
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-30-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/sh4: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-1/+2
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-29-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/lm32: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé2-11/+12
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Michael Walle <michael@walle.cc> Message-Id: <20180625124238.25339-28-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-29 01:13:33 +0000