aboutsummaryrefslogtreecommitdiff
path: root/.travis.yml
AgeCommit message (Collapse)AuthorFilesLines
2019-02-22.travis.yml: Remove disable-uuidDr. David Alan Gilbert1-1/+1
Commit 315d3184525 turned --disable-uuid into a warning only; remove the check from Travis. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190215094502.32149-2-dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-22.travis.yml: Test with disable-replicationDr. David Alan Gilbert1-1/+1
We've had the build break with replication disabled, so lets test that case in travis. Suggsted-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190215094502.32149-1-dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-22.travis.yml: split debug buildsAlex Bennée1-1/+6
The builds are reaching the magic 50 minute limit with regularity so lets split them up. Rather than doing a full debug build on both just enable debug tcg for linux-user. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-22.travis.yml: the xcode10 image seems to be hosedPaolo Bonzini1-7/+0
It fails to install homebrew. Unfortunately we cannot mark it as an expected failure because Travis does not match allow_failures rows against include rows (only against the main test matrix, which we do not use at all), so just disable it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190220105131.23479-1-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08.travis.yml: fold --disable-tcg into alternate coroutine buildsAlex Bennée1-7/+6
The alternate coroutine builds are really only of interest to people running KVM (although I think you could use them for TCG if you really tried). As they tend to run long lets kill two birds with one stone and fold the --disable-tcg build into them. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08.travis.yml: separate tools and docs into another entryAlex Bennée1-2/+14
Re-building the tools and documents by default is a little wasteful as they are not really affected by the main build options. Split tools and documents into their own task with a minimal softmmu and linux-user target list just to check they don't interact badly. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-08.travis.yml: stop requesting libffi & gettext from homebrewDaniel P. Berrangé1-2/+0
The default package set installed on macOS builders from Travis already includes libffi and gettext as shown by log messages: Skipping install of libffi formula. It is already up-to-date. Using libffi Skipping install of gettext formula. It is already up-to-date. Using gettext Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-17Travis CI: make specified Python versions usable on jobsCleber Rosa1-1/+3
For the two Python jobs, which seem to have the goal of making sure QEMU builds successfully on the 3.0-3.6 spectrum of Python 3 versions, the specified version is only applicable if a Python virtual environment is used. To do that, it's necessary to define the (primary?) language of the job to be Python. Also, Travis doesn't have a 3.0 Python installation available for the chosen distro, 3.4 being the lower version available. Reference: https://docs.travis-ci.com/user/languages/python/#specifying-python-versions Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181109150710.31085-4-crosa@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [ehabkost: Now 3.4 is the lowest Python version available] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> fixup! Travis CI: make specified Python versions usable on jobs Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-14travis: bump to Xenial baselineAlex Bennée1-9/+7
Travis is slowly catching up. Move to Xenial based images for our current builds. These are now all proper VMs. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-14travis: remove matrix settings that duplicate global settingsDaniel P. Berrangé1-8/+0
The global defaults request "trusty" and "gcc", so matrix entries do not need to repeat this. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-14travis: run tests in verbose modeDaniel P. Berrangé1-2/+2
Travis sometimes fails a build because it produces no console output for over 10 minutes. If this is due to a genuine hang, it would be useful to have used verbose test output to see where it failed. If this is just due to tests being very slow, having verbose output might allow the build to succeed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-14travis: stop using container based envsDaniel P. Berrangé1-5/+0
The Travis container based envs are deprecated: https://docs.travis-ci.com/user/reference/trusty/ "Container-based infrastructure is currently being deprecated. Please remove any sudo: false keys in your .travis.yml file to use the default fully-virtualized Linux infrastructure instead." Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-14travis: stop redefining the script commandsDaniel P. Berrangé1-6/+3
One of the matrix entries redefines the script command in order to add the ${MAKEFLAGS} variable. Ideally ${MAKEFLAGS} would be referenced by the definition of the ${TEST_CMD} env variable, but this isn't possible in travis. ${MAKEFLAGS} exists to eliminate duplication of flags in every "make" command, but this cure causes a worse problem, namely the reduplication of the "script" command. It is simpler to just insert "-j3" directly into any "make" command. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-14travis: use homebrew addon for MacOSXAlex Bennée1-3/+6
Rather than poking homebrew manually we can specify the packages needed via the homebrew addon. These are only installed on MacOS based builds. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-14travis: don't clone git submodules upfrontDaniel P. Berrangé1-1/+0
The configure script & Makefile are already capable of figuring out which git submodules are required for a given build platform, and cloning them at the right time. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-14travis: standardize the syntax used for env variablesDaniel P. Berrangé1-28/+49
Matrix entries are defining env variables using two different syntax styles: - env: FOO=bar WIZZ=bang and - env: - FOO=bar - WIZZ=bang Switch everything to use the latter style as the more normal indentation approach. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-14travis: define all the build matrix entries in one placeDaniel P. Berrangé1-8/+21
The current build matrix is constructed from entries listed under the environment variable config section, as well as the general purpose build matrix section. Move everything under the general purpose section so it is clear at a glance what is in the matrix. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-01-14travis: add whitespace between each major section & matrix entryDaniel P. Berrangé1-0/+42
Improve the readability of the travis config by adding two blank lines between each major section and matrix entry. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-11-14.travis.yml: split MacOSX builds and reduce target listAlex Bennée1-1/+7
We have reached the point where the MacOSX build was regularly timing out. So as before I've reduced the target list to "major" architectures to try and bring the build time down. I've added an additional MacOSX build with the latest XCode with a minimal list of "most likely" targets on MacOS. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-10-30Travis support for the acceptance testsCleber Rosa1-0/+8
This enables the execution of the acceptance tests on Travis. Because the Travis environment is based on Ubuntu Trusty, it requires the python3-pip and python3.4-venv packages. Signed-off-by: Cleber Rosa <crosa@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Message-Id: <20181018153134.8493-4-crosa@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-07-05travis: add gcovr summary for GCOV buildAlex Bennée1-0/+3
This gives a more useful summary, sorted by descending % coverage, after the tests have run. The final numbers will give an idea if our coverage is getting better or worse. To keep the width sane we need to post process the file that the old gcovr tool generates. This is done with a mix of sed, awk and column in the scripts/coverage-summary.sh script. As quite a lot of lines don't get covered at all we filter out all the 0% lines. If the file doesn't appear it is not being exercised. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-05travis: test out-of-tree buildsPhilippe Mathieu-Daudé1-1/+7
Force one config to build 'out-of-tree' (object files and executables are created in a tree outside the project source code). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-05travis: do not waste time cloning unused submodulesPhilippe Mathieu-Daudé1-2/+1
Builds only require: - dtc - keycodemapdb - capstone Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [AJB: drop wget cache] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-20.travis.yml: add check-tcg testAlex Bennée1-0/+8
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-14travis: reduce time taken for trace-backend testingAlex Bennée1-3/+4
These builds are reaching regular timeouts and probably don't need to be so widely exercised. ftrace and ust in particular are used in conjunction with whole system profiling which makes most sense with KVM setups, hence the native softmmu target. We also expand simple to cover the multiple log backends while restricting its scope to user-mode testing only. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-14travis: reduce coverage of gprof buildAlex Bennée1-1/+1
This build is regularly timing out and even switching off linux-user wasn't enough. Instead explicitly choose a target list of broadly the "major" architectures. This is enough to check the gprof build machinery works without worrying about the actual coverage results. I did try various YAML constructs for specifying CONFIG with continuation but couldn't get any of them to work hence the very long line. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-14travis: display config.log when configure failsDaniel P. Berrangé1-2/+2
When configure fails in CI systems we must be able to see the contents of the config.log file to diagnose the root cause. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Fam Zheng <famz@redhat.com> [AJB: used Eric's suggested {} form] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-01.travis.yml: update GCC sanitizer build to GCC 7Alex Bennée1-4/+5
GCC has moved on and so should we. We also enable apt update to ensure we get the latest build from the toolchain PPA. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01.travis.yml: make current setup explicitAlex Bennée1-0/+4
Add some commentary and make the selection of Container based Trusty build explicit. We will need to add VM builds later when using docker. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01.travis.yml: rationalise clang testingAlex Bennée1-62/+7
As Travis includes Clang 5.0 in its own build environment there is no point manually building with older Clangs. We still need to test with the two pythons though so we leave them as minimal system only builds. We also split the clang build into two as it often exceeds the 40 minute build time limit. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01.travis.yml: disable linux-user build for gcovAlex Bennée1-1/+1
Currently the default testing doesn't exercise the linux-user builds so there is no point spending time building them. We may want to enable a separate gcov build once linux-user testing is re-enabled although it's likely to report very low coverage. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-03-13.travis.yml: add --disable-user with the rest of the disablesAlex Bennée1-1/+1
As all the disabled features only affect system emulation we might as well disable user mode to save compile time. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-13.travis.yml: split default config into system and userAlex Bennée1-1/+2
As the build times have risen we keep timing out. Split the default config into system and user builds. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-13.travis.yml: drop setting default log outputAlex Bennée1-1/+1
The log backend is the default one, we don't need to explicitly set it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-02-13travis: use libgcc-4.8-dev (libgcc-6-dev is not available on Ubuntu 14.04)Philippe Mathieu-Daudé1-1/+1
Travis image is based on Ubuntu Trusty (14.04), since d83414e1fd1 we get: $ sudo -E \ apt-get -yq --no-install-suggests --no-install-recommends --force-yes \ install \ libaio-dev libattr1-dev libbrlapi-dev libcap-ng-dev libgcc-6-dev \ libgnutls-dev libgtk-3-dev libiscsi-dev liblttng-ust-dev \ libncurses5-dev libnfs-dev libnss3-dev libpixman-1-dev libpng12-dev \ librados-dev libsdl1.2-dev libseccomp-dev libspice-protocol-dev \ libspice-server-dev libssh2-1-dev liburcu-dev libusb-1.0-0-dev \ libvte-2.90-dev sparse uuid-dev Reading package lists... Building dependency tree... Reading state information... E: Unable to locate package libgcc-6-dev Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-02-09.travis.yml: add --disable-linux-user for some jobsAlex Bennée1-3/+3
The modules and co-routine builds are only really relevant to softmmu builds and regularly timeout on Travis. Let's disable linux-user builds here for more headroom. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2018-02-07Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+2
* socket option parsing fix (Daniel) * SCSI fixes (Fam) * Readline double-free fix (Greg) * More HVF attribution fixes (Izik) * WHPX (Windows Hypervisor Platform Extensions) support (Justin) * POLLHUP handler (Klim) * ivshmem fixes (Ladi) * memfd memory backend (Marc-André) * improved error message (Marcelo) * Memory fixes (Peter Xu, Zhecheng) * Remove obsolete code and comments (Peter M.) * qdev API improvements (Philippe) * Add CONFIG_I2C switch (Thomas) # gpg: Signature made Wed 07 Feb 2018 15:24:08 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) Add the WHPX acceleration enlightenments Introduce the WHPX impl Add the WHPX vcpu API Add the Windows Hypervisor Platform accelerator. tests/test-filter-redirector: move close() tests: use memfd in vhost-user-test vhost-user-test: make read-guest-mem setup its own qemu tests: keep compiling failing vhost-user tests Add memfd based hostmem memfd: add hugetlbsize argument memfd: add hugetlb support memfd: add error argument, instead of perror() cpus: join thread when removing a vCPU cpus: hvf: unregister thread with RCU cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug cpus: dummy: unregister thread with RCU, exit loop on unplug cpus: kvm: unregister thread with RCU cpus: hax: register/unregister thread with RCU, exit loop on unplug ivshmem: Disable irqfd on device reset ivshmem: Improve MSI irqfd error handling ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # cpus.c
2018-02-07ucontext: annotate coroutine stack for ASANMarc-André Lureau1-1/+2
It helps ASAN to detect more leaks on coroutine stacks, and to get rid of some extra warnings. Before: tests/test-coroutine -p /basic/lifecycle /basic/lifecycle: ==20781==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases! ==20781==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffcb184d000; bottom 0x7ff6c4cfd000; size: 0x0005ecb50000 (25446121472) False positive error reports may follow For details see https://github.com/google/sanitizers/issues/189 OK After: tests/test-coroutine -p /basic/lifecycle /basic/lifecycle: ==21110==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases! OK A similar work would need to be done for sigaltstack & windows fibers to have similar coverage. Since ucontext is preferred, I didn't bother checking the other coroutine implementations for now. Update travis to fix the build with ASAN annotations. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180116151152.4040-4-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05travis: improve python version test coverageDaniel P. Berrange1-5/+9
Currently travis declares ancient python 2.4 is desired. Update that to 2.6 which is the oldest version any targetted distros still needs. If we just list a python 3 version at the top level this will double the number of travis jobs we run which is unreasonable. So arbitrarily pick the clang test matrix entries to build with python 3.0 and 3.6, to extend coverage of python versions, without increasing job count or build time. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20180116134217.8725-14-berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-18travis: move make -j flag out of scriptPaolo Bonzini1-1/+2
Because global environment variables can be overridden when .travis.yml is processed by the docker-travis target, the effect of this patch is that docker-travis now obeys the "J=n" option. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-07-17travis: add no-TCG buildPaolo Bonzini1-0/+3
It's fairly easy for --disable-tcg to bitrot. Test it in our CI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170714093016.10897-1-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-05-12coroutine: remove GThread implementationDaniel P. Berrange1-4/+1
The GThread implementation is not functional enough to actually run QEMU reliably. While it was potentially useful for debugging, we have a scripts/qemugdb/coroutine.py to enable tracing of ucontext coroutines in GDB, so that removes the only reason for GThread to exist. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-10.travis.yml: split VM based buildsAlex Bennée1-4/+34
The Trusty based builds run a little slower than the main container based ones. This is also true for the latest version of Clang. The builds are getting very close (and occasionally run over) the 50 minute timeout. Rather than partitioning by target I just split them into linux-user and system builds. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-10.travis.yml: don't specify CONFIG twiceAlex Bennée1-2/+1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-01-12travis: add Trusty with clang stable buildAlex Bennée1-0/+20
Although we've reduced the matrix to avoid repeating clang builds we can still add an additional clang build to use the latest stable version of clang which will typically be available on current distros. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-01-12travis: trim out most clang buildsDaniel P. Berrange1-1/+3
We test with both gcc and clang in order to detect cases where clang issues warnings that gcc misses. To achieve this though we don't need to build QEMU in multiple different configurations. Just a single clang-on-linux build will be sufficient, if we have an "all enabled" config. This cuts the number of build jobs from 21 to 16, reducing the load imposed on shared Travis CI infra. This will make it practical to enable jobs for other interesting & useful configurations without DOS'ing Travis to much. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2016-10-04.travis.yml: add gcc sanitizer buildAlex Bennée1-0/+45
As it seems easy to break the ThreadSanitizer build we should defend it to ensure that fixes get applied when it breaks. We use the Ubuntu GCC PPA to get the latest GCC goodness. As we need to use the -fuse-ld=gold work around we have to disable the linux-user targets as these trip up the linker. The make check run is also disabled for Travis but this can be re-enabled once the check targets have been fixed. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20160930213106.20186-13-alex.bennee@linaro.org>
2016-07-18.travis.yml: Disable IRC build status updates from forksPranith Kumar1-1/+4
We want the travis build bot to post notifications on IRC only for the master qemu repository and not the various forks/branches of others. Currently there is no direct option to restrict the updates to one repository. This is being worked upon by the developers and tracked in https://github.com/travis-ci/travis-ci/issues/1094. Until such time, we can use the workaround as posted in ref. https://github.com/facebook/flow/pull/1822. This basically creates an ecrypted string which decrypts to qemu IRC channel only on "qemu/qemu" repo and not on the forks. This enables the build bot to notify the IRC only for the main repo. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2016-06-08.travis.yml: disable Sparse testingPaolo Bonzini1-3/+0
On travis-ci.org, all builds fail with /usr/include/features.h:324:11: error: unable to open bits/predefs.h With "make docker-travis@ubuntu", they fail with /usr/include/features.h:374:13: error: unable to open sys/cdefs.h With "make docker-travis@fedora", finally, they fail due to sparse not being able to parse some #pragmas in glib headers. Just kill the thing from the CI builds. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AJB: tweak title for my OCD] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2016-06-08.travis.yml: add trusty GCE targetAlex Bennée1-0/+10
If we want to run our docker based tests we'll need to do them on a normal VM with docker support. Lets just enable the build on trusty for now to check against a newer Ubuntu. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
generated by cgit v1.1 at 2024-08-20 17:48:24 +0000