diff options
Diffstat (limited to 'tests/qemu-iotests')
| -rwxr-xr-x | tests/qemu-iotests/185 | 190 | ||||
| -rw-r--r-- | tests/qemu-iotests/185.out | 48 |
2 files changed, 237 insertions, 1 deletions
diff --git a/tests/qemu-iotests/185 b/tests/qemu-iotests/185 index f2ec5c5..8b1143d 100755 --- a/tests/qemu-iotests/185 +++ b/tests/qemu-iotests/185 @@ -33,6 +33,12 @@ _cleanup() _rm_test_img "${TEST_IMG}.copy" _cleanup_test_img _cleanup_qemu + + if [ -f "$TEST_DIR/qsd.pid" ]; then + kill -SIGKILL "$(cat "$TEST_DIR/qsd.pid")" + rm -f "$TEST_DIR/qsd.pid" + fi + rm -f "$SOCK_DIR/qsd.sock" } trap "_cleanup; exit \$status" 0 1 2 3 15 @@ -45,7 +51,7 @@ _supported_fmt qcow2 _supported_proto file _supported_os Linux -size=64M +size=$((64 * 1048576)) TEST_IMG="${TEST_IMG}.base" _make_test_img $size echo @@ -216,6 +222,188 @@ wait=1 _cleanup_qemu | grep -v 'JOB_STATUS_CHANGE' _check_test_img +echo +echo === Start mirror to throttled QSD and exit qemu === +echo + +# Mirror to a throttled QSD instance (so that qemu cannot drain the +# throttling), wait for READY, then write some data to the device, +# and then quit qemu. +# (qemu should force-cancel the job and not wait for the data to be +# written to the target.) + +_make_test_img $size + +# Will be used by this and the next case +set_up_throttled_qsd() { + $QSD \ + --object throttle-group,id=thrgr,limits.bps-total=1048576 \ + --blockdev null-co,node-name=null,size=$size \ + --blockdev throttle,node-name=throttled,throttle-group=thrgr,file=null \ + --nbd-server addr.type=unix,addr.path="$SOCK_DIR/qsd.sock" \ + --export nbd,id=exp,node-name=throttled,name=target,writable=true \ + --pidfile "$TEST_DIR/qsd.pid" \ + --daemonize +} + +set_up_throttled_qsd + +# Need a virtio-blk device so that qemu-io writes will not block the monitor +_launch_qemu \ + --blockdev file,node-name=source-proto,filename="$TEST_IMG" \ + --blockdev qcow2,node-name=source-fmt,file=source-proto \ + --device virtio-blk,id=vblk,drive=source-fmt \ + --blockdev "{\"driver\": \"nbd\", + \"node-name\": \"target\", + \"server\": { + \"type\": \"unix\", + \"path\": \"$SOCK_DIR/qsd.sock\" + }, + \"export\": \"target\"}" + +h=$QEMU_HANDLE +_send_qemu_cmd $h '{"execute": "qmp_capabilities"}' 'return' + +# Use sync=top, so the first pass will not copy the whole image +_send_qemu_cmd $h \ + '{"execute": "blockdev-mirror", + "arguments": { + "job-id": "mirror", + "device": "source-fmt", + "target": "target", + "sync": "top" + }}' \ + 'return' \ + | grep -v JOB_STATUS_CHANGE # Ignore these events during creation + +# This too will be used by this and the next case +# $1: QEMU handle +# $2: Image size +wait_for_job_and_quit() { + h=$1 + size=$2 + + # List of expected events + capture_events='BLOCK_JOB_READY JOB_STATUS_CHANGE' + _wait_event $h 'BLOCK_JOB_READY' + QEMU_EVENTS= # Ignore all JOB_STATUS_CHANGE events that came before READY + + # Write something to the device for post-READY mirroring. Write it in + # blocks matching the cluster size, each spaced one block apart, so + # that the mirror job will have to spawn one request per cluster. + # Because the number of concurrent requests is limited (to 16), this + # limits the number of bytes concurrently in flight, which speeds up + # cancelling the job (in-flight requests still are waited for). + # To limit the number of bytes in flight, we could alternatively pass + # something for blockdev-mirror's @buf-size parameter, but + # block-commit does not have such a parameter, so we need to figure + # something out that works for both. + + cluster_size=65536 + step=$((cluster_size * 2)) + + echo '--- Writing data to the virtio-blk device ---' + + for ofs in $(seq 0 $step $((size - step))); do + qemu_io_cmd="qemu-io -d vblk/virtio-backend " + qemu_io_cmd+="\\\"aio_write $ofs $cluster_size\\\"" + + # Do not include these requests in the reference output + # (it's just too much) + silent=yes _send_qemu_cmd $h \ + "{\"execute\": \"human-monitor-command\", + \"arguments\": { + \"command-line\": \"$qemu_io_cmd\" + }}" \ + 'return' + done + + # Wait until the job's length is updated to reflect the write requests + + # We have written to half of the device, so this is the expected job length + final_len=$((size / 2)) + timeout=100 # unit: 0.1 seconds + while true; do + len=$( + _send_qemu_cmd $h \ + '{"execute": "query-block-jobs"}' \ + 'return.*"len": [0-9]\+' \ + | grep 'return.*"len": [0-9]\+' \ + | sed -e 's/.*"len": \([0-9]\+\).*/\1/' + ) + if [ "$len" -eq "$final_len" ]; then + break + fi + timeout=$((timeout - 1)) + if [ "$timeout" -eq 0 ]; then + echo "ERROR: Timeout waiting for job to reach len=$final_len" + break + fi + sleep 0.1 + done + + sleep 1 + + _send_qemu_cmd $h \ + '{"execute": "quit"}' \ + 'return' + + # List of expected events + capture_events='BLOCK_JOB_CANCELLED JOB_STATUS_CHANGE SHUTDOWN' + _wait_event $h 'SHUTDOWN' + QEMU_EVENTS= # Ignore all JOB_STATUS_CHANGE events that came before SHUTDOWN + _wait_event $h 'JOB_STATUS_CHANGE' # standby + _wait_event $h 'JOB_STATUS_CHANGE' # ready + _wait_event $h 'JOB_STATUS_CHANGE' # aborting + # Filter the offset (depends on when exactly `quit` was issued) + _wait_event $h 'BLOCK_JOB_CANCELLED' \ + | sed -e 's/"offset": [0-9]\+/"offset": (filtered)/' + _wait_event $h 'JOB_STATUS_CHANGE' # concluded + _wait_event $h 'JOB_STATUS_CHANGE' # null + + wait=yes _cleanup_qemu + + kill -SIGTERM "$(cat "$TEST_DIR/qsd.pid")" +} + +wait_for_job_and_quit $h $size + +echo +echo === Start active commit to throttled QSD and exit qemu === +echo + +# Same as the above, but instead of mirroring, do an active commit + +_make_test_img $size + +set_up_throttled_qsd + +_launch_qemu \ + --blockdev "{\"driver\": \"nbd\", + \"node-name\": \"target\", + \"server\": { + \"type\": \"unix\", + \"path\": \"$SOCK_DIR/qsd.sock\" + }, + \"export\": \"target\"}" \ + --blockdev file,node-name=source-proto,filename="$TEST_IMG" \ + --blockdev qcow2,node-name=source-fmt,file=source-proto,backing=target \ + --device virtio-blk,id=vblk,drive=source-fmt + +h=$QEMU_HANDLE +_send_qemu_cmd $h '{"execute": "qmp_capabilities"}' 'return' + +_send_qemu_cmd $h \ + '{"execute": "block-commit", + "arguments": { + "job-id": "commit", + "device": "source-fmt" + }}' \ + 'return' \ + | grep -v JOB_STATUS_CHANGE # Ignore these events during creation + +wait_for_job_and_quit $h $size + # success, all done echo "*** done" rm -f $seq.full diff --git a/tests/qemu-iotests/185.out b/tests/qemu-iotests/185.out index 754a641..70e8dd6 100644 --- a/tests/qemu-iotests/185.out +++ b/tests/qemu-iotests/185.out @@ -116,4 +116,52 @@ Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 cluster_size=65536 extended_l2=off {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN", "data": {"guest": false, "reason": "host-qmp-quit"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 524288, "speed": 65536, "type": "stream"}} No errors were found on the image. + +=== Start mirror to throttled QSD and exit qemu === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +{"execute": "qmp_capabilities"} +{"return": {}} +{"execute": "blockdev-mirror", + "arguments": { + "job-id": "mirror", + "device": "source-fmt", + "target": "target", + "sync": "top" + }} +{"return": {}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_READY", "data": {"device": "mirror", "len": 0, "offset": 0, "speed": 0, "type": "mirror"}} +--- Writing data to the virtio-blk device --- +{"execute": "quit"} +{"return": {}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN", "data": {"guest": false, "reason": "host-qmp-quit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "standby", "id": "mirror"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "mirror"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "aborting", "id": "mirror"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_CANCELLED", "data": {"device": "mirror", "len": 33554432, "offset": (filtered), "speed": 0, "type": "mirror"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "mirror"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "mirror"}} + +=== Start active commit to throttled QSD and exit qemu === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +{"execute": "qmp_capabilities"} +{"return": {}} +{"execute": "block-commit", + "arguments": { + "job-id": "commit", + "device": "source-fmt" + }} +{"return": {}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_READY", "data": {"device": "commit", "len": 0, "offset": 0, "speed": 0, "type": "commit"}} +--- Writing data to the virtio-blk device --- +{"execute": "quit"} +{"return": {}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN", "data": {"guest": false, "reason": "host-qmp-quit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "standby", "id": "commit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "commit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "aborting", "id": "commit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_CANCELLED", "data": {"device": "commit", "len": 33554432, "offset": (filtered), "speed": 0, "type": "commit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "commit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "commit"}} *** done |