diff options
Diffstat (limited to 'include/hw/ppc/spapr.h')
| -rw-r--r-- | include/hw/ppc/spapr.h | 358 |
1 files changed, 358 insertions, 0 deletions
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h new file mode 100644 index 0000000..864bee9 --- /dev/null +++ b/include/hw/ppc/spapr.h @@ -0,0 +1,358 @@ +#if !defined(__HW_SPAPR_H__) +#define __HW_SPAPR_H__ + +#include "sysemu/dma.h" +#include "hw/ppc/xics.h" + +struct VIOsPAPRBus; +struct sPAPRPHBState; +struct sPAPRNVRAM; +struct icp_state; + +typedef struct sPAPREnvironment { + struct VIOsPAPRBus *vio_bus; + QLIST_HEAD(, sPAPRPHBState) phbs; + struct sPAPRNVRAM *nvram; + struct icp_state *icp; + + hwaddr ram_limit; + void *htab; + long htab_shift; + hwaddr rma_size; + int vrma_adjust; + hwaddr fdt_addr, rtas_addr; + long rtas_size; + void *fdt_skel; + target_ulong entry_point; + int next_irq; + int rtc_offset; + char *cpu_model; + bool has_graphics; + + uint32_t epow_irq; + Notifier epow_notifier; +} sPAPREnvironment; + +#define H_SUCCESS 0 +#define H_BUSY 1 /* Hardware busy -- retry later */ +#define H_CLOSED 2 /* Resource closed */ +#define H_NOT_AVAILABLE 3 +#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ +#define H_PARTIAL 5 +#define H_IN_PROGRESS 14 /* Kind of like busy */ +#define H_PAGE_REGISTERED 15 +#define H_PARTIAL_STORE 16 +#define H_PENDING 17 /* returned from H_POLL_PENDING */ +#define H_CONTINUE 18 /* Returned from H_Join on success */ +#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ +#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ + is a good time to retry */ +#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ +#define H_HARDWARE -1 /* Hardware error */ +#define H_FUNCTION -2 /* Function not supported */ +#define H_PRIVILEGE -3 /* Caller not privileged */ +#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_BAD_MODE -5 /* Illegal msr value */ +#define H_PTEG_FULL -6 /* PTEG is full */ +#define H_NOT_FOUND -7 /* PTE was not found" */ +#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NO_MEM -9 +#define H_AUTHORITY -10 +#define H_PERMISSION -11 +#define H_DROPPED -12 +#define H_SOURCE_PARM -13 +#define H_DEST_PARM -14 +#define H_REMOTE_PARM -15 +#define H_RESOURCE -16 +#define H_ADAPTER_PARM -17 +#define H_RH_PARM -18 +#define H_RCQ_PARM -19 +#define H_SCQ_PARM -20 +#define H_EQ_PARM -21 +#define H_RT_PARM -22 +#define H_ST_PARM -23 +#define H_SIGT_PARM -24 +#define H_TOKEN_PARM -25 +#define H_MLENGTH_PARM -27 +#define H_MEM_PARM -28 +#define H_MEM_ACCESS_PARM -29 +#define H_ATTR_PARM -30 +#define H_PORT_PARM -31 +#define H_MCG_PARM -32 +#define H_VL_PARM -33 +#define H_TSIZE_PARM -34 +#define H_TRACE_PARM -35 + +#define H_MASK_PARM -37 +#define H_MCG_FULL -38 +#define H_ALIAS_EXIST -39 +#define H_P_COUNTER -40 +#define H_TABLE_FULL -41 +#define H_ALT_TABLE -42 +#define H_MR_CONDITION -43 +#define H_NOT_ENOUGH_RESOURCES -44 +#define H_R_STATE -45 +#define H_RESCINDEND -46 +#define H_MULTI_THREADS_ACTIVE -9005 + + +/* Long Busy is a condition that can be returned by the firmware + * when a call cannot be completed now, but the identical call + * should be retried later. This prevents calls blocking in the + * firmware for long periods of time. Annoyingly the firmware can return + * a range of return codes, hinting at how long we should wait before + * retrying. If you don't care for the hint, the macro below is a good + * way to check for the long_busy return codes + */ +#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ + && (x <= H_LONG_BUSY_END_RANGE)) + +/* Flags */ +#define H_LARGE_PAGE (1ULL<<(63-16)) +#define H_EXACT (1ULL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ +#define H_R_XLATE (1ULL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ +#define H_READ_4 (1ULL<<(63-26)) /* Return 4 PTEs */ +#define H_PAGE_STATE_CHANGE (1ULL<<(63-28)) +#define H_PAGE_UNUSED ((1ULL<<(63-29)) | (1ULL<<(63-30))) +#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) +#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31))) +#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE +#define H_AVPN (1ULL<<(63-32)) /* An avpn is provided as a sanity test */ +#define H_ANDCOND (1ULL<<(63-33)) +#define H_ICACHE_INVALIDATE (1ULL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ +#define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ +#define H_ZERO_PAGE (1ULL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ +#define H_COPY_PAGE (1ULL<<(63-49)) +#define H_N (1ULL<<(63-61)) +#define H_PP1 (1ULL<<(63-62)) +#define H_PP2 (1ULL<<(63-63)) + +/* VASI States */ +#define H_VASI_INVALID 0 +#define H_VASI_ENABLED 1 +#define H_VASI_ABORTED 2 +#define H_VASI_SUSPENDING 3 +#define H_VASI_SUSPENDED 4 +#define H_VASI_RESUMED 5 +#define H_VASI_COMPLETED 6 + +/* DABRX flags */ +#define H_DABRX_HYPERVISOR (1ULL<<(63-61)) +#define H_DABRX_KERNEL (1ULL<<(63-62)) +#define H_DABRX_USER (1ULL<<(63-63)) + +/* Each control block has to be on a 4K boundary */ +#define H_CB_ALIGNMENT 4096 + +/* pSeries hypervisor opcodes */ +#define H_REMOVE 0x04 +#define H_ENTER 0x08 +#define H_READ 0x0c +#define H_CLEAR_MOD 0x10 +#define H_CLEAR_REF 0x14 +#define H_PROTECT 0x18 +#define H_GET_TCE 0x1c +#define H_PUT_TCE 0x20 +#define H_SET_SPRG0 0x24 +#define H_SET_DABR 0x28 +#define H_PAGE_INIT 0x2c +#define H_SET_ASR 0x30 +#define H_ASR_ON 0x34 +#define H_ASR_OFF 0x38 +#define H_LOGICAL_CI_LOAD 0x3c +#define H_LOGICAL_CI_STORE 0x40 +#define H_LOGICAL_CACHE_LOAD 0x44 +#define H_LOGICAL_CACHE_STORE 0x48 +#define H_LOGICAL_ICBI 0x4c +#define H_LOGICAL_DCBF 0x50 +#define H_GET_TERM_CHAR 0x54 +#define H_PUT_TERM_CHAR 0x58 +#define H_REAL_TO_LOGICAL 0x5c +#define H_HYPERVISOR_DATA 0x60 +#define H_EOI 0x64 +#define H_CPPR 0x68 +#define H_IPI 0x6c +#define H_IPOLL 0x70 +#define H_XIRR 0x74 +#define H_PERFMON 0x7c +#define H_MIGRATE_DMA 0x78 +#define H_REGISTER_VPA 0xDC +#define H_CEDE 0xE0 +#define H_CONFER 0xE4 +#define H_PROD 0xE8 +#define H_GET_PPP 0xEC +#define H_SET_PPP 0xF0 +#define H_PURR 0xF4 +#define H_PIC 0xF8 +#define H_REG_CRQ 0xFC +#define H_FREE_CRQ 0x100 +#define H_VIO_SIGNAL 0x104 +#define H_SEND_CRQ 0x108 +#define H_COPY_RDMA 0x110 +#define H_REGISTER_LOGICAL_LAN 0x114 +#define H_FREE_LOGICAL_LAN 0x118 +#define H_ADD_LOGICAL_LAN_BUFFER 0x11C +#define H_SEND_LOGICAL_LAN 0x120 +#define H_BULK_REMOVE 0x124 +#define H_MULTICAST_CTRL 0x130 +#define H_SET_XDABR 0x134 +#define H_STUFF_TCE 0x138 +#define H_PUT_TCE_INDIRECT 0x13C +#define H_CHANGE_LOGICAL_LAN_MAC 0x14C +#define H_VTERM_PARTNER_INFO 0x150 +#define H_REGISTER_VTERM 0x154 +#define H_FREE_VTERM 0x158 +#define H_RESET_EVENTS 0x15C +#define H_ALLOC_RESOURCE 0x160 +#define H_FREE_RESOURCE 0x164 +#define H_MODIFY_QP 0x168 +#define H_QUERY_QP 0x16C +#define H_REREGISTER_PMR 0x170 +#define H_REGISTER_SMR 0x174 +#define H_QUERY_MR 0x178 +#define H_QUERY_MW 0x17C +#define H_QUERY_HCA 0x180 +#define H_QUERY_PORT 0x184 +#define H_MODIFY_PORT 0x188 +#define H_DEFINE_AQP1 0x18C +#define H_GET_TRACE_BUFFER 0x190 +#define H_DEFINE_AQP0 0x194 +#define H_RESIZE_MR 0x198 +#define H_ATTACH_MCQP 0x19C +#define H_DETACH_MCQP 0x1A0 +#define H_CREATE_RPT 0x1A4 +#define H_REMOVE_RPT 0x1A8 +#define H_REGISTER_RPAGES 0x1AC +#define H_DISABLE_AND_GETC 0x1B0 +#define H_ERROR_DATA 0x1B4 +#define H_GET_HCA_INFO 0x1B8 +#define H_GET_PERF_COUNT 0x1BC +#define H_MANAGE_TRACE 0x1C0 +#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 +#define H_QUERY_INT_STATE 0x1E4 +#define H_POLL_PENDING 0x1D8 +#define H_ILLAN_ATTRIBUTES 0x244 +#define H_MODIFY_HEA_QP 0x250 +#define H_QUERY_HEA_QP 0x254 +#define H_QUERY_HEA 0x258 +#define H_QUERY_HEA_PORT 0x25C +#define H_MODIFY_HEA_PORT 0x260 +#define H_REG_BCMC 0x264 +#define H_DEREG_BCMC 0x268 +#define H_REGISTER_HEA_RPAGES 0x26C +#define H_DISABLE_AND_GET_HEA 0x270 +#define H_GET_HEA_INFO 0x274 +#define H_ALLOC_HEA_RESOURCE 0x278 +#define H_ADD_CONN 0x284 +#define H_DEL_CONN 0x288 +#define H_JOIN 0x298 +#define H_VASI_STATE 0x2A4 +#define H_ENABLE_CRQ 0x2B0 +#define H_GET_EM_PARMS 0x2B8 +#define H_SET_MPP 0x2D0 +#define H_GET_MPP 0x2D4 +#define MAX_HCALL_OPCODE H_GET_MPP + +/* The hcalls above are standardized in PAPR and implemented by pHyp + * as well. + * + * We also need some hcalls which are specific to qemu / KVM-on-POWER. + * So far we just need one for H_RTAS, but in future we'll need more + * for extensions like virtio. We put those into the 0xf000-0xfffc + * range which is reserved by PAPR for "platform-specific" hcalls. + */ +#define KVMPPC_HCALL_BASE 0xf000 +#define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0) +#define KVMPPC_H_LOGICAL_MEMOP (KVMPPC_HCALL_BASE + 0x1) +#define KVMPPC_HCALL_MAX KVMPPC_H_LOGICAL_MEMOP + +extern sPAPREnvironment *spapr; + +/*#define DEBUG_SPAPR_HCALLS*/ + +#ifdef DEBUG_SPAPR_HCALLS +#define hcall_dprintf(fmt, ...) \ + do { fprintf(stderr, "%s: " fmt, __func__, ## __VA_ARGS__); } while (0) +#else +#define hcall_dprintf(fmt, ...) \ + do { } while (0) +#endif + +typedef target_ulong (*spapr_hcall_fn)(PowerPCCPU *cpu, sPAPREnvironment *spapr, + target_ulong opcode, + target_ulong *args); + +void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn); +target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode, + target_ulong *args); + +int spapr_allocate_irq(int hint, bool lsi); +int spapr_allocate_irq_block(int num, bool lsi); + +static inline int spapr_allocate_msi(int hint) +{ + return spapr_allocate_irq(hint, false); +} + +static inline int spapr_allocate_lsi(int hint) +{ + return spapr_allocate_irq(hint, true); +} + +static inline uint32_t rtas_ld(target_ulong phys, int n) +{ + return ldl_be_phys(phys + 4*n); +} + +static inline void rtas_st(target_ulong phys, int n, uint32_t val) +{ + stl_be_phys(phys + 4*n, val); +} + +typedef void (*spapr_rtas_fn)(sPAPREnvironment *spapr, uint32_t token, + uint32_t nargs, target_ulong args, + uint32_t nret, target_ulong rets); +int spapr_rtas_register(const char *name, spapr_rtas_fn fn); +target_ulong spapr_rtas_call(sPAPREnvironment *spapr, + uint32_t token, uint32_t nargs, target_ulong args, + uint32_t nret, target_ulong rets); +int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr, + hwaddr rtas_size); + +#define SPAPR_TCE_PAGE_SHIFT 12 +#define SPAPR_TCE_PAGE_SIZE (1ULL << SPAPR_TCE_PAGE_SHIFT) +#define SPAPR_TCE_PAGE_MASK (SPAPR_TCE_PAGE_SIZE - 1) + +typedef struct sPAPRTCE { + uint64_t tce; +} sPAPRTCE; + +#define SPAPR_VIO_BASE_LIOBN 0x00000000 +#define SPAPR_PCI_BASE_LIOBN 0x80000000 + +#define RTAS_ERROR_LOG_MAX 2048 + + +void spapr_iommu_init(void); +void spapr_events_init(sPAPREnvironment *spapr); +void spapr_events_fdt_skel(void *fdt, uint32_t epow_irq); +DMAContext *spapr_tce_new_dma_context(uint32_t liobn, size_t window_size); +void spapr_tce_free(DMAContext *dma); +void spapr_tce_reset(DMAContext *dma); +void spapr_tce_set_bypass(DMAContext *dma, bool bypass); +int spapr_dma_dt(void *fdt, int node_off, const char *propname, + uint32_t liobn, uint64_t window, uint32_t size); +int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname, + DMAContext *dma); + +#endif /* !defined (__HW_SPAPR_H__) */ |