diff options
Diffstat (limited to 'include')
26 files changed, 641 insertions, 211 deletions
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index 35d8e93..227e10b 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -40,8 +40,6 @@ typedef ram_addr_t tb_page_addr_t; #define TB_PAGE_ADDR_FMT RAM_ADDR_FMT #endif -#include "qemu/log.h" - void gen_intermediate_code(CPUState *cpu, TranslationBlock *tb, int max_insns); void restore_state_to_opc(CPUArchState *env, TranslationBlock *tb, target_ulong *data); diff --git a/include/exec/ramblock.h b/include/exec/ramblock.h index 664701b..6cbedf9 100644 --- a/include/exec/ramblock.h +++ b/include/exec/ramblock.h @@ -21,6 +21,8 @@ #ifndef CONFIG_USER_ONLY #include "cpu-common.h" +#include "qemu/rcu.h" +#include "exec/ramlist.h" struct RAMBlock { struct rcu_head rcu; diff --git a/include/hw/m68k/mcf.h b/include/hw/m68k/mcf.h index decf17c..8cbd587 100644 --- a/include/hw/m68k/mcf.h +++ b/include/hw/m68k/mcf.h @@ -2,6 +2,7 @@ #define HW_MCF_H /* Motorola ColdFire device prototypes. */ +#include "exec/hwaddr.h" #include "target/m68k/cpu-qom.h" /* mcf_uart.c */ diff --git a/include/hw/mem/nvdimm.h b/include/hw/mem/nvdimm.h index bcf62f8..cf8f59b 100644 --- a/include/hw/mem/nvdimm.h +++ b/include/hw/mem/nvdimm.h @@ -103,6 +103,8 @@ struct NVDIMMClass { /* write @size bytes from @buf to NVDIMM label data at @offset. */ void (*write_label_data)(NVDIMMDevice *nvdimm, const void *buf, uint64_t size, uint64_t offset); + void (*realize)(NVDIMMDevice *nvdimm, Error **errp); + void (*unrealize)(NVDIMMDevice *nvdimm); }; #define NVDIMM_DSM_MEM_FILE "etc/acpi/nvdimm-mem" diff --git a/include/hw/mem/pc-dimm.h b/include/hw/mem/pc-dimm.h index 1473e6d..322bebe 100644 --- a/include/hw/mem/pc-dimm.h +++ b/include/hw/mem/pc-dimm.h @@ -63,6 +63,7 @@ struct PCDIMMDeviceClass { /* public */ void (*realize)(PCDIMMDevice *dimm, Error **errp); + void (*unrealize)(PCDIMMDevice *dimm); }; void pc_dimm_pre_plug(PCDIMMDevice *dimm, MachineState *machine, diff --git a/include/hw/ppc/ppc.h b/include/hw/ppc/ppc.h index 93e614c..b0ba4bd 100644 --- a/include/hw/ppc/ppc.h +++ b/include/hw/ppc/ppc.h @@ -54,6 +54,9 @@ struct ppc_tb_t { uint64_t cpu_ppc_get_tb(ppc_tb_t *tb_env, uint64_t vmclk, int64_t tb_offset); clk_setup_cb cpu_ppc_tb_init (CPUPPCState *env, uint32_t freq); +void cpu_ppc_hdecr_init(CPUPPCState *env); +void cpu_ppc_hdecr_exit(CPUPPCState *env); + /* Embedded PowerPC DCR management */ typedef uint32_t (*dcr_read_cb)(void *opaque, int dcrn); typedef void (*dcr_write_cb)(void *opaque, int dcrn, uint32_t val); diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h index ee7504b..f5c33dc 100644 --- a/include/hw/ppc/spapr.h +++ b/include/hw/ppc/spapr.h @@ -197,6 +197,9 @@ struct SpaprMachineState { bool has_graphics; uint32_t vsmt; /* Virtual SMT mode (KVM's "core stride") */ + /* Nested HV support (TCG only) */ + uint64_t nested_ptcr; + Notifier epow_notifier; QTAILQ_HEAD(, SpaprEventLogEntry) pending_events; bool use_hotplug_event_source; @@ -341,6 +344,7 @@ struct SpaprMachineState { #define H_P7 -60 #define H_P8 -61 #define H_P9 -62 +#define H_UNSUPPORTED -67 #define H_OVERLAP -68 #define H_UNSUPPORTED_FLAG -256 #define H_MULTI_THREADS_ACTIVE -9005 @@ -559,8 +563,9 @@ struct SpaprMachineState { #define H_SCM_UNBIND_ALL 0x3FC #define H_SCM_HEALTH 0x400 #define H_RPT_INVALIDATE 0x448 +#define H_SCM_FLUSH 0x44C -#define MAX_HCALL_OPCODE H_RPT_INVALIDATE +#define MAX_HCALL_OPCODE H_SCM_FLUSH /* The hcalls above are standardized in PAPR and implemented by pHyp * as well. @@ -577,7 +582,14 @@ struct SpaprMachineState { #define KVMPPC_H_UPDATE_DT (KVMPPC_HCALL_BASE + 0x3) /* 0x4 was used for KVMPPC_H_UPDATE_PHANDLE in SLOF */ #define KVMPPC_H_VOF_CLIENT (KVMPPC_HCALL_BASE + 0x5) -#define KVMPPC_HCALL_MAX KVMPPC_H_VOF_CLIENT + +/* Platform-specific hcalls used for nested HV KVM */ +#define KVMPPC_H_SET_PARTITION_TABLE (KVMPPC_HCALL_BASE + 0x800) +#define KVMPPC_H_ENTER_NESTED (KVMPPC_HCALL_BASE + 0x804) +#define KVMPPC_H_TLB_INVALIDATE (KVMPPC_HCALL_BASE + 0x808) +#define KVMPPC_H_COPY_TOFROM_GUEST (KVMPPC_HCALL_BASE + 0x80C) + +#define KVMPPC_HCALL_MAX KVMPPC_H_COPY_TOFROM_GUEST /* * The hcall range 0xEF00 to 0xEF80 is reserved for use in facilitating @@ -587,6 +599,65 @@ struct SpaprMachineState { #define SVM_H_TPM_COMM 0xEF10 #define SVM_HCALL_MAX SVM_H_TPM_COMM +/* + * Register state for entering a nested guest with H_ENTER_NESTED. + * New member must be added at the end. + */ +struct kvmppc_hv_guest_state { + uint64_t version; /* version of this structure layout, must be first */ + uint32_t lpid; + uint32_t vcpu_token; + /* These registers are hypervisor privileged (at least for writing) */ + uint64_t lpcr; + uint64_t pcr; + uint64_t amor; + uint64_t dpdes; + uint64_t hfscr; + int64_t tb_offset; + uint64_t dawr0; + uint64_t dawrx0; + uint64_t ciabr; + uint64_t hdec_expiry; + uint64_t purr; + uint64_t spurr; + uint64_t ic; + uint64_t vtb; + uint64_t hdar; + uint64_t hdsisr; + uint64_t heir; + uint64_t asdr; + /* These are OS privileged but need to be set late in guest entry */ + uint64_t srr0; + uint64_t srr1; + uint64_t sprg[4]; + uint64_t pidr; + uint64_t cfar; + uint64_t ppr; + /* Version 1 ends here */ + uint64_t dawr1; + uint64_t dawrx1; + /* Version 2 ends here */ +}; + +/* Latest version of hv_guest_state structure */ +#define HV_GUEST_STATE_VERSION 2 + +/* Linux 64-bit powerpc pt_regs struct, used by nested HV */ +struct kvmppc_pt_regs { + uint64_t gpr[32]; + uint64_t nip; + uint64_t msr; + uint64_t orig_gpr3; /* Used for restarting system calls */ + uint64_t ctr; + uint64_t link; + uint64_t xer; + uint64_t ccr; + uint64_t softe; /* Soft enabled/disabled */ + uint64_t trap; /* Reason for being here */ + uint64_t dar; /* Fault registers */ + uint64_t dsisr; /* on 4xx/Book-E used for ESR */ + uint64_t result; /* Result of a system call */ +}; typedef struct SpaprDeviceTreeUpdateHeader { uint32_t version_id; @@ -604,6 +675,9 @@ typedef target_ulong (*spapr_hcall_fn)(PowerPCCPU *cpu, SpaprMachineState *sm, void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn); target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode, target_ulong *args); + +void spapr_exit_nested(PowerPCCPU *cpu, int excp); + target_ulong softmmu_resize_hpt_prepare(PowerPCCPU *cpu, SpaprMachineState *spapr, target_ulong shift); target_ulong softmmu_resize_hpt_commit(PowerPCCPU *cpu, SpaprMachineState *spapr, diff --git a/include/hw/ppc/spapr_cpu_core.h b/include/hw/ppc/spapr_cpu_core.h index dab3dfc..b560514 100644 --- a/include/hw/ppc/spapr_cpu_core.h +++ b/include/hw/ppc/spapr_cpu_core.h @@ -48,6 +48,11 @@ typedef struct SpaprCpuState { bool prod; /* not migrated, only used to improve dispatch latencies */ struct ICPState *icp; struct XiveTCTX *tctx; + + /* Fields for nested-HV support */ + bool in_nested; /* true while the L2 is executing */ + CPUPPCState *nested_host_state; /* holds the L1 state while L2 executes */ + int64_t nested_tb_offset; /* L1->L2 TB offset */ } SpaprCpuState; static inline SpaprCpuState *spapr_cpu_state(PowerPCCPU *cpu) diff --git a/include/hw/ppc/spapr_nvdimm.h b/include/hw/ppc/spapr_nvdimm.h index 764f999..e9436cb 100644 --- a/include/hw/ppc/spapr_nvdimm.h +++ b/include/hw/ppc/spapr_nvdimm.h @@ -21,5 +21,6 @@ void spapr_dt_persistent_memory(SpaprMachineState *spapr, void *fdt); bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice *nvdimm, uint64_t size, Error **errp); void spapr_add_nvdimm(DeviceState *dev, uint64_t slot); +void spapr_nvdimm_finish_flushes(void); #endif diff --git a/include/hw/tricore/triboard.h b/include/hw/tricore/triboard.h index f3844be..094c8bd 100644 --- a/include/hw/tricore/triboard.h +++ b/include/hw/tricore/triboard.h @@ -21,7 +21,6 @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/boards.h" -#include "hw/arm/boot.h" #include "sysemu/sysemu.h" #include "exec/address-spaces.h" #include "qom/object.h" diff --git a/include/qemu/cacheinfo.h b/include/qemu/cacheinfo.h new file mode 100644 index 0000000..019a157 --- /dev/null +++ b/include/qemu/cacheinfo.h @@ -0,0 +1,21 @@ +/* + * QEMU host cacheinfo information + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ +#ifndef QEMU_CACHEINFO_H +#define QEMU_CACHEINFO_H + +/* + * These variables represent our best guess at the host icache and + * dcache sizes, expressed both as the size in bytes and as the + * base-2 log of the size in bytes. They are initialized at startup + * (via an attribute 'constructor' function). + */ +extern int qemu_icache_linesize; +extern int qemu_icache_linesize_log; +extern int qemu_dcache_linesize; +extern int qemu_dcache_linesize_log; + +#endif diff --git a/include/qemu/hw-version.h b/include/qemu/hw-version.h new file mode 100644 index 0000000..730a8c9 --- /dev/null +++ b/include/qemu/hw-version.h @@ -0,0 +1,27 @@ +/* + * QEMU "hardware version" machinery + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ +#ifndef QEMU_HW_VERSION_H +#define QEMU_HW_VERSION_H + +/* + * Starting on QEMU 2.5, qemu_hw_version() returns "2.5+" by default + * instead of QEMU_VERSION, so setting hw_version on MachineClass + * is no longer mandatory. + * + * Do NOT change this string, or it will break compatibility on all + * machine classes that don't set hw_version. + */ +#define QEMU_HW_VERSION "2.5+" + +/* QEMU "hardware version" setting. Used to replace code that exposed + * QEMU_VERSION to guests in the past and need to keep compatibility. + * Do not use qemu_hw_version() in new code. + */ +void qemu_set_hw_version(const char *); +const char *qemu_hw_version(void); + +#endif diff --git a/include/qemu/madvise.h b/include/qemu/madvise.h new file mode 100644 index 0000000..e155f59 --- /dev/null +++ b/include/qemu/madvise.h @@ -0,0 +1,95 @@ +/* + * QEMU madvise wrapper functions + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef QEMU_MADVISE_H +#define QEMU_MADVISE_H + +#define QEMU_MADV_INVALID -1 + +#if defined(CONFIG_MADVISE) + +#define QEMU_MADV_WILLNEED MADV_WILLNEED +#define QEMU_MADV_DONTNEED MADV_DONTNEED +#ifdef MADV_DONTFORK +#define QEMU_MADV_DONTFORK MADV_DONTFORK +#else +#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID +#endif +#ifdef MADV_MERGEABLE +#define QEMU_MADV_MERGEABLE MADV_MERGEABLE +#else +#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID +#endif +#ifdef MADV_UNMERGEABLE +#define QEMU_MADV_UNMERGEABLE MADV_UNMERGEABLE +#else +#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID +#endif +#ifdef MADV_DODUMP +#define QEMU_MADV_DODUMP MADV_DODUMP +#else +#define QEMU_MADV_DODUMP QEMU_MADV_INVALID +#endif +#ifdef MADV_DONTDUMP +#define QEMU_MADV_DONTDUMP MADV_DONTDUMP +#else +#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID +#endif +#ifdef MADV_HUGEPAGE +#define QEMU_MADV_HUGEPAGE MADV_HUGEPAGE +#else +#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID +#endif +#ifdef MADV_NOHUGEPAGE +#define QEMU_MADV_NOHUGEPAGE MADV_NOHUGEPAGE +#else +#define QEMU_MADV_NOHUGEPAGE QEMU_MADV_INVALID +#endif +#ifdef MADV_REMOVE +#define QEMU_MADV_REMOVE MADV_REMOVE +#else +#define QEMU_MADV_REMOVE QEMU_MADV_DONTNEED +#endif +#ifdef MADV_POPULATE_WRITE +#define QEMU_MADV_POPULATE_WRITE MADV_POPULATE_WRITE +#else +#define QEMU_MADV_POPULATE_WRITE QEMU_MADV_INVALID +#endif + +#elif defined(CONFIG_POSIX_MADVISE) + +#define QEMU_MADV_WILLNEED POSIX_MADV_WILLNEED +#define QEMU_MADV_DONTNEED POSIX_MADV_DONTNEED +#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID +#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID +#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID +#define QEMU_MADV_DODUMP QEMU_MADV_INVALID +#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID +#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID +#define QEMU_MADV_NOHUGEPAGE QEMU_MADV_INVALID +#define QEMU_MADV_REMOVE QEMU_MADV_DONTNEED +#define QEMU_MADV_POPULATE_WRITE QEMU_MADV_INVALID + +#else /* no-op */ + +#define QEMU_MADV_WILLNEED QEMU_MADV_INVALID +#define QEMU_MADV_DONTNEED QEMU_MADV_INVALID +#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID +#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID +#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID +#define QEMU_MADV_DODUMP QEMU_MADV_INVALID +#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID +#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID +#define QEMU_MADV_NOHUGEPAGE QEMU_MADV_INVALID +#define QEMU_MADV_REMOVE QEMU_MADV_INVALID +#define QEMU_MADV_POPULATE_WRITE QEMU_MADV_INVALID + +#endif + +int qemu_madvise(void *addr, size_t len, int advice); + +#endif diff --git a/include/qemu/mmap-alloc.h b/include/qemu/mmap-alloc.h index 90d0eee..5076695 100644 --- a/include/qemu/mmap-alloc.h +++ b/include/qemu/mmap-alloc.h @@ -35,4 +35,27 @@ void *qemu_ram_mmap(int fd, void qemu_ram_munmap(int fd, void *ptr, size_t size); +/* + * Abstraction of PROT_ and MAP_ flags as passed to mmap(), for example, + * consumed by qemu_ram_mmap(). + */ + +/* Map PROT_READ instead of PROT_READ | PROT_WRITE. */ +#define QEMU_MAP_READONLY (1 << 0) + +/* Use MAP_SHARED instead of MAP_PRIVATE. */ +#define QEMU_MAP_SHARED (1 << 1) + +/* + * Use MAP_SYNC | MAP_SHARED_VALIDATE if supported. Ignored without + * QEMU_MAP_SHARED. If mapping fails, warn and fallback to !QEMU_MAP_SYNC. + */ +#define QEMU_MAP_SYNC (1 << 2) + +/* + * Use MAP_NORESERVE to skip reservation of swap space (or huge pages if + * applicable). Bail out if not supported/effective. + */ +#define QEMU_MAP_NORESERVE (1 << 3) + #endif diff --git a/include/qemu/mprotect.h b/include/qemu/mprotect.h new file mode 100644 index 0000000..1e83d14 --- /dev/null +++ b/include/qemu/mprotect.h @@ -0,0 +1,14 @@ +/* + * QEMU mprotect functions + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ +#ifndef QEMU_MPROTECT_H +#define QEMU_MPROTECT_H + +int qemu_mprotect_rw(void *addr, size_t size); +int qemu_mprotect_rwx(void *addr, size_t size); +int qemu_mprotect_none(void *addr, size_t size); + +#endif diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index d1660d6..7bcce3b 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -401,112 +401,6 @@ static inline void qemu_cleanup_generic_vfree(void *p) */ #define QEMU_AUTO_VFREE __attribute__((cleanup(qemu_cleanup_generic_vfree))) -/* - * Abstraction of PROT_ and MAP_ flags as passed to mmap(), for example, - * consumed by qemu_ram_mmap(). - */ - -/* Map PROT_READ instead of PROT_READ | PROT_WRITE. */ -#define QEMU_MAP_READONLY (1 << 0) - -/* Use MAP_SHARED instead of MAP_PRIVATE. */ -#define QEMU_MAP_SHARED (1 << 1) - -/* - * Use MAP_SYNC | MAP_SHARED_VALIDATE if supported. Ignored without - * QEMU_MAP_SHARED. If mapping fails, warn and fallback to !QEMU_MAP_SYNC. - */ -#define QEMU_MAP_SYNC (1 << 2) - -/* - * Use MAP_NORESERVE to skip reservation of swap space (or huge pages if - * applicable). Bail out if not supported/effective. - */ -#define QEMU_MAP_NORESERVE (1 << 3) - - -#define QEMU_MADV_INVALID -1 - -#if defined(CONFIG_MADVISE) - -#define QEMU_MADV_WILLNEED MADV_WILLNEED -#define QEMU_MADV_DONTNEED MADV_DONTNEED -#ifdef MADV_DONTFORK -#define QEMU_MADV_DONTFORK MADV_DONTFORK -#else -#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID -#endif -#ifdef MADV_MERGEABLE -#define QEMU_MADV_MERGEABLE MADV_MERGEABLE -#else -#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID -#endif -#ifdef MADV_UNMERGEABLE -#define QEMU_MADV_UNMERGEABLE MADV_UNMERGEABLE -#else -#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID -#endif -#ifdef MADV_DODUMP -#define QEMU_MADV_DODUMP MADV_DODUMP -#else -#define QEMU_MADV_DODUMP QEMU_MADV_INVALID -#endif -#ifdef MADV_DONTDUMP -#define QEMU_MADV_DONTDUMP MADV_DONTDUMP -#else -#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID -#endif -#ifdef MADV_HUGEPAGE -#define QEMU_MADV_HUGEPAGE MADV_HUGEPAGE -#else -#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID -#endif -#ifdef MADV_NOHUGEPAGE -#define QEMU_MADV_NOHUGEPAGE MADV_NOHUGEPAGE -#else -#define QEMU_MADV_NOHUGEPAGE QEMU_MADV_INVALID -#endif -#ifdef MADV_REMOVE -#define QEMU_MADV_REMOVE MADV_REMOVE -#else -#define QEMU_MADV_REMOVE QEMU_MADV_DONTNEED -#endif -#ifdef MADV_POPULATE_WRITE -#define QEMU_MADV_POPULATE_WRITE MADV_POPULATE_WRITE -#else -#define QEMU_MADV_POPULATE_WRITE QEMU_MADV_INVALID -#endif - -#elif defined(CONFIG_POSIX_MADVISE) - -#define QEMU_MADV_WILLNEED POSIX_MADV_WILLNEED -#define QEMU_MADV_DONTNEED POSIX_MADV_DONTNEED -#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID -#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID -#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID -#define QEMU_MADV_DODUMP QEMU_MADV_INVALID -#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID -#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID -#define QEMU_MADV_NOHUGEPAGE QEMU_MADV_INVALID -#define QEMU_MADV_REMOVE QEMU_MADV_DONTNEED -#define QEMU_MADV_POPULATE_WRITE QEMU_MADV_INVALID - -#else /* no-op */ - -#define QEMU_MADV_WILLNEED QEMU_MADV_INVALID -#define QEMU_MADV_DONTNEED QEMU_MADV_INVALID -#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID -#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID -#define QEMU_MADV_UNMERGEABLE QEMU_MADV_INVALID -#define QEMU_MADV_DODUMP QEMU_MADV_INVALID -#define QEMU_MADV_DONTDUMP QEMU_MADV_INVALID -#define QEMU_MADV_HUGEPAGE QEMU_MADV_INVALID -#define QEMU_MADV_NOHUGEPAGE QEMU_MADV_INVALID -#define QEMU_MADV_REMOVE QEMU_MADV_INVALID -#define QEMU_MADV_POPULATE_WRITE QEMU_MADV_INVALID - -#endif - #ifdef _WIN32 #define HAVE_CHARDEV_SERIAL 1 #elif defined(__linux__) || defined(__sun__) || defined(__FreeBSD__) \ @@ -577,11 +471,6 @@ void sigaction_invoke(struct sigaction *action, struct qemu_signalfd_siginfo *info); #endif -int qemu_madvise(void *addr, size_t len, int advice); -int qemu_mprotect_rw(void *addr, size_t size); -int qemu_mprotect_rwx(void *addr, size_t size); -int qemu_mprotect_none(void *addr, size_t size); - /* * Don't introduce new usage of this function, prefer the following * qemu_open/qemu_create that take an "Error **errp" @@ -645,22 +534,6 @@ static inline void qemu_timersub(const struct timeval *val1, void qemu_set_cloexec(int fd); -/* Starting on QEMU 2.5, qemu_hw_version() returns "2.5+" by default - * instead of QEMU_VERSION, so setting hw_version on MachineClass - * is no longer mandatory. - * - * Do NOT change this string, or it will break compatibility on all - * machine classes that don't set hw_version. - */ -#define QEMU_HW_VERSION "2.5+" - -/* QEMU "hardware version" setting. Used to replace code that exposed - * QEMU_VERSION to guests in the past and need to keep compatibility. - * Do not use qemu_hw_version() in new code. - */ -void qemu_set_hw_version(const char *); -const char *qemu_hw_version(void); - void fips_set_state(bool requested); bool fips_get_state(void); @@ -727,11 +600,6 @@ pid_t qemu_fork(Error **errp); extern uintptr_t qemu_real_host_page_size; extern intptr_t qemu_real_host_page_mask; -extern int qemu_icache_linesize; -extern int qemu_icache_linesize_log; -extern int qemu_dcache_linesize; -extern int qemu_dcache_linesize_log; - /* * After using getopt or getopt_long, if you need to parse another set * of options, then you must reset optind. Unfortunately the way to @@ -805,6 +673,19 @@ static inline int platform_does_not_support_system(const char *command) } #endif /* !HAVE_SYSTEM_FUNCTION */ +/** + * Duplicate directory entry @dent. + * + * It is highly recommended to use this function instead of open coding + * duplication of @c dirent objects, because the actual @c struct @c dirent + * size may be bigger or shorter than @c sizeof(struct dirent) and correct + * handling is platform specific (see gitlab issue #841). + * + * @dent - original directory entry to be duplicated + * @returns duplicated directory entry which should be freed with g_free() + */ +struct dirent *qemu_dirent_dup(struct dirent *dent); + #ifdef __cplusplus } #endif diff --git a/include/standard-headers/asm-x86/kvm_para.h b/include/standard-headers/asm-x86/kvm_para.h index 204cfb8..f0235e5 100644 --- a/include/standard-headers/asm-x86/kvm_para.h +++ b/include/standard-headers/asm-x86/kvm_para.h @@ -8,6 +8,7 @@ * should be used to determine that a VM is running under KVM. */ #define KVM_CPUID_SIGNATURE 0x40000000 +#define KVM_SIGNATURE "KVMKVMKVM\0\0\0" /* This CPUID returns two feature bitmaps in eax, edx. Before enabling * a particular paravirtualization, the appropriate feature bit should diff --git a/include/standard-headers/drm/drm_fourcc.h b/include/standard-headers/drm/drm_fourcc.h index 2c025cb..4888f85 100644 --- a/include/standard-headers/drm/drm_fourcc.h +++ b/include/standard-headers/drm/drm_fourcc.h @@ -313,6 +313,13 @@ extern "C" { */ #define DRM_FORMAT_P016 fourcc_code('P', '0', '1', '6') /* 2x2 subsampled Cr:Cb plane 16 bits per channel */ +/* 2 plane YCbCr420. + * 3 10 bit components and 2 padding bits packed into 4 bytes. + * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian + * index 1 = Cr:Cb plane, [63:0] x:Cr2:Cb2:Cr1:x:Cb1:Cr0:Cb0 [2:10:10:10:2:10:10:10] little endian + */ +#define DRM_FORMAT_P030 fourcc_code('P', '0', '3', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel packed */ + /* 3 plane non-subsampled (444) YCbCr * 16 bits per component, but only 10 bits are used and 6 bits are padded * index 0: Y plane, [15:0] Y:x [10:6] little endian @@ -853,6 +860,10 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier) * and UV. Some SAND-using hardware stores UV in a separate tiled * image from Y to reduce the column height, which is not supported * with these modifiers. + * + * The DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT modifier is also + * supported for DRM_FORMAT_P030 where the columns remain as 128 bytes + * wide, but as this is a 10 bpp format that translates to 96 pixels. */ #define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \ diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index 688eb8d..38d5a4c 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -231,6 +231,7 @@ enum tunable_id { ETHTOOL_RX_COPYBREAK, ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ + ETHTOOL_TX_COPYBREAK_BUF_SIZE, /* * Add your fresh new tunable attribute above and remember to update * tunable_strings[] in net/ethtool/common.c diff --git a/include/standard-headers/linux/fuse.h b/include/standard-headers/linux/fuse.h index 23ea317..bda0625 100644 --- a/include/standard-headers/linux/fuse.h +++ b/include/standard-headers/linux/fuse.h @@ -184,6 +184,16 @@ * * 7.34 * - add FUSE_SYNCFS + * + * 7.35 + * - add FOPEN_NOFLUSH + * + * 7.36 + * - extend fuse_init_in with reserved fields, add FUSE_INIT_EXT init flag + * - add flags2 to fuse_init_in and fuse_init_out + * - add FUSE_SECURITY_CTX init flag + * - add security context to create, mkdir, symlink, and mknod requests + * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX */ #ifndef _LINUX_FUSE_H @@ -215,7 +225,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 34 +#define FUSE_KERNEL_MINOR_VERSION 36 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -286,12 +296,14 @@ struct fuse_file_lock { * FOPEN_NONSEEKABLE: the file is not seekable * FOPEN_CACHE_DIR: allow caching this directory * FOPEN_STREAM: the file is stream-like (no file position at all) + * FOPEN_NOFLUSH: don't flush data cache on close (unless FUSE_WRITEBACK_CACHE) */ #define FOPEN_DIRECT_IO (1 << 0) #define FOPEN_KEEP_CACHE (1 << 1) #define FOPEN_NONSEEKABLE (1 << 2) #define FOPEN_CACHE_DIR (1 << 3) #define FOPEN_STREAM (1 << 4) +#define FOPEN_NOFLUSH (1 << 5) /** * INIT request/reply flags @@ -332,6 +344,11 @@ struct fuse_file_lock { * write/truncate sgid is killed only if file has group * execute permission. (Same as Linux VFS behavior). * FUSE_SETXATTR_EXT: Server supports extended struct fuse_setxattr_in + * FUSE_INIT_EXT: extended fuse_init_in request + * FUSE_INIT_RESERVED: reserved, do not use + * FUSE_SECURITY_CTX: add security context to create, mkdir, symlink, and + * mknod + * FUSE_HAS_INODE_DAX: use per inode DAX */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -363,6 +380,11 @@ struct fuse_file_lock { #define FUSE_SUBMOUNTS (1 << 27) #define FUSE_HANDLE_KILLPRIV_V2 (1 << 28) #define FUSE_SETXATTR_EXT (1 << 29) +#define FUSE_INIT_EXT (1 << 30) +#define FUSE_INIT_RESERVED (1 << 31) +/* bits 32..63 get shifted down 32 bits into the flags2 field */ +#define FUSE_SECURITY_CTX (1ULL << 32) +#define FUSE_HAS_INODE_DAX (1ULL << 33) /** * CUSE INIT request/reply flags @@ -445,8 +467,10 @@ struct fuse_file_lock { * fuse_attr flags * * FUSE_ATTR_SUBMOUNT: Object is a submount root + * FUSE_ATTR_DAX: Enable DAX for this file in per inode DAX mode */ #define FUSE_ATTR_SUBMOUNT (1 << 0) +#define FUSE_ATTR_DAX (1 << 1) /** * Open flags @@ -732,6 +756,8 @@ struct fuse_init_in { uint32_t minor; uint32_t max_readahead; uint32_t flags; + uint32_t flags2; + uint32_t unused[11]; }; #define FUSE_COMPAT_INIT_OUT_SIZE 8 @@ -748,7 +774,8 @@ struct fuse_init_out { uint32_t time_gran; uint16_t max_pages; uint16_t map_alignment; - uint32_t unused[8]; + uint32_t flags2; + uint32_t unused[7]; }; #define CUSE_INIT_INFO_MAX 4096 @@ -856,9 +883,12 @@ struct fuse_dirent { char name[]; }; -#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) -#define FUSE_DIRENT_ALIGN(x) \ +/* Align variable length records to 64bit boundary */ +#define FUSE_REC_ALIGN(x) \ (((x) + sizeof(uint64_t) - 1) & ~(sizeof(uint64_t) - 1)) + +#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) +#define FUSE_DIRENT_ALIGN(x) FUSE_REC_ALIGN(x) #define FUSE_DIRENT_SIZE(d) \ FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) @@ -975,4 +1005,26 @@ struct fuse_syncfs_in { uint64_t padding; }; +/* + * For each security context, send fuse_secctx with size of security context + * fuse_secctx will be followed by security context name and this in turn + * will be followed by actual context label. + * fuse_secctx, name, context + */ +struct fuse_secctx { + uint32_t size; + uint32_t padding; +}; + +/* + * Contains the information about how many fuse_secctx structures are being + * sent and what's the total size of all security contexts (including + * size of fuse_secctx_header). + * + */ +struct fuse_secctx_header { + uint32_t size; + uint32_t nr_secctx; +}; + #endif /* _LINUX_FUSE_H */ diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index ff6ccbc..bee1a9e 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -301,23 +301,23 @@ #define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ #define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ -/* Message Signalled Interrupt registers */ +/* Message Signaled Interrupt registers */ -#define PCI_MSI_FLAGS 2 /* Message Control */ +#define PCI_MSI_FLAGS 0x02 /* Message Control */ #define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */ #define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */ #define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */ #define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */ #define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */ #define PCI_MSI_RFU 3 /* Rest of capability flags */ -#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ -#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ -#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ -#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ -#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */ -#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ -#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ -#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ +#define PCI_MSI_ADDRESS_LO 0x04 /* Lower 32 bits */ +#define PCI_MSI_ADDRESS_HI 0x08 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ +#define PCI_MSI_DATA_32 0x08 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_MASK_32 0x0c /* Mask bits register for 32-bit devices */ +#define PCI_MSI_PENDING_32 0x10 /* Pending intrs for 32-bit devices */ +#define PCI_MSI_DATA_64 0x0c /* 16 bits of data for 64-bit devices */ +#define PCI_MSI_MASK_64 0x10 /* Mask bits register for 64-bit devices */ +#define PCI_MSI_PENDING_64 0x14 /* Pending intrs for 64-bit devices */ /* MSI-X registers (in MSI-X capability) */ #define PCI_MSIX_FLAGS 2 /* Message Control */ @@ -335,10 +335,10 @@ /* MSI-X Table entry format (in memory mapped by a BAR) */ #define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR 0 /* Message Address */ -#define PCI_MSIX_ENTRY_UPPER_ADDR 4 /* Message Upper Address */ -#define PCI_MSIX_ENTRY_DATA 8 /* Message Data */ -#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 /* Vector Control */ +#define PCI_MSIX_ENTRY_LOWER_ADDR 0x0 /* Message Address */ +#define PCI_MSIX_ENTRY_UPPER_ADDR 0x4 /* Message Upper Address */ +#define PCI_MSIX_ENTRY_DATA 0x8 /* Message Data */ +#define PCI_MSIX_ENTRY_VECTOR_CTRL 0xc /* Vector Control */ #define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001 /* CompactPCI Hotswap Register */ @@ -470,7 +470,7 @@ /* PCI Express capability registers */ -#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS 0x02 /* Capabilities register */ #define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ #define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ #define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ @@ -484,7 +484,7 @@ #define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ -#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVCAP 0x04 /* Device capabilities */ #define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ #define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ #define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */ @@ -497,7 +497,7 @@ #define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */ #define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */ #define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ -#define PCI_EXP_DEVCTL 8 /* Device Control */ +#define PCI_EXP_DEVCTL 0x08 /* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ #define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ #define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ @@ -522,7 +522,7 @@ #define PCI_EXP_DEVCTL_READRQ_2048B 0x4000 /* 2048 Bytes */ #define PCI_EXP_DEVCTL_READRQ_4096B 0x5000 /* 4096 Bytes */ #define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ -#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define PCI_EXP_DEVSTA 0x0a /* Device Status */ #define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */ #define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */ #define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */ @@ -530,7 +530,7 @@ #define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ #define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ #define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */ -#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCAP 0x0c /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ #define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ #define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ @@ -549,7 +549,7 @@ #define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ #define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ -#define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKCTL 0x10 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ #define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */ #define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */ @@ -562,7 +562,7 @@ #define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ #define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ #define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */ -#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_LNKSTA 0x12 /* Link Status */ #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ #define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */ #define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ @@ -582,7 +582,7 @@ #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints with link end here */ -#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCAP 0x14 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ #define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */ @@ -595,7 +595,7 @@ #define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */ #define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */ #define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ -#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTCTL 0x18 /* Slot Control */ #define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */ #define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */ #define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */ @@ -617,7 +617,7 @@ #define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ #define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ #define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */ -#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_SLTSTA 0x1a /* Slot Status */ #define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ #define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */ #define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */ @@ -627,15 +627,15 @@ #define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ #define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ #define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ -#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCTL 0x1c /* Root Control */ #define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */ #define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */ #define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */ #define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ #define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ -#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTCAP 0x1e /* Root Capabilities */ #define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */ -#define PCI_EXP_RTSTA 32 /* Root Status */ +#define PCI_EXP_RTSTA 0x20 /* Root Status */ #define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ #define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ /* @@ -646,7 +646,7 @@ * Use pcie_capability_read_word() and similar interfaces to use them * safely. */ -#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCAP2 0x24 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2_COMP_TMOUT_DIS 0x00000010 /* Completion Timeout Disable supported */ #define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */ #define PCI_EXP_DEVCAP2_ATOMIC_ROUTE 0x00000040 /* Atomic Op routing */ @@ -658,7 +658,7 @@ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ #define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ -#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ +#define PCI_EXP_DEVCTL2 0x28 /* Device Control 2 */ #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ #define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */ #define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ @@ -670,9 +670,9 @@ #define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */ #define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ #define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ -#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ -#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */ -#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ +#define PCI_EXP_DEVSTA2 0x2a /* Device Status 2 */ +#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 0x2c /* end of v2 EPs w/o link */ +#define PCI_EXP_LNKCAP2 0x2c /* Link Capabilities 2 */ #define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ #define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */ #define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */ @@ -680,7 +680,7 @@ #define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */ #define PCI_EXP_LNKCAP2_SLS_64_0GB 0x00000040 /* Supported Speed 64GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ -#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ +#define PCI_EXP_LNKCTL2 0x30 /* Link Control 2 */ #define PCI_EXP_LNKCTL2_TLS 0x000f #define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */ #define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ @@ -691,12 +691,12 @@ #define PCI_EXP_LNKCTL2_ENTER_COMP 0x0010 /* Enter Compliance */ #define PCI_EXP_LNKCTL2_TX_MARGIN 0x0380 /* Transmit Margin */ #define PCI_EXP_LNKCTL2_HASD 0x0020 /* HW Autonomous Speed Disable */ -#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ -#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ +#define PCI_EXP_LNKSTA2 0x32 /* Link Status 2 */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 0x32 /* end of v2 EPs w/ link */ +#define PCI_EXP_SLTCAP2 0x34 /* Slot Capabilities 2 */ #define PCI_EXP_SLTCAP2_IBPD 0x00000001 /* In-band PD Disable Supported */ -#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ -#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */ +#define PCI_EXP_SLTCTL2 0x38 /* Slot Control 2 */ +#define PCI_EXP_SLTSTA2 0x3a /* Slot Status 2 */ /* Extended Capabilities (PCI-X 2.0 and Express) */ #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) @@ -742,7 +742,7 @@ #define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 /* Advanced Error Reporting */ -#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ +#define PCI_ERR_UNCOR_STATUS 0x04 /* Uncorrectable Error Status */ #define PCI_ERR_UNC_UND 0x00000001 /* Undefined */ #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ #define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ @@ -760,11 +760,11 @@ #define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */ #define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */ #define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */ -#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ +#define PCI_ERR_UNCOR_MASK 0x08 /* Uncorrectable Error Mask */ /* Same bits as above */ -#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ +#define PCI_ERR_UNCOR_SEVER 0x0c /* Uncorrectable Error Severity */ /* Same bits as above */ -#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ +#define PCI_ERR_COR_STATUS 0x10 /* Correctable Error Status */ #define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ #define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ #define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ @@ -773,20 +773,20 @@ #define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */ #define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */ #define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */ -#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ +#define PCI_ERR_COR_MASK 0x14 /* Correctable Error Mask */ /* Same bits as above */ -#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ -#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ +#define PCI_ERR_CAP 0x18 /* Advanced Error Capabilities & Ctrl*/ +#define PCI_ERR_CAP_FEP(x) ((x) & 0x1f) /* First Error Pointer */ #define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ #define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ #define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ -#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ -#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +#define PCI_ERR_HEADER_LOG 0x1c /* Header Log Register (16 bytes) */ +#define PCI_ERR_ROOT_COMMAND 0x2c /* Root Error Command */ #define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ #define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */ #define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_STATUS 0x30 #define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ #define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */ #define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */ @@ -795,52 +795,52 @@ #define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ #define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ #define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ -#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ +#define PCI_ERR_ROOT_ERR_SRC 0x34 /* Error Source Identification */ /* Virtual Channel */ -#define PCI_VC_PORT_CAP1 4 +#define PCI_VC_PORT_CAP1 0x04 #define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */ #define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */ #define PCI_VC_CAP1_ARB_SIZE 0x00000c00 -#define PCI_VC_PORT_CAP2 8 +#define PCI_VC_PORT_CAP2 0x08 #define PCI_VC_CAP2_32_PHASE 0x00000002 #define PCI_VC_CAP2_64_PHASE 0x00000004 #define PCI_VC_CAP2_128_PHASE 0x00000008 #define PCI_VC_CAP2_ARB_OFF 0xff000000 -#define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_CTRL 0x0c #define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001 -#define PCI_VC_PORT_STATUS 14 +#define PCI_VC_PORT_STATUS 0x0e #define PCI_VC_PORT_STATUS_TABLE 0x00000001 -#define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CAP 0x10 #define PCI_VC_RES_CAP_32_PHASE 0x00000002 #define PCI_VC_RES_CAP_64_PHASE 0x00000004 #define PCI_VC_RES_CAP_128_PHASE 0x00000008 #define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010 #define PCI_VC_RES_CAP_256_PHASE 0x00000020 #define PCI_VC_RES_CAP_ARB_OFF 0xff000000 -#define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_CTRL 0x14 #define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000 #define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000 #define PCI_VC_RES_CTRL_ID 0x07000000 #define PCI_VC_RES_CTRL_ENABLE 0x80000000 -#define PCI_VC_RES_STATUS 26 +#define PCI_VC_RES_STATUS 0x1a #define PCI_VC_RES_STATUS_TABLE 0x00000001 #define PCI_VC_RES_STATUS_NEGO 0x00000002 #define PCI_CAP_VC_BASE_SIZEOF 0x10 -#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C +#define PCI_CAP_VC_PER_VC_SIZEOF 0x0c /* Power Budgeting */ -#define PCI_PWR_DSR 4 /* Data Select Register */ -#define PCI_PWR_DATA 8 /* Data Register */ +#define PCI_PWR_DSR 0x04 /* Data Select Register */ +#define PCI_PWR_DATA 0x08 /* Data Register */ #define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ #define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ #define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ #define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ #define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ #define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ -#define PCI_PWR_CAP 12 /* Capability */ +#define PCI_PWR_CAP 0x0c /* Capability */ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ -#define PCI_EXT_CAP_PWR_SIZEOF 16 +#define PCI_EXT_CAP_PWR_SIZEOF 0x10 /* Root Complex Event Collector Endpoint Association */ #define PCI_RCEC_RCIEP_BITMAP 4 /* Associated Bitmap for RCiEPs */ @@ -964,7 +964,7 @@ #define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ #define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ #define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ -#define PCI_EXT_CAP_SRIOV_SIZEOF 64 +#define PCI_EXT_CAP_SRIOV_SIZEOF 0x40 #define PCI_LTR_MAX_SNOOP_LAT 0x4 #define PCI_LTR_MAX_NOSNOOP_LAT 0x6 @@ -1017,12 +1017,12 @@ #define PCI_TPH_LOC_NONE 0x000 /* no location */ #define PCI_TPH_LOC_CAP 0x200 /* in capability */ #define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ -#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */ -#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */ -#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */ +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* ST table mask */ +#define PCI_TPH_CAP_ST_SHIFT 16 /* ST table shift */ +#define PCI_TPH_BASE_SIZEOF 0xc /* size with no ST table */ /* Downstream Port Containment */ -#define PCI_EXP_DPC_CAP 4 /* DPC Capability */ +#define PCI_EXP_DPC_CAP 0x04 /* DPC Capability */ #define PCI_EXP_DPC_IRQ 0x001F /* Interrupt Message Number */ #define PCI_EXP_DPC_CAP_RP_EXT 0x0020 /* Root Port Extensions */ #define PCI_EXP_DPC_CAP_POISONED_TLP 0x0040 /* Poisoned TLP Egress Blocking Supported */ @@ -1030,19 +1030,19 @@ #define PCI_EXP_DPC_RP_PIO_LOG_SIZE 0x0F00 /* RP PIO Log Size */ #define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */ -#define PCI_EXP_DPC_CTL 6 /* DPC control */ +#define PCI_EXP_DPC_CTL 0x06 /* DPC control */ #define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */ #define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */ #define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */ -#define PCI_EXP_DPC_STATUS 8 /* DPC Status */ +#define PCI_EXP_DPC_STATUS 0x08 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x0001 /* Trigger Status */ #define PCI_EXP_DPC_STATUS_TRIGGER_RSN 0x0006 /* Trigger Reason */ #define PCI_EXP_DPC_STATUS_INTERRUPT 0x0008 /* Interrupt Status */ #define PCI_EXP_DPC_RP_BUSY 0x0010 /* Root Port Busy */ #define PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT 0x0060 /* Trig Reason Extension */ -#define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */ +#define PCI_EXP_DPC_SOURCE_ID 0x0A /* DPC Source Identifier */ #define PCI_EXP_DPC_RP_PIO_STATUS 0x0C /* RP PIO Status */ #define PCI_EXP_DPC_RP_PIO_MASK 0x10 /* RP PIO Mask */ @@ -1086,7 +1086,11 @@ /* Designated Vendor-Specific (DVSEC, PCI_EXT_CAP_ID_DVSEC) */ #define PCI_DVSEC_HEADER1 0x4 /* Designated Vendor-Specific Header1 */ +#define PCI_DVSEC_HEADER1_VID(x) ((x) & 0xffff) +#define PCI_DVSEC_HEADER1_REV(x) (((x) >> 16) & 0xf) +#define PCI_DVSEC_HEADER1_LEN(x) (((x) >> 20) & 0xfff) #define PCI_DVSEC_HEADER2 0x8 /* Designated Vendor-Specific Header2 */ +#define PCI_DVSEC_HEADER2_ID(x) ((x) & 0xffff) /* Data Link Feature */ #define PCI_DLF_CAP 0x04 /* Capabilities Register */ diff --git a/include/standard-headers/linux/virtio_gpio.h b/include/standard-headers/linux/virtio_gpio.h new file mode 100644 index 0000000..2b5cf06 --- /dev/null +++ b/include/standard-headers/linux/virtio_gpio.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _LINUX_VIRTIO_GPIO_H +#define _LINUX_VIRTIO_GPIO_H + +#include "standard-headers/linux/types.h" + +/* Virtio GPIO Feature bits */ +#define VIRTIO_GPIO_F_IRQ 0 + +/* Virtio GPIO request types */ +#define VIRTIO_GPIO_MSG_GET_NAMES 0x0001 +#define VIRTIO_GPIO_MSG_GET_DIRECTION 0x0002 +#define VIRTIO_GPIO_MSG_SET_DIRECTION 0x0003 +#define VIRTIO_GPIO_MSG_GET_VALUE 0x0004 +#define VIRTIO_GPIO_MSG_SET_VALUE 0x0005 +#define VIRTIO_GPIO_MSG_IRQ_TYPE 0x0006 + +/* Possible values of the status field */ +#define VIRTIO_GPIO_STATUS_OK 0x0 +#define VIRTIO_GPIO_STATUS_ERR 0x1 + +/* Direction types */ +#define VIRTIO_GPIO_DIRECTION_NONE 0x00 +#define VIRTIO_GPIO_DIRECTION_OUT 0x01 +#define VIRTIO_GPIO_DIRECTION_IN 0x02 + +/* Virtio GPIO IRQ types */ +#define VIRTIO_GPIO_IRQ_TYPE_NONE 0x00 +#define VIRTIO_GPIO_IRQ_TYPE_EDGE_RISING 0x01 +#define VIRTIO_GPIO_IRQ_TYPE_EDGE_FALLING 0x02 +#define VIRTIO_GPIO_IRQ_TYPE_EDGE_BOTH 0x03 +#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_HIGH 0x04 +#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_LOW 0x08 + +struct virtio_gpio_config { + uint16_t ngpio; + uint8_t padding[2]; + uint32_t gpio_names_size; +}; + +/* Virtio GPIO Request / Response */ +struct virtio_gpio_request { + uint16_t type; + uint16_t gpio; + uint32_t value; +}; + +struct virtio_gpio_response { + uint8_t status; + uint8_t value; +}; + +struct virtio_gpio_response_get_names { + uint8_t status; + uint8_t value[]; +}; + +/* Virtio GPIO IRQ Request / Response */ +struct virtio_gpio_irq_request { + uint16_t gpio; +}; + +struct virtio_gpio_irq_response { + uint8_t status; +}; + +/* Possible values of the interrupt status field */ +#define VIRTIO_GPIO_IRQ_STATUS_INVALID 0x0 +#define VIRTIO_GPIO_IRQ_STATUS_VALID 0x1 + +#endif /* _LINUX_VIRTIO_GPIO_H */ diff --git a/include/standard-headers/linux/virtio_i2c.h b/include/standard-headers/linux/virtio_i2c.h new file mode 100644 index 0000000..09fa907 --- /dev/null +++ b/include/standard-headers/linux/virtio_i2c.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */ +/* + * Definitions for virtio I2C Adpter + * + * Copyright (c) 2021 Intel Corporation. All rights reserved. + */ + +#ifndef _LINUX_VIRTIO_I2C_H +#define _LINUX_VIRTIO_I2C_H + +#include "standard-headers/linux/const.h" +#include "standard-headers/linux/types.h" + +/* Virtio I2C Feature bits */ +#define VIRTIO_I2C_F_ZERO_LENGTH_REQUEST 0 + +/* The bit 0 of the @virtio_i2c_out_hdr.@flags, used to group the requests */ +#define VIRTIO_I2C_FLAGS_FAIL_NEXT _BITUL(0) + +/* The bit 1 of the @virtio_i2c_out_hdr.@flags, used to mark a buffer as read */ +#define VIRTIO_I2C_FLAGS_M_RD _BITUL(1) + +/** + * struct virtio_i2c_out_hdr - the virtio I2C message OUT header + * @addr: the controlled device address + * @padding: used to pad to full dword + * @flags: used for feature extensibility + */ +struct virtio_i2c_out_hdr { + uint16_t addr; + uint16_t padding; + uint32_t flags; +}; + +/** + * struct virtio_i2c_in_hdr - the virtio I2C message IN header + * @status: the processing result from the backend + */ +struct virtio_i2c_in_hdr { + uint8_t status; +}; + +/* The final status written by the device */ +#define VIRTIO_I2C_MSG_OK 0 +#define VIRTIO_I2C_MSG_ERR 1 + +#endif /* _LINUX_VIRTIO_I2C_H */ diff --git a/include/standard-headers/linux/virtio_iommu.h b/include/standard-headers/linux/virtio_iommu.h index b9443b8..366379c 100644 --- a/include/standard-headers/linux/virtio_iommu.h +++ b/include/standard-headers/linux/virtio_iommu.h @@ -16,6 +16,7 @@ #define VIRTIO_IOMMU_F_BYPASS 3 #define VIRTIO_IOMMU_F_PROBE 4 #define VIRTIO_IOMMU_F_MMIO 5 +#define VIRTIO_IOMMU_F_BYPASS_CONFIG 6 struct virtio_iommu_range_64 { uint64_t start; @@ -36,6 +37,8 @@ struct virtio_iommu_config { struct virtio_iommu_range_32 domain_range; /* Probe buffer size */ uint32_t probe_size; + uint8_t bypass; + uint8_t reserved[3]; }; /* Request types */ @@ -66,11 +69,14 @@ struct virtio_iommu_req_tail { uint8_t reserved[3]; }; +#define VIRTIO_IOMMU_ATTACH_F_BYPASS (1 << 0) + struct virtio_iommu_req_attach { struct virtio_iommu_req_head head; uint32_t domain; uint32_t endpoint; - uint8_t reserved[8]; + uint32_t flags; + uint8_t reserved[4]; struct virtio_iommu_req_tail tail; }; diff --git a/include/standard-headers/linux/virtio_pcidev.h b/include/standard-headers/linux/virtio_pcidev.h new file mode 100644 index 0000000..bdf1d06 --- /dev/null +++ b/include/standard-headers/linux/virtio_pcidev.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * Copyright (C) 2021 Intel Corporation + * Author: Johannes Berg <johannes@sipsolutions.net> + */ +#ifndef _LINUX_VIRTIO_PCIDEV_H +#define _LINUX_VIRTIO_PCIDEV_H +#include "standard-headers/linux/types.h" + +/** + * enum virtio_pcidev_ops - virtual PCI device operations + * @VIRTIO_PCIDEV_OP_RESERVED: reserved to catch errors + * @VIRTIO_PCIDEV_OP_CFG_READ: read config space, size is 1, 2, 4 or 8; + * the @data field should be filled in by the device (in little endian). + * @VIRTIO_PCIDEV_OP_CFG_WRITE: write config space, size is 1, 2, 4 or 8; + * the @data field contains the data to write (in little endian). + * @VIRTIO_PCIDEV_OP_MMIO_READ: read BAR mem/pio, size can be variable; + * the @data field should be filled in by the device (in little endian). + * @VIRTIO_PCIDEV_OP_MMIO_WRITE: write BAR mem/pio, size can be variable; + * the @data field contains the data to write (in little endian). + * @VIRTIO_PCIDEV_OP_MMIO_MEMSET: memset MMIO, size is variable but + * the @data field only has one byte (unlike @VIRTIO_PCIDEV_OP_MMIO_WRITE) + * @VIRTIO_PCIDEV_OP_INT: legacy INTx# pin interrupt, the addr field is 1-4 for + * the number + * @VIRTIO_PCIDEV_OP_MSI: MSI(-X) interrupt, this message basically transports + * the 16- or 32-bit write that would otherwise be done into memory, + * analogous to the write messages (@VIRTIO_PCIDEV_OP_MMIO_WRITE) above + * @VIRTIO_PCIDEV_OP_PME: Dummy message whose content is ignored (and should be + * all zeroes) to signal the PME# pin. + */ +enum virtio_pcidev_ops { + VIRTIO_PCIDEV_OP_RESERVED = 0, + VIRTIO_PCIDEV_OP_CFG_READ, + VIRTIO_PCIDEV_OP_CFG_WRITE, + VIRTIO_PCIDEV_OP_MMIO_READ, + VIRTIO_PCIDEV_OP_MMIO_WRITE, + VIRTIO_PCIDEV_OP_MMIO_MEMSET, + VIRTIO_PCIDEV_OP_INT, + VIRTIO_PCIDEV_OP_MSI, + VIRTIO_PCIDEV_OP_PME, +}; + +/** + * struct virtio_pcidev_msg - virtio PCI device operation + * @op: the operation to do + * @bar: the bar (only with BAR read/write messages) + * @reserved: reserved + * @size: the size of the read/write (in bytes) + * @addr: the address to read/write + * @data: the data, normally @size long, but just one byte for + * %VIRTIO_PCIDEV_OP_MMIO_MEMSET + * + * Note: the fields are all in native (CPU) endian, however, the + * @data values will often be in little endian (see the ops above.) + */ +struct virtio_pcidev_msg { + uint8_t op; + uint8_t bar; + uint16_t reserved; + uint32_t size; + uint64_t addr; + uint8_t data[]; +}; + +#endif /* _LINUX_VIRTIO_PCIDEV_H */ diff --git a/include/standard-headers/linux/virtio_scmi.h b/include/standard-headers/linux/virtio_scmi.h new file mode 100644 index 0000000..8f2c305 --- /dev/null +++ b/include/standard-headers/linux/virtio_scmi.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * Copyright (C) 2020-2021 OpenSynergy GmbH + * Copyright (C) 2021 ARM Ltd. + */ + +#ifndef _LINUX_VIRTIO_SCMI_H +#define _LINUX_VIRTIO_SCMI_H + +#include "standard-headers/linux/virtio_types.h" + +/* Device implements some SCMI notifications, or delayed responses. */ +#define VIRTIO_SCMI_F_P2A_CHANNELS 0 + +/* Device implements any SCMI statistics shared memory region */ +#define VIRTIO_SCMI_F_SHARED_MEMORY 1 + +/* Virtqueues */ + +#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */ +#define VIRTIO_SCMI_VQ_RX 1 /* eventq */ +#define VIRTIO_SCMI_VQ_MAX_CNT 2 + +#endif /* _LINUX_VIRTIO_SCMI_H */ |