diff options
Diffstat (limited to 'qapi-schema.json')
| -rw-r--r-- | qapi-schema.json | 675 |
1 files changed, 1 insertions, 674 deletions
diff --git a/qapi-schema.json b/qapi-schema.json index 4f30d21..e9b61eb 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -84,6 +84,7 @@ { 'include': 'qapi/crypto.json' } { 'include': 'qapi/block.json' } { 'include': 'qapi/char.json' } +{ 'include': 'qapi/net.json' } { 'include': 'qapi/rocker.json' } { 'include': 'qapi/event.json' } { 'include': 'qapi/trace.json' } @@ -2276,33 +2277,6 @@ { 'command': 'inject-nmi' } ## -# @set_link: -# -# Sets the link status of a virtual network adapter. -# -# @name: the device name of the virtual network adapter -# -# @up: true to set the link status to be up -# -# Returns: Nothing on success -# If @name is not a valid network device, DeviceNotFound -# -# Since: 0.14.0 -# -# Notes: Not all network adapters support setting link status. This command -# will succeed even if the network adapter does not support link status -# notification. -# -# Example: -# -# -> { "execute": "set_link", -# "arguments": { "name": "e1000.0", "up": false } } -# <- { "return": {} } -# -## -{ 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} } - -## # @balloon: # # Request the balloon driver to change its balloon size. @@ -3272,60 +3246,6 @@ 'data': { 'filename': 'str' } } ## -# @netdev_add: -# -# Add a network backend. -# -# @type: the type of network backend. Current valid values are 'user', 'tap', -# 'vde', 'socket', 'dump' and 'bridge' -# -# @id: the name of the new network backend -# -# Additional arguments depend on the type. -# -# TODO: This command effectively bypasses QAPI completely due to its -# "additional arguments" business. It shouldn't have been added to -# the schema in this form. It should be qapified properly, or -# replaced by a properly qapified command. -# -# Since: 0.14.0 -# -# Returns: Nothing on success -# If @type is not a valid network backend, DeviceNotFound -# -# Example: -# -# -> { "execute": "netdev_add", -# "arguments": { "type": "user", "id": "netdev1", -# "dnssearch": "example.org" } } -# <- { "return": {} } -# -## -{ 'command': 'netdev_add', - 'data': {'type': 'str', 'id': 'str'}, - 'gen': false } # so we can get the additional arguments - -## -# @netdev_del: -# -# Remove a network backend. -# -# @id: the name of the network backend to remove -# -# Returns: Nothing on success -# If @id is not a valid network backend, DeviceNotFound -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } -# <- { "return": {} } -# -## -{ 'command': 'netdev_del', 'data': {'id': 'str'} } - -## # @object-add: # # Create a QOM object. @@ -3373,491 +3293,6 @@ { 'command': 'object-del', 'data': {'id': 'str'} } ## -# @NetdevNoneOptions: -# -# Use it alone to have zero network devices. -# -# Since: 1.2 -## -{ 'struct': 'NetdevNoneOptions', - 'data': { } } - -## -# @NetLegacyNicOptions: -# -# Create a new Network Interface Card. -# -# @netdev: id of -netdev to connect to -# -# @macaddr: MAC address -# -# @model: device model (e1000, rtl8139, virtio etc.) -# -# @addr: PCI device address -# -# @vectors: number of MSI-x vectors, 0 to disable MSI-X -# -# Since: 1.2 -## -{ 'struct': 'NetLegacyNicOptions', - 'data': { - '*netdev': 'str', - '*macaddr': 'str', - '*model': 'str', - '*addr': 'str', - '*vectors': 'uint32' } } - -## -# @NetdevUserOptions: -# -# Use the user mode network stack which requires no administrator privilege to -# run. -# -# @hostname: client hostname reported by the builtin DHCP server -# -# @restrict: isolate the guest from the host -# -# @ipv4: whether to support IPv4, default true for enabled -# (since 2.6) -# -# @ipv6: whether to support IPv6, default true for enabled -# (since 2.6) -# -# @ip: legacy parameter, use net= instead -# -# @net: IP network address that the guest will see, in the -# form addr[/netmask] The netmask is optional, and can be -# either in the form a.b.c.d or as a number of valid top-most -# bits. Default is 10.0.2.0/24. -# -# @host: guest-visible address of the host -# -# @tftp: root directory of the built-in TFTP server -# -# @bootfile: BOOTP filename, for use with tftp= -# -# @dhcpstart: the first of the 16 IPs the built-in DHCP server can -# assign -# -# @dns: guest-visible address of the virtual nameserver -# -# @dnssearch: list of DNS suffixes to search, passed as DHCP option -# to the guest -# -# @ipv6-prefix: IPv6 network prefix (default is fec0::) (since -# 2.6). The network prefix is given in the usual -# hexadecimal IPv6 address notation. -# -# @ipv6-prefixlen: IPv6 network prefix length (default is 64) -# (since 2.6) -# -# @ipv6-host: guest-visible IPv6 address of the host (since 2.6) -# -# @ipv6-dns: guest-visible IPv6 address of the virtual -# nameserver (since 2.6) -# -# @smb: root directory of the built-in SMB server -# -# @smbserver: IP address of the built-in SMB server -# -# @hostfwd: redirect incoming TCP or UDP host connections to guest -# endpoints -# -# @guestfwd: forward guest TCP connections -# -# Since: 1.2 -## -{ 'struct': 'NetdevUserOptions', - 'data': { - '*hostname': 'str', - '*restrict': 'bool', - '*ipv4': 'bool', - '*ipv6': 'bool', - '*ip': 'str', - '*net': 'str', - '*host': 'str', - '*tftp': 'str', - '*bootfile': 'str', - '*dhcpstart': 'str', - '*dns': 'str', - '*dnssearch': ['String'], - '*ipv6-prefix': 'str', - '*ipv6-prefixlen': 'int', - '*ipv6-host': 'str', - '*ipv6-dns': 'str', - '*smb': 'str', - '*smbserver': 'str', - '*hostfwd': ['String'], - '*guestfwd': ['String'] } } - -## -# @NetdevTapOptions: -# -# Connect the host TAP network interface name to the VLAN. -# -# @ifname: interface name -# -# @fd: file descriptor of an already opened tap -# -# @fds: multiple file descriptors of already opened multiqueue capable -# tap -# -# @script: script to initialize the interface -# -# @downscript: script to shut down the interface -# -# @br: bridge name (since 2.8) -# -# @helper: command to execute to configure bridge -# -# @sndbuf: send buffer limit. Understands [TGMKkb] suffixes. -# -# @vnet_hdr: enable the IFF_VNET_HDR flag on the tap interface -# -# @vhost: enable vhost-net network accelerator -# -# @vhostfd: file descriptor of an already opened vhost net device -# -# @vhostfds: file descriptors of multiple already opened vhost net -# devices -# -# @vhostforce: vhost on for non-MSIX virtio guests -# -# @queues: number of queues to be created for multiqueue capable tap -# -# @poll-us: maximum number of microseconds that could -# be spent on busy polling for tap (since 2.7) -# -# Since: 1.2 -## -{ 'struct': 'NetdevTapOptions', - 'data': { - '*ifname': 'str', - '*fd': 'str', - '*fds': 'str', - '*script': 'str', - '*downscript': 'str', - '*br': 'str', - '*helper': 'str', - '*sndbuf': 'size', - '*vnet_hdr': 'bool', - '*vhost': 'bool', - '*vhostfd': 'str', - '*vhostfds': 'str', - '*vhostforce': 'bool', - '*queues': 'uint32', - '*poll-us': 'uint32'} } - -## -# @NetdevSocketOptions: -# -# Connect the VLAN to a remote VLAN in another QEMU virtual machine using a TCP -# socket connection. -# -# @fd: file descriptor of an already opened socket -# -# @listen: port number, and optional hostname, to listen on -# -# @connect: port number, and optional hostname, to connect to -# -# @mcast: UDP multicast address and port number -# -# @localaddr: source address and port for multicast and udp packets -# -# @udp: UDP unicast address and port number -# -# Since: 1.2 -## -{ 'struct': 'NetdevSocketOptions', - 'data': { - '*fd': 'str', - '*listen': 'str', - '*connect': 'str', - '*mcast': 'str', - '*localaddr': 'str', - '*udp': 'str' } } - -## -# @NetdevL2TPv3Options: -# -# Connect the VLAN to Ethernet over L2TPv3 Static tunnel -# -# @src: source address -# -# @dst: destination address -# -# @srcport: source port - mandatory for udp, optional for ip -# -# @dstport: destination port - mandatory for udp, optional for ip -# -# @ipv6: force the use of ipv6 -# -# @udp: use the udp version of l2tpv3 encapsulation -# -# @cookie64: use 64 bit coookies -# -# @counter: have sequence counter -# -# @pincounter: pin sequence counter to zero - -# workaround for buggy implementations or -# networks with packet reorder -# -# @txcookie: 32 or 64 bit transmit cookie -# -# @rxcookie: 32 or 64 bit receive cookie -# -# @txsession: 32 bit transmit session -# -# @rxsession: 32 bit receive session - if not specified -# set to the same value as transmit -# -# @offset: additional offset - allows the insertion of -# additional application-specific data before the packet payload -# -# Since: 2.1 -## -{ 'struct': 'NetdevL2TPv3Options', - 'data': { - 'src': 'str', - 'dst': 'str', - '*srcport': 'str', - '*dstport': 'str', - '*ipv6': 'bool', - '*udp': 'bool', - '*cookie64': 'bool', - '*counter': 'bool', - '*pincounter': 'bool', - '*txcookie': 'uint64', - '*rxcookie': 'uint64', - 'txsession': 'uint32', - '*rxsession': 'uint32', - '*offset': 'uint32' } } - -## -# @NetdevVdeOptions: -# -# Connect the VLAN to a vde switch running on the host. -# -# @sock: socket path -# -# @port: port number -# -# @group: group owner of socket -# -# @mode: permissions for socket -# -# Since: 1.2 -## -{ 'struct': 'NetdevVdeOptions', - 'data': { - '*sock': 'str', - '*port': 'uint16', - '*group': 'str', - '*mode': 'uint16' } } - -## -# @NetdevDumpOptions: -# -# Dump VLAN network traffic to a file. -# -# @len: per-packet size limit (64k default). Understands [TGMKkb] -# suffixes. -# -# @file: dump file path (default is qemu-vlan0.pcap) -# -# Since: 1.2 -## -{ 'struct': 'NetdevDumpOptions', - 'data': { - '*len': 'size', - '*file': 'str' } } - -## -# @NetdevBridgeOptions: -# -# Connect a host TAP network interface to a host bridge device. -# -# @br: bridge name -# -# @helper: command to execute to configure bridge -# -# Since: 1.2 -## -{ 'struct': 'NetdevBridgeOptions', - 'data': { - '*br': 'str', - '*helper': 'str' } } - -## -# @NetdevHubPortOptions: -# -# Connect two or more net clients through a software hub. -# -# @hubid: hub identifier number -# -# Since: 1.2 -## -{ 'struct': 'NetdevHubPortOptions', - 'data': { - 'hubid': 'int32' } } - -## -# @NetdevNetmapOptions: -# -# Connect a client to a netmap-enabled NIC or to a VALE switch port -# -# @ifname: Either the name of an existing network interface supported by -# netmap, or the name of a VALE port (created on the fly). -# A VALE port name is in the form 'valeXXX:YYY', where XXX and -# YYY are non-negative integers. XXX identifies a switch and -# YYY identifies a port of the switch. VALE ports having the -# same XXX are therefore connected to the same switch. -# -# @devname: path of the netmap device (default: '/dev/netmap'). -# -# Since: 2.0 -## -{ 'struct': 'NetdevNetmapOptions', - 'data': { - 'ifname': 'str', - '*devname': 'str' } } - -## -# @NetdevVhostUserOptions: -# -# Vhost-user network backend -# -# @chardev: name of a unix socket chardev -# -# @vhostforce: vhost on for non-MSIX virtio guests (default: false). -# -# @queues: number of queues to be created for multiqueue vhost-user -# (default: 1) (Since 2.5) -# -# Since: 2.1 -## -{ 'struct': 'NetdevVhostUserOptions', - 'data': { - 'chardev': 'str', - '*vhostforce': 'bool', - '*queues': 'int' } } - -## -# @NetClientDriver: -# -# Available netdev drivers. -# -# Since: 2.7 -## -{ 'enum': 'NetClientDriver', - 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde', 'dump', - 'bridge', 'hubport', 'netmap', 'vhost-user' ] } - -## -# @Netdev: -# -# Captures the configuration of a network device. -# -# @id: identifier for monitor commands. -# -# @type: Specify the driver used for interpreting remaining arguments. -# -# Since: 1.2 -# -# 'l2tpv3' - since 2.1 -## -{ 'union': 'Netdev', - 'base': { 'id': 'str', 'type': 'NetClientDriver' }, - 'discriminator': 'type', - 'data': { - 'none': 'NetdevNoneOptions', - 'nic': 'NetLegacyNicOptions', - 'user': 'NetdevUserOptions', - 'tap': 'NetdevTapOptions', - 'l2tpv3': 'NetdevL2TPv3Options', - 'socket': 'NetdevSocketOptions', - 'vde': 'NetdevVdeOptions', - 'dump': 'NetdevDumpOptions', - 'bridge': 'NetdevBridgeOptions', - 'hubport': 'NetdevHubPortOptions', - 'netmap': 'NetdevNetmapOptions', - 'vhost-user': 'NetdevVhostUserOptions' } } - -## -# @NetLegacy: -# -# Captures the configuration of a network device; legacy. -# -# @vlan: vlan number -# -# @id: identifier for monitor commands -# -# @name: identifier for monitor commands, ignored if @id is present -# -# @opts: device type specific properties (legacy) -# -# Since: 1.2 -## -{ 'struct': 'NetLegacy', - 'data': { - '*vlan': 'int32', - '*id': 'str', - '*name': 'str', - 'opts': 'NetLegacyOptions' } } - -## -# @NetLegacyOptionsType: -# -# Since: 1.2 -## -{ 'enum': 'NetLegacyOptionsType', - 'data': ['none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde', - 'dump', 'bridge', 'netmap', 'vhost-user'] } - -## -# @NetLegacyOptions: -# -# Like Netdev, but for use only by the legacy command line options -# -# Since: 1.2 -## -{ 'union': 'NetLegacyOptions', - 'base': { 'type': 'NetLegacyOptionsType' }, - 'discriminator': 'type', - 'data': { - 'none': 'NetdevNoneOptions', - 'nic': 'NetLegacyNicOptions', - 'user': 'NetdevUserOptions', - 'tap': 'NetdevTapOptions', - 'l2tpv3': 'NetdevL2TPv3Options', - 'socket': 'NetdevSocketOptions', - 'vde': 'NetdevVdeOptions', - 'dump': 'NetdevDumpOptions', - 'bridge': 'NetdevBridgeOptions', - 'netmap': 'NetdevNetmapOptions', - 'vhost-user': 'NetdevVhostUserOptions' } } - -## -# @NetFilterDirection: -# -# Indicates whether a netfilter is attached to a netdev's transmit queue or -# receive queue or both. -# -# @all: the filter is attached both to the receive and the transmit -# queue of the netdev (default). -# -# @rx: the filter is attached to the receive queue of the netdev, -# where it will receive packets sent to the netdev. -# -# @tx: the filter is attached to the transmit queue of the netdev, -# where it will receive packets sent by the netdev. -# -# Since: 2.5 -## -{ 'enum': 'NetFilterDirection', - 'data': [ 'all', 'rx', 'tx' ] } - -## # @getfd: # # Receive a file descriptor via SCM rights and assign it a name @@ -4854,114 +4289,6 @@ ## -# @RxState: -# -# Packets receiving state -# -# @normal: filter assigned packets according to the mac-table -# -# @none: don't receive any assigned packet -# -# @all: receive all assigned packets -# -# Since: 1.6 -## -{ 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] } - -## -# @RxFilterInfo: -# -# Rx-filter information for a NIC. -# -# @name: net client name -# -# @promiscuous: whether promiscuous mode is enabled -# -# @multicast: multicast receive state -# -# @unicast: unicast receive state -# -# @vlan: vlan receive state (Since 2.0) -# -# @broadcast-allowed: whether to receive broadcast -# -# @multicast-overflow: multicast table is overflowed or not -# -# @unicast-overflow: unicast table is overflowed or not -# -# @main-mac: the main macaddr string -# -# @vlan-table: a list of active vlan id -# -# @unicast-table: a list of unicast macaddr string -# -# @multicast-table: a list of multicast macaddr string -# -# Since: 1.6 -## -{ 'struct': 'RxFilterInfo', - 'data': { - 'name': 'str', - 'promiscuous': 'bool', - 'multicast': 'RxState', - 'unicast': 'RxState', - 'vlan': 'RxState', - 'broadcast-allowed': 'bool', - 'multicast-overflow': 'bool', - 'unicast-overflow': 'bool', - 'main-mac': 'str', - 'vlan-table': ['int'], - 'unicast-table': ['str'], - 'multicast-table': ['str'] }} - -## -# @query-rx-filter: -# -# Return rx-filter information for all NICs (or for the given NIC). -# -# @name: net client name -# -# Returns: list of @RxFilterInfo for all NICs (or for the given NIC). -# Returns an error if the given @name doesn't exist, or given -# NIC doesn't support rx-filter querying, or given net client -# isn't a NIC. -# -# Since: 1.6 -# -# Example: -# -# -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } } -# <- { "return": [ -# { -# "promiscuous": true, -# "name": "vnet0", -# "main-mac": "52:54:00:12:34:56", -# "unicast": "normal", -# "vlan": "normal", -# "vlan-table": [ -# 4, -# 0 -# ], -# "unicast-table": [ -# ], -# "multicast": "normal", -# "multicast-overflow": false, -# "unicast-overflow": false, -# "multicast-table": [ -# "01:00:5e:00:00:01", -# "33:33:00:00:00:01", -# "33:33:ff:12:34:56" -# ], -# "broadcast-allowed": false -# } -# ] -# } -# -## -{ 'command': 'query-rx-filter', 'data': { '*name': 'str' }, - 'returns': ['RxFilterInfo'] } - -## # @InputButton: # # Button of a pointer input device (mouse, tablet). |